Handling Module of Glass Slide for Whole Human Genome Micro-Array Automated Hybridization Platform

Author(s):  
Jinq-Yu Jiang ◽  
Chun-Hung Huang

A micro-array based automated hybridization platform, ITRI HybOne, with the throughput rate of 12-sets per lot has been proposed and developed for whole human genome expression profiling test. A special handling module has been designed for capturing of Whole Human Genome Micro-array which is a glass slide 75mm in length and 25mm in width and 1mm in thickness. According to the user-defined protocol, an operator can set the heating temperature, washing temperature, heating hours and washing hours before starting the profiling test. Operator inputs target samples and micro-arrays to ITRI HybOne, pushes the Cycle-Start button to start. With the help of the handling module and other automatic devices, after hours of automatic process, the micro-arrays are ready for profile scanning. All the handling modules used in the platform are recycled for next profiling test.

2013 ◽  
Vol 788 ◽  
pp. 57-60
Author(s):  
Chun Cao ◽  
Chun Dong Zhu ◽  
Chen Fu

Warm pressing forming technology has been gradually applied to the forming of automotive friction materials. How to ensure product performance to achieve the target at the same time achieve the maximum energy saving is the research focus of this study. In this paper, by using finite element method, the field of automotive friction materials in warm pressing forming was analyzed, reveals the relationship between the temperature field and the heating temperature/heating time. Furthermore, the energy consumption was analyzed and compared it with hot pressing forming process. The results will have significant guiding to the process optimization in warm pressing forming.


2011 ◽  
Vol 2011 ◽  
pp. 1-5
Author(s):  
Peng Bing ◽  
Wang Jia ◽  
Chai Li-yuan ◽  
Wang Yun-yan ◽  
Mao Ai-li

The photocatalytic degradation rates of methyl orange and antibacterial properties of nano-Ag/TiO2 thin film on ceramics were investigated in this study. XRD was used to detect the structure of film to clarify the impacts on the rates and properties. The effect of film layers, heating temperature, heating time, and embedding of Ag+ on the degradation rates and antibacterial properties were ascertained. The nano-Ag/TiO2 film of 3 layers with AgNO3 3% embedded and treated at 350°C for 2 h would exhibit good performance.


Author(s):  
V.Yu. Lavrinenko ◽  
Yu.A. Lavrinenko ◽  
R.S. Fayruzov ◽  
A.S. Ayrapetyan ◽  
A.S. Kirsanov

The results of experimental studies of flow curves of 32CrB4, 20G2R and 1.4034 (analogue of 40Kh13 steel) steels at different heating temperature of workpieces are presented. Rational intervals of preliminary lowtemperature heating of workpieces made of studied steels are obtained. It allows to decrease forces during cold forging, loads on the working tool and to increase of tool life time up to 2 times.


Blood ◽  
2005 ◽  
Vol 106 (11) ◽  
pp. 4985-4985
Author(s):  
Christophe Roumier ◽  
Olivier Nibourel ◽  
Valérie Soenen ◽  
Céline Villenet ◽  
Sébastien Lignon ◽  
...  

Abstract Among B-CLPD, characterized primarily by morphology and expression of cell surface markers, is is important to identify patients with CD5+ atypical B-CLL that is regarded as clinically more aggressive than typical B-CLL. However these cases are not well defined. To better characterize the genetic lesion observed in atypical B-CLL we have analysed a cohort of 40 patients by CGH microarrays.Study was made on 5 typical B-CLL and on 35 atypical B-CLL patients with either CD20dim or bright expression that do not express cyclin D1. All the patients with atypical B-CLL will be defined as the presence of an absolute B-CD5-positive lymphocytosis > 4 x 109/l and a RMH score < 4. DNA was extracted using QuiAmp kit according to manufacturer recommendations. 2μg of DNA was used in each hybridization experiment. DNA labeling was performed using Cy3dUTP and Cy5 dUTP respectively for control and tumoral sample respectively. CGH-arrays was performed using the 1 Mb Human genome micro-array from “arraygenomics” that contains 3400 BAC clones fully FISH mapped and end sequenced all printed in triplicate. Each experiment was made using two slides in dye swap method. Cy5 and Cy3 fluorescence intensities spot were quantified using Axon Scanner 4100 and Acuity Software. Data were imported into SpectralWare 2.0 software and Normalise Suite, version 2.0, Profiler from Squire lab. Results: Identification of known and previously uncharacterized copy number alterations (CNAs) in the a-B-CLL cells genome was made in all the cases. The CGH profiles revealed that a-B-CLL genome is highly rearranged harbouring large numbers of distinct copy-number aberrations (75 CNAs among 31 chromosomal regions were found). Some of these CNAs are recurrent across different samples, allowing the definition of minimal common regions (MCR) of amplification or deletion. The size of the CNAs was extremely variable from one Bac probe to complete chromosome gains or losses. Specifically, our dataset included the known gains of chromosome 12 (14 cases), and the known deletion at 11q23, 13q14.3, 17p region but also new region of interest as +3p, 3q22 to 3qter, 4pter to 4q35.2, 5p15, 6p25.3 to 6p22, 8q22 to 8q24, 15q15.3 to 15q26, 17q11 to 17qter, +18 and +19 for gains and 1p35,1, 1p33, 2q22.3, 3p26.3 to 3p21.3, 5q34, 6p25.3, 6q16, 6q25.3 to 6q27, 7q31.3 to 7q32.2, 8p23.3 to 8p12, 10q11.2 to 10q21.1, 10q21.3, 10q23.2 to 10q24, 11q22.3 to 11q24.2, 15q14 to 15q21, 16p11.2 to 16q21, 21q22.1 for the deletions.To further corroborate the above finding, we had performed conventional FISH analysis using known probes for del 13q, del 11q, trisomy 12, del 17p and correlate our results with conventional cytogenetic findings when they were available. In all the cases CGH-arrays findings were confirmed by fish analysis or karyotype. The above findings were confirmed also in few cases using the Agilent’s Human Genome CGH Microarray 44K that contains over 40,000 probes. Our first results confirmed BAC arrays results. CGH-arrays appears to be very informative to detect lesion in B-CLPD and show the high frequency of genetic lesions in a-CLL. The biological impact of this lesions by transcriptome analysis on the same sample and the prognosis impact is in progress.


2017 ◽  
Vol 728 ◽  
pp. 307-312
Author(s):  
Kusol Pimapunsri ◽  
Teeradej Wuttipornpun ◽  
Darawan Veeranant

The separation force is one of the most important properties of artificial leather industries. This paper aims to determine an optimal setting of artificial leather laminating process in order to obtain the desired separation force. There are three potential factors directly influence the separation force for both machine direction (MD) and transverse direction (TD). These factors are take-off temperature, heating temperature, and embossing pressure. To study the effect of these factors on the separation force, a 23 factorial design with six replicates is then conducted, and the result is analyzed at a significant level of 0.05. The result shows that all main factors have significant effects to MD and TD. The optimal setting of the laminating process for artificial leather to obtain the desired MD and TD is that using take-off temperature, heating temperature and embossing pressure at 175°C, 150°C and 40 Bar respectively.


PLoS ONE ◽  
2012 ◽  
Vol 7 (5) ◽  
pp. e37139 ◽  
Author(s):  
Tianyi Zhang ◽  
Bowen Song ◽  
Wei Zhu ◽  
Xiao Xu ◽  
Qing Qing Gong ◽  
...  

Author(s):  
V. G. Shmorgun ◽  
A. I. Bogdanov ◽  
V. P. Kulevich ◽  
R. D. Evchits

This work is aimed to the study of the structure and phase composition of the oxide film formed on the surface of the layered coating of the Al-Ni system during high-temperature heating. It was experimentally established that at the initial stages of heat treatment, as a result of the interaction of the Al-Ni system layered coating with atmospheric oxygen, separate sections of Al2O3 oxide are formed on its surface, which are agglomerates of plate crystals of α-modification of nanometer thickness, which increase and grow together with increasing exposure time continuous protective oxide film. An increase in the heating temperature leads to an intensification of oxidation processes and the formation of a complex oxide film of AlO and spinel NiAlO.


Author(s):  
Jiazhong Xu ◽  
Tianyu Fu ◽  
Zhao Hui

The glass fiber reinforced polypropylene (GF/PP) composite ring specimens were fabricated based on the composites prepreg tape winding process. The heated winding process was simulated by ANSYS software to obtain the temperature distribution of the wound layer of the specimen. At the same time, the temperature of the wound layer was collected and stored using a temperature-controlled recorder. The temperature fields between the wound layers were found to be different significantly, and the temperature measured through experiments was generally below the simulation results, where it is especially noticeable in the fusion zone. After the recrystallization of GF/PP specimen, the maximum shear strength that the specimen can withstand was improved. The response surface method was used to test and analyze the influence of recrystallization on the mechanical properties of the specimen, Obtain optimized process parameters, heating temperature of 91 °C, pressure of the press roller is 106 N, heating time of 13 min, the highest sample obtained is 28.67Mpa. The experimental results show that the influence of recrystallization parameters on the mechanical properties of the composite specimens (from large to small) are: heating temperature, heating time, and the roller pressure.


Sign in / Sign up

Export Citation Format

Share Document