scholarly journals Les Investigations of Periodic Cavitation Shedding with Special Emphasis On Three-Dimensional Asymmetry in a Scaled-Up Nozzle Orifice

2021 ◽  
Author(s):  
Wenjie Bai ◽  
Arris S. Tijsseling ◽  
Jun Wang ◽  
Quan Duan ◽  
Zaoxiao Zhang
Keyword(s):  
Pressure Fluctuations ◽  
Three Dimensional ◽  
Cloud Cavitation ◽  
Nozzle Orifice ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Spectrum Density ◽  
Shedding Frequency ◽  
2D And 3D ◽  
Unsteady Cavitating Flow

Abstract The periodic shedding of cloud cavitation in a nozzle orifice has a significant influence on the flow field and may have destructive effects. Most of the existing research on the shedding of cloud cavitation in an orifice is based on experimental visualization with focus on the 2D motion of the re-entrant jet and the shedding mechanism. However, the actual cloud cavitation shedding in an orifice is a complex 3D process. Some limited signs of three-dimensionality and asymmetry in cylindrical orifices have been detected recently, but the 3D shedding characteristics remain unclear. In this paper, the cavitation regimes and periodic shedding process in the scaled-up nozzle orifice used by Stanley experiment were simulated with Large Eddy Simulation (LES). The re-entrant jet and periodic shedding mechanism, as well as the shedding frequency, were analyzed from 2D and 3D perspectives. The main results show that the simulated cavitation regimes and the 2D periodic shedding mechanism agree fairly well with the experimental observations, but more 3D features are revealed. By analyzing the 3D shedding process and the three-dimensionality caused by the inclination of the closure line, the three-dimensional asymmetric shedding mode with phase difference p is revealed. Based upon this finding, the shedding frequency and Strouhal number are calculated. The corresponding relationships between shedding frequencies and the frequency peaks of the power spectrum density (PSD) for pressure fluctuations are also confirmed. These results extend the understanding of the unsteady cavitating flow within nozzle orifices from 2D to 3D patterns.

scholarly journals Comparative Study of Different Turbulence Models for Cavitational Flows around NACA0012 Hydrofoil

2021 ◽  
Vol 9 (7) ◽  
pp. 742
Author(s):  
Minsheng Zhao ◽  
Decheng Wan ◽  
Yangyang Gao
Keyword(s):  
Angle Of Attack ◽  
Large Angle ◽  
Turbulence Models ◽  
Navier Stokes ◽  
Specific Information ◽  
Cloud Cavitation ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Shedding Frequency ◽  
Reynolds Average

The present work focuses on the comparison of the numerical simulation of sheet/cloud cavitation with the Reynolds Average Navier-Stokes and Large Eddy Simulation(RANS and LES) methods around NACA0012 hydrofoil in water flow. Three kinds of turbulence models—SST k-ω, modified SST k-ω, and Smagorinsky’s model—were used in this paper. The unstable sheet cavity and periodic shedding of the sheet/cloud cavitation were predicted, and the simulation results, namelycavitation shape, shedding frequency, and the lift and the drag coefficients of those three turbulence models, were analyzed and compared with each other. The numerical results above were basically in accordance with experimental ones. It was found that the modified SST k-ω and Smagorinsky turbulence models performed better in the aspects of cavitation shape, shedding frequency, and capturing the unsteady cavitation vortex cluster in the developing and shedding period of the cavitation at the cavitation number σ = 0.8. At a small angle of attack, the modified SST k-ω model was more accurate and practical than the other two models. However, at a large angle of attack, the Smagorinsky model of the LES method was able to give specific information in the cavitation flow field, which RANS method could not give. Further study showed that the vortex structure of the wing is the main cause of cavitation shedding.

scholarly journals Cloud Cavitating Flow Over a Submerged Axisymmetric Projectile and Comparison Between Two-Dimensional RANS and Three-Dimensional Large-Eddy Simulation Methods

2016 ◽  
Vol 138 (6) ◽  
Author(s):  
Yiwei Wang ◽  
Chenguang Huang ◽  
Xin Fang ◽  
Xianian Yu ◽  
Xiaocui Wu ◽  
...  
Keyword(s):  
Large Eddy Simulation ◽  
Fluid Dynamic ◽  
Three Dimensional ◽  
Cavitating Flow ◽  
Two Dimensional ◽  
Cloud Cavitation ◽  
Cavity Collapse ◽  
Eddy Simulation ◽  
2D Simulation ◽  
Large Eddy

For the cloud cavitation around slender axisymmetric projectiles, a two-dimensional (2D) numerical method was based on the mixture approach with Singhal cavitation model and modified renormalization-group (RNG) k–ε turbulence model, and a three-dimensional (3D) method was established with large-eddy simulation (LES) and volume of fraction (VOF) approach. The commercial computational fluid dynamic (CFD) software fluent is used for the 2D simulation, and the open source code OpenFOAM is adopted for the 3D calculation. Experimental and numerical results were presented on a typical case, in which the projectile moves with a quasi-constant axial speed. Simulation results agree well with experimental results. An analysis of the evolution of cavitating flow was performed, and the related physical mechanism was discussed. Results demonstrate that shedding cavity collapse plays an important role in the generation and acceleration of re-entry jet, which is the main reason for the instability of cloud cavitation. The 2D Reynolds-Averaged Navier–Stokes (RANS) method can represent the physical phenomena effectively. The 3D LES method can give an efficient simulation on the shedding vortices, and considerable accurate shapes of shedding cavities are captured.

Large‐Eddy Simulation of Three‐Dimensional Flow Structures Over Wave‐generated Ripples

2021 ◽  
Author(s):  
Chuang Jin ◽  
Giovanni Coco ◽  
Rafael O. Tinoco ◽  
Pallav Ranjan ◽  
Jorge San Juan ◽  
...  
Keyword(s):  
Large Eddy Simulation ◽  
Three Dimensional ◽  
Flow Structures ◽  
Three Dimensional Flow ◽  
Dimensional Flow ◽  
Eddy Simulation ◽  
Large Eddy

Numerical Study on Air-Reed Instruments With LES

2011 ◽  
Author(s):  
Kin’ya Takahashi ◽  
Masataka Miyamoto ◽  
Yasunori Ito ◽  
Toshiya Takami ◽  
Taizo Kobayashi ◽  
...  
Keyword(s):  
Numerical Study ◽  
Sound Field ◽  
Acoustic Analogy ◽  
Empirical Theory ◽  
Sound Sources ◽  
Aerodynamic Sound ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Semi Empirical ◽  
2D And 3D

The acoustic mechanisms of 2D and 3D edge tones and a 2D small air-reed instrument have been studied numerically with compressible Large Eddy Simulation (LES). Sound frequencies of the 2D and 3D edge tones obtained numerically change with the jet velocity well following Brown’s semi-empirical equation, while that of the 2D air-reed instrument behaves in a different manner and obeys the semi-empirical theory, so called Cremer-Ising-Coltman theory. We have also calculated aerodynamic sound sources for the 2D edge tone and the 2D air-reed instrument relying on Ligthhill’s acoustic analogy and have discussed similarities and differences between them. The sound source of the air-reed instrument is more localized around the open mouth compared with that of the edge tone due to the effect of the strong sound field excited in the resonator.

Large Eddy Simulation of Cross Flow in Pipe Junction

2018 ◽  
Author(s):  
Jiajun Chen ◽  
Yue Sun ◽  
Hang Zhang ◽  
Dakui Feng ◽  
Zhiguo Zhang
Keyword(s):  
Large Eddy Simulation ◽  
Stokes Equations ◽  
Numerical Study ◽  
Three Dimensional ◽  
Cross Flow ◽  
Exciting Force ◽  
Navier Stokes ◽  
Pipe Network ◽  
Eddy Simulation ◽  
Large Eddy

Mixing in pipe junctions can play an important role in exciting force and distribution of flow in pipe network. This paper investigated the cross pipe junction and proposed an improved plan, Y-shaped pipe junction. The numerical study of a three-dimensional pipe junction was performed for calculation and improved understanding of flow feature in pipe. The filtered Navier–Stokes equations were used to perform the large-eddy simulation of the unsteady incompressible flow in pipe. From the analysis of these results, it clearly appears that the vortex strength and velocity non-uniformity of centerline, can be reduced by Y-shaped junction. The Y-shaped junction not only has better flow characteristic, but also reduces head loss and exciting force. The results of the three-dimensional improvement analysis of junction can be used in the design of pipe network for industry.

Large eddy simulation of stratified mixing in a three-dimensional lock-exchange system

2009 ◽  
Vol 26 (3-4) ◽  
pp. 134-155 ◽  
Author(s):  
Tamay M. Özgökmen ◽  
Traian Iliescu ◽  
Paul F. Fischer
Keyword(s):  
Large Eddy Simulation ◽  
Three Dimensional ◽  
Exchange System ◽  
Eddy Simulation ◽  
Large Eddy
Sign in / Sign up

Export Citation Format

Share Document