Disturbance Observer Based Tracking Control

1997 ◽  
Vol 122 (2) ◽  
pp. 332-335 ◽  
Author(s):  
Chia-Shang Liu ◽  
Huei Peng

A disturbance observer based tracking control algorithm is presented in this paper. The key idea of the proposed method is that the plant nonlinearities and parameter variations can be lumped into a disturbance term. The lumped disturbance signal is estimated based on a plant dynamic observer. A state observer then corrects the disturbance estimation in a two-step design. First, a Lyapunov-based feedback estimation law is used. The estimation is then improved by using a feedforward correction term. The control of a telescopic robot arm is used as an example system for the proposed algorithm. Simulation results comparing the proposed algorithm against a standard adaptive control scheme and a sliding mode control algorithm show that the proposed scheme achieves superior performance, especially when large external disturbances are present. [S0022-0434(00)00802-9]

Complexity ◽  
2019 ◽  
Vol 2019 ◽  
pp. 1-14 ◽  
Author(s):  
Hongbin Wang ◽  
Bo Su ◽  
Yueling Wang ◽  
Jing Gao

Aiming at the problem of fixed-time trajectory tracking control for high-order dynamic systems with external time-varying disturbance and input dead-zone, an adaptive fixed-time sliding mode control algorithm is proposed by employing a fixed-time sliding mode disturbance observer (FTSMDO) and high-order fixed-time sliding mode algorithm. Firstly, a FTSMDO is presented for the problem that estimating the compound disturbance is composed of input dead-zone and time-varying external disturbance in the higher-order dynamic system, which cannot be measured accurately. Furthermore, for the case that the total disturbance of the system has an unknown upper bound, the corresponding adaptive law is designed to estimate the unknown upper bound, and the fixed-time controller is designed based on FTSMDO algorithm to make all state variables converge in a fixed-time. Based on Lyapunov technique, the fixed-time convergence performance of the proposed algorithm is proved. The effectiveness of the presented fixed-time control algorithm is verified by simulating the depth tracking control of the underactuated underwater vehicle.


Author(s):  
Jun Zhou ◽  
Jing Chang ◽  
Zongyi Guo

The paper describes the design of a fault-tolerant control scheme for an uncertain model of a hypersonic reentry vehicle subject to actuator faults. In order to improve superior transient performances for state tracking, the proposed method relies on a back-stepping sliding mode controller combined with an adaptive disturbance observer and a reference vector generator. This structure allows for a faster response and reduces the overshoots compared to linear conventional disturbance observers based sliding mode controller. Robust stability and performance guarantees of the overall closed-loop system are obtained using Lyapunov theory. Finally, numerical simulations results illustrate the effectiveness of the proposed technique.


2021 ◽  
Vol 01 (01) ◽  
pp. 2150001
Author(s):  
Jianye Gong ◽  
Yajie Ma ◽  
Bin Jiang ◽  
Zehui Mao

In this paper, the adaptive fault-tolerant formation tracking control problem for a set of heterogeneous unmanned aerial vehicle (UAV) and unmanned ground vehicle (UGV) systems with actuator loss of effectiveness faults is investigated. The cooperative fault-tolerant formation control strategy for UAV and UGV collaborative systems is classified into the altitude consensus control scheme for follower UAVs and the position cooperative formation control scheme for all followers. The altitude consensus control algorithm is designed by utilizing backstepping control technique to drive all UAVs to a desired predefined height. Then, based on synchronization formation error information, the position cooperative formation control algorithm is proposed for all followers to reach the expected position and perform the desired formation configuration. The adaptive fault estimation term is adopted in the designed fault-tolerant formation control algorithm to compensate for the actuator loss of effectiveness fault. Finally, a simulation example is proposed to reveal the validity of the designed cooperative formation tracking control scheme.


Author(s):  
Lörinc Márton ◽  
◽  
Béla Lantos ◽  

The paper deals with robust motion control of robotic systems with unknown friction parameters and payload mass. The parameters of the robot arm were considered known with a given precision. To solve the control of the robot with unknown payload mass and friction parameters, sliding mode control algorithm was proposed combined with robust parameter adaptation techniques. Using Lyapunov method it was shown that the resulting controller achieves a guaranteed final tracking accuracy. Simulation results are presented to illustrate the effectiveness and achievable control performance of the proposed scheme.


2014 ◽  
Vol 711 ◽  
pp. 297-302
Author(s):  
Xiao Feng Liu ◽  
Hong Zhang ◽  
He Qiao

Aiming at uncertainty and disturbance of the excitation system, we designed a kind of precise sliding mode controller with nonlinear disturbance observer that realized disturbance estimation and compensation. In order to obtain better convergence rates, based on the basis of fast terminal sliding mode surface, terminal piecewise sliding mode is adopted. Using the single machine infinite system, we have carried on the static and transient simulation. Simulation results show that control strategy adopted can guarantee system robustness to disturbance and has high control precision


2021 ◽  
Vol 37 (5) ◽  
pp. 891-899
Author(s):  
Bingli Zhang ◽  
Jin Cheng ◽  
Pingping Zheng ◽  
Aojia Li ◽  
Xiaoyu Cheng

HighlightsAutomatic navigation technology in autonomous tractors is one of the key technologies in precision agriculture.A path-tracking control algorithm based on lateral deviation and yaw rate feedback is proposed.The modified steering angle was obtained by comparing the ideal yaw rate with the actual yaw rate.The results demonstrate the efficiency and superior accuracy of the proposed algorithm for tractor path-tracking control.Abstract. The performance of path-tracking control systems for autonomous tractors affects the quality and efficiency of farmland operations. The objective of this study was to develop a path-tracking control algorithm based on lateral deviation and yaw rate feedback. The autonomous tractor path lateral dynamics model was developed based on preview theory and a two-degree-of-freedom tractor model. According to the established dynamic model, a path-tracking control algorithm using yaw angular velocity correction was designed, and the ideal steering angle was obtained by lateral deviation and sliding mode control. The modified steering angle was obtained by a proportional-integral-derivative feedback controller after comparing the ideal yaw rate with the actual yaw rate, which was then combined with the ideal steering angle to obtain the desired steering angle. The simulation and experimental results demonstrate the efficiency and superior accuracy of the proposed tractor path-tracking control algorithm, enabling its application in automatic navigation control systems for autonomous tractors. Keywords: Autonomous tractor, Path-tracking control, Sliding mode control, Yaw rate feedback.


Sign in / Sign up

Export Citation Format

Share Document