Effect of series and parallel combination of photovoltaic thermal collectors on the performances of integrated active solar still

2021 ◽  
pp. 1-28
Author(s):  
G N Tiwari ◽  
Md Meraj ◽  
M.E. Khan ◽  
V K Dwevedi
Keyword(s):  
Water Depth ◽  
Electrical Energy ◽  
Solar Still ◽  
Packing Factor ◽  
Pv Module ◽  
Parallel Arrangement ◽  
Passive Solar Still ◽  
In Series ◽  
Parallel Case ◽  
Operating Temperature Range

Abstract In this paper, an analytical expression for hourly yield, electrical energy and overall exergy of self-sustained solar still integrated with series and parallel combination of photovoltaic thermal-compound parabolic concentrator (PVT-CPC) collectors have been derived. Based on numerical computations, it has been observed that the yield is maximum for all self-sustained PVT-CPC collectors are connected in series [case (i)]. Further, the daily yield and exergy increase with the increase of water depth unlike passive solar still for all collectors connected in series. However, overall exergy decreases with an increase of water depth for all collectors connected in parallel [case (iv)]. For numerical simulations, the total numbers of self-sustained PVT-CPC collectors has been considered as constant. Further, an effect of series and parallel combination of PVT-CPC collectors on daily yield, electrical energy and overall exergy have also been carried out. Following additional conclusions have also been drawn: (i) The daily yield of the proposed active solar still decreases with the increase of packing factor of semi-transparent PV module for a given water depth and electrical energy and overall exergy increase with water depth for case (i) as expected due to low operating temperature range at higher water depth in the basin. (i) The daily yield, electrical energy and overall exergy increase with the increase of water depth for all combination of series and parallel arrangement of PVT-CPC collectors for a packing factor of 0.22 as per our expectation.

Influence of Various Basin Types on Performance of Passive Solar Still: A Review

2021 ◽  
Vol 10 (4) ◽  
pp. 789-802
Author(s):  
Tri Hieu Le ◽  
Minh Tuan Pham ◽  
H Hadiyanto ◽  
Van Viet Pham ◽  
Anh Tuan Hoang
Keyword(s):  
Water Depth ◽  
Thermal Efficiency ◽  
Tracking System ◽  
Design Parameters ◽  
Cylindrical Shape ◽  
Solar Still ◽  
Practical Utilization ◽  
Passive Solar Still ◽  
Passive Solar ◽  
The Impact

Passive solar still is the simplest design for distilling seawater by harnessing solar energy. Although it is undeniable that solar still is a promising device to provide an additional freshwater source for global increasing water demand, low thermal efficiency along with daily distillate yield are its major disadvantages. A conventional solar still can produced 2 to 5 L/m2day. Various studies have been carried out to improve passive solar stills in terms of daily productivity, thermal efficiency, and economic effectiveness. Most of the researches that relate to the daily output improvement of passive solar still concentrates on enhancing evaporation or/and condensation processes. While the condensation process is influenced by wind velocity and characteristics of the condensed surface, the evaporation process is mainly affected by the temperature of basin water. Different parameters affect the brackish water temperature such as solar radiation, design parameters (for example water depth, insulators, basin liner absorptivity, reflectors, sun tracking system, etc). The inclined angle of the top cover is suggested to equal the latitude of the experimental place. Moreover, the decrease of water depth was obtained as a good operational parameter, however, the shallow water depth is required additional feed water for ensuring no dry spot existence. Reflectors and sun-tracking systems help solar still absorb as much solar intensity as possible. The internal reflector can enhance daily yield and efficiency of stepped solar still up to 75% and 56% respectively, whereas, passive solar still with the support of a sun-tracking system improved daily yield up to 22%. Despite large efforts to investigate the impact of the different parameters on passive solar distillation, the effect of the basin liner (including appropriate shapes and type of material), needs to be analyzed for improvement in practical utilization. The present work has reviewed the investigation of the solar still performance with various types of basin liner. The review of solar stills has been conducted critically with rectangular basin, fins basin, corrugated basin, wick type, steps shape, and cylindrical shape basin with variety of top cover shapes. The findings from this work conclude that the basin liner with a cylindrical shape had better performance in comparison with other metal types and provides higher freshwater output. Stepped type, inclined, fin absorber, and corrugated shapes had the efficient performance.  Further exploration revealed that copper is the best-used material for the productivity of passive solar still.

Effect of Inclination of Condensing Cover and Water Depth in Solar Still for Maximum Yield: In Winter Climatic Condition

2005 ◽  
Author(s):  
Anil Kr Tiwari ◽  
G. N. Tiwari
Keyword(s):  
Mass Transfer ◽  
Transfer Coefficient ◽  
Mass Transfer Coefficient ◽  
Water Depth ◽  
Climatic Condition ◽  
Maximum Yield ◽  
Effective Area ◽  
Solar Still ◽  
Passive Solar Still ◽  
Water Depths

In this communication, an effect of inclination of condensing cover and water depth in still, on convective mass transfer coefficient in passive solar still has been studied. Three solar stills with effective basin area of 1 m2 for three inclinations of condensing cover namely 15°, 30° and 45° have been considered. Another still with same effective area but fixed cover inclination of 30° is considered to see the effect of water depths on still performance for water depths 0.04m, 0.08m, 0.12m, 0.16m and 0.18m. Outdoor experiments have been conducted for Delhi climatic condition. Hourly variations of water, vapor, and cover temperatures along with yield have been measured. Regression analysis is used to determine the convective heat and mass transfer coefficient for outdoor condition. The 45° condensing cover is found giving maximum yield and lower water depth responded for higher yield in winter climatic condition.

Effect of Cover Inclination and Water Depth on Performance of a Solar Still for Indian Climatic Conditions

2008 ◽  
Vol 130 (2) ◽  
Author(s):  
Anil Kr. Tiwari ◽  
G. N. Tiwari
Keyword(s):  
Convective Heat ◽  
Water Depth ◽  
Convective Heat Transfer Coefficient ◽  
Climatic Conditions ◽  
New Delhi ◽  
Solar Still ◽  
Transfer Coefficients ◽  
Distillate Yield ◽  
Passive Solar Still ◽  
Indian Climatic

Effects of condensing cover inclination and water depth on the convective heat transfer coefficient and yield have been studied for a passive solar still. Three solar stills with an effective basin area of 1m2 each have been studied for three inclinations of condensing cover, namely, 15deg, 30deg, and 45deg. An identical solar still, but with a fixed cover inclination of 30deg, has also been tested to evaluate the effects of varying water depth. Outdoor experiments have been conducted for New Delhi climatic conditions (28°37′N∕77°13′E). Hourly variations of temperatures (water, vapor, and cover) and of distillate yield have been recorded and analyzed to determine convective heat and mass transfer coefficients. The resulting calculative extrapolation of experimental data from clear-day operation shows that the combination of minimum water depth and 15deg inclination of the condensing cover leads to maximum annual distillate yield for the climatic conditions of New Delhi. However, a cover inclination of 45deg is almost equally effective on an annual basis, but with better winter performance.

A Comparative Analysis and Effect of Water Depth on the Performance of Single Slope Basin Type Passive Solar Still Coupled with Flat Plate Collector and Evacuated Tube Collector

2017 ◽  
Vol 867 ◽  
pp. 195-202 ◽  
Author(s):  
Samraj Balamurugan ◽  
N. Shanmuga Sundaram ◽  
K. Prakash Marimuthu ◽  
J. Devaraj
Keyword(s):  
Experimental Investigation ◽  
Comparative Analysis ◽  
Water Depth ◽  
Design Parameters ◽  
Solar Still ◽  
Operational Parameters ◽  
Evacuated Tube Collector ◽  
Passive Solar Still ◽  
Flat Plate Collector ◽  
Evacuated Tube

Many experimental and numerical works have been done on different configurations of solar stills to optimize the design by investigative the effect of climatic, operational and design parameters on its performance. One of the most important of the operational parameters that has received a considerable attention in the literature is the brine depth. A study was subsequently conducted to verify this trend by an experimental investigation on three types of solar still that was fabricated with an area of 1 m2 and tested in the composite climate of Coimbatore, Tamilnadu, India, (Latitude: 11°N; Longitude; 77°E and an altitude of 409 m above sea level) with five different brine depths, namely 1, 4, 6, 8 and 10 cm. The present study clearly validated that the decreasing trend in productivity with the increase of brine depth.

Comparison of the performance of oscillating water column devices based on arrangements of water columns

2020 ◽  
Vol 14 (3) ◽  
pp. 7082-7093
Author(s):  
Jahirwan Ut Jasron ◽  
Sudjito Soeparmani ◽  
Lilis Yuliati ◽  
Djarot B. Darmadi
Keyword(s):  
Wave Propagation ◽  
Water Column ◽  
Water Depth ◽  
Graphical Form ◽  
Wave Power ◽  
Oscillating Water Column ◽  
Power Absorption ◽  
Water Columns ◽  
Single Column ◽  
Parallel Arrangement

The hydrodynamic performance of oscillating water column (OWC) depends on the depth of the water, the size of the water column and its arrangement, which affects the oscillation of the water surface in the column. An experimental method was conducted by testing 4 water depths with wave periods of 1-3 s. All data recorded by the sensor is then processed and presented in graphical form. The research focused on analyzing the difference in wave power absorption capabilities of the three geometric types of OWC based on arrangements of water columns. The OWC devices designed as single water column, the double water column in a series arrangement which was perpendicular to the direction of wave propagation, and double water column in which the arrangement of columns was parallel to the direction of wave propagation. This paper discussed several factors affecting the amount of power absorbed by the device. The factors are the ratio of water depth in its relation to wavelength (kh) and the inlet openings ratio (c/h) of the devices. The test results show that if the water depth increases in the range of kh 0.7 to 0.9, then the performance of the double chamber oscillating water column (DCOWC) device is better than the single chamber oscillating water column (SCOWC) device with maximum efficiency for the parallel arrangement 22,4%, series arrangement 20.8% and single column 20.7%. However, when referring to c/h, the maximum energy absorption efficiency for a single column is 27.7%, double column series arrangement is 23.2%, and double column parallel arrangement is 29.5%. Based on the results of the analysis, DCOWC devices in parallel arrangement showed the ability to absorb better wave power in a broader range of wave frequencies. The best wave of power absorption in the three testing models occurred in the wave period T = 1.3 seconds.

Performansi aktual modul photovoltaik dengan pengarah matahari

2018 ◽  
Vol 12 (2) ◽  
pp. 98 ◽  
Author(s):  
Jalaluddin . ◽  
Baharuddin Mire
Keyword(s):  
Solar Radiation ◽  
Local Time ◽  
Performance Characteristic ◽  
Electrical Energy ◽  
Photovoltaic Module ◽  
Experiment Data ◽  
Actual Performance ◽  
Pv Module ◽  
Solar Tracking ◽  
Pv Modules

Actual performance of photovoltaic module with solar tracking is presented. Solar radiation can be converted into electrical energy using photovoltaic (PV) modules. Performance of polycristalline silicon PV modules with and without solar tracking are investigated experimentally. The PV module with dimension 698 x 518 x 25 mm has maximum power and voltage is 45 Watt and 18 Volt respectively. Based on the experiment data, it is concluded that the performance of PV module with solar tracking increases in the morning and afternoon compared with that of fixed PV module. It increases about 18 % in the morning from 10:00 to 12:00 and in the afternoon from 13:30 to 14:00 (local time). This study also shows the daily performance characteristic of the two PV modules. Using PV module with solar tracking provides a better performance than fixed PV module. 

scholarly journals A Simple Mismatch Mitigating Partial Power Processing Converter for Solar PV Modules

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2308
Author(s):  
Kamran Ali Khan Niazi ◽  
Yongheng Yang ◽  
Tamas Kerekes ◽  
Dezso Sera
Keyword(s):  
Experimental Tests ◽  
Energy Yield ◽  
Power Electronic ◽  
Solar Pv ◽  
Partial Shading ◽  
Loss Analysis ◽  
Pv Systems ◽  
Pv Module ◽  
Pv Modules ◽  
In Series

Partial shading affects the energy harvested from photovoltaic (PV) modules, leading to a mismatch in PV systems and causing energy losses. For this purpose, differential power processing (DPP) converters are the emerging power electronic-based topologies used to address the mismatch issues. Normally, PV modules are connected in series and DPP converters are used to extract the power from these PV modules by only processing the fraction of power called mismatched power. In this work, a switched-capacitor-inductor (SCL)-based DPP converter is presented, which mitigates the non-ideal conditions in solar PV systems. A proposed SCL-based DPP technique utilizes a simple control strategy to extract the maximum power from the partially shaded PV modules by only processing a fraction of the power. Furthermore, an operational principle and loss analysis for the proposed converter is presented. The proposed topology is examined and compared with the traditional bypass diode technique through simulations and experimental tests. The efficiency of the proposed DPP is validated by the experiment and simulation. The results demonstrate the performance in terms of higher energy yield without bypassing the low-producing PV module by using a simple control. The results indicate that achieved efficiency is higher than 98% under severe mismatch (higher than 50%).

Sign in / Sign up

Export Citation Format

Share Document