One Novel Isoconstrained Parallel Robot With Schoenflies-Motion

2013 ◽  
Author(s):  
Po-Chih Lee
Keyword(s):  
Parallel Mechanism ◽  
Jacobian Matrix ◽  
Parallel Robot ◽  
Singularity Analysis ◽  
Point Of View ◽  
Universal Joint ◽  
Small Motion ◽  
Robot Architecture ◽  
Pick And Place ◽  
Pick And Place Operation

The coupling between two opposite bars of the hinged parallelogram produces relative 1-DoF circular translation and the opposite bars can move but remain parallel. From the point of view of kinematics, a hinged parallelogram is equivalent to a prismatic pair for a small motion. On the basis of a special parallel mechanism with the limb architecture of type CPUh (C and P denote cylindrical and prismatic pairs; Uh indicates the pseudo-universal-joint having one revolute and one screw pairs with the intersecting axes), we provide one novel Schoenflies-motion isoconstrained CPaUh//CPaUh robot with only two limbs having the hinged parallelograms for the fast pick-and-place operation of the assembly and packaging applications. This type of robot is compact for not only its structure but also its actuation. The robot architecture and kinematics including inverse and forward solutions are studied. In addition, Jacobian matrix, singularity analysis and workspace are further discussed. It is hoped that the evaluations of such two-limb parallel mechanism can be useful for possible application in industry where pick-and-place motion and higher accuracy are required.

scholarly journals Type synthesis and kinematics analysis of a family of three translational and one rotational pick-and-place parallel mechanisms with high rotational capability

2019 ◽  
Vol 11 (6) ◽  
pp. 168781401985307
Author(s):  
Xing Zhang ◽  
Dejun Mu ◽  
Yuze Liu ◽  
Jie Bi ◽  
Hongrui Wang
Keyword(s):  
Parallel Mechanism ◽  
Jacobian Matrix ◽  
Hessian Matrix ◽  
Parallel Mechanisms ◽  
Kinematics Analysis ◽  
Type Synthesis ◽  
Lie Group Theory ◽  
Revolute Joints ◽  
Pick And Place ◽  
Pick And Place Operation

This article proposes a family of spatial three translational and one rotational parallel mechanisms (PMs) for pick-and-place operation. Their features are one independent rotation of the mechanism with four identical limbs, which are provided by the four revolute joints on the moving platform. The rotational capability of the PMs has a range of at least 180°. This article focuses on the synthesis of the PMs and kinematics analysis of the 4- P(2-SS)R parallel mechanism. First, based on the Lie group theory, three parallelograms are used in designing the PMs. The limbs are listed and two types of three translational and one rotational PMs are synthesized. Then, a typical 4- P(2-SS)R PM is selected, the 6 × 6 Jacobian matrix and the 6 × 6 × 6 Hessian matrix of the mechanism are derived for solving the displacement, velocity, and acceleration of the mechanism. Finally, singularity configurations are disclosed from the 6 × 6 Jacobian matrix, and the workspace of the mechanism is provided to illustrate the high rotational capability.

scholarly journals Optimum Seeking of Redundant Actuators for M-RCM 3-UPU Parallel Mechanism

2020 ◽  
Author(s):  
Chen Zhao ◽  
Jingke Song ◽  
Xuechan Chen ◽  
Ziming Chen ◽  
Huafeng Ding
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Singularity Analysis ◽  
Universal Joint ◽  
Prismatic Joint ◽  
Transmission Index ◽  
Redundant Actuators ◽  
Force Transmissibility ◽  
Singular Configuration

Abstract This paper focuses on a 2R1T 3-UPU (U for universal joint and P for prismatic joint) parallel mechanism (PM) with two rotational and one translational (2R1T) degrees of freedom (DOFs) and the ability of multiple remote centers of motion (M-RCM). The singularity analysis based on the indexes of motion/force transmissibility and constraint shows that this PM has transmission singularity, constraint singularity, mixed singularity and limb singularity. To solve these singularproblems, the quantifiable redundancy transmission index (RTI) and the redundancy constraint index (RCI) are proposed for optimum seeking of redundant actuators for this PM. Then the appropriate redundant actuators are selected and the working scheme for redundant actuators near the corresponding singular configuration are given to help the PM go through the singularity.

Delta Parallel Robot Based on Crank-Slider Mechanism

2017 ◽  
Vol 6 (2) ◽  
pp. 112
Author(s):  
Zhe Qin ◽  
Xiao-Chu Liu ◽  
Zhuan Zhao
Keyword(s):  
Parallel Robot ◽  
Force Transmission ◽  
Practical Application ◽  
Cartesian Space ◽  
Output Torque ◽  
Performance Indexes ◽  
Pick And Place ◽  
Delta Robot ◽  
Three Degree Of Freedom ◽  
Pick And Place Operation

A three-degree-of-freedom Delta parallel manipulator driven by a crank-slider mechanism is proposed. In Cartesian space, a gate-shaped curve is taken as the path of the pick-and-place operation, combining with the inverse kinematics theory of the Delta robot, and a mathematical model of robot statia force transmission is established. The force and the output torque of the robot-driven joint are taken as the main performance indexes, and the value of the crank-slider mechanism applied to Delta robot is further measured. The simulation results show that the delta robot driven by the crank slider mechanism can reduce the force and output torque of the driving joint during the picking and discharging operation, and has good practical application value.

Novel Design and Analysis of a Fully Decoupled 3-DOF Spherical Parallel Robot

2009 ◽  
Author(s):  
Dan Zhang ◽  
Fan Zhang
Keyword(s):  
Physical Meaning ◽  
Parallel Mechanism ◽  
Jacobian Matrix ◽  
Parallel Robot ◽  
Degree Of Freedom ◽  
Redundant Constraints ◽  
Rotational Motions ◽  
Three Degree Of Freedom ◽  
Novel Design

In this paper, we propose a unique, decoupled Three Degree-of-Freedom (DOF) parallel wrist. The condition required for synthesizing a fully isotropic parallel mechanism is obtained based on the physical meaning of the row vector in the Jacobian Matrix. Specifically, an over-constrained spherical 3-DOF parallel mechanism is presented and the modified structure, which avoids the redundant constraints, is also introduced. The proposed manipulator is capable of decoupled rotational motions around the x, y and z axes and contains an output angle that is equal to the input angle. Since this device is analyzed with the Jacobian Matrix, which is constant, the mechanism is free of singularity and maintains homogenous stiffness over the entire workspace.

Kinematics and Stiffness Modeling of a 4-DOF Parallel Robot for Schönflies Motion Generation

2014 ◽  
Author(s):  
Shaoping Bai ◽  
Lasse Køgs Andersen ◽  
Carsten Rebbe Mølgaard
Keyword(s):  
Dynamic Performance ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Motion Generation ◽  
Stiffness Modeling ◽  
Pick And Place ◽  
Fea Simulation ◽  
Schönflies Motion ◽  
Pick And Place Operation ◽  
Good Agreement

This work deals with the design of parallel robots for the generation of pick-and-place operation, or Schönflies motion. The aim is to develop a robot with workspace optimized for fast pick-and-place operations, namely, a robot with a superellipsoidal reachable volume, which suits best for the pick-and-place operations on conveyers, where robots’ working areas are nearly rectangular. In this paper, the kinematics and stiffness modeling of the new robot are presented. A method of stiffness modeling by means of Castigliano’s Theorem is developed. Using the new method, the stiffness of the robot is analyzed. The results are compared with FEA simulation, which shows a good agreement between the results. The method is finally applied to the engineering design of the new robot for enhanced static and dynamic performance.

Singularity Analysis of a Novel 4-DOFs Parallel Robot H4 by Using Screw Theory

2003 ◽  
Author(s):  
Hee-Byoung Choi ◽  
Atsushi Konno ◽  
Masaru Uchiyama
Keyword(s):  
Closed Loop ◽  
Jacobian Matrix ◽  
Screw Theory ◽  
Parallel Robot ◽  
Singularity Analysis ◽  
Loop Structure ◽  
Singular Configurations ◽  
Planning And Control ◽  
Kinematic Singularities ◽  
And Control

The closed-loop structure of a parallel robot results in complex kinematic singularities in the workspace. Singularity analysis become important in design, motion, planning, and control of parallel robot. The traditional method to determine a singular configurations is to find the determinant of the Jacobian matrix. However, the Jacobian matrix of a parallel manipulator is complex in general, and thus it is not easy to find the determinant of the Jacobian matrix. In this paper, we focus on the singularity analysis of a novel 4-DOFs parallel robot H4 based on screw theory. Two types singularities, i.e., the forward and inverse singularities, have been identified.

Singularity Analysis of a Plane-Symmetry 3-RPS Parallel Robot Based on Translational/Rotational Jacobian Matrices

2011 ◽  
Vol 121-126 ◽  
pp. 1590-1594
Author(s):  
Yan Shi ◽  
Hong Xin Yue ◽  
Yi Lu ◽  
Lian He Guo
Keyword(s):  
Jacobian Matrix ◽  
Parallel Robot ◽  
Singularity Analysis ◽  
Parallel Robots ◽  
New Method ◽  
Plane Symmetry ◽  
Jacobian Matrices ◽  
Different Types

Firstly, 3-DOF parallel robots were classified into different types from the view of moving form. A new method of analyzing the singularity of 3-DOF parallel robots was introduced, which is based on translational Jacobian matrix and rotational Jacobian matrix. The singularity of parallel robots with pure translational form and pure rotational form was introduced summarily. Secondly, the process of solving the plane-symmetry 3-RPS parallel robot with combined moving forms was focused on, through which translational Jacobian matrix and rotational Jacobian matrix were adopted. Finally, the solving results were compared with the axis-symmetry 3-RPS parallel robot, which showed more general singularity can be solved through the new method.

scholarly journals Design and Analysis of a Novel Schönflies Motion Parallel Robot with Full Cycle Rotation

2021 ◽  
Author(s):  
Luquan Li ◽  
Yuefa Fang ◽  
Lin Wang ◽  
Jiaqiang Yao
Keyword(s):  
Complex Dynamics ◽  
Virtual Work ◽  
Parallel Robot ◽  
Singularity Analysis ◽  
Parallel Robots ◽  
The Novel ◽  
Scara Robot ◽  
Pick And Place ◽  
Place Task ◽  
Schönflies Motion

Abstract Due to the complex structures of multi-limbed parallel robots, conventional parallel robots generally have limited workspace, complex kinematics, and complex dynamics, which increases the application difficulty of parallel robot in industrial engineering. To solve the above problems, this paper proposes a single-loop Schönflies motion parallel robot with full cycle rotation, the robot can generate Schönflies motion by the most simplified structure. The novel Schönflies motion parallel robot is a two-limb parallel mechanism with least links and joints, and each limb is driven by a 2-degree of freedom (DOF) cylindrical driver (C-driver). The full cycle rotation of the output link is achieved by “…R-H…” structure, where the revolute (R) and helical (H) joints are coaxial. Mobility, kinematics, workspace and singularity analysis of novel Schönflies motion parallel robot are analyzed. Then, dynamic model is formulated based on the principle of virtual work. Moreover, a pick-and-place task is implemented by proposed Schönflies motion parallel robot and a serial SCARA robot, respectively. The simulation results verify the correctness of the theoretical model. Furthermore, dynamics performances of Schönflies motion parallel robot and serial SCARA robot are compared, which reveal the performance merits of proposed Schönflies motion parallel robot.

Kinematics and Singularity Analysis of the Hexaglide Parallel Robot

2008 ◽  
Author(s):  
Mansour Abtahi ◽  
Hodjat Pendar ◽  
Aria Alasty ◽  
Gholamreza Vossoughi
Keyword(s):  
Machine Tools ◽  
Parallel Manipulator ◽  
High Speed ◽  
Jacobian Matrix ◽  
Parallel Manipulators ◽  
Parallel Robot ◽  
Singularity Analysis ◽  
The Past ◽  
Different Types ◽  
Forward Kinematic

In the past few years, parallel manipulators have become increasingly popular in industry, especially, in the field of machine tools. Hexaglide is a 6 DOF parallel manipulator that can be used as a high speed milling machine. In this paper, the kinematics and singularity of Hexaglide parallel manipulator are studied systematically. At first, this robot has been modeled and its inverse and forward kinematic problems have been solved. Then, formulas for solving inverse velocity are derived and Jacobian matrix is obtained. After that, three different types of singularity for this type of robot have been investigated. Finally a numerical example is presented.

Controllable Rotation Workspace of a Metamorphic Parallel Mechanism With Reconfigurable Universal Joints

2013 ◽  
Author(s):  
Dongming Gan ◽  
Jian S. Dai ◽  
Jorge Dias ◽  
Lakmal D. Seneviratne
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Jacobian Matrix ◽  
Central Line ◽  
Singularity Analysis ◽  
Euler Angles ◽  
Base Plane ◽  
Constraint Forces ◽  
Joint Rotation ◽  
Universal Joints

This paper introduces a metamorphic parallel mechanism which has three topologies with pure translational, pure rotational and 3T1R degrees of freedom. Mobility change stemming from the reconfigurability of a reconfigurable Hooke (rT) joint is illustrated by change of the limb twist screw systems and the platform constraint screw system. Then the paper focuses on the pure rotational topology of the mechanism of which the rotational center can be altered along the central line perpendicular to the base plane by altering the radial rotational axes in the limbs. Singularity analysis is conducted based on the dependency of constraint forces and actuation forces in a screw based Jacobian matrix. Following these, rotation workspace variation is demonstrated in a 2D projection format using the Tilt-and-Torsion Euler angles based on the actuation limits and joint rotation ranges.

Sign in / Sign up

Export Citation Format

Share Document