Theoretical analysis of Rankine cycle operating with zeotropic mixtures of carbon dioxide and hydrocarbons

2021 ◽  
pp. 1-20
Author(s):  
Vineed Narayanan ◽  
Venkatarathnam Gadhiraju
Keyword(s):  
Carbon Dioxide ◽  
Theoretical Analysis ◽  
Heat Source ◽  
Thermal Efficiency ◽  
Multicomponent Mixture ◽  
Rankine Cycle ◽  
Small Scale ◽  
Multicomponent Mixtures ◽  
Power Cycles ◽  
Solar Powered

Abstract There is an increased interest in carbon dioxide based cycles as it requires smaller turbines than conventional Rankine cycles operating with steam. The focus of this work is the study of the performance of a Rankine cycle operating between 500 and 700 K (226.85 and 426.85 °C). Optimum mixtures of hydrocarbons and carbon dioxide have been worked out for use as working fluids in the above temperature range. This study shows that the use of multicomponent mixtures results in higher efficiency and smaller systems suitable for solar-powered small-scale power cycles. A thermal efficiency of 26.5% and volumetric work of 1945 J/l has been estimated with optimum multicomponent mixture derived in this work with a heat source temperature of 600 K and operating pressures of 100 and 40 bar at expander inlet and exit, respectively.

Application of Supercritical Fluids in Thermal- and Nuclear-Power Engineering

2021 ◽  
pp. 601-658
Author(s):  
Igor L. Pioro
Keyword(s):  
Heat Transfer ◽  
Carbon Dioxide ◽  
Supercritical Fluids ◽  
Nuclear Power ◽  
Power Plants ◽  
Thermal Power ◽  
Rankine Cycle ◽  
Working Fluid ◽  
Thermal Power Plants ◽  
Power Cycles

Supercritical Fluids (SCFs) have unique thermophyscial properties and heat-transfer characteristics, which make them very attractive for use in power industry. In this chapter, specifics of thermophysical properties and heat transfer of SCFs such as water, carbon dioxide, and helium are considered and discussed. Also, particularities of heat transfer at Supercritical Pressures (SCPs) are presented, and the most accurate heat-transfer correlations are listed. Supercritical Water (SCW) is widely used as the working fluid in the SCP Rankine “steam”-turbine cycle in fossil-fuel thermal power plants. This increase in thermal efficiency is possible by application of high-temperature reactors and power cycles. Currently, six concepts of Generation-IV reactors are being developed, with coolant outlet temperatures of 500°C~1000°C. SCFs will be used as coolants (helium in GFRs and VHTRs, and SCW in SCWRs) and/or working fluids in power cycles (helium, mixture of nitrogen (80%) and helium (20%), nitrogen and carbon dioxide in Brayton gas-turbine cycles, and SCW/“steam” in Rankine cycle).

Performance of Working Fluids for Power Generation in a Supercritical Organic Rankine Cycle

2012 ◽  
Author(s):  
Rachana Vidhi ◽  
Sarada Kuravi ◽  
Saeb Besarati ◽  
E. K. Stefanakos ◽  
D. Yogi Goswami ◽  
...  
Keyword(s):  
Power Generation ◽  
Heat Source ◽  
Thermal Efficiency ◽  
Thermodynamic Cycle ◽  
Rankine Cycle ◽  
Operating Conditions ◽  
Working Fluids ◽  
Source Temperature ◽  
Heat Source Temperature ◽  
Organic Fluids

This paper reports on the performance of various organic refrigerants and their mixtures as working fluids for power generation in a supercritical Rankine cycle (SRC) from geothermal sources. Organic fluids that have zero or very low ozone depletion potential and are environmentally safe are selected for this study. Geothermal source temperature is varied from 125–200°C, and the cooling water temperature is changed from 10–20°C. The effect of varying operating conditions on the performance of the thermodynamic cycle has been analyzed. Operating pressure of the cycle has been optimized for thermal efficiency for each fluid at each source temperature. The condensation pressure is determined by the cooling condition and is kept fixed for each condensation temperature. Energy and exergy efficiencies of the cycle have been obtained for the pure fluids as a function of heat source temperature. Mixtures of organic fluids have been analyzed and effect of composition on performance of the thermodynamic cycle has been studied. It is observed that thermal efficiency over 20% can be achieved for 200°C heat source temperature and the lowest cooling temperature. When mixtures are considered as working fluids, the thermal efficiency of the cycle is observed to remain between the thermal efficiencies of the constituent fluids.

scholarly journals Utilization of Indonesia’s Hot Spring Sources for Electricity using Kalina Cycle and Organic Rankine Cycle

2018 ◽  
Vol 31 ◽  
pp. 01002 ◽  
Author(s):  
Grano Prabumukti ◽  
Widodo Wahyu Purwanto
Keyword(s):  
Heat Source ◽  
Thermal Efficiency ◽  
Hot Springs ◽  
Hot Spring ◽  
Organic Rankine Cycle ◽  
Rankine Cycle ◽  
Working Fluid ◽  
Power Capacity ◽  
Spring Temperature ◽  
Kalina Cycle

Indonesia posses 40% of the world's geothermal energy sources. The existence of hydrothermal sources is usually characterized by their surface manifestations such as hot springs, geysers and fumarole. Hot spring has a potential to be used as a heat source to generate electricity especially in a rural and isolated area. Hot springs can be converted into electricity by binary thermodynamic cycles such as Kalina cycle and ORC. The aim of this study is to obtain the best performances of cycle configuration and the potential power capacity. Simulation is conducted using UNISIM software with working fluid and its operating condition as the decision variables. The simulation result shows that R1234yf and propene with simple ORC as desired working fluid and cycle configuration. It reaches a maximum thermal efficiency up to 9.6% with a specific turbine inlet pressure. Higher temperature heat source will result a higher thermal efficiency‥ Cycle thermal efficiency varies from 4.7% to 9.6% depends on source of hot spring temperature. Power capacity that can be generated using Indonesia’s hot spring is ranged from 2 kWe to 61.2 kWe. The highest capacity located in Kawah Sirung and the least located in Kaendi.

Application of Supercritical Pressures in Power Engineering

2017 ◽  
pp. 404-457
Author(s):  
Igor Pioro ◽  
Mohammed Mahdi ◽  
Roman Popov
Keyword(s):  
Heat Transfer ◽  
Carbon Dioxide ◽  
High Temperature ◽  
Gas Turbine ◽  
Power Plants ◽  
Thermal Power ◽  
Rankine Cycle ◽  
Working Fluid ◽  
Thermal Power Plants ◽  
Power Cycles

SuperCritical Fluids (SCFs) have unique thermophyscial properties and heat-transfer characteristics, which make them very attractive for use in power industry. In this chapter, specifics of thermophysical properties and heat transfer of SCFs such as water, carbon dioxide and helium are considered and discussed. Also, particularities of heat transfer at SuperCritical Pressures (SCPs) are presented, and the most accurate heat-transfer correlations are listed. SuperCritical Water (SCW) is widely used as the working fluid in the SCP Rankine “steam”-turbine cycle in fossil-fuel thermal power plants. This increase in thermal efficiency is possible by application of high-temperature reactors and power cycles. Currently, six concepts of Generation-IV reactors are being developed, with coolant outlet temperatures of 500°C~1000°C. SCFs will be used as coolants (helium in GFRs and VHTRs; and SCW in SCWRs) and/or working fluids in power cycles (helium; mixture of nitrogen (80%) and helium [20%]; nitrogen, and carbon dioxide in Brayton gas-turbine cycles; and SCW “steam” in Rankine cycle).

scholarly journals Investigation on a small-scale pumpless Organic Rankine Cycle (ORC) system driven by the low temperature heat source

2017 ◽  
Vol 195 ◽  
pp. 478-486 ◽  
Author(s):  
L. Jiang ◽  
H.T. Lu ◽  
L.W. Wang ◽  
P. Gao ◽  
F.Q. Zhu ◽  
...  
Keyword(s):  
Low Temperature ◽  
Heat Source ◽  
Organic Rankine Cycle ◽  
Rankine Cycle ◽  
Small Scale ◽  
Temperature Heat

scholarly journals Comparison of single and double stage regenerative organic rankine cycle for medium grade heat source through energy and exergy estimation

2019 ◽  
Vol 8 (2) ◽  
pp. 141 ◽  
Author(s):  
Ghalya Pikra ◽  
Nur Rohmah
Keyword(s):  
Heat Source ◽  
Flow Rate ◽  
Power Output ◽  
Thermal Efficiency ◽  
Organic Rankine Cycle ◽  
Rankine Cycle ◽  
Exergy Efficiency ◽  
Working Fluid ◽  
Energy And Exergy ◽  
Net Power Output

Regenerative organic Rankine cycle (RORC) can be used to improve organic Rankine cycle (ORC) performance. This paper presents a comparison of a single (SSRORC) and double stage regenerative organic Rankine cycle (DSRORC) using a medium grade heat source. Performance for each system is estimated using the law of thermodynamics I and II through energy and exergy balance. Solar thermal is used as the heat source using therminol 55 as a working fluid, and R141b is used as the organic working fluid. The initial data for the analysis are heat source with 200°C of temperature, and 100 L/min of volume flow rate. Analysis begins by calculating energy input to determine organic working fluid mass flow rate, and continued by calculating energy loss, turbine power and pump power consumption to determine net power output and thermal efficiency. Exergy analysis begins by calculating exergy input to determine exergy efficiency. Exergy loss, exergy destruction at the turbine, pump and feed heater is calculated to complete the calculation. Energy estimation result shows that DSRORC determines better net power output and thermal efficiency for 7.9% than SSRORC, as well as exergy estimation, DSRORC determines higher exergy efficiency for 7.69%. ©2019. CBIORE-IJRED. All rights reserved

Thermodynamic Analysis and Multi-Objective Optimizations of a Combined Recompression sCO2 Brayton Cycle: tCO2 Rankine Cycles for Waste Heat Recovery

2018 ◽  
Author(s):  
Ali S. Alsagri ◽  
Andrew Chiasson ◽  
Ahmad Aljabr
Keyword(s):  
Carbon Dioxide ◽  
Thermodynamic Analysis ◽  
Thermal Efficiency ◽  
High Efficiency ◽  
Waste Heat ◽  
Rankine Cycle ◽  
Combined Cycle ◽  
Brayton Cycle ◽  
Power Cycle ◽  
Exhaust Temperature

A thermodynamic analysis and optimization of a newly-conceived combined power cycle were conducted in this paper for the purpose of improving overall thermal efficiency of power cycles by attempting to minimize thermodynamic irreversibilities and waste heat as a consequence of the Second Law. The power cycle concept comprises a topping advanced recompression supercritical carbon dioxide (sCO2) Brayton cycle and a bottoming transcritical carbon dioxide (tCO2) Rankine cycle. The bottoming cycle configurations included a simple tCO2 Rankine cycle and a split tCO2 Rankine cycle. The topping sCO2 recompression Brayton cycle used a combustion chamber as a heat source, and waste heat from a topping cycle was recovered by the tCO2 Rankine cycle due to an added high efficiency recuperator for generating electricity. The combined cycle configurations were thermodynamically modeled and optimized using an Engineering Equation Solver (EES) software. Simple bottoming tCO2 Rankine cycle cannot fully recover the waste heat due to the high exhaust temperature from the top cycle, and therefore an advance split tCO2 Rankine cycle was employed in order to recover most of the waste heat. Results show that the highest thermal efficiency was obtained with recompression sCO2 Brayton cycle – split flow tCO2 Rankine cycle. Also, the results show that the combined CO2 cycles is a promising technology compared to conventional cycles.

scholarly journals Experimental Investigation of a 560 Watt Organic Rankine Cycle System using R134a as Working Fluid and Plat Solar Collector as Heat Source

2021 ◽  
Vol 4 (3) ◽  
pp. 169-172
Author(s):  
Awaludin Martin ◽  
Muhammad Nur
Keyword(s):  
Energy Source ◽  
Solar Energy ◽  
Heat Source ◽  
Organic Rankine Cycle ◽  
Rankine Cycle ◽  
Maximum Efficiency ◽  
Working Fluid ◽  
Energy Sources ◽  
Small Scale ◽  
Cycle System

New and renewable energy sources such as solar, geothermal, and waste heat  are energy sources that can be used as a source of energy for Organic Rankine cycle system because the organic Rankine cycle (ORC) requires heat at low temperatures to be used as energy source. The experimental of Organic Rankine Cycle (ORC) systems with solar energy as a heat source was conduct to investigate a small-scale ORC system with R134a as a working fluid by varying the heat source at temperature 75⁰C-95⁰C. The experiment resulted a maximum efficiency, power of system is 4.30%, and 185.9 Watt, where the temperature of heat source is 95⁰C, the pressure and temperature of steam inlet turbine is 1.38 MPa and 67.9oC respectively. Solar energy as the main energy source in the ORC system can reduce energy use up to 49.9% or 4080.8 kJ where the temperature of the water as the heat source in the evaporator is 51°C.

Sign in / Sign up

Export Citation Format

Share Document