Performance of Reduced Order Models of Moving Heat Source Deposition Problems for Efficient Inverse Analysis

2014 ◽  
Author(s):  
John G. Michopoulos ◽  
Brian Dennis ◽  
Foteini Komninelli ◽  
Athanasios Iliopoulos ◽  
Ashkan Akbariyeh
Keyword(s):  
Heat Source ◽  
Inverse Analysis ◽  
Galerkin Projection ◽  
Reduced Order Models ◽  
Moving Heat Source ◽  
Reduced Order ◽  
Computational Implementation ◽  
Model Size ◽  
Transfer Problems ◽  
Proper Orthogonal

In order to reduce the demanding computational requirements for the numerical solution of problems involving heat transfer problems of moving heat source deposition, we present an approach utilizing reduced order models based on proper orthogonal decomposition and associated Galerkin projection. We subsequently describe the finite element implementation of solution methodology for both the full order and the reduced order models, as well as the respective computational implementation details. Using this methodology, we performed a sensitivity analysis for a problem of a moving heat source to investigate the performance characteristics of the relevant reduced order model size and present the efficiency of the approach. We demonstrated the efficiency of the reduced models for performing inverse analysis.

scholarly journals GENETIC ALGORITHM-BASED CALIBRATION OF REDUCED ORDER GALERKIN MODELS

2011 ◽  
Vol 16 (1) ◽  
pp. 233-247 ◽  
Author(s):  
Witold Stankiewicz ◽  
Robert Roszaka ◽  
Marek Morzyńskia
Keyword(s):  
Genetic Algorithm ◽  
Bluff Body ◽  
Calibration Procedure ◽  
Galerkin Projection ◽  
Reduced Order Models ◽  
Data Set ◽  
Reduced Order ◽  
Low Dimensional ◽  
Fluid Behaviour ◽  
Proper Orthogonal

Low-dimensional models, allowing quick prediction of fluid behaviour, are key enablers of closed-loop flow control. Reduction of the model's dimension and inconsistency of high-fidelity data set and the reduced-order formulation lead to the decrease of accuracy. The quality of Reduced-Order Models might be improved by a calibration procedure. It leads to global optimization problem which consist in minimizing objective function like the prediction error of the model. In this paper, Reduced-Order Models of an incompressible flow around a bluff body are constructed, basing on Galerkin Projection of governing equations onto a space spanned by the most dominant eigenmodes of the Proper Orthogonal Decomposition (POD). Calibration of such models is done by adding to Galerkin System some linear and quadratic terms, which coefficients are estimated using Genetic Algorithm.

scholarly journals Reduced Order Models for Nonlinear Dynamic Analysis With Application to a Fan Blade

2019 ◽  
Author(s):  
Mikel Balmaseda ◽  
G. Jacquet-Richardet ◽  
A. Placzek ◽  
D.-M. Tran
Keyword(s):  
Normal Modes ◽  
Nonlinear Dynamic Analysis ◽  
Evaluation Procedure ◽  
Reduced Order Models ◽  
Reduced Basis ◽  
Reduced Order ◽  
Stiffness Evaluation ◽  
Fan Blade ◽  
Proper Orthogonal ◽  
Good Agreement

Abstract In the present work reduced order models (ROM) that are independent from the full order finite element models (FOM) considering geometrical non linearities are developed and applied to the dynamic study of a fan. The structure is considered to present nonlinear vibrations around the pre-stressed equilibrium induced by rotation enhancing the classical linearised approach. The reduced nonlinear forces are represented by a polynomial expansion obtained by the Stiffness Evaluation Procedure (STEP) and then corrected by means of a Proper Orthogonal Decomposition (POD) that filters the full order nonlinear forces (StepC ROM). The Linear Normal Modes (LNM) and Craig-Bampton (C-B) type reduced basis are considered here. The latter are parametrised with respect to the rotating velocity. The periodic solutions obtained with the StepC ROM are in good agreement with the solutions of the FOM and are more accurate than the linearised ROM solutions and the STEP ROM. The proposed StepC ROM provides the best compromise between accuracy and time consumption of the ROM.

Comparison of two model reduction approaches of an industrial drying process

2021 ◽  
Vol 69 (8) ◽  
pp. 667-682
Author(s):  
Marc Oliver Berner ◽  
Martin Mönnigmann
Keyword(s):  
Dynamic Models ◽  
Orthogonal Decomposition ◽  
Wood Chips ◽  
Residual Water ◽  
Balanced Truncation ◽  
Reduced Order Models ◽  
Drying Process ◽  
Reduced Order ◽  
Proper Orthogonal ◽  
Many Particles

Abstract Dynamic models have proven to be helpful for determining the residual water content in combustible biomass. However, these models often require partial differential equations, which render simulations impracticable when several thousand particles need to be considered, such as in the drying of wood chips. Reduced-order models help to overcome this problem. We compare proper orthogonal decomposition (POD) based to balanced truncation based reduced-order models. Both reduced models are lean enough for an application to systems with many particles, but the model based on balanced truncation shows more accurate results.

scholarly journals Constrained reduced-order models based on proper orthogonal decomposition

2017 ◽  
Vol 321 ◽  
pp. 18-34 ◽  
Author(s):  
Sohail R. Reddy ◽  
Brian A. Freno ◽  
Paul G.A. Cizmas ◽  
Seckin Gokaltun ◽  
Dwayne McDaniel ◽  
...  
Keyword(s):  
Proper Orthogonal Decomposition ◽  
Orthogonal Decomposition ◽  
Reduced Order Models ◽  
Reduced Order ◽  
Proper Orthogonal

Anisothermal Flow Control by Using Reduced-Order Models

2012 ◽  
Author(s):  
Alexandra Tallet ◽  
Cédric Leblond ◽  
Cyrille Allery
Keyword(s):  
Fluid Flow ◽  
Flow Control ◽  
Projection Method ◽  
Control Strategies ◽  
Pollutant Concentration ◽  
Galerkin Projection ◽  
Reduced Order Models ◽  
Reduced Order ◽  
Optimal Projection ◽  
Fluid Flow Control

Despite constantly improving computer capabilities, classical numerical methods (DNS, LES,…) are still out of reach in fluid flow control strategies. To make this problem tractable almost in real-time, reduced-order models are used here. The spatial basis is obtained by POD (Proper Orthogonal Decomposition), which is the most commonly used technique in fluid mechanics. The advantage of the POD basis is its energetic optimality: few modes contain almost the totality of energy. The ROM is achieved with the recent developed optimal projection [1], unlike classical methods which use Galerkin projection. This projection method is based on the minimization of the residual equations in order to have a stabilizing effect. It enables moreover to access pressure field. Here, the projection method is slightly different from [1]: a formulation without the Poisson equation is proposed and developed. Then, the ROM obtained by optimal projection is introduced within an optimal control loop. The flow control strategy is illustrated on an isothermal square lid-driven cavity and an anisothermal square ventilated cavity. The aim is to reach a target temperature (or target pollutant concentration) in the cavity, with an interior initial temperature (or initial pollutant concentration), by adjusting the inlet fluid flow rate.

scholarly journals Construction of reduced-order models for fluid flows using deep feedforward neural networks

2019 ◽  
Vol 872 ◽  
pp. 963-994 ◽  
Author(s):  
Hugo F. S. Lui ◽  
William R. Wolf
Keyword(s):  
Proper Orthogonal Decomposition ◽  
Fluid Flows ◽  
Leading Edge ◽  
Feedforward Neural Networks ◽  
Orthogonal Decomposition ◽  
Reduced Order Models ◽  
Order Model ◽  
Sparse Regression ◽  
Reduced Order ◽  
Proper Orthogonal

We present a numerical methodology for construction of reduced-order models (ROMs) of fluid flows through the combination of flow modal decomposition and regression analysis. Spectral proper orthogonal decomposition is applied to reduce the dimensionality of the model and, at the same time, filter the proper orthogonal decomposition temporal modes. The regression step is performed by a deep feedforward neural network (DNN), and the current framework is implemented in a context similar to the sparse identification of nonlinear dynamics algorithm. A discussion on the optimization of the DNN hyperparameters is provided for obtaining the best ROMs and an assessment of these models is presented for a canonical nonlinear oscillator and the compressible flow past a cylinder. Then the method is tested on the reconstruction of a turbulent flow computed by a large eddy simulation of a plunging airfoil under dynamic stall. The reduced-order model is able to capture the dynamics of the leading edge stall vortex and the subsequent trailing edge vortex. For the cases analysed, the numerical framework allows the prediction of the flow field beyond the training window using larger time increments than those employed by the full-order model. We also demonstrate the robustness of the current ROMs constructed via DNNs through a comparison with sparse regression. The DNN approach is able to learn transient features of the flow and presents more accurate and stable long-term predictions compared to sparse regression.

scholarly journals NEW REGULARIZATION METHOD FOR CALIBRATED POD REDUCED-ORDER MODELS

2016 ◽  
Vol 21 (1) ◽  
pp. 47-62 ◽  
Author(s):  
Badr Abou El Majd ◽  
Laurent Cordier
Keyword(s):  
Regularization Method ◽  
Regularization Parameter ◽  
Weighted Average ◽  
Calibration Method ◽  
Wake Flow ◽  
Galerkin Projection ◽  
Reduced Order Models ◽  
Reduced Order ◽  
Normalized Error ◽  
Curve Method

Reduced-order models based on Proper orthogonal decomposition are known to suffer from a lack of accuracy due to the truncation effect introduced by keeping only the most energetic modes. In this paper, we propose a new regularized calibration method aiming at minimizing a weighted average of normalized error, and a term measuring the change of the coefficients from their value obtained by Galerkin projection. We also determine the optimal value of the regularization parameter by analogy of the L-curve method. This paper is a sequel of [8] in which we compared various methods of calibration and introduced a Tikhonov-based regularization method. The proposed approach is assessed for a two dimensional wake flow around a cylinder, characteristic of the configurations of interest.

Sign in / Sign up

Export Citation Format

Share Document