A Framework for the Integration of System Engineering and Functional Analysis Techniques to the Goal and Scope of Life Cycle Assessment

2012 ◽  
Author(s):  
Marcos Esterman ◽  
Maria E. Fumagalli ◽  
Brian Thorn ◽  
Callie Babbitt
Keyword(s):  
Functional Analysis ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Functional Unit ◽  
System Engineering ◽  
Identification System ◽  
Boundary Definition ◽  
Definition Of ◽  
The Impact ◽  
Goal And Scope

With the increased concern over the impact that product and processes have on the environment several tools for environmental impact assessment have been developed. Life Cycle Assessment (LCA) is perhaps the most broadly known and used. The use of LCA is common in industry and there is a growing interest to improve the approach since several unresolved problems have been identified with its use. One important issue to resolve is the proper definition of the functional unit. The stated primary goal of the functional unit in LCA is to ensure comparability of LCA results; however, when reviewing the literature, LCA practitioners remark that comparing LCA studies is a very difficult task. The attributed reasons for this problem are the lack of standardized assumptions and practices, including the definition of the functional unit. Even though several unresolved problems present in LCA have had solutions proposed, a clear and actionable solution to the specific problem of functional unit definition is still not available. This paper will introduce system engineering and functional analysis concepts to the goal and scope definition phase of LCA in order to provide a framework for system definition, system boundary definition, and reference flows identification. System engineering principles and functional analysis have been extensively used to aid the design process, yet these approaches have not been effectively applied to the LCA domain. The benefits associated with the proposed framework include improved comparability of LCAs, dynamic updating of LCAs, and the integration of LCA into early stage product development.

scholarly journals Assessment of Environmental Impact of the Gayo Arabica Coffee Production by Wet Process using Life Cycle Assessment

2019 ◽  
Vol 23 (1) ◽  
pp. 27-34
Author(s):  
Ikhsan Diyarma ◽  
Tajuddin Bantacut ◽  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Liquid Waste ◽  
Inventory Analysis ◽  
Coffee Production ◽  
Arabica Coffee ◽  
Global Warming Impact ◽  
Wet Process ◽  
The Impact ◽  
Goal And Scope

Abstract Increasement of demand for gayo arabica coffee has influenced the coffee industry, either in increasing the coffee production and also in increasing the usage of coffee machinery and equipment significantly. However, combustion of oil fuels result the emissions of carbon dioxide (CO2), methane (CH4) and nitrous oxide (N2O) which increase the effect of greenhouse gases from the coffee production process. This study aimed to analyze the direct impact of gayo coffee production towards environment using the Life Cycle Assessment (LCA) method, including several stages such as (1) the goal and scope definition, (2) the inventory analysis, (3) the impact assessment, and (4) the interpretation. Results of this study showed that the energy needed to process 1000 kg of coffee was 7.67 MJ, while the produced liquid waste was 5 953.2 kg. The value of the global warming impact on the coffee life cycle was 56 807 165.63 CO2eq.

scholarly journals Functional Unit for Impact Assessment in the Mining Sector—Part 1

2020 ◽  
Vol 12 (22) ◽  
pp. 9313
Author(s):  
Julien Bongono ◽  
Birol Elevli ◽  
Bertrand Laratte
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Functional Unit ◽  
Multiscale Approach ◽  
Mining Sector ◽  
End Use ◽  
Definition Of ◽  
Sector Part ◽  
Selection Of

More and more efforts are directed towards the standardization of the methods of determining the functional unit (FU) in a Life Cycle Assessment (LCA). These efforts concern the development of theories and detailed methodological guides, but also the evaluation of the quality of the FU obtained. The objective of this article is to review this work in order to propose, using a multiscale approach, a method for defining the FU in the mining sector, which takes into account all the dimensions of the system under study. In this first part, the emphasis is on identifying the shortcomings of the FU. The absence of a precise normative framework specific to each sector of activity, as well as the complex, multifunctional and hard-to-scale nature of the systems concerned, are at the origin of the flexibility in the selection of the FU. This lack of a framework, beyond generating a heterogeneous definition of the FU for the same system, most often leads to an incomplete formulation of this sensitive concept of LCA. It has been found that key parameters such as the end-use of a product or process, as well as the interests of stakeholders, are hardly taken into account in the specification of the FU.

scholarly journals Study of Life Cycle Assessment of Bricks and the Impacts to the Environment in Malaysia

2021 ◽  
Vol 1200 (1) ◽  
pp. 012012
Author(s):  
H Adnan ◽  
A T Balasbaneh
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Negative Impact ◽  
Fine Particulate Matter ◽  
Construction Materials ◽  
Resource Scarcity ◽  
Clay Brick ◽  
The Impact ◽  
Freshwater Eutrophication ◽  
Goal And Scope

Abstract Life cycle assessment (LCA) is conducted in order to evaluate the environmental impacts of products chosen from the manufacturing phase and the end-of life cycle of the material and in clay brick and concrete were chose as the observed products. Brick is one of the important construction materials that can be seen at the surrounding. Main objective for this study is to investigate the impact of production of different types of brick to the level of emissions of carbon dioxide to the environment. Four stages of life cycle assessment were conducted before the result for the study analysis can be obtained and that stages including goal and scope definition, life cycle inventory (LCI), life cycle impact assessment (LCIA) and the interpretation part. The results obtained from the simulation of the Simapro shown that the concrete contributes more negative impact compared production of clay brick in terms of global warming, ozone depletion, formation of fine particulate matter and ozone formation. Manufacture of clay brick contributes more negative impact to the ionizing radiation, freshwater eutrophication and mineral resource scarcity.

scholarly journals Life cycle assessment of fermented milk: yogurt production

2020 ◽  
Vol 31 (1) ◽  
pp. 49-54
Author(s):  
Cristina Ghinea ◽  
Ana Leahu
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Solid Waste ◽  
Functional Unit ◽  
Raw Materials ◽  
Fermented Milk ◽  
Milk Product ◽  
Acidification Potential ◽  
The Impact ◽  
Fermented Milk Product

AbstractYogurt is a fermented milk product, resulted through milk acidification by lactic acid bacteria, highly appreciated worldwide. In this study, life cycle assessment (LCA) methodology was applied for modelling of environmental impacts associated with yogurt production. The system boundaries include the following activities: milk processing, transport, solid waste and wastewater treatments. Functional unit set for this study is 1 kg of produced yogurt. The input and output data were collected from various sources like reports, databases, legislation. All these data were used further in the impact assessment stage performed with GaBi software which includes LCA methods like CML2001 - Jan. 2016, ReCiPe 1.08, UBP 2013, EDIP 2003 and others. Results showed that the global warming potential (GWP) determined for yogurt was 2.92 kg CO2 eq. per kg of yogurt, while acidification potential (AP) was approximately 0.014 kg SO2 eq. per kg of yogurt. It was observed that the main contributor to all impact categories is consumption of electricity during the yogurt production, mainly in the pasteurization, evaporation and cooling stages. 61.4% of the emissions resulted from transportation of raw materials contributes to GWP, while 38.3% to photochemical ozone creation potential (POCP). Emissions from wastewater treatment are contributing especially to the eutrophication potential (EP), while emission from solid waste landfilling are contributing mainly to POCP.

A taxonomy for Whole Building Life Cycle Assessment (WBLCA)

2019 ◽  
Vol 8 (3) ◽  
pp. 190-205
Author(s):  
Barbara X. Rodriguez ◽  
Kathrina Simonen ◽  
Monica Huang ◽  
Catherine De Wolf
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Green Building ◽  
Rating Systems ◽  
Content Type ◽  
Definition Of ◽  
Building Life Cycle ◽  
Global Carbon ◽  
Practical Implications ◽  
Goal And Scope

Purpose The purpose of this paper is to present an analysis of common parameters in existing tools that provide guidance to carry out Whole Building Life Cycle Assessment (WBLCA) and proposes a new taxonomy, a catalogue of parameters, for the definition of the goal and scope (G&S) in WBLCA. Design/methodology/approach A content analysis approach is used to identify, code and analyze parameters in existing WBLCA tools. Finally, a catalogue of parameters is organized into a new taxonomy. Findings In total, 650 distinct parameter names related to the definition of G&S from 16 WBLCAs tools available in North America, Europe and Australia are identified. Building on the analysis of existing taxonomies, a new taxonomy of 54 parameters is proposed in order to describe the G&S of WBLCA. Research limitations/implications The analysis of parameters in WBLCA tools does not include Green Building Rating Systems and is only limited to tools available in English. Practical implications This research is crucial in life cycle assessment (LCA) method harmonization and to serve as a stepping stone to the identification and categorization of parameters that could contribute to WBLCA comparison necessary to meet current global carbon goals. Social implications The proposed taxonomy enables architecture, engineering and construction practitioners to contribute to current WBLCA practice. Originality/value A study of common parameters in existing tools contributes to identifying the type of data that is required to describe buildings and contribute to build a standardized framework for LCA reporting, which would facilitate consistency across future studies and can serve as a checklist for practitioners when conducting the G&S stage of WBLCA.

scholarly journals Life Cycle Assessment for the Production Phase of Nano-Silica-Modified Asphalt Mixtures

2019 ◽  
Vol 9 (7) ◽  
pp. 1315 ◽  
Author(s):  
Solomon Sackey ◽  
Dong-Eun Lee ◽  
Byung-Soo Kim
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Functional Unit ◽  
Asphalt Mixture ◽  
Impact Category ◽  
Asphalt Mixtures ◽  
Nano Silica ◽  
Relative Significance ◽  
Modified Asphalt ◽  
The Impact

To combat the rutting effect and other distresses in asphalt concrete pavement, certain modifiers and additives have been developed to modify the asphalt mixture to improve its performance. Although few additives exist, nanomaterials have recently attracted significant attention from the pavement industry. Several experimental studies have shown that the use of nanomaterials to modify asphalt binder results in an improved oxidative aging property, increased resistance to the rutting effect, and improves the rheological properties of the asphalt mixture. However, despite the numerous benefits of using nanomaterials in asphalt binders and materials, there are various uncertainties regarding the environmental impacts of nano-modified asphalt mixtures (NMAM). Therefore, this study assessed a Nano-Silica-Modified Asphalt Mixtures in terms of materials production emissions through the Life Cycle Assessment methodology (LCA), and the results were compared to a conventional asphalt mixture to understand the impact contribution of nano-silica in asphalt mixtures. To be able to compare the relative significance of each impact category, the normalized score for each impact category was calculated using the impact scores and the normalization factors. The results showed that NMAM had a global warming potential of 7.44563 × 103 kg CO2-Eq per functional unit (FU) compared to 7.41900 × 103 kg CO2-Eq per functional unit of the conventional asphalt mixture. The application of LCA to NMAM has the potential to guide decision-makers on the selection of pavement modification additives to realize the benefits of using nanomaterials in pavements while avoiding potential environmental risks.

scholarly journals 2-Piece Cork Stoppers as Alternative for Valorization of Thin Cork Planks: Analysis by LCA Methodology

Foods ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 873
Author(s):  
Francisco Javier Flor-Montalvo ◽  
Agustín Sánchez-Toledo Ledesma ◽  
Eduardo Martínez Cámara ◽  
Emilio Jiménez-Macías ◽  
Jorge Luis García-Alcaraz ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Raw Materials ◽  
Lca Methodology ◽  
Significant Difference ◽  
Different Dimensions ◽  
The Impact ◽  
Different Thickness ◽  
Cork Stoppers ◽  
Wine Bottle

Natural stoppers are a magnificent closure for the production of aging wines and unique wines, whose application is limited by the availability of raw materials and more specifically of cork sheets of different thickness and quality. The growing demand for quality wine bottle closures leads to the search for alternative stopper production. The two-piece stopper is an alternative since it uses non-usable plates in a conventional way for the production of quality caps. The present study has analyzed the impact of the manufacture of these two-piece stoppers using different methodologies and for different dimensions by developing an LCA (Life Cycle Assessment), concluding that the process phases of the plate, its boiling, and its stabilization, are the phases with the greatest impact. Likewise, it is detected that the impacts in all phases are relatively similar (for one kg of net cork produced), although the volumetric difference between these stoppers represents a significant difference in impacts for each unit produced.

scholarly journals Case study of a water bioengineering construction site in Austria. Ecological aspects and application of an environmental life cycle assessment model

2021 ◽  
Author(s):  
M. von der Thannen ◽  
S. Hoerbinger ◽  
C. Muellebner ◽  
H. Biber ◽  
H. P. Rauch
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Energy Demand ◽  
Assessment Model ◽  
Construction Site ◽  
Negative Effects ◽  
Environmental Life Cycle Assessment ◽  
The Impact ◽  
Soil And Water

AbstractRecently, applications of soil and water bioengineering constructions using living plants and supplementary materials have become increasingly popular. Besides technical effects, soil and water bioengineering has the advantage of additionally taking into consideration ecological values and the values of landscape aesthetics. When implementing soil and water bioengineering structures, suitable plants must be selected, and the structures must be given a dimension taking into account potential impact loads. A consideration of energy flows and the potential negative impact of construction in terms of energy and greenhouse gas balance has been neglected until now. The current study closes this gap of knowledge by introducing a method for detecting the possible negative effects of installing soil and water bioengineering measures. For this purpose, an environmental life cycle assessment model has been applied. The impact categories global warming potential and cumulative energy demand are used in this paper to describe the type of impacts which a bioengineering construction site causes. Additionally, the water bioengineering measure is contrasted with a conventional civil engineering structure. The results determine that the bioengineering alternative performs slightly better, in terms of energy demand and global warming potential, than the conventional measure. The most relevant factor is shown to be the impact of the running machines at the water bioengineering construction site. Finally, an integral ecological assessment model for applications of soil and water bioengineering structures should point out the potential negative effects caused during installation and, furthermore, integrate the assessment of potential positive effects due to the development of living plants in the use stage of the structures.

scholarly journals Life Cycle Assessment of an Innovative Hybrid Energy Storage System for Residential Buildings in Continental Climates

2021 ◽  
Vol 11 (9) ◽  
pp. 3820
Author(s):  
Noelia Llantoy ◽  
Gabriel Zsembinszki ◽  
Valeria Palomba ◽  
Andrea Frazzica ◽  
Mattia Dallapiccola ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Residential Buildings ◽  
Storage System ◽  
Energy Storage System ◽  
Hot Water ◽  
Hybrid Energy ◽  
Hybrid Energy Storage ◽  
Innovative System ◽  
The Impact

With the aim of contributing to achieving the decarbonization of the energy sector, the environmental impact of an innovative system to produce heating and domestic hot water for heating demand-dominated climates is assessed is evaluated. The evaluation is conducted using the life cycle assessment (LCA) methodology and the ReCiPe and IPCC GWP indicators for the manufacturing and operation stages, and comparing the system to a reference one. Results show that the innovative system has a lower overall impact than the reference one. Moreover, a parametric study to evaluate the impact of the refrigerant is carried out, showing that the impact of the overall systems is not affected if the amount of refrigerant or the impact of refrigerant is increased.

scholarly journals Life Cycle Assessment (LCA) of an Innovative Compact Hybrid Electrical-Thermal Storage System for Residential Buildings in Mediterranean Climate

2021 ◽  
Vol 13 (9) ◽  
pp. 5322
Author(s):  
Gabriel Zsembinszki ◽  
Noelia Llantoy ◽  
Valeria Palomba ◽  
Andrea Frazzica ◽  
Mattia Dallapiccola ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Mediterranean Climate ◽  
Residential Buildings ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Hot Water ◽  
Electrical Consumption ◽  
The Impact

The buildings sector is one of the least sustainable activities in the world, accounting for around 40% of the total global energy demand. With the aim to reduce the environmental impact of this sector, the use of renewable energy sources coupled with energy storage systems in buildings has been investigated in recent years. Innovative solutions for cooling, heating, and domestic hot water in buildings can contribute to the buildings’ decarbonization by achieving a reduction of building electrical consumption needed to keep comfortable conditions. However, the environmental impact of a new system is not only related to its electrical consumption from the grid, but also to the environmental load produced in the manufacturing and disposal stages of system components. This study investigates the environmental impact of an innovative system proposed for residential buildings in Mediterranean climate through a life cycle assessment. The results show that, due to the complexity of the system, the manufacturing and disposal stages have a high environmental impact, which is not compensated by the reduction of the impact during the operational stage. A parametric study was also performed to investigate the effect of the design of the storage system on the overall system impact.

Sign in / Sign up

Export Citation Format

Share Document