Vertically-Aligned Springless Energy Harvester

2011 ◽  
Author(s):  
Mohamed Bendame ◽  
Karim Elrayes ◽  
Mohamed Mahmoud ◽  
Eihab M. Abdel-Rahman ◽  
Ehab El-Saadany ◽  
...  
Keyword(s):  
Mathematical Model ◽  
Nonlinear Oscillator ◽  
Energy Harvester ◽  
Vibration Energy ◽  
Test Results ◽  
Impact Oscillator ◽  
Vibration Energy Harvester ◽  
Vertically Aligned

This paper analyzes a new configuration of a recently proposed “springless” vibration energy harvester. In this study, the harvester is positioned so that its oscillations are aligned vertically acting against gravity. The MPG response is investigated experimentally. Test results show that the VEH behaves as a softening nonlinear oscillator even for small excitations. A mathematical model of the underlying impact oscillator is also derived and its parameters are estimated.

Test and Validation of a Nonlinear Electromagnetic Energy Harvester

2014 ◽  
Author(s):  
Mohamed Bendame ◽  
Eihab Abdel-Rahman ◽  
Mostafa Soliman
Keyword(s):  
Energy Harvester ◽  
Vibration Energy ◽  
Frequency Bandwidth ◽  
Impact Oscillator ◽  
Vibration Energy Harvester ◽  
Optimal Power ◽  
Optimal Load ◽  
New Type ◽  
Input Acceleration ◽  
Double Impact

We investigate a new type of nonlinear vibration energy harvester that uses a double impact oscillator as its harvesting element. A prototype of the harvester is analyzed numerically and experimentally when aligned vertically. Results show that the new architecture enhanced the output power as well as the frequency bandwidth in comparison with linear harvesters. The new harvester is capable of generating up to 250 mV and has a harvesting bandwidth of about 6 Hz. The optimal load for 0.7 g input acceleration is found to be 5.5 Ω and the corresponding optimal power is determined to be 8 mWatts.

Simply supported FPEDs connected by springs for broadband energy harvesting

2020 ◽  
Vol 64 (1-4) ◽  
pp. 201-210
Author(s):  
Yoshikazu Tanaka ◽  
Satoru Odake ◽  
Jun Miyake ◽  
Hidemi Mutsuda ◽  
Atanas A. Popov ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Evaluation Method ◽  
Energy Harvester ◽  
Vibrational Energy ◽  
Functional Materials ◽  
Vibration Energy ◽  
Theoretical Evaluation ◽  
Vibration Energy Harvester ◽  
Polyvinylidene Difluoride ◽  
Simply Supported

Energy harvesting methods that use functional materials have attracted interest because they can take advantage of an abundant but underutilized energy source. Most vibration energy harvester designs operate most effectively around their resonant frequency. However, in practice, the frequency band for ambient vibrational energy is typically broad. The development of technologies for broadband energy harvesting is therefore desirable. The authors previously proposed an energy harvester, called a flexible piezoelectric device (FPED), that consists of a piezoelectric film (polyvinylidene difluoride) and a soft material, such as silicon rubber or polyethylene terephthalate. The authors also proposed a system based on FPEDs for broadband energy harvesting. The system consisted of cantilevered FPEDs, with each FPED connected via a spring. Simply supported FPEDs also have potential for broadband energy harvesting, and here, a theoretical evaluation method is proposed for such a system. Experiments are conducted to validate the derived model.

Hybrid Vibration Energy Harvester based on Stochastic Resonance

2018 ◽  
Vol 138 (5) ◽  
pp. 185-190
Author(s):  
Meng Su ◽  
Dai Kobayashi ◽  
Nobuyuki Takama ◽  
Beomjoon Kim
Keyword(s):  
Stochastic Resonance ◽  
Energy Harvester ◽  
Vibration Energy ◽  
Vibration Energy Harvester
Sign in / Sign up

Export Citation Format

Share Document