Modeling Direct-Injection Gasoline HCCI Combustion Using Detailed Chemistry and CFD

2001 ◽  
Author(s):  
Song-Charng Kong ◽  
Rolf D. Reitz
Keyword(s):  
Turbulent Mixing ◽  
Direct Injection ◽  
Combustion Process ◽  
Reaction Rates ◽  
Injection Timing ◽  
Detailed Chemical Kinetics ◽  
Detailed Chemistry ◽  
Hcci Combustion ◽  
Wide Range ◽  
Hcci Engines

Abstract Detailed chemical kinetics was implemented into an engine CFD code to study the combustion process in Homogeneous Charge Compression Ignition (HCCI) engines. The CHEMKIN code was implemented into KIVA-3V such that the chemistry and flow solutions were coupled. Effects of turbulent mixing on the reaction rates were also considered. The model was validated using experimental data from a direct-injection Caterpillar engine operated in the HCCI mode using gasoline. The results show that good levels of agreement were obtained using the present KIVA/CHEMKIN model for a wide range of engine conditions including various injection timings, engine speeds, and loads. It was found that the effects of turbulent mixing on the reaction rates needed to be considered to correctly simulate the combustion phasing. It was also found that the presence of residual radicals could enhance the mixture reactivity and hence shorten the ignition delay time. The NOx emissions were found to increase as the injection timing was retarded, in agreement with experimental results.

Use of Detailed Chemical Kinetics to Study HCCI Engine Combustion With Consideration of Turbulent Mixing Effects

2002 ◽  
Vol 124 (3) ◽  
pp. 702-707 ◽  
Author(s):  
S.-C. Kong ◽  
R. D. Reitz
Keyword(s):  
Chemical Kinetics ◽  
Turbulent Mixing ◽  
Combustion Process ◽  
Reaction Rates ◽  
Detailed Chemical Kinetics ◽  
Wide Range ◽  
Hcci Engines ◽  
Heavy Duty Diesel ◽  
Flame Chemistry ◽  
Detailed Chemical

Detailed chemical kinetics was used in an engine CFD code to study the combustion process in HCCI engines. The CHEMKIN code was implemented in KIVA such that the chemistry and flow solutions were coupled. The reaction mechanism consists of hundreds of reactions and species and is derived from fundamental flame chemistry. Effects of turbulent mixing on the reaction rates were also considered. The results show that the present KIVA/CHEMKIN model is able to simulate the ignition and combustion process in three different HCCI engines including a CFR engine and two modified heavy-duty diesel engines. Ignition timings were predicted correctly over a wide range of engine conditions without the need to adjust any kinetic constants. However, it was found that the use of chemical kinetics alone was not sufficient to accurately simulate the overall combustion rate. The effects of turbulent mixing on the reaction rates need to be considered to correctly simulate the combustion and heat release rates.

CFD Modelling of the Effects of Injection Timing on the Combustion Process and Emissions in an HSDI Diesel Engine

2012 ◽  
Author(s):  
Raouf Mobasheri ◽  
Zhijun Peng
Keyword(s):  
Diesel Engine ◽  
High Speed ◽  
Cfd Simulation ◽  
Direct Injection ◽  
Combustion Process ◽  
Injection Timing ◽  
Cfd Modelling ◽  
Combustion Modeling ◽  
Pressure Trace ◽  
Hsdi Diesel Engine

High-Speed Direct Injection (HSDI) diesel engines are increasingly used in automotive applications due to superior fuel economy. An advanced CFD simulation has been carried out to analyze the effect of injection timing on combustion process and emission characteristics in a four valves 2.0L Ford diesel engine. The calculation was performed from intake valve closing (IVC) to exhaust valve opening (EVO) at constant speed of 1600 rpm. Since the work was concentrated on the spray injection, mixture formation and combustion process, only a 60° sector mesh was employed for the calculations. For combustion modeling, an improved version of the Coherent Flame Model (ECFM-3Z) has been applied accompanied with advanced models for emission modeling. The results of simulation were compared against experimental data. Good agreement of calculated and measured in-cylinder pressure trace and pollutant formation trends were observed for all investigated operating points. In addition, the results showed that the current CFD model can be applied as a beneficial tool for analyzing the parameters of the diesel combustion under HSDI operating condition.

Effect of Fuel Injection Timing Relative to Ignition Timing on the Natural-Gas Direct-Injection Combustion

2001 ◽  
Author(s):  
Zuohua Huang ◽  
Seiichi Shiga ◽  
Takamasa Ueda ◽  
Nobuhisa Jingu ◽  
Hisao Nakamura ◽  
...  
Keyword(s):  
Heat Release ◽  
Late Stage ◽  
Equivalence Ratio ◽  
Fuel Injection ◽  
Direct Injection ◽  
Injection Timing ◽  
Ignition Timing ◽  
Fuel Injection Timing ◽  
Initial Stage ◽  
Wide Range

Abstract Effect of fuel injection timing relative to ignition timing on natural gas direct-injection combustion was studied by using a rapid compression machine. The ignition timing was fixed at 80 ms from the compression start. When the injection timing was relatively earlier (injection start at 60 ms), the heat release pattern showed slower burn in the initial stage and faster burn in the late stage, which is similar to that of flame propagation of a premixed gas. In contrast to this, when the injection timing was relatively later (injection start at 75 ms), the heat release rate showed faster burn in the initial stage and slower burn in the late stage, which is similar to that of diesel combustion. The shortest duration was realized at the injection end timing of 80 ms (the same timing as the ignition timing) over the wide range of equivalence ratio. The degree of charge stratification and the intensity of turbulence generated by the fuel jet is considered to cause these behaviors. Earlier injection leads to longer duration of the initial combustion, whereas the later injection does longer duration of the late combustion. Earlier injection showed relatively lower CO emission while later injection produces relatively lower NOx emission. It was suggested that earlier injection leads to lower mixture stratification combustion and later injection leads to higher mixture stratification combustion. Combustion efficiency maintained high value over the wide range of equivalence ratio.

scholarly journals Experimental study of multiple pilot injection strategy in an automotive direct injection diesel engine

2018 ◽  
Vol 234 ◽  
pp. 03007
Author(s):  
Plamen Punov ◽  
Tsvetomir Gechev ◽  
Svetoslav Mihalkov ◽  
Pierre Podevin ◽  
Dalibor Barta
Keyword(s):  
Experimental Study ◽  
Diesel Engine ◽  
Diesel Engines ◽  
Direct Injection ◽  
Combustion Process ◽  
Injection Timing ◽  
Pilot Injection ◽  
Injection Strategy ◽  
Direct Injection Diesel Engine ◽  
Rate Of Heat Release

The pilot injection strategy is a widely used approach for reducing the noise of the combustion process in direct injection diesel engines. In the last generation of automotive diesel engines up to several pilot injections could occur to better control the rate of heat release (ROHR) in the cylinder as well as the pollutant formation. However, determination of the timing and duration for each pilot injection needs to be precisely optimised. In this paper an experimental study of the pilot injection strategy was conducted on a direct injection diesel engine. Single and double pilot injection strategy was studied. The engine rated power is 100 kW at 4000 rpm while the rated torque is 320 Nm at 2000 rpm. An engine operating point determined by the rotation speed of 1400 rpm and torque of 100 Nm was chosen. The pilot and pre-injection timing was widely varied in order to study the influence on the combustion process as well as on the fuel consumption.

Effect of Fuel Injection Timing During Negative Valve Overlap Period on a GDI-HCCI Engine

2018 ◽  
Author(s):  
Sok Ratnak ◽  
Jin Kusaka ◽  
Yasuhiro Daisho ◽  
Kei Yoshimura ◽  
Kenjiro Nakama
Keyword(s):  
Fuel Injection ◽  
Direct Injection ◽  
Single Pulse ◽  
Injection Timing ◽  
Pulse Injection ◽  
Hcci Combustion ◽  
Fuel Injection Timing ◽  
Intake Stroke ◽  
Negative Valve Overlap ◽  
Valve Overlap

Gasoline Direct Injection Homogeneous Charge Compression (GDI-HCCI) combustion is achieved by closing early the exhaust valves for trapping hot residual gases combined with direct fuel injection. The combustion is chemically controlled by multi-point auto-ignition which its main combustion phase can be controlled by direct injection timing of fuel. This work investigates the effect of single pulse injection timing on a supercharged GDI-HCCI combustion engine by using a four-stroke single cylinder engine with a side-mounted direct fuel injector. Injection of primary reference fuel PRF90 under the near-stoichiometric-boosted condition is studied. The fuel is injected during negative valve overlap (NVO) or recompression period for fuel reformation under low oxygen concentration and the injection is retarded to intake stroke for the homogeneous mixture. It is found that the early fuel injection in NVO period advances the combustion phasing compared with the retarded injection in the intake stroke. Noticeable slower combustion rate from intake stroke fuel injection is obtained compared with the NVO injection due to charge cooling effect. Zero-dimensional combustion simulations with multiple chemical reaction mechanisms are simulated to provide chemical understanding from the effect of fuel injection timing on intermediate species generations. The species such as C2H4, C3H6, CH4, and H2 are found to be formed during the NVO injection period from the calculations. The effects of single pulse injection timings on combustion characteristics such pressure rise rate, combustion stability, and emissions are also discussed in this study.

Experimental and Theoretical Optimization of Combustion Chamber and Fuel Distribution for the Low Emission Direct-Injection Diesel Engine

2002 ◽  
Vol 125 (1) ◽  
pp. 351-357 ◽  
Author(s):  
Y. Kidoguchi ◽  
M. Sanda ◽  
K. Miwa
Keyword(s):  
Diesel Engine ◽  
Combustion Chamber ◽  
Direct Injection ◽  
Combustion Process ◽  
Mixture Distribution ◽  
Initial Mixture ◽  
Injection Timing ◽  
Particulate Emissions ◽  
Particulate Emission ◽  
Direct Injection Diesel Engine

Effects of combustion chamber geometry and initial mixture distribution on the combustion process were investigated in a direct-injection diesel engine. In the engine experiment, a high squish combustion chamber with a squish lip could reduce both NOx and particulate emissions with retarded injection timing. According to the results of CFD computation and phenomenological modeling, the high squish combustion chamber with a central pip is effective to keep the combusting mixture under the squish lip until the end of combustion and the combustion region forms rich and highly turbulent atmosphere. This kind of mixture distribution tends to reduce initial burning, resulting in restraint of NOx emission while keeping low particulate emission.

Modeling the Effects of Variable Intake Valve Timing on Diesel HCCI Combustion at Varying Load, Speed, and Boost Pressures

2008 ◽  
Vol 130 (5) ◽  
Author(s):  
C. L. Genzale ◽  
S.-C. Kong ◽  
R. D. Reitz
Keyword(s):  
Operating Conditions ◽  
Effective Control ◽  
Intake Valve ◽  
Valve Timing ◽  
Detailed Chemical Kinetics ◽  
Hcci Combustion ◽  
Wide Range ◽  
Particulate Matter Emissions ◽  
Charge Mixture ◽  
Ignition And Combustion

Homogeneous charge compression ignition (HCCI) operated engines have the potential to provide the efficiency of a typical diesel engine, with very low NOx and particulate matter emissions. However, one of the main challenges with this type of operation in diesel engines is that it can be difficult to control the combustion phasing, especially at high loads. In diesel HCCI engines, the premixed fuel-air charge tends to ignite well before top dead center, especially as load is increased, and a method of delaying the ignition is necessary. The development of variable valve timing (VVT) technology may offer an important advantage in the ability to control diesel HCCI combustion. VVT technology can allow for late intake valve closure (IVC) times, effectively changing the compression ratio of the engine. This can decrease compression temperatures and delay ignition, thus allowing the possibility to employ HCCI operation at higher loads. Furthermore, fully flexible valve trains may offer the potential for dynamic combustion phasing control over a wide range of operating conditions. A multidimensional computational fluid dynamics model is used to evaluate combustion event phasing as both IVC times and operating conditions are varied. The use of detailed chemical kinetics, based on a reduced n-heptane mechanism, provides ignition and combustion predictions and includes low-temperature chemistry. The use of IVC delay is demonstrated to offer effective control of diesel HCCI combustion phasing over varying loads, engine speeds, and boost pressures. Additionally, as fueling levels are increased, charge mixture properties are observed to have a significant effect on combustion phasing. While increased fueling rates are generally seen to advance combustion phasing, the reduction of specific heat ratio in higher equivalence ratio mixtures can also cause noticeably slower temperature rise rates, affecting ignition timing and combustion phasing. Variable intake valve timing may offer a promising and flexible control mechanism for the phasing of diesel HCCI combustion. Over a large range of boost pressures, loads, and engine speeds, the use of delayed IVC is shown to sufficiently delay combustion in order to obtain optimal combustion phasing and increased work output, thus pointing towards the possibility of expanding the current HCCI operating range into higher load points.

Numerical Simulation of Direct Injection Engine With Using Porous Medium

2012 ◽  
Author(s):  
Arash Mohammadi ◽  
Ali Jazayeri ◽  
Masoud Ziabasharhagh
Keyword(s):  
Porous Medium ◽  
Direct Injection ◽  
Combustion Process ◽  
Packed Bed ◽  
Published Data ◽  
Mixture Formation ◽  
Flammability Limits ◽  
Ic Engine ◽  
Engine Simulation ◽  
Wide Range

Porous media (PM) has interesting advantages in compared with free flame combustion due to the higher burning rates, the increased power range, the extension of the lean flammability limits, and the low emissions of pollutants. Future clean internal combustion (IC) engines should have had minimum emissions level (for both gaseous and particulate matter) under possible lowest fuel consumption permitted in a wide range of speed, loads and having good transient response. These parameters strongly depend on mixture formation and combustion processes which are difficult to be controlled in a conventional engine. This may be achieved by realization of homogeneous combustion process in engine. This paper deals with the simulation of direct injection IC engine equipped with a chemically inert PM, with cylindrical geometry to homogenize and stabilize the combustion of engine. A 3D numerical model for PM engine is presented in this study based on a modified version of the KIVA-3V code. Due to lack of any published data for PM engines, numerical results of thermal and combustion wave propagation in a porous medium are compared with experimental data of lean methane-air mixture under filtration in packed bed and very good agreement is seen. For PM engine simulation methane as a fuel is injected directly inside hot PM that is assumed, mounted in cylinder head. Lean mixture is formed and volumetric combustion occurs in PM and in-cylinder. Mixture formation, pressure and temperature distribution in both phases of PM and in-cylinder fluid with the production of pollutants CO and NO and also effects of injection time in the closed part of the cycle are studied.

Understanding Loss Mechanisms and Identifying Areas of Improvement for HCCI Engines Using Detailed Exergy Analysis

2012 ◽  
Author(s):  
Samveg Saxena ◽  
Iván Dario Bedoya ◽  
Nihar Shah ◽  
Amol Phadke
Keyword(s):  
Exergy Analysis ◽  
Combustion Process ◽  
Operating Conditions ◽  
Operating Efficiency ◽  
Relative Importance ◽  
Detailed Chemical Kinetics ◽  
Loss Mechanism ◽  
Hcci Engines ◽  
Intake Pressure ◽  
Loss Mechanisms

This paper presents a detailed exergy analysis of homogeneous charge compression ignition (HCCI) engines, including a crank-angle resolved breakdown of mixture exergy and exergy destruction. Exergy analysis is applied to a multi-zone HCCI simulation including detailed chemical kinetics. The HCCI simulation is validated against engine experiments for ethanol-fueled operation. The exergy analysis quantifies the relative importance of different loss mechanisms within HCCI engines over a range of engine operating conditions. Specifically, four loss mechanisms are studied for their relative impact on exergy losses, including 1) the irreversible combustion process (16.4–21.5%), 2) physical exergy lost to exhaust gases (12.0–18.7%), 3) heat losses (3.9–17.1%), and 4) chemical exergy lost to incomplete combustion (4.7–37.8%). The trends in each loss mechanism are studied in relation to changes in intake pressure, equivalence ratio, and engine speed as these parameters are directly used to vary engine power output. This exergy analysis methodology is proposed as a tool to inform research and design processes, particularly by identifying the relative importance of each loss mechanism in determining engine operating efficiency.

Sign in / Sign up

Export Citation Format

Share Document