Comparison of Three-Dimensional Flexible Beam Elements for Dynamic Analysis: Finite Element Method and Absolute Nodal Coordinate Formulation

2005 ◽  
Author(s):  
A. L. Schwab ◽  
J. P. Meijaard
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Dynamic Analysis ◽  
Flexible Beam ◽  
Shear Locking ◽  
Elastic Line ◽  
Absolute Nodal Coordinate ◽  
Bending Mode ◽  
Asymmetric Bending ◽  
Element Method

Three formulations for a flexible spatial beam element for dynamic analysis are compared: a finite element method (FEM) formulation, an absolute nodal coordinate (ANC) formulation with a continuum mechanics approach and an ANC formulation with an elastic line concept where the shear locking of the asymmetric bending mode is suppressed by the application of the Hellinger–Reissner principle. The comparison is made by means of an eigenfrequency analysis on two stylized problems. It is shown that the ANC continuum approach yields too large torsional and flexural rigidity and that shear locking suppresses the asymmetric bending mode. The presented ANC formulation with the elastic line concept resolves most of these problems.

Comparison of Three-Dimensional Flexible Beam Elements for Dynamic Analysis: Classical Finite Element Formulation and Absolute Nodal Coordinate Formulation

2009 ◽  
Vol 5 (1) ◽  
Author(s):  
A. L. Schwab ◽  
J. P. Meijaard
Keyword(s):  
Dynamic Analysis ◽  
Absolute Nodal Coordinate Formulation ◽  
Three Dimensional ◽  
Flexible Beam ◽  
Element Formulation ◽  
Shear Locking ◽  
Elastic Line ◽  
Absolute Nodal Coordinate ◽  
Beam Elements ◽  
Bending Mode

Three formulations for a flexible spatial beam element for dynamic analysis are compared: a Timoshenko beam with large displacements and rotations, a fully parametrized element according to the absolute nodal coordinate formulation (ANCF), and an ANCF element based on an elastic line approach. In the last formulation, the shear locking of the antisymmetric bending mode is avoided by the application of either the two-field Hellinger–Reissner or the three-field Hu–Washizu variational principle. The comparison is made by means of linear static deflection and eigenfrequency analyses on stylized problems. It is shown that the ANCF fully parametrized element yields too large torsional and flexural rigidities, and shear locking effectively suppresses the antisymmetric bending mode. The presented ANCF formulation with the elastic line approach resolves most of these problems.

A New Approach to the Rigid Finite Element Method in Modeling Spatial Slender Systems

2018 ◽  
Vol 18 (02) ◽  
pp. 1850017 ◽  
Author(s):  
Iwona Adamiec-Wójcik ◽  
Łukasz Drąg ◽  
Stanisław Wojciech
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Dynamic Analysis ◽  
Equations Of Motion ◽  
Nonlinear Dynamic Analysis ◽  
New Approach ◽  
Static And Dynamic Analysis ◽  
Rigid Finite Element Method ◽  
Longitudinal Flexibility ◽  
Element Method

The static and dynamic analysis of slender systems, which in this paper comprise lines and flexible links of manipulators, requires large deformations to be taken into consideration. This paper presents a modification of the rigid finite element method which enables modeling of such systems to include bending, torsional and longitudinal flexibility. In the formulation used, the elements into which the link is divided have seven DOFs. These describe the position of a chosen point, the extension of the element, and its orientation by means of the Euler angles Z[Formula: see text]Y[Formula: see text]X[Formula: see text]. Elements are connected by means of geometrical constraint equations. A compact algorithm for formulating and integrating the equations of motion is given. Models and programs are verified by comparing the results to those obtained by analytical solution and those from the finite element method. Finally, they are used to solve a benchmark problem encountered in nonlinear dynamic analysis of multibody systems.

Sign in / Sign up

Export Citation Format

Share Document