A Finite Element Method for Mechanical Response of Hair Cell Ciliary Bundles

1999 ◽  
Vol 122 (1) ◽  
pp. 44-50 ◽  
Author(s):  
John R. Cotton ◽  
J. Wallace Grant
Keyword(s):  
Finite Element Method ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Hair Cell ◽  
Mechanical Response ◽  
Mechanical Analysis ◽  
Element Analysis ◽  
Shear Deformable ◽  
Element Method

This paper describes the development of a methodology for performing a mechanical analysis of hair cell ciliary bundles. The cilia were modeled as shear deformable beams, and interconnections were modeled as two-force members. These models were incorporated into software, which performs a finite element analysis of a user-defined bundle. The algorithm incorporates aspects of the bundle such as geometric realignment and buckling of compressed side links. A sample bundle is introduced and results of modeling it are presented. [S0148-0731(00)00801-3]

Tire Cornering Simulation Using an Explicit Finite Element Analysis Code

1998 ◽  
Vol 26 (2) ◽  
pp. 109-119 ◽  
Author(s):  
M. Koishi ◽  
K. Kabe ◽  
M. Shiratori
Keyword(s):  
Finite Element Method ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Test System ◽  
Experimental Results ◽  
The Finite Element Method ◽  
Element Analysis ◽  
Explicit Finite Element ◽  
Explicit Finite Element Analysis ◽  
Element Method

Abstract The finite element method has been used widely in tire engineering. Most tire simulations using the finite element method are static analyses, because tires are very complex nonlinear structures. Recently, transient phenomena have been studied with explicit finite element analysis codes. In this paper, the authors demonstrate the feasibility of tire cornering simulation using an explicit finite element code, PAM-SHOCK. First, we propose the cornering simulation using the explicit finite element analysis code. To demonstrate the efficiency of the proposed simulation, computed cornering forces for a 175SR14 tire are compared with experimental results from an MTS Flat-Trac Tire Test System. The computed cornering forces agree well with experimental results. After that, parametric studies are conducted by using the proposed simulation.

Finite Element Analysis of Ground Imitating Tank

2005 ◽  
Author(s):  
Jiemin Liu ◽  
Guangtao Ma
Keyword(s):  
Finite Element Method ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Dead Weight ◽  
Element Analysis ◽  
Thin Walled ◽  
The Dead ◽  
Stress And Deformation ◽  
Inertia Forces ◽  
Element Method

A typical ground imitating tank is analyzed regarding it as the thin-walled structure composed of plates (skins) and beams (reinforcement) using finite element method (FEM). Through moving the location of reinforcements, make the skins close with the flanges of the reinforcements in order to imitate actually the connection of the skins and the reinforcements. The thickness of plates, the size and the geometry shape and the location of reinforcements are taken as parameters to be optimized. In calculation, not only consider effects of the oil-weight, the extra-pressure in tank and the dead weight of the tank on the stresses and displacements of the tank, but also analyze the effects of the inertia forces produced due to the rotation of the tank on the stresses and displacements. Displacement, stress and deformation distributions of the ground imitating tank under the three typical flying postures imitated are given.

Finite Element Calculation of Sintering Deformation Using Limited Experimental Data

2008 ◽  
Vol 606 ◽  
pp. 103-118 ◽  
Author(s):  
Jing Zhe Pan ◽  
Ruo Yu Huang
Keyword(s):  
Experimental Data ◽  
Finite Element Method ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Ceramic Powder ◽  
Material Model ◽  
Element Analysis ◽  
Ceramic Components ◽  
On Line ◽  
Element Method

Predicting the sintering deformation of ceramic powder compacts is very important to manufactures of ceramic components. In theory the finite element method can be used to calculate the sintering deformation. In practice the method has not been used very often by the industry for a very simple reason – it is more expensive to obtain the material data required in a finite element analysis than it is to develop a product through trial and error. A finite element analysis of sintering deformation requires the shear and bulk viscosities of the powder compact. The viscosities are strong functions of temperature, density and grain-size, all of which change dramatically in the sintering process. There are two ways to establish the dependence of the viscosities on the microstructure: (a) by using a material model and (b) by fitting the experimental data. The materials models differ from each other widely and it can be difficult to know which one to use. On the other hand, obtaining fitting functions is very time consuming. To overcome this difficulty, Pan and his co-workers developed a reduced finite element method (Kiani et. al. J. Eur. Ceram. Soc., 2007, 27, 2377-2383; Huang and Pan, J. Eur. Ceram. Soc., available on line, 2008) which does not require the viscosities; rather the densification data (density as function of time) is used to predict sintering deformation. This paper provides an overview of the reduced method and a series of case studies.

Finite-Element Analysis of Magnetoelastic Buckling of Ferromagnetic Beam Plate

1980 ◽  
Vol 47 (2) ◽  
pp. 377-382 ◽  
Author(s):  
K. Miya ◽  
T. Takagi ◽  
Y. Ando
Keyword(s):  
Magnetic Field ◽  
Finite Element Method ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Experimental Results ◽  
The Finite Element Method ◽  
Magnetic Torque ◽  
Element Analysis ◽  
Element Method

Some corrections have been made hitherto to explain the great discrepancy between experimental and theoretical values of the magnetoelastic buckling field of a ferromagnetic beam plate. To solve this problem, the finite-element method was applied. A magnetic field and buckling equations of the ferromagnetic beam plate finite in size were solved numerically assuming that the magnetic torque is proportional to the rotation of the plate and by using a disturbed magnetic torque deduced by Moon. Numerical and experimental results agree well with each other within 25 percent.

Finite Element Analysis of 6-Wing Synchronous Rotor in the Mixing Process

2012 ◽  
Vol 271-272 ◽  
pp. 1291-1295
Author(s):  
Cai Jun Liu
Keyword(s):  
Finite Element Method ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Structural Analysis ◽  
Mixing Process ◽  
Element Analysis ◽  
Strain Stress ◽  
Design Requirements ◽  
Element Method

By use of finite element method to analyze the strength of 6-wing synchronous rotor, and illustrate the change of parameters regarding strain, stress and displacement etc. so as to visually see whether the designed rotor will reach the design requirements; meanwhile, through structural analysis, to provide guidance for the further optimization of designing for 6-wing synchronous rotor.

Research of the FEM Mesh Generation Based on Patran

2014 ◽  
Vol 525 ◽  
pp. 731-735 ◽  
Author(s):  
Qian Peng Han ◽  
Bo Peng
Keyword(s):  
Finite Element Method ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Mesh Generation ◽  
Mechanical Design ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Element Method

Finite element method(FEM) have been widely used in modern mechanical design,mesh generation is an important part of the finite element analysis,this article discussed the process of mesh generation through two practical cases and put forward some issues we should pay more attention to.

A Penetration-Based Finite Element Method for Hyperelastic 3D Biphasic Tissues in Contact: Part 1-Derivation of Contact Boundary Conditions

2005 ◽  
Vol 128 (1) ◽  
pp. 124-130 ◽  
Author(s):  
Kerem Ün ◽  
Robert L. Spilker
Keyword(s):  
Finite Element Method ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Boundary Conditions ◽  
Solid Phase ◽  
Contact Boundary ◽  
Element Analysis ◽  
Efficient Manner ◽  
Biphasic Tissues ◽  
Element Method

In this study, we extend the penetration method, previously introduced to simulate contact of linear hydrated tissues in an efficient manner with the finite element method, to problems of nonlinear biphasic tissues in contact. This paper presents the derivation of contact boundary conditions for a biphasic tissue with hyperelastic solid phase using experimental kinematics data. Validation of the method for calculating these boundary conditions is demonstrated using a canonical biphasic contact problem. The method is then demonstrated on a shoulder joint model with contacting humerus and glenoid tissues. In both the canonical and shoulder examples, the resulting boundary conditions are found to satisfy the kinetic continuity requirements of biphasic contact. These boundary conditions represent input to a three-dimensional nonlinear biphasic finite element analysis; details of that finite element analysis will be presented in a manuscript to follow.

THE SCALED BOUNDARY FINITE ELEMENT ANALYSIS OF SEEPAGE PROBLEMS IN MULTI-MATERIAL REGIONS

2012 ◽  
Vol 09 (01) ◽  
pp. 1240008 ◽  
Author(s):  
FENGZHI LI ◽  
QIANG TU
Keyword(s):  
Finite Element Method ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Numerical Solutions ◽  
Data Preparation ◽  
Element Analysis ◽  
Satisfactory Accuracy ◽  
Analytical Results ◽  
Scaled Boundary Finite Element ◽  
Element Method

The scaled boundary finite element method (SBFEM) is used to solve the seepage problems with multi-material regions. Two models of dam base with waterproof screen and dam body with the regions of two materials are established. The numerical solutions are obtained and then compared with the analytical results or numerical solutions in the references. The conclusion shows that the SBFEM has more satisfactory accuracy and less data preparation amount.

Sign in / Sign up

Export Citation Format

Share Document