Hyper SuDoKu Based Solar PV Array Reconfiguration for Maximum Power Enhancement under Partial Shading Conditions

2021 ◽  
pp. 1-36
Author(s):  
Shahroz Anjum ◽  
Vivekananda Mukherjee ◽  
Gitanjali Mehta
Keyword(s):  
Electrical Power ◽  
Maximum Power ◽  
Global Maximum ◽  
Maximum Output ◽  
Solar Pv ◽  
Partial Shading ◽  
Power Extraction ◽  
Performance Factors ◽  
Pv Array ◽  
The Impact

Abstract This manuscript focuses on the rearrangement of the structure of the photovoltaic (PV) array under different shading conditions. It aims to analyze the mismatch power losses (MPLs) due to irregular illumination over PV array (PVA). The impact of partial irradiance not only affects the electrical power but also causes multiple peaks in the P-V and I-V curves. The formulation of the best PVA configuration (PVAC) to achieve maximum output even under partial shading conditions is the deciding factor for the topologies considered. To aid the maximum power extraction, a new SuDoKu PVAC is designed like hyper SuDoKu (HS). This new structure is compared with the already existing PVACs such as bridge link, honey comb, series parallel, total cross-tied, and SuDoKu in the effect of considerable cases of shadowing. MATLAB/SIMULINK is used for the designing and computer based modeling of all these PVACs is considered in this work. The evaluation of these arrangements has been done by keeping several performance factors as the deciding pivot points. These factors include MPL, efficiency, global maximum power point (GMPP), and fill factor (FF). The results obtained through this document suggest that the HS arrangement proposed here gives the best outcome for each shading condition. The proposed HS structural arrangement of PVA deals with significantly superior GMPP, FF and efficiency while maintaining minimum MPL in comparison to the other arrangements.

Advanced SuDoKu Based Reconfiguration Strategies for Maximum Power Extraction from Partially Shaded Solar PV Array

2021 ◽  
pp. 1-33
Author(s):  
Shahroz Anjum ◽  
Vivekananda Mukherjee ◽  
Gitanjali Mehta
Keyword(s):  
Individual Performance ◽  
Maximum Power ◽  
Performance Ratio ◽  
Global Maximum ◽  
Solar Pv ◽  
Partial Shading ◽  
Power Extraction ◽  
Pv Array ◽  
And Performance ◽  
Shading Effects

Abstract Individual performance of photovoltaic (PV) modules is contravened by mismatch losses which results in blockage in most of the solar power generated by the PV array (PVA). Partial shading conditions (PSCs) are the main causes of these losses. Several techniques have been discussed to reduce the issues caused by PSCs. Reconfiguration techniques have been proven to be one of the most successful methods that help towards this cause. In this method, the location of PV module (PVM) in the PVA is reconfigured so that the shading effects get distributed throughout the entire array and, hence, maximizing the power output. Two novel reconfiguration patterns such as canonical SuDoKu (CS) and multi diagonal SuDoKu (MDS) for total cross tied (TCT) configuration have been put forth in this manuscript. This approach aims to rearrange the PVMs in the TCT array as per the fed in patterns without causing a change in the internal electrical connections. Further parts of the manuscript focus on the comparison of the proposed pattern's performance with other pre-existing PVA arrangements such as, TCT, SuDoKu, optimal SuDoKu (OS) and modified SuDoku (MS) by taking into account the effects of global maximum power (GMP) point, mismatch power loss, fill factor and performance ratio. The results obtained from the detailed analysis presented in this paper gives proper evidence that, in many cases, the GMP is amplified in the CS and, in all cases, GMP is amplified in the proposed MDS PVA under different shading conditions.

scholarly journals Investigation of Partial Shading Scenarios on a Photovoltaic Array’s Characteristics

Electronics ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 96
Author(s):  
Abdelilah Chalh ◽  
Aboubakr El Hammoumi ◽  
Saad Motahhir ◽  
Abdelaziz El Ghzizal ◽  
Aziz Derouich ◽  
...  
Keyword(s):  
Maximum Power ◽  
Global Maximum ◽  
Pv System ◽  
Maximum Power Point ◽  
Simple Method ◽  
Partial Shading ◽  
Pv Array ◽  
Power Point ◽  
Two Peaks ◽  
The Impact

The purpose of this study is to investigate the impact of different partial shading scenarios on a PV array’s characteristics in order to develop a simple and easy-to-implement GMPP controller that tracks the PV array’s global maximum power point (GMPP). The P-V characteristic of the PV array becomes more complicated under partial shading, owing to the presence of many power peaks, as opposed to uniform irradiance conditions, when there is only one peak called the maximum power point. In fact, and according to an experiment conducted in this study, when a PV array is partially shaded, the P-V characteristic mostly presents two peaks, given the existence of only two levels of irradiance, one of which is called the global peak (i.e., the GMPP). Furthermore, the first peak is located at Vmpp1 (the PV array’s voltage corresponds to this peak), whereas the second is at Vmpp2. The proposed approach works by estimating the values of Vmpp1 and Vmpp2 using two equations in order to control the DC/DC converter of the PV system. The first equation is used when the GMPP is at the first peak, while the other is used when the GMPP is at the second peak. Several scenarios are simulated and presented in this paper to verify the accuracy of these equations. In addition, some conclusions are drawn to suggest a simple method for tracking the GMPP.

Solar PV array reconfiguration under partial shading conditions for maximum power extraction using genetic algorithm

2015 ◽  
Vol 43 ◽  
pp. 102-110 ◽  
Author(s):  
Shubhankar Niranjan Deshkar ◽  
Sumedh Bhaskar Dhale ◽  
Jishnu Shekar Mukherjee ◽  
T. Sudhakar Babu ◽  
N. Rajasekar
Keyword(s):  
Genetic Algorithm ◽  
Maximum Power ◽  
Solar Pv ◽  
Partial Shading ◽  
Power Extraction ◽  
Pv Array

Particle Swarm Optimization Based Solar PV Array Reconfiguration of the Maximum Power Extraction Under Partial Shading Conditions

2018 ◽  
Vol 9 (1) ◽  
pp. 74-85 ◽  
Author(s):  
Thanikanti Sudhakar Babu ◽  
J. Prasanth Ram ◽  
Tomislav Dragicevic ◽  
Masafumi Miyatake ◽  
Frede Blaabjerg ◽  
...  
Keyword(s):  
Particle Swarm Optimization ◽  
Particle Swarm ◽  
Maximum Power ◽  
Solar Pv ◽  
Partial Shading ◽  
Swarm Optimization ◽  
Power Extraction ◽  
Pv Array

scholarly journals Effect of partial shading in grid connected solar PV system with FL controller

2021 ◽  
Vol 12 (1) ◽  
pp. 431
Author(s):  
K Latha Shenoy ◽  
C. Gurudas Nayak ◽  
Rajashekar P. Mandi
Keyword(s):  
System Performance ◽  
Alternative Energy ◽  
Operating Conditions ◽  
Maximum Power ◽  
Solar Pv ◽  
Pv System ◽  
Partial Shading ◽  
Power Extraction ◽  
Pv Array ◽  
Solar Pv System

As conventional fossil fuel reserves shrink and the danger of climate change prevailing, the need for alternative energy sources is unparalleled. A smart approach to compensate the dependence on electricity generated by burning fossil fuels is through the power generation using grid connected PV system. Partial shading on PV array affects the quantity of the output power in photovoltaic (PV) systems. To extract maximum power from PV under variable irradiance, variable temperature and partial shading condition, various MPPT algorithms are used. Incremental conductance and fuzzy based MPPT techniques are used for maximum power extraction from PV array. Basically 11 kW Solar PV system comprising of PV array coupled with an Inverter through a dc-dc converter is considered for the analysis and output of the inverter is supplied to the load through the LCL filter. An Intelligent controller for maximum power point tracking of PV power is designed. Also, a fuzzy controller for VSC is developed to improve the system performance. The above proposed design has been simulated in the MATLAB/Simulink and analyzed the system performance under various operating conditions. Finally, the performance is evaluated with IEEE 1547 standard for showing the effectiveness of the system.

scholarly journals Power Enhancement from Solar PV Array Topologies under Partial Shading Condition

2018 ◽  
Vol 10 (01) ◽  
pp. 33-40
Author(s):  
Santosh Kumar Singh ◽  
Anurag Singh Yadav ◽  
Ashutosh Srivastava ◽  
Amarjeet Singh
Keyword(s):  
Maximum Output Power ◽  
Maximum Output ◽  
Solar Photovoltaic ◽  
Solar Pv ◽  
Partial Shading ◽  
Pv Array ◽  
Power Enhancement ◽  
Pv Modules ◽  
Multiple Load ◽  
Mismatch Effect

In this paper, a detailed study is carried out on the solar photovoltaic (PV) array topologies under various shading patterns. The aim of this study is to investigate the mismatch effect losses in PV modules for non uniform irradiations. The shading causes not only power losses, but also non-linearity of P-V characteristics. Under partial shaded conditions, the P-V and I-V characteristics exhibit extreme non-linearity along with multiple load maxima. In this paper, the investigations of the optimal layout of PV modules in a PV array are worked out to provide maximum output power under various shaded conditions. Three type of solar PV array topologies e.g. Series-parallel (SP), Total cross tied (TCT) and Bridge link (BL) are considered for various typesof shaded patterns. The modeling of solar PV array for various types of topologies is done in MATLAB/Simulink environment. The extensive results have been taken on these topologies for partial shading patterns and analyzed, which proves the TCT topology performance is better as compared to other topologies for most of the shading patterns.

An Advanced MPPT Based on Artificial Bee Colony Algorithm for MPPT Photovoltaic System under Partial Shading Condition

2017 ◽  
Vol 8 (2) ◽  
pp. 647 ◽  
Author(s):  
Salmi Hassan ◽  
Badri Abdelmajid ◽  
Zegrari Mourad ◽  
Sahel Aicha ◽  
Baghdad Abdenaceur
Keyword(s):  
Local Maximum ◽  
Maximum Power ◽  
Photovoltaic System ◽  
Solar Irradiation ◽  
Global Maximum ◽  
Maximum Power Point ◽  
Partial Shading ◽  
Pv Array ◽  
Point Tracking ◽  
Power Point

<p>Maximum power point tracking (MPPT) algorithms are employed in photovoltaic (PV) systems to make full utilization of PV array output power, which have a complex relationship between ambient temperature and solar irradiation. The power-voltage characteristic of PV array operating under partial shading conditions (PSC) exhibits multiple local maximum power points (LMPP). In this paper, an advanced algorithm has been presented to track the global maximum power point (GMPP) of PV. Compared with the Perturb and Observe (P&amp;O) techniques, the algorithm proposed the advantages of determining the location of GMPP whether partial shading is present.</p>

Power Enhancement from Solar PV Array Topologies under Partial Shading Condition

2018 ◽  
Vol 10 (1) ◽  
Author(s):  
Santosh Kumar Singh ◽  
Anurag Singh Yadav ◽  
Ashutosh Srivastava ◽  
Amarjeet Singh
Keyword(s):  
Maximum Output Power ◽  
Maximum Output ◽  
Solar Photovoltaic ◽  
Solar Pv ◽  
Partial Shading ◽  
Pv Array ◽  
Power Enhancement ◽  
Pv Modules ◽  
Multiple Load ◽  
Mismatch Effect

In this paper, a detailed study is carried out on the solar photovoltaic (PV) array topologies under various shading patterns. The aim of this study is to investigate the mismatch effect losses in PV modules for non uniform irradiations. The shading causes not only power losses, but also non-linearity of P-V characteristics. Under partial shaded conditions, the P-V and I-V characteristics exhibit extreme non-linearity along with multiple load maxima. In this paper, the investigations of the optimal layout of PV modules in a PV array are worked out to provide maximum output power under various shaded conditions. Three type of solar PV array topologies e.g. Series-parallel (SP), Total cross tied (TCT) and Bridge link (BL) are considered for various types of shaded patterns. The modeling of solar PV array for various types oopologies is done in MATLAB/Simulink environment. The extensive results have been taken on these topologies for partial shading patterns and analyzed, which proves the TCT topology performance is better as compared to other topologies for most of the shading patterns.

Cuckoo Search Based Approach Towards Maximum Power Point Tracking for Solar Photovoltaic System Under Partial Shading

2019 ◽  
Vol 16 (8) ◽  
pp. 3338-3345 ◽  
Author(s):  
Paresh S. Nasikkar ◽  
Chandrakant D. Bhos
Keyword(s):  
Maximum Power Point Tracking ◽  
Cuckoo Search ◽  
Maximum Power ◽  
Global Maximum ◽  
Solar Pv ◽  
Maximum Power Point ◽  
Partial Shading ◽  
Point Tracking ◽  
Power Point Tracking ◽  
Power Point

Extracting the maximum power from as solar PV system is a critical task when high changes in light intensity or Partial Shading Condition (PSC) are experienced. The latter case is more difficult as it creates multiple maxima points on P–V curve. In this way, it is obligatory to thoroughly pick a precise Maximum Power Point Tracking (MPPT) method which recognizes adequately the Global Maximum Power Point (GMPP) and tracks it under partial shading. This paper first describes the modeling of PV module and PV characteristics under uniform irradiance as well as effect of PSC on PV characteristics. In the latter sections, a review of conventional and intelligent MPPT methods is done. To tackle the problem of MPPT under PSC, two metaheurisric algorithms namely Particle Swarm Optimization (PSO) and Genetic Algorithm (GA) are described briefly. A new optimization method called Cuckoo Search (CS) is implemented in MATLAB SIMULINK tool and tested under three different PSC patterns. A comparative analysis of different MPPT strategies is made after analyzing the results.

Sign in / Sign up

Export Citation Format

Share Document