Autonomous Electric Vehicle Sharing System Design

Author(s):  
Namwoo Kang ◽  
Fred M. Feinberg ◽  
Panos Y. Papalambros

Car-sharing services promise “green” transportation systems. Two vehicle technologies offer marketable, sustainable sharing: Autonomous vehicles eliminate customer requirements for car pick-up and return, and battery electric vehicles entail zero-emissions. Designing an Autonomous Electric Vehicle (AEV) fleet must account for the relationships among fleet operations, charging station operations, electric powertrain performance, and consumer demand. This paper presents a system design optimization framework integrating four sub-system problems: Fleet size and assignment schedule; number and locations of charging stations; vehicle powertrain requirements; and service fees. A case study for an autonomous fleet operating in Ann Arbor, Michigan, is used to examine AEV sharing system profitability and feasibility for a variety of market scenarios.

2016 ◽  
Vol 139 (1) ◽  
Author(s):  
Namwoo Kang ◽  
Fred M. Feinberg ◽  
Panos Y. Papalambros

Car sharing services promise “green” transportation systems. Two vehicle technologies offer marketable, sustainable sharing: autonomous vehicles (AVs) eliminate customer requirements for car pick-up and return, and battery electric vehicles entail zero emissions. Designing an autonomous electric vehicle (AEV) fleet must account for the relationships among fleet operations, charging station (CS) operations, electric powertrain performance, and consumer demand. This paper presents a system design optimization framework integrating four subsystem problems: fleet size and assignment schedule; number and locations of charging stations; vehicle powertrain requirements; and service fees. We also compare an AEV service and autonomous vehicle (AV) service with gasoline engines. A case study for an autonomous fleet operating in Ann Arbor, MI, is used to examine AEV and AV sharing systems profitability and feasibility for a variety of market scenarios. The results provide practical insights for service system decision makers.


Electronics ◽  
2021 ◽  
Vol 10 (3) ◽  
pp. 260
Author(s):  
Jon Anzola ◽  
Iosu Aizpuru ◽  
Asier Arruti

This paper focuses on the design of a charging unit for an electric vehicle fast charging station. With this purpose, in first place, different solutions that exist for fast charging stations are described through a brief introduction. Then, partial power processing architectures are introduced and proposed as attractive strategies to improve the performance of this type of applications. Furthermore, through a series of simulations, it is observed that partial power processing based converters obtain reduced processed power ratio and efficiency results compared to conventional full power converters. So, with the aim of verifying the conclusions obtained through the simulations, two downscaled prototypes are assembled and tested. Finally, it is concluded that, in case galvanic isolation is not required for the charging unit converter, partial power converters are smaller and more efficient alternatives than conventional full power converters.


2021 ◽  
Vol 13 (11) ◽  
pp. 6163
Author(s):  
Yongyi Huang ◽  
Atsushi Yona ◽  
Hiroshi Takahashi ◽  
Ashraf Mohamed Hemeida ◽  
Paras Mandal ◽  
...  

Electric vehicle charging station have become an urgent need in many communities around the world, due to the increase of using electric vehicles over conventional vehicles. In addition, establishment of charging stations, and the grid impact of household photovoltaic power generation would reduce the feed-in tariff. These two factors are considered to propose setting up charging stations at convenience stores, which would enable the electric energy to be shared between locations. Charging stations could collect excess photovoltaic energy from homes and market it to electric vehicles. This article examines vehicle travel time, basic household energy demand, and the electricity consumption status of Okinawa city as a whole to model the operation of an electric vehicle charging station for a year. The entire program is optimized using MATLAB mixed integer linear programming (MILP) toolbox. The findings demonstrate that a profit could be achieved under the principle of ensuring the charging station’s stable service. Household photovoltaic power generation and electric vehicles are highly dependent on energy sharing between regions. The convenience store charging station service strategy suggested gives a solution to the future issues.


Author(s):  
Venkatesh Boddapati ◽  
S Arul Daniel

Mobility has been changing precipitously in recent years. With the increasing number of electric vehicles (EV), travel-sharing continues to grow, and ultimately, autonomous vehicles (AV) move into municipal fleets. These changes require a new, distributed, digitalised energy system, maintenance, and growing electrification in transportation. This paper proposes the designing of an Electric Vehicle Charging Station (EVCS) by using hybrid energy sources such as solar PV, wind, and diesel generator. The proposed system is mathematically modelled and designed using the Hybrid Optimization Model for Multiple Energy Resources (HOMER). The system is analysed and assessed in both autonomous mode and grid-connected mode of operation. The optimum sizing, energy yields of the system in each case is elaborated, and the best configuration is found for design. The variations in Levelized Cost Of the Energy (LCOE), Net Present Cost (NPC), initial cost, and operating cost of the various configuration are presented. From the results, it is observed that the grid-connected EVCS is more economical than the autonomous EVCS. Further, a sensitivity analysis of the EVCS is also performed.


Energies ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 2820 ◽  
Author(s):  
Hui Sun ◽  
Peng Yuan ◽  
Zhuoning Sun ◽  
Shubo Hu ◽  
Feixiang Peng ◽  
...  

With the popularization of electric vehicles, free charging behaviors of electric vehicle owners can lead to uncertainty about charging in both time and space. A time-spatial dispatching strategy for the distribution network guided by electric vehicle charging fees is proposed in this paper, which aims to solve the network congestion problem caused by the unrestrained and free charging behaviors of large numbers of electric vehicles. In this strategy, congestion severity of different lines is analyzed and the relationship between the congested lines and the charging stations is clarified. A price elastic matrix is introduced to reflect the degree of owners’ response to the charging prices. A pricing scheme for optimal real-time charging fees for multiple charging stations is designed according to the congestion severity of the lines and the charging power of the related charging stations. Charging price at different charging station at different time is different, it can influence the charging behaviors of vehicle owners. The simulation results confirmed that the proposed congestion dispatching strategy considers the earnings of the operators, charging cost to the owners and the satisfaction of the owners. Moreover, the strategy can influence owners to make judicious charging plans that help to solve congestion problems in the network and improve the safety and economy of the power grid.


2019 ◽  
Vol 65 (4) ◽  
pp. 1-9
Author(s):  
Milan Zlatkovic ◽  
Andalib Shams

As traffic congestion increases day by day, it becomes necessary to improve the existing roadway facilities to maintain satisfactory operational and safety performances. New vehicle technologies, such as Connected and Autonomous Vehicles (CAV) have a potential to significantly improve transportation systems. Using the advantages of CAVs, this study developed signalized intersection control strategy algorithm that optimizes the operations of CAVs and allows signal priority for connected platoons. The algorithm was tested in VISSIM microsimulation using a real-world urban corridor. The tested scenarios include a 2040 Do-Nothing scenario, and CAV alternatives with 25%, 50%, 75% and 100% CAV penetration rate. The results show a significant reduction in intersection delays (26% - 38%) and travel times (6% - 20%), depending on the penetration rate, as well as significant improvements on the network-wide level. CAV penetration rates of 50% or more have a potential to significantly improve all operational measures of effectiveness.


2021 ◽  
Vol 4 (3) ◽  
pp. 63
Author(s):  
Sherif A. Zaid ◽  
Hani Albalawi ◽  
Khaled S. Alatawi ◽  
Hassan W. El-Rab ◽  
Mohamed E. El-Shimy ◽  
...  

The electric vehicle (EV) is one of the most important and common parts of modern life. Recently, EVs have undergone a big development thanks to the advantages of high efficiency, negligible pollution, low maintenance, and low noise. Charging stations are very important and mandatory services for electric vehicles. Nevertheless, they cause high stress on the electric utility grid. Therefore, renewable energy-sourced charging stations have been introduced. They improve the environmental issues of the electric vehicles and support remote area operation. This paper proposes the application of fuzzy control to an isolated charging station supplied by photovoltaic power. The system is modeled and simulated using Matlab/Simulink. The simulation results indicate that the disturbances in the solar insolation do not affect the electric vehicle charging process at all. Moreover, the controller perfectly manages the stored energy to compensate for the solar energy variations. Additionally, the system response with the fuzzy controller is compared to that with the PI controller. The comparison shows that the fuzzy controller provides an improved response.


Author(s):  
Azhar Ul-Haq ◽  
Marium Azhar

This chapter presents a detailed study of renewable energy integrated charging infrastructure for electric vehicles (EVs) and discusses its various aspects such as siting requirements, standards of charging stations, integration of renewable energy sources for powering up charging stations and interfacing devices between charging facilities and smart grid. A smart charging station for EVs is explained along with its essential components and different charging methodologies are explained. It has been recognized that the amalgamation of electric vehicles in the transportation sector will trigger power issues due to the mobility of vehicles beyond the stretch of home area network. In this regard an information and communication technology (ICT) based architecture may support EVs management with an aim to enhance the electric vehicle charging and energy storage capabilities with the relevant considerations. An ICT based solution is capable of monitoring the state of charge (SOC) of EV batteries, health and accessible amount of energy along with the mobility of EVs.


2019 ◽  
Vol 10 (1) ◽  
pp. 14 ◽  
Author(s):  
Marte K. Gerritsma ◽  
Tarek A. AlSkaif ◽  
Henk A. Fidder ◽  
Wilfried G.J.H.M. van Sark

This paper proposes a method for analyzing and simulating the time-dependent flexibility of electric vehicle (EV) demand. This flexibility is influenced by charging power, which depends on the charging stations, the EV characteristics, and several environmental factors. Detailed charging station data from a Dutch case study have been analysed and used as input for a simulation. In the simulation, the interdependencies between plug-in time, connection duration, and required energy are respected. The data analysis of measured data reveals that 59% of the aggregated EV demand can be delayed for more than 8 h, and 16% for even more than 24 h. The evening peak shows high flexibility, confirming the feasibility of congestion management using smart charging within flexibility constraints. The results from the simulation show that the average daily EV demand increases by a factor 21 between the ‘Present-day’ and the ‘High’ scenario, while the maximum EV demand peak increases only by a factor 6, as a result of the limited simultaneity of the transactions. Further, simulations using the average charging power of individual measured transactions yield more accurate results than simulations using a fixed value for charging power. The proposed method for simulating future EV flexibility provides a basis for testing different smart charging algorithms.


2013 ◽  
Vol 389 ◽  
pp. 1014-1018 ◽  
Author(s):  
Lei Tao ◽  
Xing Tong ◽  
Xin He ◽  
Hui Xu ◽  
Zhong Fu Tan

Whether charging the electric vehicle is convenient has an important impact on the promotion of electric vehicles, the construction of charging stations should minimize the total cost of charging the electric vehicles. In order to select the optimal building addresses of charging stations, this paper proposed a site selection method based on the Floyd shortest path algorithm. This method uses the analysis of the shortest charging path between the electric car rallying points by shortest path method, and combines the assumption of charging cost and the number of charging stations in order to minimize the total charging distance in the region. Through the example analysis, this method can select one or more optimal construction sites of charging stations in the regional networks quickly and conveniently, so that the minimum total charging distance can be got and the optimal economic benefits can be achieved, too.


Sign in / Sign up

Export Citation Format

Share Document