On the Performance of Hybrid Foil-Magnetic Bearings

1999 ◽  
Vol 122 (1) ◽  
pp. 73-81 ◽  
Author(s):  
H. Heshmat ◽  
H. Ming Chen ◽  
J. F. Walton,
Keyword(s):  
Carrying Capacity ◽  
High Speed ◽  
Magnetic Bearing ◽  
Journal Bearings ◽  
Load Carrying Capacity ◽  
Foil Bearings ◽  
Foil Bearing ◽  
Magnetic Elements ◽  
Load Carrying ◽  
Hybrid Bearing

Recent technological advancements make hybridization of the magnetic and foil bearings both possible and extremely attractive. Operation of the foil/magnetic bearing takes advantage of the strengths of each individual bearing while minimizing each other’s weaknesses. In this paper one possible hybrid foil and magnetic bearing arrangement is investigated and sample design and operating parameters are presented. One of the weaknesses of the foil bearings, like any hydrodynamic bearing, is that contact between the foil bearing and the shaft occurs at rest or at very low speeds and it has low load carrying capacity at low speeds. For high speed applications, AMBs are, however, vulnerable to rotor-bending or structural resonances that can easily saturate power amplifiers and make the control system unstable. Since the foil bearing is advantageous for high speed operation with a higher load carrying capacity, and the magnetic bearing is so in low speed range, it is a natural evolution to combine them into a hybrid bearing system thus utilizing the advantages of both. To take full advantage of the foil and magnetic elements comprising a hybrid bearing, it is imperative that the static and dynamic characteristics of each bearing be understood. This paper describes the development of a new analysis technique that was used to evaluate the performance of a class of gas-lubricated journal bearings. Unlike conventional approaches, the solution of the governing hydrodynamic equations dealing with compressible fluid is coupled with the structural resiliency of the bearing surfaces. The distribution of the fluid film thickness and pressures, as well as the shear stresses in a finite-width journal bearing, are computed. Using the Finite Element (FE) method, the membrane effect of an elastic top foil was evaluated and included in the overall analytical procedure. Influence coefficients were generated to address the elasticity effects of combined top foil and elastic foundation on the hydrodynamics of journal bearings, and were used to expedite the numerical solution. The overall program logic proved to be an efficient technique to deal with the complex structural compliance of various foil bearings. Parametric analysis was conducted to establish tabulated data for use in a hybrid foil/magnetic bearing design analysis. A load sharing control algorithm between the foil and magnetic elements is also discussed. [S0742-4795(00)01201-1]

scholarly journals On the Performance of Hybrid Foil-Magnetic Bearings

1998 ◽  
Author(s):  
Hooshang Heshmat ◽  
H. Ming Chen ◽  
James F. Walton
Keyword(s):  
Carrying Capacity ◽  
High Speed ◽  
Magnetic Bearing ◽  
Journal Bearings ◽  
Load Carrying Capacity ◽  
Foil Bearings ◽  
Foil Bearing ◽  
Magnetic Elements ◽  
Load Carrying ◽  
Hybrid Bearing

Recent technological advancements make hybridization of the magnetic and foil bearings both possible and extremely attractive. Operation of the foil/magnetic bearing takes advantage of the strengths of each individual bearing while minimizing each others weaknesses. In this paper one possible hybrid foil and magnetic bearing arrangement is investigated and sample design and operating parameters are presented. One of the weaknesses of the foil bearings, like any hydrodynamic bearing, is that contact between the foil bearing and the shaft occurs at rest or at very low speeds and it has low load carrying capacity at low speeds. For high speed applications, AMBs are, however, vulnerable to rotor-bending or structural resonances that can easily saturate power amplifiers and make the control system unstable. Since the foil bearing is advantageous for high speed operation with a higher load carrying capacity, and the magnetic bearing is so in low speed range, it is a natural evolution to combine them into a hybrid bearing system thus utilizing the advantages of both. To take full advantage of the foil and magnetic elements comprising a hybrid bearing, it is imperative that the static and dynamic characteristics of each bearing be understood. This paper describes the development of a new analysis technique that was used to evaluate the performance of a class of gas-lubricated journal bearings. Unlike conventional approaches, the solution of the governing hydrodynamic equations dealing with compressible fluid is coupled with the structural resiliency of the bearing surfaces. The distribution of the fluid film thickness and pressures, as well as the shear stresses in a finite-width journal bearing, are computed. Using the Finite Element (FE) method, the membrane effect of an elastic top foil was evaluated and included in the overall analytical procedure. Influence coefficients were generated to address the elasticity effects of combined top foil and elastic foundation on the hydrodynamics of journal bearings, and were used to expedite the numerical solution. The overall program logic proved to be an efficient technique to deal with the complex structural compliance of various foil bearings. Parametric analysis was conducted to establish tabulated data for use in a hybrid foil/magnetic bearing design analysis. A load sharing control algorithm between the foil and magnetic elements is also discussed.

Influence of geometric parameters on the bump foil bearing performance

2019 ◽  
Vol 234 (7) ◽  
pp. 1017-1026
Author(s):  
Sadanand Kulkarni ◽  
Soumendu Jana
Keyword(s):  
Carrying Capacity ◽  
High Speed ◽  
System Development ◽  
Load Capacity ◽  
Radial Clearance ◽  
Load Carrying Capacity ◽  
Foil Bearings ◽  
Foil Bearing ◽  
Load Carrying ◽  
Lift Off

High-speed rotating system development has drawn considerable attention of the researchers, in the recent past. Foil bearings are one of the major contenders for such applications, particularly for high speed and low load rotating systems. In foil bearings, process fluid or air is used as the working medium and no additional lubricant is required. It is known from the published literature that the load capacity of foil bearings depend on the operating speed, viscosity of the medium, clearance, and stiffness of the foil apart from the geometric dimensions of the bearing. In case of foil bearing with given dimensions, clearance governs the magnitude of pressure developed, whereas stiffness dictates the change in radial clearance under the generated pressure. This article deals with the effect of stiffness, clearance, and its interaction on the bump foil bearings load-carrying capacity. For this study, four sets of foil bearings of the same geometry with two levels of stiffness and clearance values are fabricated. Experiments are carried out following two factor-two level factorial design approach under constant load and in each case, the lift-off speed is measured. The experimental output is analyzed using statistical techniques to evaluate the influence of parameters under consideration. The results indicate that clearance has the maximum influence on the lift-off speed/ load-carrying capacity, followed by interaction effect and stiffness. A regression model is developed based on the experimental values and model is validated using error analysis technique.

scholarly journals Analysis on Active Hydromagnetic Journal Bearing using Ansys

2021 ◽  
Vol 9 (VI) ◽  
pp. 2395-2400
Author(s):  
Yuvaraj Ballal
Keyword(s):  
Carrying Capacity ◽  
High Speed ◽  
Journal Bearing ◽  
Magnetic Bearing ◽  
High Load ◽  
Active Magnetic Bearing ◽  
Load Carrying Capacity ◽  
Hydrodynamic Bearing ◽  
Load Carrying ◽  
Hydrodynamic Journal Bearing

In this study Active hydromagnetic journal bearing is designed and analysed by using ANSYS tool. Active Hydromagnetic journal bearing is a combination of Hydrodynamic journal bearing & Active magnetic bearing. We know that hydrodynamic journal bearing used to low speed and high load carrying capacity & its drawback is at high-speed shaft surface is come in contact and there wear also happen. In this condition hydrodynamic bearing also damages from contaminants as dirt or ash, also in the rise in temperature. In the active magnetic bearing is used to high speed and low load carrying capacity. When increasing load carrying capacity of active hydromagnetic bearing, it also increases design of active hydromagnetic bearing. When combining Hydrodynamic journal bearing & Active magnetic bearing it reduces drawback of both bearing. It working on high speed and high load carrying capacity. When combining both bearing considering main parameter is clearance in hydrodynamic journal bearing & Air gap in active magnetic bearing.

The Granular Lubricated Journal Bearing: Evidence of Lift Formation

2019 ◽  
Vol 141 (4) ◽  
Author(s):  
Venkata K. Jasti ◽  
Martin C. Marinack ◽  
Deepak Patil ◽  
C. Fred Higgs
Keyword(s):  
Carrying Capacity ◽  
Granular Flow ◽  
High Speed ◽  
Journal Bearing ◽  
Hydrodynamic Lubrication ◽  
Flow Behavior ◽  
Extreme Environments ◽  
Granular Flows ◽  
Load Carrying Capacity ◽  
Load Carrying

This work demonstrates that granular flows (i.e., macroscale, noncohesive spheres) entrained into an eccentrically converging gap can indeed actually exhibit lubrication behavior as prior models postulated. The physics of hydrodynamic lubrication is quite well understood and liquid lubricants perform well for conventional applications. Unfortunately, in certain cases such as high-speed and high-temperature environments, liquid lubricants break down making it impossible to establish a stable liquid film. Therefore, it has been previously proposed that granular media in sliding convergent interfaces can generate load carrying capacity, and thus, granular flow lubrication. It is a possible alternative lubrication mechanism that researchers have been exploring for extreme environments, or wheel-regolith traction, or for elucidating the spreadability of additive manufacturing materials. While the load carrying capacity of granular flows has been previously demonstrated, this work attempts to more directly uncover the hydrodynamic-like granular flow behavior in an experimental journal bearing configuration. An enlarged granular lubricated journal bearing (GLJB) setup has been developed and demonstrated. The setup was made transparent in order to visualize and video capture the granular collision activity at high resolution. In addition, a computational image processing program has been developed to process the resulting images and to noninvasively track the “lift” generated by granular flow during the journal bearing operation. The results of the lift caused by granular flow as a function of journal rotation rate are presented as well.

Vibration Mitigation of Rotors Suspended on Low-Cost Hybrid Gas Foil Bearing

2019 ◽  
Author(s):  
Kamal Kumar Basumatary ◽  
Karuna Kalita ◽  
Sashindra K. Kakoty ◽  
Seamus D. Garvey
Keyword(s):  
High Speed ◽  
Low Cost ◽  
Current Source ◽  
Magnetic Bearing ◽  
Active Magnetic Bearing ◽  
Electromagnetic Actuators ◽  
Manufacturing Method ◽  
Foil Bearings ◽  
Foil Bearing ◽  
Small Series

Abstract The hybrid Gas Foil Bearings combining the Gas Foil Bearing and Active Magnetic Bearing is a possibility for application in high-speed turbomachinery and a few developments have been made in this context. As such, the cost of conventional Gas Foil Bearing increases due to its requirement of precise manufacturing method and the coating material for the top foil and bump foil. In case of Active Magnetic Bearing, the normal electrical arrangement includes a multiplicity of independently controlled current sources usually at least four drives per bearing which increases its cost. Therefore, the hybrid Gas Foil Bearing will have much higher cost. In this work, a new electrical arrangement for the electromagnetic actuators of the hybrid Gas Foil Bearing has been proposed. The new arrangement requires only two drives per bearing and the bias current has been provided (in the same set of windings) through a simple rectifier with small series choke and shunt capacitor. As the number of drives required is less, the proposed bearing will have low cost. Implementing the new approach, the force vectors are achieved using only two current-source drives whereas the usual conventional arrangement requires four such drives. Numerical simulations are performed to explore the capabilities of the low cost bearing.

Performance of a Foil-Magnetic Hybrid Bearing

2000 ◽  
Author(s):  
Erik E. Swanson ◽  
Hooshang Heshmat ◽  
James Walton
Keyword(s):  
High Speed ◽  
Load Capacity ◽  
Magnetic Bearing ◽  
Experimental Program ◽  
Turbine Engine ◽  
Foil Bearing ◽  
Speed Performance ◽  
Hybrid Bearing ◽  
High Load Capacity ◽  
Bearing System

To meet the advanced bearing needs of modern turbomachinery, a hybrid foil-magnetic hybrid bearing system was designed, fabricated and tested in a test rig designed to simulate the rotor dynamics of a small gas turbine engine (31 kN to 53 kN thrust class). This oil-free bearing system combines the excellent low and zero-speed capabilities of the magnetic bearing with the high load capacity and high speed performance of the compliant foil bearing. An experimental program is described which documents the capabilities of the bearing system for sharing load during operation at up to 30,000 RPM and the foil bearing component’s ability to function as a back-up in case of magnetic bearing failure. At an operating speed of 22,000 RPM, loads exceeding 5300 N were carried by the system. This load sharing could be manipulated by an especially designed electronic control algorithm. In all tests, rotor excursions were small and stable. During deliberately staged magnetic bearing malfunctions, the foil bearing proved capable of supporting the rotor during continued operation at full load and speed, as well as allowing a safe rotor coast-down. The hybrid system tripled the load capacity of the magnetic bearing alone and can offer a significant reduction in total bearing weight compared to a comparable magnetic bearing.

Overall Characteristics of Bearings Lubricated With Ferrofluids

1983 ◽  
Vol 105 (3) ◽  
pp. 466-475 ◽  
Author(s):  
N. Tipei
Keyword(s):  
Boundary Conditions ◽  
Carrying Capacity ◽  
Magnetic Particle ◽  
Journal Bearings ◽  
Load Carrying Capacity ◽  
Pressure Center ◽  
Friction Forces ◽  
Flow Rates ◽  
Load Carrying ◽  
Side Flow

Using the results shown in some previous papers, the overall characteristics of bearings lubricated with ferrofluids are calculated. First, the load carrying capacity of infinitely long sliding and journal bearings is considered. The pressure center and the attitude angle are also determined. Then, similar characteristics of finite bearings are obtained. In both cases, the new boundary conditions and the actual film extent under magnetic stresses are taken into account. It is shown that friction forces are mainly affected by the change in viscosity due to magnetic particle suspensions, while magnetic stresses modify friction only under special conditions which usually are not met in lubrication. In addition, the flow rates and the side flow coefficients are calculated. It is shown that the lubricant leakage can be reduced and even avoided when proper measures are taken. For short bearings, diagrams are given for the film extent, the film boundaries, the load carrying capacity, and the attitude of the journal center.

Sign in / Sign up

Export Citation Format

Share Document