Effect of Fin Orientation on Melting Process in Horizontal Double Pipe Thermal Energy Storage Systems

2021 ◽  
pp. 1-16
Author(s):  
Nesrine Boulaktout ◽  
El-Hacène Mezaache ◽  
Mohamed Teggar ◽  
Müslüm Arici ◽  
K.A.R. Ismail ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Energy Storage ◽  
Phase Change ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Storage Systems ◽  
Melting Process ◽  
Storage Unit ◽  
Charging Time ◽  
Thermal Energy Storage Systems

Abstract Immersion of fins in latent heat thermal energy storage systems has been used as an influential approach to remedy the poor thermal conductivity of phase-change materials. Present paper numerically investigates heat transfer and phase change improvement by means of longitudinal fins in a shell and tube thermal energy storage unit. The main aim of this study is to investigate the effect of fin orientation on the performance of the storage unit. Six configurations of different fin numbers (2, 4 and 8 fins) and orientations (π/2, π/4, and π/8) are tested. For simulations, a 2D mathematical model incorporating the enthalpy-porosity method and finite volume techniques are established and solved by ANSYS-Fluent. The numerical predictions are successfully validated by comparison with experimental and numerical data from the literature. Heat transfer characteristics and melting process are analyzed through streamlines, isotherms, mean temperature, heat flux and heat transfer coefficient as well as transient melting front position and liquid fractions. Results show that orientation of fins has significant impact on the charging time for two cases (2 and 4 fins) whereas no significant reduction in charging time was obtained for the case of 8 fins. In case of utilizing 2 fins, a fin orientation of 0° (vertical fins) shortens the charging time by up to 2.5 folds compared to the horizontal fins (90°). These results could help designing efficient latent thermal energy storage units.

scholarly journals Investigation of the dynamic characteristics of a thermal energy storage unit filled with multiple phase change materials

2018 ◽  
Vol 22 (Suppl. 2) ◽  
pp. 527-533 ◽  
Author(s):  
Xiaoyan Li ◽  
Rongpeng Huang ◽  
Xinyue Miao ◽  
Xuelei Wang ◽  
Yabin Liu ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Energy Storage ◽  
Phase Change ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Phase Change Materials ◽  
Storage Systems ◽  
Heat Transfer Fluid ◽  
Energy Storage Systems ◽  
Thermal Energy Storage Systems

In order to improve the thermal performance of thermal energy storage systems, a packed bed thermal energy storage systems unit using spherical capsules filled with multiple phase change materials (multi-PCM) for use in conventional air-conditioning systems is presented. A 3-D mathematical model was established to investigate the charging characteristics of the thermal energy storage systems unit. The optimum proportion between the multi-PCM was identified. The effects of heat transfer fluid-flow rate and heat transfer fluid inlet temperature on the liquid phase change materials volume fraction, charging time and charging capacity of the thermal energy storage system unit are studied. The results indicate that the charging capacity of multi-PCM units is higher than that of the conventional single-PCM (HY-2). For proportions 0:1:0, 2:3:3, 3:2:3, 3:3:2, 4:1:3, and 4:2:2, the charging capacity decreases by approximately 24.84%, 14.69%, 6.47%, 3.82%, and 1.13%, respectively, compared to the 4:2:2 proportion. Moreover, decreasing the heat transfer fluid inlet temperature can obviously shorten the complete charging time of the thermal energy storage systems unit.

scholarly journals Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3821
Author(s):  
Kassianne Tofani ◽  
Saeed Tiari
Keyword(s):  
Energy Storage ◽  
Phase Change ◽  
Latent Heat ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Phase Change Materials ◽  
Storage Systems ◽  
Heat Pipes ◽  
Energy Storage Systems ◽  
Thermal Energy Storage Systems

Latent heat thermal energy storage systems (LHTES) are useful for solar energy storage and many other applications, but there is an issue with phase change materials (PCMs) having low thermal conductivity. This can be enhanced with fins, metal foam, heat pipes, multiple PCMs, and nanoparticles (NPs). This paper reviews nano-enhanced PCM (NePCM) alone and with additional enhancements. Low, middle, and high temperature PCM are classified, and the achievements and limitations of works are assessed. The review is categorized based upon enhancements: solely NPs, NPs and fins, NPs and heat pipes, NPs with highly conductive porous materials, NPs and multiple PCMs, and nano-encapsulated PCMs. Both experimental and numerical methods are considered, focusing on how well NPs enhanced the system. Generally, NPs have been proven to enhance PCM, with some types more effective than others. Middle and high temperatures are lacking compared to low temperature, as well as combined enhancement studies. Al2O3, copper, and carbon are some of the most studied NP materials, and paraffin PCM is the most common by far. Some studies found NPs to be insignificant in comparison to other enhancements, but many others found them to be beneficial. This article also suggests future work for NePCM and LHTES systems.

Convective Heat Transfer in Porous Media

1979 ◽  
Vol 101 (3) ◽  
pp. 507-510 ◽  
Author(s):  
Ali Montakhab
Keyword(s):  
Heat Transfer ◽  
Porous Media ◽  
Energy Storage ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Storage Systems ◽  
Energy Storage Systems ◽  
Thermal Energy Storage Systems

Convective heating or cooling of granular solids or porous media is of interest in the design of thermal energy storage systems. The solutions to the energy initial boundary value problems governing convective heat transfer between a fixed bed of granular solids and a steady flow of heating or cooling fluid are presented. The storage system is considered to be initially in thermal equilibrium at a uniform temperature, a step change in the inlet temperature of the working fluid is imposed, and the thermal response of the system predicted. The results are valid for gases and liquids when the temperature gradient in the solid material is small and axial conduction effect is negligible in comparison with the convective heat transfer. Unlike the previously available solutions to this problem, the results presented are in closed form. This greatly simplifies evaluation and design of thermal energy storage systems of this general type.

Sign in / Sign up

Export Citation Format

Share Document