Numerical Study of Vortex/Flame Interaction in Actively Forced Confined Non-Premixed Jets

1999 ◽  
Vol 122 (2) ◽  
pp. 376-380 ◽  
Author(s):  
K. R. Anderson ◽  
S. Mahalingam
Keyword(s):  
Numerical Simulations ◽  
Heat Release ◽  
Numerical Study ◽  
Fixed Level ◽  
Vorticity Production ◽  
Near Wall

Numerical simulations of coplanar reacting jets subjected to near wall confinement have been performed. The primary conclusion is that for a fixed level of heat release, the mechanism of baroclinic vorticity production increases with more severe wall confinement. [S0022-1481(00)00602-2]

Using Ansys for Design and Numerical Study of a Specific Fixed Wing UAV

2018 ◽  
Vol 55 (4) ◽  
pp. 652-657 ◽  
Author(s):  
Gabriel Murariu ◽  
Razvan Adrian Mahu ◽  
Adrian Gabriel Murariu ◽  
Mihai Daniel Dragu ◽  
Lucian P. Georgescu ◽  
...  
Keyword(s):  
Numerical Simulations ◽  
Unmanned Aerial Vehicle ◽  
Numerical Study ◽  
Flight Time ◽  
Cluster System ◽  
Numerical Results ◽  
Operational Performance ◽  
Gliding Flight ◽  
Aerial Vehicle ◽  
Constant Altitude

This article presents the design of a specific unmanned aerial vehicle UAV prototype own building. Our UAV is a flying wing type and is able to take off with a little boost. This system happily combines some major advantages taken from planes namely the ability to fly horizontal, at a constant altitude and of course, the great advantage of a long flight-time. The aerodynamic models presented in this paper are optimized to improve the operational performance of this aerial vehicle, especially in terms of stability and the possibility of a long gliding flight-time. Both aspects are very important for the increasing of the goals� efficiency and for the getting work jobs. The presented simulations were obtained using ANSYS 13 installed on our university� cluster system. In a next step the numerical results will be compared with those during experimental flights. This paper presents the main results obtained from numerical simulations and the obtained magnitudes of the main flight coefficients.

Direct numerical simulations of Rayleigh–Bénard convection in water with non-Oberbeck–Boussinesq effects

2019 ◽  
Vol 881 ◽  
pp. 1073-1096 ◽  
Author(s):  
Andreas D. Demou ◽  
Dimokratis G. E. Grigoriadis
Keyword(s):  
Numerical Simulations ◽  
Two Dimensions ◽  
Direct Numerical Simulations ◽  
Wall Region ◽  
Number Range ◽  
Bénard Convection ◽  
Benard Convection ◽  
Rayleigh Benard Convection ◽  
Rayleigh Benard ◽  
Near Wall

Rayleigh–Bénard convection in water is studied by means of direct numerical simulations, taking into account the variation of properties. The simulations considered a three-dimensional (3-D) cavity with a square cross-section and its two-dimensional (2-D) equivalent, covering a Rayleigh number range of $10^{6}\leqslant Ra\leqslant 10^{9}$ and using temperature differences up to 60 K. The main objectives of this study are (i) to investigate and report differences obtained by 2-D and 3-D simulations and (ii) to provide a first appreciation of the non-Oberbeck–Boussinesq (NOB) effects on the near-wall time-averaged and root-mean-squared (r.m.s.) temperature fields. The Nusselt number and the thermal boundary layer thickness exhibit the most pronounced differences when calculated in two dimensions and three dimensions, even though the $Ra$ scaling exponents are similar. These differences are closely related to the modification of the large-scale circulation pattern and become less pronounced when the NOB values are normalised with the respective Oberbeck–Boussinesq (OB) values. It is also demonstrated that NOB effects modify the near-wall temperature statistics, promoting the breaking of the top–bottom symmetry which characterises the OB approximation. The most prominent NOB effect in the near-wall region is the modification of the maximum r.m.s. values of temperature, which are found to increase at the top and decrease at the bottom of the cavity.

Vortex-Induced Vibrations of a Cylinder at Subcritical Reynolds Number

2011 ◽  
Author(s):  
Yoann Jus ◽  
Elisabeth Longatte ◽  
Jean-Camille Chassaing ◽  
Pierre Sagaut
Keyword(s):  
Reynolds Number ◽  
Numerical Simulations ◽  
Numerical Study ◽  
Damping Ratio ◽  
Experimental Studies ◽  
Cross Flow ◽  
Physical Analysis ◽  
Arbitrary Lagrangian Eulerian ◽  
Vortex Induced Vibrations ◽  
Low Mass

The present work focusses on the numerical study of Vortex-Induced Vibrations (VIV) of an elastically mounted cylinder in a cross flow at moderate Reynolds numbers. Low mass-damping experimental studies show that the dynamic behavior of the cylinder exhibits a three-branch response model, depending on the range of the reduced velocity. However, few numerical simulations deal with accurate computations of the VIV amplitudes at the lock-in upper branch of the bifurcation diagram. In this work, the dynamic response of the cylinder is investigated by means of three-dimensional Large Eddy Simulation (LES). An Arbitrary Lagrangian Eulerian framework is employed to account for fluid solid interface boundary motion and grid deformation. Numerous numerical simulations are performed at a Reynolds number of 3900 for both no damping and low-mass damping ratio and various reduced velocities. A detailed physical analysis is conducted to show how the present methodology is able to capture the different VIV responses.

Numerical Simulations of Turbulent Mixing and Autoignition of Hydrogen Fuel at Reheat Combustor Operating Conditions

2011 ◽  
Author(s):  
Elizaveta Ivanova ◽  
Berthold Noll ◽  
Peter Griebel ◽  
Manfred Aigner ◽  
Khawar Syed
Keyword(s):  
Natural Gas ◽  
Numerical Simulations ◽  
Flue Gas ◽  
Turbulent Mixing ◽  
Turbulence Modeling ◽  
Numerical Study ◽  
Operating Conditions ◽  
Fuel Blend ◽  
Flow Configuration ◽  
Modeling Methods

Turbulent mixing and autoignition of H2-rich fuels at relevant reheat combustor operating conditions are investigated in the present numerical study. The flow configuration under consideration is a fuel jet perpendicularly injected into a crossflow of hot flue gas (T > 1000K, p = 15bar). Based on the results of the experimental study for the same flow configuration and operating conditions two different fuel blends are chosen for the numerical simulations. The first fuel blend is a H2/natural gas/N2 mixture at which no autoignition events were observed in the experiments. The second fuel blend is a H2/N2 mixture at which autoignition in the mixing section occurred. First, the non-reacting flow simulations are performed for the H2/natural gas/N2 mixture in order to compare the accuracy of different turbulence modeling methods. Here the steady-state Reynolds-averaged Navier-Stokes (RANS) as well as the unsteady scale-adaptive simulation (SAS) turbulence modeling methods are applied. The velocity fields obtained in both simulations are directly validated against experimental data. The SAS method shows better agreement with the experimental results. In the second part of the present work the autoignition of the H2/N2 mixture is numerically studied using the 9-species 21-steps reaction mechanism of O’Conaire et al. [1]. As in the reference experiments, autoignition can be observed in the simulations. Influences of the turbulence modeling as well as of the hot flue gas temperature are investigated. The onset and the propagation of the ignition kernels are studied based on the SAS modeling results. The obtained numerical results are discussed and compared with data from experimental autoignition studies.

A Numerical Study of Heat Transfer and Flow Structure in Channels With Miniature V Rib-Dimple Hybrid Structure on One Wall

2018 ◽  
Author(s):  
Peng Zhang ◽  
Yu Rao ◽  
Yanlin Li
Keyword(s):  
Heat Transfer ◽  
Turbulent Flow ◽  
Numerical Simulations ◽  
Numerical Study ◽  
Reynolds Numbers ◽  
Hybrid Structure ◽  
Transfer Enhancement ◽  
Nusselt Numbers ◽  
Flow And Heat Transfer ◽  
Flow Mixing

This paper presents a numerical study on turbulent flow and heat transfer in the channels with a novel hybrid cooling structure with miniature V-shaped ribs and dimples on one wall. The heat transfer characteristics, pressure loss and turbulent flow structures in the channels with the rib-dimples with three different rib heights of 0.6 mm, 1.0 mm and 1.5 mm are obtained for the Reynolds numbers ranging from 18,700 to 60,000 by numerical simulations, which are also compared with counterpart of a pure dimpled and pure V ribbed channel. The results show that the overall Nusselt numbers of the V rib-dimple channel with the rib height of 1.5 mm is up to 70% higher than that of the channels with pure dimples. The numerical simulations show that the arrangement of the miniature V rib upstream each dimple induces complex secondary flow near the wall and generates downwashing vortices, which intensifies the flow mixing and turbulent kinetic energy in the dimple, resulting in significant improvement in heat transfer enhancement and uniformness.

scholarly journals Modelling of vertical nano-needles as sensing devices for neuronal signal recordings

2020 ◽  
Author(s):  
Federico Leva ◽  
Pierpaolo Palestri ◽  
Luca Selmi
Keyword(s):  
Transfer Function ◽  
Electrical Activity ◽  
Numerical Simulations ◽  
Thermal Noise ◽  
Numerical Study ◽  
Circuit Model ◽  
Si Nanowires ◽  
Lumped Element ◽  
Neuronal Signal ◽  
The Impact

A design-oriented numerical study of vertical Si-nanowires to be used as sensing elements for the detection of the intracellular electrical activity of neurons. An equivalent lumped-element circuit model is derived and validated by comparison with physics-based numerical simulations. Most of the component values can be identified individually by geometrical and physical considerations. The transfer function and the SNR of the sensor in presence of thermal noise are derived, and the impact of the device geometry is shown.

scholarly journals Modelling of vertical nano-needles as sensing devices for neuronal signal recordings

2021 ◽  
Author(s):  
Federico Leva ◽  
Pierpaolo Palestri ◽  
Luca Selmi
Keyword(s):  
Transfer Function ◽  
Electrical Activity ◽  
Numerical Simulations ◽  
Thermal Noise ◽  
Numerical Study ◽  
Circuit Model ◽  
Si Nanowires ◽  
Lumped Element ◽  
Neuronal Signal ◽  
The Impact

A design-oriented numerical study of vertical Si-nanowires to be used as sensing elements for the detection of the intracellular electrical activity of neurons. An equivalent lumped-element circuit model is derived and validated by comparison with physics-based numerical simulations. Most of the component values can be identified individually by geometrical and physical considerations. The transfer function and the SNR of the sensor in presence of thermal noise are derived, and the impact of the device geometry is shown.

scholarly journals Cardiac Spiral Wave Drifting Due to Spatial Temperature Gradients – a Numerical Study

2018 ◽  
Author(s):  
Guy Malki ◽  
Sharon Zlochiver
Keyword(s):  
Numerical Simulations ◽  
Single Cell ◽  
Numerical Study ◽  
Spiral Wave ◽  
Spiral Waves ◽  
Temperature Gradients ◽  
Effect Of Temperature ◽  
Local Perturbation ◽  
Marginal Effect ◽  
Spatial Temperature

ABSTRACTCardiac rotors are believed to be a major driver source of persistent atrial fibrillation (AF), and their spatiotemporal characterization is essential for successful ablation procedures. However, electrograms guided ablation have not been proven to have benefit over empirical ablation thus far, and there is a strong need of improving the localization of cardiac arrhythmogenic targets for ablation. A new approach for characterize rotors is proposed that is based on induced spatial temperature gradients (STGs), and investigated by theoretical study using numerical simulations. We hypothesize that such gradients will cause rotor drifting due to induced spatial heterogeneity in excitability, so that rotors could be driven towards the ablating probe. Numerical simulations were conducted in single cell and 2D atrial models using AF remodeled kinetics. STGs were applied either linearly on the entire tissue or as a small local perturbation, and the major ion channel rate constants were adjusted following Arrhenius equation. In the AF-remodeled single cell, recovery time increased exponentially with decreasing temperatures, despite the marginal effect of temperature on the action potential duration. In 2D models, spiral waves drifted with drifting velocity components affected by both temperature gradient direction and the spiral wave rotation direction. Overall, spiral waves drifted towards the colder tissue region associated with global minimum of excitability. A local perturbation with a temperature of T=28°C was found optimal for spiral wave attraction for the studied conditions. This work provides a preliminary proof-of-concept for a potential prospective technique for rotor attraction. We envision that the insights from this study will be utilize in the future in the design of a new methodology for AF characterization and termination during ablation procedures.

Numerical simulation of the Late Jurassic closure of the Vardar Tethys

2021 ◽  
Author(s):  
Nikola Stanković ◽  
Vesna Cvetkov ◽  
Vladica Cvetković
Keyword(s):  
Boundary Conditions ◽  
Numerical Simulations ◽  
Stokes Equations ◽  
Numerical Study ◽  
Phase Evolution ◽  
Staggered Grid ◽  
Second Phase ◽  
Weak Zone ◽  
Ongoing Research ◽  
Magmatic Complex

<p>We report updated results of our ongoing research on constraining geodynamic conditions associated with the final closure of the Vardar branch of the Tethys Ocean by means of application of numerical simulations (previous interim results reported in EGU2020-5919).</p><p>The aim of our numerical study is to test the hypothesis that a single eastward subduction in the Jurassic is a valid explanation for the occurrence of three major, presently observed geological entities that are left behind after the closure of the Vardar Tethys. These include: ophiolite-like igneous rocks of the Sava-Vardar zone and presumably subduction related Timok Magmatic Complex, both Late Cretaceous in age as well as Jurassic ophiolites obducted onto the Adriatic margin. In our simulations we initiate an intraoceanic subduction in the Early/Middle Jurassic, which eventually transitions into an oceanic closure and subsequent continental collision processes.</p><p>In the scope of our study numerical simulations are performed by solving a set of partial differential equations: the continuity equation, the Navier-Stokes equations and the temperature equation. To this end we used I2VIS thermo-mechanical code which utilizes marker in cell approach with finite difference discretization of equations on a staggered grid [Gerya et al., 2000; Gerya&Yuen, 2003].</p><p>The 2D model consists of two continental plates separated by two oceanic slabs connected at a mid-oceanic ridge. Intraoceanic subduction is initiated along the ridge by assigning a weak zone beneath the ridge. Time-dependent boundary conditions for velocity are imposed on the simulation in order to model a transient spreading period. The change of sign in plate velocities is found to be useful for both obtaining obduction / ophiolite emplacement [Duretz et al., 2016] and causing back-arc extension. Changes in velocities are linear in time. Simulations follow a three-phase evolution of velocity boundary conditions consisting of two convergent phases separated by a single divergent phase where spreading regime is dominant. Effect of duration and magnitude of the second phase on model evolution is also explored.</p><p>Our so far obtained simulations were able to reproduce the westward obduction and certain extension processes along the active (European) margin, which match the existing geological relationships. However, the simulations involve an unreasonably short geodynamic event (cca 15-20 My) and we are working on solving this problem with new simulations. </p>

Sign in / Sign up

Export Citation Format

Share Document