Time Varying Approaches to Dynamic Analysis of a Planetary Gear System Using a Discrete and a Continuous Models

2007 ◽  
Author(s):  
K. J. Huang ◽  
C. C. Liang ◽  
J. Y. Chen
Keyword(s):  
Natural Frequencies ◽  
Planetary Gear ◽  
Gear System ◽  
Dynamic Responses ◽  
Time Varying ◽  
Continuum Approach ◽  
Geometry Model ◽  
Planetary Gear System ◽  
Continuous Geometry ◽  
The Continuum

Two time varying approaches are executed in analyzing dynamics for an involute planetary gear system, which respectively use a conventional discrete model of the equivalent mass-damping-spring elements and a continuous geometry model by the finite element method. In the discrete approach, the tooth number, position, and phasing difference of the meshing tooth pairs are described by time varying and nonlinear meshing stiffnesses. Natural frequencies, deformations, meshing forces, fillet stresses, and dynamic factors can be calculated by using the Jacobi transformation and the Runge-Kutta integration. In the continuum approach, dynamics of the planetary gear system is analyzed using the software, LS-DYNA. The approach of the continuous geometry model can incorporate the time varying properties intrinsically. In this continuum study, not CAD models, high quality mesh elements of the planetary gear system are automatically generated directly using the derived tooth profile equations. After assigning initial and boundary conditions, dynamic responses for the planetary gear system are solved. Natural frequencies and fillet stresses of the both approaches are verified by each other comparison. Potentially, the continuum approach can extensively and sophistically analyze dynamics problems of the planetary gear systems.

Dynamic Response Analysis of Wind Turbine Planetary Gear System With Interval Stiffness Parameters

2014 ◽  
Author(s):  
Sha Wei ◽  
Qinkai Han ◽  
Zhipeng Feng ◽  
Yanhua Shen ◽  
Fulei Chu
Keyword(s):  
Wind Turbine ◽  
Planetary Gear ◽  
Transmission Error ◽  
Gear System ◽  
Dynamic Responses ◽  
Lumped Parameter Model ◽  
Response Analysis ◽  
Mesh Stiffness ◽  
Gear Trains ◽  
Planetary Gear System

Planetary gear transmission system is one of the primary parts of the wind turbine drive train. Due to the assembly state, lubrication conditions and wear, the mesh stiffness of the planetary gear system is an uncertain parameter. In this paper, taking the uncertainty of mesh stiffness into account, the dynamic responses of a wind turbine gear system subjected to wind loads and transmission error excitations are studied. Firstly, a lumped-parameter model is extended to include both the planetary and parallel gears. Then the fluctuation ranges of dynamic mesh forces are predicted quantitatively and intuitively based on the combined Chebyshev interval inclusion function and numerical integration method. Finally, examples of gear trains with different interval mesh stiffnesses are simulated and the results show that tooth separations are becoming more obvious at the resonant speed by considering the fluctuating mesh stiffness of the second parallel gear stage. The nonlinear tooth separations are degenerated obviously as the fluctuation error of the mesh stiffness of the second parallel gear set is increased.

scholarly journals Dynamic modeling and vibration analysis of a cracked 3K-II planetary gear set for fault detection

2021 ◽  
Vol 12 (2) ◽  
pp. 847-861
Author(s):  
Meng Sang ◽  
Kang Huang ◽  
Yangshou Xiong ◽  
Guangzhi Han ◽  
Zhenbang Cheng
Keyword(s):  
Fault Diagnosis ◽  
Torsional Vibration ◽  
Gear Tooth ◽  
Planetary Gear ◽  
Gear System ◽  
Gear Train ◽  
Lumped Parameter Model ◽  
Time Varying ◽  
Vibration Signals ◽  
Planetary Gear System

Abstract. The 3K planetary gear system is a basic planetary transmission structure with many advantages over the 2K-H planetary gear system. However, the vibration characteristics will be more complicated due to the increase of central gears meshing with each planet gear simultaneously. In this paper, a lumped-parameter model for a 3K-II planetary gear set was developed to simulate the dynamic response. The time-varying stiffness of each meshing pair for different gear tooth root crack faults is calculated via the finite element method. By considering the effect of time-varying transmission paths, the transverse synthetic vibrations are obtained. Subsequently, the feasibilities of transverse synthetic vibration signals and output torsional vibration signals as reference for fault diagnosis are analyzed by studying the time-domain and frequency-domain characteristics of these two vibration signals. The results indicate that both the transverse synthetic vibration signals and output torsional vibration signals can be used for fault identification and localization of the 3K-II planetary gear train, and yet they both have their limitations. Some results of this paper are available as references for the fault diagnosis of 3K planetary gear trains.

Dynamic Features of a Planetary Gear System With Tooth Crack Under Different Sizes and Inclination Angles

2013 ◽  
Vol 135 (3) ◽  
Author(s):  
Zaigang Chen ◽  
Yimin Shao
Keyword(s):  
Planetary Gear ◽  
Gear System ◽  
Dynamic Responses ◽  
Tooth Root ◽  
Dynamic Features ◽  
Planetary Gears ◽  
Inclination Angles ◽  
Planet Gear ◽  
Planetary Gear System ◽  
Root Crack

Planetary gears are widely used in the industry due to their advantages of compactness, high power-to-weight ratios, high efficiency, and so on. However, planetary gears such as that in wind turbine transmissions always operate under dynamic conditions with internal and external load fluctuations, which accelerate the occurrence of gear failures, such as tooth crack, pitting, spalling, wear, scoring, scuffing, etc. As one of these failure modes, gear tooth crack at the tooth root due to tooth bending fatigue or excessive load is investigated; how it influences the dynamic features of planetary gear system is studied. The applied tooth root crack model can simulate the propagation process of the crack along tooth width and crack depth. With this approach, the mesh stiffness of gear pairs in mesh is obtained and incorporated into a planetary gear dynamic model to investigate the effects of the tooth root crack on the planetary gear dynamic responses. Tooth root cracks on the sun gear and on the planet gear are considered, respectively, with different crack sizes and inclination angles. Finally, analysis regarding the influence of tooth root crack on the dynamic responses of the planetary gear system is performed in time and frequency domains, respectively. Moreover, the differences in the dynamic features of the planetary gear between the cases that tooth root crack on the sun gear and on the planet gear are found.

An analyzing method of coupled modes in multi-stage planetary gear system

2014 ◽  
Vol 15 (11) ◽  
pp. 2357-2366 ◽  
Author(s):  
Wei Sun ◽  
Xin Ding ◽  
Jing Wei ◽  
Xinglong Hu ◽  
Qingguo Wang
Keyword(s):  
Planetary Gear ◽  
Gear System ◽  
Coupled Modes ◽  
Multi Stage ◽  
Planetary Gear System

Analysis of nonlinear dynamic characteristic of a planetary gear system considering tooth surface friction

2021 ◽  
pp. 135065012199174
Author(s):  
Jingyue Wang ◽  
Ning Liu ◽  
Haotian Wang ◽  
Jiaqiang E
Keyword(s):  
Damping Ratio ◽  
Excitation Frequency ◽  
Planetary Gear ◽  
Gear System ◽  
Tooth Surface ◽  
Lumped Mass ◽  
Heavy Load ◽  
Light Load ◽  
Planetary Gear System ◽  
Bifurcation Behavior

Based on the lumped mass method, a torsional vibration model of the planetary gear system is established considering the nonlinear factors such as friction, time-varying meshing stiffness, backlash, and comprehensive error. The Runge–Kutta numerical method is used to analyze the motion characteristics of the system with various parameters and the influence of tooth friction on the bifurcation and chaos characteristics of the system. The numerical simulation results show that the system has rich bifurcation behavior with the excitation frequency, damping ratio, comprehensive error amplitude, load and backlash, and experiences multiple periodic motion and chaotic motion. Tooth friction makes the bifurcation behavior of the system fuzzy in the high frequency and heavy load areas, makes the chaos of the system restrained in the low-damping ratio and light load areas, advances the bifurcation point of the system in the small comprehensive error amplitude area, and makes the period window of the chaos area larger in the large-backlash area, which makes the bifurcation behavior of the system more complex.

Effect of the bearing clearance on vibrations of a double-row planetary gear system

2019 ◽  
Vol 234 (2) ◽  
pp. 347-357
Author(s):  
Jing Liu ◽  
Shizhao Ding ◽  
Linfeng Wang ◽  
Hongwu Li ◽  
Jin Xu
Keyword(s):  
Contact Stiffness ◽  
Planetary Gear ◽  
Gear Ratio ◽  
Gear System ◽  
Double Row ◽  
External Torque ◽  
Bearing Clearance ◽  
Gear Systems ◽  
Planetary Gear System ◽  
Stiffness And Damping

The bearing clearance, external torque, and input speed can greatly affect vibrations of the planetary gear system. The double-row planetary gear systems are commonly used in the gearbox of special vehicles, which are the key parts to obtain a larger gear ratio. Although many works have been presented to study those factors on vibrations of the single-row planetary gear system, a few works were focused on vibrations of the double-row planetary gear system with the bearing clearance. To overcome this problem, a multi-body dynamic model of a double-row planetary gear system with six planet bearings and one supported bearing of the sun gear is presented. This model is the main part of a gear box transmission system. The new model is developed for studying the effect of the bearing clearance on the planetary system. The meshing stiffness and damping between the gears are obtained by current methods in the listed references, as well as the contact stiffness and damping in bearings. The liner stiffness and damping model is used. The effects of the bearing clearance, external torque, and input speed on vibrations of the system are analyzed. The results show that vibrations of the ring gear and sun gear decrease with the increment of the external torque and increase with the increment of the input speed. Moreover, a reasonable bearing clearance can be helpful for reducing system vibrations for some mating external torque and input speed conditions. The results can provide some guidance to find new method to reduce vibrations and increase the service life of planetary gear systems.

Sign in / Sign up

Export Citation Format

Share Document