The Effect of Various Physical Phenomena on Wave Propagations in the Human Aorta

2007 ◽  
Author(s):  
Ashis Mookerjee ◽  
Ahmed Al-Jumaily ◽  
Andrew Lowe
Keyword(s):  
Experimental Data ◽  
Mathematical Model ◽  
Transfer Function ◽  
Stokes Equations ◽  
Aortic Pressure ◽  
Navier Stokes ◽  
Human Aorta ◽  
Viscous Effects ◽  
Navier Stokes Equations ◽  
Physical Phenomena

A physiologically-correct mathematical model of blood flow in the human aorta is developed from previously reported experimental data. The blood is assumed as a viscous fluid flowing through a compliant tube. This phenomenon is modeled by combining the Navier-Stokes’ equations and Laplace Law. The model is validated using experimental data collected at a leading specialist catheterisation laboratory. The mathematical model is then manipulated to derive a pressure transfer function between the aortic pressure and the pressure at the iliac bifurcation. The results of a comprehensive senstivity analysis carried out on this transfer function are discussed in this article. This study indicates that Coriolis and viscous effects insignificantly affect the wave propagation characteristics. The effect of arterial tapering on the transfer function is also recorded as insignificant. Changing the stiffness of the tube causes the pressure wave to travel faster through the system. The system natural frequency also increases when the tube wall is stiffened.

scholarly journals RESEARCH OF RESEARCH OF νt-92 TURBULENCE MODEL FOR CALCULATING AN AXISYMMETRIC SOUND JET

2020 ◽  
Vol 4 (2) ◽  
pp. 82-90
Author(s):  
Murodil Erkinjon oglu Madaliev ◽  
◽  
Dilshod Primkulovich Navruzov
Keyword(s):  
Experimental Data ◽  
Mathematical Model ◽  
Comparative Analysis ◽  
Turbulence Model ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Calculation Results ◽  
The One ◽  
Subsonic Jet

A comparative analysis of the use of the turbulence model is carried out: the one-parameter Secundov νt-92 model on the problem of an axisymmetric subsonic jet. The calculation results are compared with experimental results on the propagation of speed, voltage, and temperature. The flow is turbulent, therefore, as a mathematical model, the system of Navier-Stokes equations averaged by Reynolds (RANS) is used. For the posed problem, a generalized stream function ψ is introduced. A comparison was made of the results of the νt-92 model with experimental data from [5] the dimensionless axial velocity from the distance to the nozzle

Simulation of the Gap Resonance Between Two Rectangular Barges in Regular Waves by a Free Surface Viscous Flow Solver

2013 ◽  
Author(s):  
B. Elie ◽  
G. Reliquet ◽  
P.-E. Guillerm ◽  
O. Thilleul ◽  
P. Ferrant ◽  
...  
Keyword(s):  
Experimental Data ◽  
Free Surface ◽  
Viscous Flow ◽  
Stokes Equations ◽  
Resonance Phenomenon ◽  
Navier Stokes ◽  
Regular Waves ◽  
Navier Stokes Equations ◽  
Flow Solver ◽  
Gap Resonance

This paper compares numerical and experimental results in the study of the resonance phenomenon which appears between two side-by-side fixed barges for different sea-states. Simulations were performed using SWENSE (Spectral Wave Explicit Navier-Stokes Equations) approach and results are compared with experimental data on two fixed barges with different headings and bilges. Numerical results, obtained using the SWENSE approach, are able to predict both the frequency and the magnitude of the RAO functions.

Mathematical study of a single leukocyte in microchannel flow

2018 ◽  
Vol 13 (5) ◽  
pp. 43 ◽  
Author(s):  
S. Boujena ◽  
O. Kafi ◽  
A. Sequeira
Keyword(s):  
Mathematical Model ◽  
Numerical Approximation ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Microchannel Flow ◽  
Navier Stokes Equations ◽  
Coupled Problem ◽  
Inflammatory Drugs ◽  
The Mathematical Model ◽  
Rate Type

The recruitment of leukocytes and subsequent rolling, activation, adhesion and transmigration are essential stages of an inflammatory response. Chronic inflammation may entail atherosclerosis, one of the most devastating cardiovascular diseases. Understanding this mechanism is of crucial importance in immunology and in the development of anti-inflammatory drugs. Micropipette aspiration experiments show that leukocytes behave as viscoelastic drops during suction. The flow of non-Newtonian viscoelastic fluids can be described by differential, integral and rate-type constitutive equations. In this study, the rate-type Oldroyd-B model is used to capture the viscoelasticity of the leukocyte which is considered as a drop. Our main goal is to analyze a mathematical model describing the deformation and flow of an individual leukocyte in a microchannel flow. In this model we consider a coupled problem between a simplified Oldroyd-B system and a transport equation which describes the density considered as non constant in the Navier–Stokes equations. First we present the mathematical model and we prove the existence of solution, then we describe its numerical approximation using the level set method. Through the numerical simulations we analyze the hemodynamic effects of three inlet velocity values. We note that the hydrodynamic forces pushing the cell become higher with increasing inlet velocities.

Fully Nonlinear Potential/RANSE Simulation of Wave Interaction With Ships and Marine Structures

2008 ◽  
Author(s):  
Pierre Ferrant ◽  
Lionel Gentaz ◽  
Bertrand Alessandrini ◽  
Romain Luquet ◽  
Charles Monroy ◽  
...  
Keyword(s):  
Degrees Of Freedom ◽  
Stokes Equations ◽  
Wave Interaction ◽  
Irregular Waves ◽  
Navier Stokes ◽  
Viscous Effects ◽  
Navier Stokes Equations ◽  
Fully Nonlinear ◽  
Nonlinear Potential ◽  
6 Degrees Of Freedom

This paper documents recent advances of the SWENSE (Spectral Wave Explicit Navier-Stokes Equations) approach, a method for simulating fully nonlinear wave-body interactions including viscous effects. The methods efficiently combines a fully nonlinear potential flow description of undisturbed wave systems with a modified set of RANS with free surface equations accounting for the interaction with a ship or marine structure. Arbitrary incident wave systems may be described, including regular, irregular waves, multidirectional waves, focused wave events, etc. The model may be fixed or moving with arbitrary speed and 6 degrees of freedom motion. The extension of the SWENSE method to 6 DOF simulations in irregular waves as well as to manoeuvring simulations in waves are discussed in this paper. Different illlustative simulations are presented and discussed. Results of the present approach compare favorably with available reference results.

A Cartesian Explicit Solver for Complex Hydrodynamic Applications

2014 ◽  
Author(s):  
P. Bigay ◽  
A. Bardin ◽  
G. Oger ◽  
D. Le Touzé
Keyword(s):  
Level Set ◽  
Incompressible Flows ◽  
Stokes Equations ◽  
Simulation Method ◽  
Navier Stokes ◽  
Viscous Effects ◽  
Navier Stokes Equations ◽  
Eddy Simulation ◽  
Flow Past A Cylinder ◽  
Explicit Solver

In order to efficiently address complex problems in hydrodynamics, the advances in the development of a new method are presented here. This method aims at finding a good compromise between computational efficiency, accuracy, and easy handling of complex geometries. The chosen method is an Explicit Cartesian Finite Volume method for Hydrodynamics (ECFVH) based on a compressible (hyperbolic) solver, with a ghost-cell method for geometry handling and a Level-set method for the treatment of biphase-flows. The explicit nature of the solver is obtained through a weakly-compressible approach chosen to simulate nearly-incompressible flows. The explicit cell-centered resolution allows for an efficient solving of very large simulations together with a straightforward handling of multi-physics. A characteristic flux method for solving the hyperbolic part of the Navier-Stokes equations is used. The treatment of arbitrary geometries is addressed in the hyperbolic and viscous framework. Viscous effects are computed via a finite difference computation of viscous fluxes and turbulent effects are addressed via a Large-Eddy Simulation method (LES). The Level-Set solver used to handle biphase flows is also presented. The solver is validated on 2-D test cases (flow past a cylinder, 2-D dam break) and future improvements are discussed.

scholarly journals Three-Dimensional Turbulent Vortex Shedding From a Surface-Mounted Square Cylinder: Predictions With Large-Eddy Simulations and URANS

2014 ◽  
Vol 136 (6) ◽  
Author(s):  
B. A. Younis ◽  
A. Abrishamchi
Keyword(s):  
Experimental Data ◽  
Turbulence Model ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Large Eddy Simulations ◽  
Navier Stokes ◽  
Reynolds Stresses ◽  
Mean Flow ◽  
Navier Stokes Equations ◽  
Large Eddy

The paper reports on the prediction of the turbulent flow field around a three-dimensional, surface mounted, square-sectioned cylinder at Reynolds numbers in the range 104–105. The effects of turbulence are accounted for in two different ways: by performing large-eddy simulations (LES) with a Smagorinsky model for the subgrid-scale motions and by solving the unsteady form of the Reynolds-averaged Navier–Stokes equations (URANS) together with a turbulence model to determine the resulting Reynolds stresses. The turbulence model used is a two-equation, eddy-viscosity closure that incorporates a term designed to account for the interactions between the organized mean-flow periodicity and the random turbulent motions. Comparisons with experimental data show that the two approaches yield results that are generally comparable and in good accord with the experimental data. The main conclusion of this work is that the URANS approach, which is considerably less demanding in terms of computer resources than LES, can reliably be used for the prediction of unsteady separated flows provided that the effects of organized mean-flow unsteadiness on the turbulence are properly accounted for in the turbulence model.

A Numerical Study of the Hydrodynamics of Reversing Flows Around a Cylinder

1994 ◽  
Vol 116 (4) ◽  
pp. 202-208 ◽  
Author(s):  
K. Nakajima ◽  
Y. Kallinderis ◽  
I. Sibetheros ◽  
R. W. Miksad ◽  
K. Lambrakos
Keyword(s):  
Experimental Data ◽  
Finite Element Method ◽  
Stokes Equations ◽  
Numerical Study ◽  
Offshore Structures ◽  
Two Dimensions ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Random Behavior ◽  
Marching Scheme

A numerical study of the nonlinear and random behavior of flow-induced forces on offshore structures and experimental verification of the results are presented. The numerical study is based on a finite-element method for the unsteady incompressible Navier-Stokes equations in two dimensions. The momentum equations combined with a pressure correction equation are solved employing fourth-order artificial dissipation with a nonstaggered grid, instead of the more commonly used staggered meshes. The solution is advanced in time with a combined explicit and implicit marching scheme. Emphasis is placed on study of reversing flows around a cylinder. Comparisons with experimental data evaluate accuracy and robustness of the method.

Viscosity Effects on the Radiation Hydrodynamics of Horizontal Cylinders

1991 ◽  
Vol 113 (4) ◽  
pp. 334-343 ◽  
Author(s):  
R. W. Yeung ◽  
C.-F. Wu
Keyword(s):  
Numerical Solutions ◽  
Stokes Equations ◽  
Small Body ◽  
Low Frequency ◽  
Body Motion ◽  
Navier Stokes ◽  
Inviscid Fluid ◽  
Viscous Effects ◽  
Navier Stokes Equations ◽  
Horizontal Cylinders

The problem of a body oscillating in a viscous fluid with a free surface is examined. The Navier-Stokes equations and boundary conditions are linearized using the assumption of small body-motion to wavelength ratio. Generation and diffusion of vorticity, but not its convection, are accounted for. Rotational and irrotational Green functions for a divergent and a vorticity source are presented, with the effects of viscosity represented by a frequency Reynolds number Rσ = g2/νσ3. Numerical solutions for a pair of coupled integral equations are obtained for flows about a submerged cylinder, circular or square. Viscosity-modified added-mass and damping coefficients are developed as functions of frequency. It is found that as Rσ approaches infinity, inviscid-fluid results can be recovered. However, viscous effects are important in the low-frequency range, particularly when Rσ is smaller than O(104).

Effects of Non-Dimensional Parameters on Formation and Break Up of Cylindrical Droplets

2004 ◽  
Author(s):  
Mohammad Taeibi-Rahni ◽  
Shervin Sharafatmand
Keyword(s):  
Stokes Equations ◽  
Fluid Model ◽  
Time Dependent ◽  
Navier Stokes ◽  
Ohnesorge Number ◽  
Viscous Effects ◽  
Navier Stokes Equations ◽  
Dimensional Parameters ◽  
Break Up ◽  
Eotvos Number

The consistent behavior of non-dimensional parameters on the formation and break up of large cylindrical droplets has been studied by direct numerical simulations (DNS). A one-fluid model with a finite difference method and an advanced front tracking scheme was employed to solve unsteady, incompressible, viscous, immiscible, multi-fluid, two-dimensional Navier-Stokes equations. This time dependent study allows investigation of evolution of the droplets in different cases. For moderate values of Atwood number (AT), increasing Eotvos number (Eo) explicitly increases the deformation rate in both phenomena. Otherwise, raising the Ohnesorge number (Oh) basically amplifies the viscous effects.

Mathematical and Physical Modeling of Three-Phase Gas-Stirred Ladles

2016 ◽  
Vol 1812 ◽  
pp. 29-34
Author(s):  
Juan A. López ◽  
Marco A. Ramírez-Argáez ◽  
Adrián M. Amaro-Villeda ◽  
Carlos González
Keyword(s):  
Mathematical Model ◽  
Physical Model ◽  
Stokes Equations ◽  
Steel Slag ◽  
Flow Patterns ◽  
Navier Stokes ◽  
Steel Ladle ◽  
Phase System ◽  
Navier Stokes Equations ◽  
Three Phase

ABSTRACTA very realistic 1:17 scale physical model of a 140-ton gas-stirred industrial steel ladle was used to evaluate flow patterns measured by Particle Image Velocimetry (PIV), considering a three-phase system (air-water-oil) to simulate the argon-steel-slag system and to quantify the effect of the slag layer on the flow patterns. The flow patterns were evaluated for a single injector located at the center of the ladle bottom with a gas flow rate of 2.85 l/min, with the presence of a slag phase with a thickness of 0.0066 m. The experimental results obtained in this work are in excellent agreement with the trends reported in the literature for these gas-stirred ladles. Additionally, a mathematical model was developed in a 2D gas-stirred ladle considering the three-phase system built in the physical model. The model was based on the Eulerian approach in which the continuity and the Navier Stokes equations are solved for each phase. Therefore, there were three continuity and six Navier-Stokes equations in the system. Additionally, turbulence in the ladle was computed by using the standard k-epsilon turbulent model. The agreement between numerical simulations and experiments was excellent with respect to velocity fields and turbulent structure, which sets the basis for future works on process analysis with the developed mathematical model, since there are only a few three-phase models reported so far in the literature to predict fluid dynamics in gas-stirred steel ladles.

Sign in / Sign up

Export Citation Format

Share Document