25MW Class Modern Industrial Gas Turbine Suitable for Wide Range of Applications in CoGen/CC Power Plants

1996 ◽  
Author(s):  
Chuck Stankiewicz ◽  
Septimus van der Linden
Keyword(s):  
Gas Turbine ◽  
Power Plants ◽  
Developing Economies ◽  
District Heating ◽  
Advanced Technology ◽  
South East Asia ◽  
Wide Range ◽  
Turbine Component ◽  
Industrial Gas Turbine ◽  
Petrochemical Industries

The GT10 25MW class industrial gas turbine from ABB has seen a rapid success in power as well as heat generation for utilities, district heating plants, refineries, communities, universities, paper & food, cement and petrochemical industries. This broad application attests to the versatility of a modern gas turbine benefiting from advanced technology concepts in combustion, as well as turbine component efficiencies. The paper will review these developments and some interesting applications that could benefit dispersed industrial power plants in the fast developing economies of South East Asia.

Parametric Analysis of Combined Cycles Equipped With Inlet Fogging

2006 ◽  
Vol 128 (2) ◽  
pp. 326-335 ◽  
Author(s):  
R. Bhargava ◽  
M. Bianchi ◽  
F. Melino ◽  
A. Peretto
Keyword(s):  
Power Generation ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Power Plants ◽  
Combined Cycle ◽  
Advanced Technology ◽  
Fuel Prices ◽  
Power Enhancement ◽  
Wide Range ◽  
Combined Cycles

In recent years, deregulation in the power generation market worldwide combined with significant variation in fuel prices and a need for flexibility in terms of power augmentation specially during periods of high electricity demand (summer months or noon to 6:00 p.m.) has forced electric utilities, cogenerators and independent power producers to explore new power generation enhancement technologies. In the last five to ten years, inlet fogging approach has shown more promising results to recover lost power output due to increased ambient temperature compared to the other available power enhancement techniques. This paper presents the first systematic study on the effects of both inlet evaporative and overspray fogging on a wide range of combined cycle power plants utilizing gas turbines available from the major gas turbine manufacturers worldwide. A brief discussion on the thermodynamic considerations of inlet and overspray fogging including the effect of droplet dimension is also presented. Based on the analyzed systems, the results show that high pressure inlet fogging influences performance of a combined cycle power plant using an aero-derivative gas turbine differently than with an advanced technology or a traditional gas turbine. Possible reasons for the observed differences are discussed.

scholarly journals Comparative analysis of the Allam cycle and the cycle of compressorless combined cycle gas turbine unit

2020 ◽  
Vol 209 ◽  
pp. 03023
Author(s):  
Mikhail Sinkevich ◽  
Anatoliy Kosoy ◽  
Oleg Popel
Keyword(s):  
Comparative Analysis ◽  
Gas Turbine ◽  
Thermal Efficiency ◽  
Power Plants ◽  
Thermal Power ◽  
District Heating ◽  
Combined Cycle ◽  
Working Fluid ◽  
District Heating System ◽  
Wide Range

Nowadays, alternative thermodynamic cycles are actively studied. They allow to remove CO2, formed as a result of fuel combustion, from a cycle without significant energy costs. Calculations have shown that such cycles may meet or exceed the most advanced power plants in terms of heat efficiency. The Allam cycle is recognized as one of the best alternative cycles for the production of electricity. Nevertheless, a cycle of compressorless combined cycle gas turbine (CCGT) unit is seemed more promising for cogeneration of electricity and heat. A comparative analysis of the thermal efficiency of these two cycles was performed. Particular attention was paid to ensuring equal conditions for comparison. The cycle of compressorless CCGT unit was as close as possible to the Allam cycle due to the choice of parameters. The processes, in which the difference remained, were analysed. Thereafter, an analysis of how close the parameters, adopted for comparison, to optimal for the compressorless CCGT unit cycle was made. This analysis showed that these two cycles are quite close only for the production of electricity. The Allam cycle has some superiority but not indisputable. However, if cogeneration of electricity and heat is considered, the thermal efficiency of the cycle of compressorless CCGT unit will be significantly higher. Since it allows to independently regulate a number of parameters, on which the electric power, the ratio of electric and thermal power, the temperature of a working fluid at the turbine inlet depend. Thus, the optimal parameters of the thermodynamic cycle can be obtained in a wide range of operating modes of the unit with different ratios of thermal and eclectic powers. Therefore, the compressorless CCGT unit can significantly surpass the best steam turbine and combined cycle gas turbine plants in district heating system in terms of thermal efficiency.

Parametric Analysis of Combined Cycles Equipped With Inlet Fogging

2003 ◽  
Author(s):  
R. Bhargava ◽  
M. Bianchi ◽  
F. Melino ◽  
A. Peretto
Keyword(s):  
Power Generation ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Power Plants ◽  
Combined Cycle ◽  
Advanced Technology ◽  
Fuel Prices ◽  
Power Enhancement ◽  
Wide Range ◽  
Combined Cycles

In recent years, deregulation in the power generation market worldwide combined with significant variation in fuel prices and a need for flexibility in terms of power augmentation specially during periods of high electricity demand (summer months or noon to 6 PM) has forced electric utilities, cogenerators and independent power producers to explore new power generation enhancement technologies. In the last 5–10 years, inlet fogging approach has shown more promising results to recover lost power output due to increased ambient temperature compared to the other available power enhancement techniques. This paper presents the first systematic study on the effects of both inlet evaporative and overspray fogging on a wide range of combined cycle power plants utilizing gas turbines available from the major gas turbine manufacturers worldwide. A brief discussion on the thermodynamic considerations of inlet and overspray fogging including the effect of droplet dimension is also presented. Based on the analyzed systems, the results show that high pressure inlet fogging influences performance of a combined cycle power plant using an aero-derivative gas turbine differently than with an advanced technology or a traditional gas turbine. Possible reasons for the observed differences are discussed.

scholarly journals Modeling of advanced fossil fuel power plants

2021 ◽  
Author(s):  
Farshid Zabihian
Keyword(s):  
Power Generation ◽  
Gas Turbine ◽  
Power Plants ◽  
Fossil Fuel ◽  
Specific Power ◽  
Operating Pressure ◽  
Utilization Factor ◽  
Fuel Switching ◽  
Wide Range ◽  
Cycle Efficiency

The first part of this thesis deals with greenhouse gas (GHG) emissions from fossil fuel-fired power stations. The GHG emission estimation from fossil fuel power generation industry signifies that emissions from this industry can be significantly reduced by fuel switching and adaption of advanced power generation technologies. In the second part of the thesis, steady-state models of some of the advanced fossil fuel power generation technologies are presented. The impacts of various parameters on the solid oxide fuel cell (SOFC) overpotentials and outputs are investigated. The detail analyses of operation of the hybrid SOFC-gas turbine (GT) cycle when fuelled with methane and syngas demonstrate that the efficiencies of the cycles with and without anode exhaust recirculation are close, but the specific power of the former is much higher. The parametric analysis of the performance of the hybrid SOFC-GT cycle indicates that increasing the system operating pressure and SOFC operating temperature and fuel utilization factor improves cycle efficiency, but the effects of the increasing SOFC current density and turbine inlet temperature are not favourable. The analysis of the operation of the system when fuelled with a wide range of fuel types demonstrates that the hybrid SOFC-GT cycle efficiency can be between 59% and 75%, depending on the inlet fuel type. Then, the system performance is investigated when methane as a reference fuel is replaced with various species that can be found in the fuel, i.e., H₂, CO₂, CO, and N₂. The results point out that influence of various species can be significant and different for each case. The experimental and numerical analyses of a biodiesel fuelled micro gas turbine indicate that fuel switching from petrodiesel to biodiesel can influence operational parameters of the system. The modeling results of gas turbine-based power plants signify that relatively simple models can predict plant performance with acceptable accuracy. The unique feature of these models is that they are developed based on similar assumptions and run at similar conditions; therefore, their results can be compared. This work demonstrates that, although utilization of fossil fuels for power generation is inevitable, at least in the short- and mid-term future, it is possible and practical to carry out such utilization more efficiently and in an environmentally friendlier manner.

scholarly journals Coal Mine Methane Utilization in Gas Turbine Units for Electricity and Heat Production

2015 ◽  
Vol 4 (5) ◽  
pp. 41-48 ◽  
Author(s):  
Кулаков ◽  
D. Kulakov ◽  
Щёголев ◽  
N. Shchegolev ◽  
Тумашев ◽  
...  
Keyword(s):  
Gas Turbine ◽  
Coal Mining ◽  
Coal Mine ◽  
Power Plants ◽  
Negative Impact ◽  
Inlet Temperature ◽  
Ecological Situation ◽  
Modern Approach ◽  
Coal Mine Methane ◽  
Wide Range

Coal mining is accompanied by the release of coal mine methane. Its emissions into the atmosphere within methane-air mixture have a negative impact on the ecological situation. The modern approach involves the use of methane-air-mixture for heat boilers or units to generate electricity. For the generation of heat and electrical energy the coal mine methane could be used in cogeneration gas turbine plants with an altered sequence of processes. Thermo — and gas dynamics studies were conducted in a wide range of parameters of gas turbine plants. For small power plants recommended are: 2.8 compression ratio, turbine inlet — 1173 K, gas cooler inlet temperature — 303 K, 0.8 regeneration ratio. In this case the electrical efficiency of gas turbine plant is 25–26% and even 63–64% if produced heat is counted. Cogeneration gas turbine plant with an altered sequence of process has smaller capital and operating costs compared to traditional gas turbine unit. The use of methane-air mixture as fuel in such gas turbine units increases the profitability of coal mining and improves the ecological situation in the region.

scholarly journals A Small Scale Biomass Fueled Gas Turbine Engine

1998 ◽  
Author(s):  
Joe D. Craig ◽  
Carol R. Purvis
Keyword(s):  
Gas Turbine ◽  
Power Plants ◽  
Small Scale ◽  
Brayton Cycle ◽  
Prime Mover ◽  
Turbine Engine ◽  
Rice Hulls ◽  
Turbine Component ◽  
The Cost ◽  
New Generation

A new generation of small scale (less than 20 MWe) biomass fueled, power plants are being developed based on a gas turbine (Brayton cycle) prime mover. These power plants are expected to increase the efficiency and lower the cost of generating power from fuels such as wood. The new power plants are also expected to economically utilize annual plant growth materials (such as rice hulls, cotton gin trash, nut shells, and various straws, grasses, and animal manures) that are not normally considered as fuel for power plants. This paper summarizes the new power generation concept with emphasis on the engineering challenges presented by the gas turbine component.

Advanced Control for Clusters of SOFC/Gas Turbine Hybrid Systems

2018 ◽  
Vol 140 (5) ◽  
Author(s):  
Iacopo Rossi ◽  
Valentina Zaccaria ◽  
Alberto Traverso
Keyword(s):  
Fuel Cell ◽  
Power Systems ◽  
Gas Turbine ◽  
Power Plants ◽  
Numerical Approach ◽  
Computational Time ◽  
Target System ◽  
Wide Range ◽  
Advanced Control ◽  
Complex Target

The use of model predictive control (MPC) in advanced power systems can be advantageous in controlling highly coupled variables and optimizing system operations. Solid oxide fuel cell/gas turbine (SOFC/GT) hybrids are an example where advanced control techniques can be effectively applied. For example, to manage load distribution among several identical generation units characterized by different temperature distributions due to different degradation paths of the fuel cell stacks. When implementing an MPC, a critical aspect is the trade-off between model accuracy and simplicity, the latter related to a fast computational time. In this work, a hybrid physical and numerical approach was used to reduce the number of states necessary to describe such complex target system. The reduced number of states in the model and the simple framework allow real-time performance and potential extension to a wide range of power plants for industrial application, at the expense of accuracy losses, discussed in the paper.

Dual Brayton Cycle Gas Turbine Pressurized Fluidized Bed Combustion Power Plant Concept

1997 ◽  
Author(s):  
Xing L. Yan ◽  
Lawrence M. Lidsky
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
Power Plants ◽  
Environmental Benefits ◽  
Brayton Cycle ◽  
Plant Design ◽  
Fluidized Bed Combustion ◽  
Electric Power Plants ◽  
Wide Range ◽  
Pressurized Fluidized Bed Combustion

High generating efficiency has compelling economic and environmental benefits for electric power plants. There are particular incentives to develop more efficient and cleaner coal-fired power plants, to permit use of the world’s most abundant and secure energy source. This paper presents a newly-conceived power plant design, the Dual Brayton Cycle Gas Turbine PFBC, that yields 45% net generating efficiency and fires on a wide range of fuels with minimum pollution, of which coal is a particularly intriguing target for its first application. The DBC-GT design allows power plants based on the state-of-the-art PFBC technology to achieve substantially higher generating efficiencies while simultaneously providing modern gas turbine and related heat exchanger technologies access to the large coal power generation market.

Dual Brayton Cycle Gas Turbine Pressurized Fluidized Bed Combustion Power Plant Concept

1998 ◽  
Vol 120 (3) ◽  
pp. 566-572 ◽  
Author(s):  
X. L. Yan ◽  
L. M. Lidsky
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
Power Plants ◽  
Environmental Benefits ◽  
Brayton Cycle ◽  
Plant Design ◽  
Fluidized Bed Combustion ◽  
Electric Power Plants ◽  
Wide Range ◽  
Pressurized Fluidized Bed Combustion

High generating efficiency has compelling economic and environmental benefits for electric power plants. There are particular incentives to develop more efficient and cleaner coal-fired power plants in order to permit use of the world’s most abundant and secure energy source. This paper presents a newly conceived power plant design, the Dual Brayton Cycle Gas Turbine PFBC, that yields 45 percent net generating efficiency and fires on a wide range of fuels with minimum pollution, of which coal is a particularly intriguing target for its first application. The DBC-GT design allows power plants based on the state-of-the-art PFBC technology to achieve substantially higher generating efficiencies, while simultaneously providing modern gas turbine and related heat exchanger technologies access to the large coal power generation market.

scholarly journals Advanced Aeroderivative Gas Turbines in Coal-Based High Performance Power Systems (HIPPS)

1998 ◽  
Author(s):  
F. L. Robson ◽  
D. J. Seery
Keyword(s):  
Power Systems ◽  
Gas Turbine ◽  
Gas Turbines ◽  
High Performance ◽  
Power Plants ◽  
Performance Standards ◽  
Combined Cycle ◽  
Advanced Technology ◽  
Early 21St Century ◽  
Near Term

The Department of Energy’s Federal Energy Technology Center (FETC) is sponsoring the Combustion 2000 Program aimed at introducing clean and more efficient advanced technology coal-based power systems in the early 21st century. As part of this program, the United Technologies Research Center has assembled a seven member team to identify and develop the technology for a High Performance Power Systems (HIPPS) that will provide in the near term, 47% efficiency (HHV), and meet emission goals only one-tenth of current New Source Performance Standards for coal-fired power plants. In addition, the team is identifying advanced technologies that could result in HIPPS with efficiencies approaching 55% (HHV). The HIPPS is a combined cycle that uses a coal-fired High Temperature Advanced Furnace (HITAF) to preheat compressor discharge air in both convective and radiant heaters. The heated air is then sent to the gas turbine where additional fuel, either natural gas or distillate, is burned to raise the temperature to the levels of modern gas turbines. Steam is raised in the HITAF and in a Heat Recovery Steam Generator for the steam bottoming cycle. With state-of-the-art frame type gas turbines, the efficiency goal of 47% is met in a system with more than two-thirds of the heat input furnished by coal. By using advanced aeroderivative engine technology, HIPPS in combined-cycle and Humid Air Turbine (HAT) cycle configurations could result in efficiencies of over 50% and could approach 55%. The following paper contains descriptions of the HIPPS concept including the HITAF and heat exchangers, and of the various gas turbine configurations. Projections of HIPPS performance, emissions including significant reduction in greenhouse gases are given. Application of HIPPS to repowering is discussed.

Sign in / Sign up

Export Citation Format

Share Document