Effects of Geometric and Material Properties on Electrical Power Harvested From a Bimorph Piezoelectric Cantilever Beam

2011 ◽  
Author(s):  
Nataraj Chandrasekharan ◽  
Jaehyung Ju ◽  
Lonny Thompson
Keyword(s):  
Finite Element ◽  
Piezoelectric Material ◽  
Cantilever Beam ◽  
Lead Zirconate Titanate ◽  
Three Dimensional ◽  
Fe Model ◽  
Constant Length ◽  
Piezoelectric Cantilever ◽  
Dimensional Finite Element ◽  
Three Dimensional Finite Element

In this paper, a three-dimensional finite element (FE) model is developed to design a vibrating bimorph piezoelectric cantilever beam for energy harvesting. A parametric study of electric power generated as a function of the dielectric constant, transverse piezoelectric strain constant, length and thickness of the piezoelectric material, is conducted for a time-harmonic surface pressure load. The reference piezoelectric material used in the design is Lead Zirconate Titanate (PZT-5H). Complete transversely isotropic elastic and piezoelectric properties are assigned to the bimorph layers with brass chosen as the substrate material in the three-dimensional finite element model. The numerical analysis shows that a uniform decrease in thickness and length coverage of the piezoelectric layers results in a nonlinear reduction in power amplitude, which suggests optimal values. Using design of experiments (DOE), a study was conducted to determine the sensitivity of power with respect to the geometric and material variables.

scholarly journals Evaluation of the Effects of the Chincup Appliance on the Craniofacial Structures by the Finite Element Analysis

2017 ◽  
Vol 7 ◽  
pp. 219-223
Author(s):  
Beril Demir Karamanli ◽  
Hülya Kılıçoğlu ◽  
Armagan Fatih Karamanli
Keyword(s):  
Finite Element ◽  
Three Dimensional ◽  
Fe Model ◽  
Analysis Method ◽  
Class Iii ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Dimensional Finite Element ◽  
Three Dimensional Finite Element ◽  
Clinical Changes

Aims The aim of this study is to evaluate the effects of the chincup appliance used in the treatment of Class III malocclusions, not only on the mandible or temporomandibular joint (TMJ) but also on all the craniofacial structures. Materials and Methods Chincup simulation was performed on a three-dimensional finite element (FE) model. 1000 g (500 g per side) force was applied in the direction of chin-condyle head. Nonlinear FE analysis was used as the numerical analysis method. Results By the application of chincup, stresses were distributed not only on TMJ or mandible but also on the circummaxillary sutures and other craniofacial structures. Conclusions Clinical changes obtained by chincup treatment in Class III malocclusions are not limited by only mandible. It was seen that also further structures were affected.

Residual Stress Prediction for Non-Axisymmetric Vessel Penetration Welds

2008 ◽  
Author(s):  
Kazuo Ogawa ◽  
Nobuyoshi Yanagida ◽  
Koichi Saito
Keyword(s):  
Residual Stress ◽  
Finite Element ◽  
Three Dimensional ◽  
Measurement Data ◽  
Fe Model ◽  
Stress Distributions ◽  
Dimensional Finite Element ◽  
Stress Prediction ◽  
Three Dimensional Finite Element ◽  
Good Agreement

Residual stress distribution in an oblique nozzle jointed to a vessel with J-groove welds was analyzed using a three-dimensional finite element method. All welding passes were considered in a 180-degree finite element (FE) model with symmetry. Temperature and stress were modeled for simultaneous bead laying. To determine residual stress distributions at the welds experimentally, a mock-up specimen was manufactured. The analytical results show good agreement with the experimental measurement data, indicating that FE modeling is valid.

Three Dimensional Finite Element Analyses of Welding Residual Stresses of a Repaired Weld

2018 ◽  
Author(s):  
Mingya Chen ◽  
Weiwei Yu ◽  
Fei Xue ◽  
Francis Ku ◽  
Zhilin Chen ◽  
...  
Keyword(s):  
Finite Element ◽  
Residual Stresses ◽  
Nuclear Power ◽  
Power Plants ◽  
Three Dimensional ◽  
Fe Model ◽  
Dimensional Finite Element ◽  
Surge Line ◽  
Line Slope ◽  
Three Dimensional Finite Element

The objective of this study is to correct installation non-conformance of a surge line using the excavation and re-weld method which is widely used in nuclear power plants. The surge line with a backslope was not at the required design level after initial installation. In order to solve the problem, a repairing technology is shown as follows: the weld was successively excavated and welded again while the surge line slope was corrected with the help of jacks. Because many of the degradation mechanisms relevant to power plant components can be accelerated by the presence of welding residual stresses (WRS), the WRS caused by the repairing process need to be studied. In this paper, the WRS simulation technique employed in this project is sophisticated. It utilizes a 3-D finite element (FE) model, and simulates the weld sequencing and excavation. Moreover, the WRS simulation performed in this project not only uses the un-axisymmetric model, but also considers the deformation caused by the external jacking loads. The results show that the repairing process is effective, and strain damage induced by the welding repair is also acceptable.

Three-Dimensional Finite Element Analysis of Skin-Pass Rolling and New Models for Process Control

2017 ◽  
Vol 139 (9) ◽  
Author(s):  
Sung Jin Yoon ◽  
Tae Jin Shin ◽  
Jae Sang Lee ◽  
Sang Moo Hwang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Three Dimensional ◽  
Coupled Analysis ◽  
Stress Profile ◽  
Fe Model ◽  
Element Analysis ◽  
Skin Pass ◽  
Dimensional Finite Element ◽  
Three Dimensional Finite Element

This paper describes in detail the deformation behavior of the rolls and strip predicted from the three-dimensional finite element analysis of skin-pass rolling. The predictions are made on the basis of the coupled analysis of elastic deformation of the rolls and elastic–plastic deformation of the strip. Predictions from the proposed finite element (FE) model are compared with experimental data from laboratory-scale cold rolling mills. Then, proposed are models for the prediction of the roll force profile and for the prediction of the residual stress profile. The prediction accuracy of the models is examined through comparison with the predictions from the FE model.

scholarly journals A Three-Dimensional Finite-Element Model of a Human Dry Skull for Bone-Conduction Hearing

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Namkeun Kim ◽  
You Chang ◽  
Stefan Stenfelt
Keyword(s):  
Finite Element ◽  
Bone Conduction ◽  
Three Dimensional ◽  
Human Head ◽  
Element Model ◽  
Fe Model ◽  
Lateral Direction ◽  
Dimensional Finite Element ◽  
Simulation Results ◽  
Three Dimensional Finite Element

A three-dimensional finite-element (FE) model of a human dry skull was devised for simulation of human bone-conduction (BC) hearing. Although a dry skull is a simplification of the real complex human skull, such model is valuable for understanding basic BC hearing processes. For validation of the model, the mechanical point impedance of the skull as well as the acceleration of the ipsilateral and contralateral cochlear bone was computed and compared to experimental results. Simulation results showed reasonable consistency between the mechanical point impedance and the experimental measurements when Young’s modulus for skull and polyurethane was set to be 7.3 GPa and 1 MPa with 0.01 and 0.1 loss factors at 1 kHz, respectively. Moreover, the acceleration in the medial-lateral direction showed the best correspondence with the published experimental data, whereas the acceleration in the inferior-superior direction showed the largest discrepancy. However, the results were reasonable considering that different geometries were used for the 3D FE skull and the skull used in the published experimental study. The dry skull model is a first step for understanding BC hearing mechanism in a human head and simulation results can be used to predict vibration pattern of the bone surrounding the middle and inner ear during BC stimulation.

A three-dimensional finite element model from computed tomography data: A semi-automated method

2001 ◽  
Vol 215 (2) ◽  
pp. 203-212 ◽  
Author(s):  
P M Cattaneo ◽  
M Dalstra ◽  
L H Frich
Keyword(s):  
Computed Tomography ◽  
Finite Element ◽  
Three Dimensional ◽  
Patient Specific ◽  
Fe Model ◽  
Element Analysis ◽  
Automated Method ◽  
Bone Properties ◽  
Dimensional Finite Element ◽  
Three Dimensional Finite Element

Three-dimensional finite element analysis is one of the best ways to assess stress and strain distributions in complex bone structures. However, accuracy in the results may be achieved only when accurate input information is given. A semi-automated method to generate a finite element (FE) model using data retrieved from computed tomography (CT) was developed. Due to its complex and irregular shape, the glenoid part of a left embalmed scapula bone was chosen as working material. CT data were retrieved using a standard clinical CT scanner (Siemens Somatom Plus 2, Siemens AG, Germany). This was done to produce a method that could later be utilized to generate a patient-specific FE model. Different methods of converting Hounsfield unit (HU) values to apparent densities and subsequently to Young's moduli were tested. All the models obtained were loaded using three-dimensional loading conditions taken from literature, corresponding to an arm abduction of 90°. Additional models with different amounts of elements were generated to verify convergence. Direct comparison between the models showed that the best method to convert HU values directly to apparent densities was to use different equations for cancellous and cortical bone. In this study, a reliable method of determining both geometrical data and bone properties from patient CT scans for the semi-automated generation of an FE model is presented.

Comparative Study of Predictive Finite Element Methods for Mechanical Properties in 2D Woven Carbon/Carbon Composites

2008 ◽  
Vol 59 ◽  
pp. 116-119
Author(s):  
Joshim Ali ◽  
Derek Buckthorpe ◽  
Allister Cheyne ◽  
Johar Farooqi ◽  
Paul M. Mummery
Keyword(s):  
Finite Element ◽  
Three Dimensional ◽  
Tensile Tests ◽  
Unit Cell ◽  
Carbon Composites ◽  
Fe Model ◽  
Dimensional Finite Element ◽  
Composite Microstructure ◽  
Tomographic Data ◽  
Three Dimensional Finite Element

Three-dimensional finite element (FE) methods are used to predict the Young’s modulus of two types of 2D woven carbon/carbon composites. Tensile tests are performed to validate the predictions. The results indicate that a novel image-based route in generating FE meshes gave strong agreement with experimental data, while a comparative unit cell FE model of the structure was found to be poorer. The differences between the image-based and unit cell methodologies were the consideration of the finer architectures of the composites and their porosity. The image-based approach highlighted true porosity in the structure due to meshes forming directly from X-ray tomographic data. However, the finer fibre architectures of the composites were compromised because of limitations in the pixel resolutions employed during the initial scanning process. In comparison, the unit cell models were based solely on idealisations of the composite microstructure, in which porosity was neglected.

On Predicting Softening Effects in Hard Turned Surfaces—Part II: Finite Element Modeling and Verification

2004 ◽  
Vol 127 (3) ◽  
pp. 484-491 ◽  
Author(s):  
Jing Shi ◽  
C. Richard Liu
Keyword(s):  
Finite Element ◽  
Thermal History ◽  
Three Dimensional ◽  
Cutting Speed ◽  
Cutting Parameters ◽  
Hardness Measurement ◽  
Fe Model ◽  
Dimensional Finite Element ◽  
History Of ◽  
Three Dimensional Finite Element

A material softening model based on thermal activation energy has been successfully established through tempering experiments in the first part of this study. To apply the model to predicting material softening in hard turned surfaces, the thermal history of work material is needed. In this part, a three-dimensional finite element (FE) model of machining hardened 52100 steel is constructed, and coupled thermal-stress analysis is performed to obtain the material thermal history. Then the material softening model uses the computed thermal history as input to predict the material hardness profiles along the depth into the machined surfaces. Overall, the prediction precisely catches the trend of hardness change along depth and agrees reasonably well with the hardness measurement. What’s more, the sensitivity of material softening to cutting parameters is investigated both quantitatively and qualitatively. Within the investigation range, it is observed that the increase of tool flank wear and feed rate produces severe material softening and a deeper softened layer, while the increase of cutting speed causes significant softening to the surface material but hardly changes the softened depth.

scholarly journals The biomechanical effect of the relevant segments after facet-disectomy in different diameters under posterior lumbar percutaneous endoscopes: a three-dimensional finite element analysis

2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Yin Shi ◽  
Yi-Zhou Xie ◽  
Qun Zhou ◽  
Yang Yu ◽  
Xiao-Hong Fan
Keyword(s):  
Finite Element ◽  
Three Dimensional ◽  
Mechanical Effect ◽  
Fe Model ◽  
Element Analysis ◽  
Dimensional Finite Element ◽  
Left And Right ◽  
Different Diameters ◽  
Three Dimensional Finite Element ◽  
Lumbar Facetectomy

Abstract Objective To evaluate the biomechanical influence after percutaneous endoscopic lumbar facetectomy in different diameters on segmental range of motion (ROM) and intradiscal pressure (IDP) of the relevant segments by establishing three dimensional finite element (FE) model. Methods An intact L3–5 model was successfully constructed from the CT of a healthy volunteer as Model A (MA). The Model B (MB), Model C (MC) and Model D (MD) were obtained through facetectomy on L4 inferior facet in diameters 7.5 mm, 10 mm and 15 mm on MA for simulation. The ROM and IDP of L3/4 and L4/5 of four models were all compared in forward flexion, backward extension, left and right bending, left and right rotation. Results Compared with MA, the ROM of L4/5 of MB, MC and MD all increased. MD changed more significantly than MB and MC in backward extension, right bending and right rotation. But that of MB and MC on L3/4 had no prominent change, while MD had a slight increase in backward extension. The IDP of MB and MC on L4/5 in six states was similar to MA, yet MD increased obviously in backward extension, right bending, left and right rotation. The IDP on L3/4 of MB and MC was resemble to MA in six conditions, nevertheless MD increased slightly only in backward extension. Conclusion Compared with the facetectomy in diameters 7.5 mm and 10 mm, the mechanical effect brought by facetectomy in diameter 15 mm on the operating segment changed more significantly, and had a corresponding effect on the adjacent segments.

Sign in / Sign up

Export Citation Format

Share Document