Novel Thrust Foil Bearing With Pocket Grooves for Enhanced Static Performance

2021 ◽  
Vol 143 (11) ◽  
Author(s):  
Nguyen LaTray ◽  
Daejong Kim
Keyword(s):  
Film Thickness ◽  
Power Loss ◽  
High Speed ◽  
Thrust Bearing ◽  
Test Results ◽  
Foil Bearing ◽  
Load Carrying ◽  
Low Load ◽  
Static Performance ◽  
Foil Thrust Bearing

Abstract The integration of foil bearing technology into high-speed oil-free machines has been slow in progress, in part, due to the low load-carrying capacity of the foil thrust bearing. It is crucial this issue is addressed through innovative solutions without overcomplicating the bearing design because simplicity is one of the attractive features of the foil bearing. This work presents novel thrust foil bearing with taper-flat configuration and pocket grooves on the bearing top foil as a secondary pressure boosting mechanism. Parametric study of the pocket dimensions on a rigid bearing reveals that the bearing static performance is the most sensitive to the pocket angular span. Further two-dimensional fluid–structure interaction analyses on foil thrust bearing predict a reduction of power loss by 10% with increased average film thickness. Minimum film thickness also increases when the bearing is lightly loaded but it is reduced 20% at the taper-flat transition area under high loading condition. This issue can be overcome by using stiffer bump foil; however, this is not implemented in this work due to other design constraints. Test results at 90,000 rpm and 140,000 rpm show, by adding the pocket groove pattern on the top foil, the power loss is reduced by 16% compared to the traditional taper-flat configuration.

On the performance of foil thrust bearing with misaligned bearing runner

2017 ◽  
Vol 69 (2) ◽  
pp. 105-115 ◽  
Author(s):  
Abdelrasoul M. Gad
Keyword(s):  
High Speed ◽  
Thrust Bearing ◽  
Approximation Technique ◽  
Hydrodynamic Effect ◽  
Stable Operation ◽  
Content Type ◽  
Thrust Bearings ◽  
Load Carrying ◽  
Foil Thrust Bearing ◽  
Stiffness And Damping

Purpose Compliant foil thrust bearings are promising bearings for high-speed oil-free turbomachinery. However, most previous experimental and numerical approaches to investigate the performance of these bearings have ignored the effect of bearing runner misalignment. Therefore, this paper aims to evaluate the effects of static and dynamic angular misalignments of the bearing runner on the performance of a gas-lubricated foil thrust bearing. Design/methodology/approach The bearing runner is allowed a maximum angular misalignment that produces a minimum gas film thickness as low as 20 per cent of the nominal clearance. Then, the variations of bearing load carrying capacity, viscous power loss and stiffness and damping coefficients of the gas film with runner misalignment are thoroughly analyzed. The flow in the gas film is modeled with compressible Reynolds equation along with the Couette approximation technique, and the deformation of the compliant bearing is calculated with a robust analytical model. Small perturbations method is used to calculate the force and moment dynamic coefficients of the gas film. Findings The results show that misaligned foil thrust bearings are capable of developing a restoring moment sufficient enough to withstand the imposed misalignments. Furthermore, the enhanced hydrodynamic effect ensures a stable operation of the misaligned bearing, and the results highlighted the role of the compliant bearing structure to maintain foil bearing prominent features even at misaligned conditions. Originality/value The value of this study is the evaluation of the effects of runner angular misalignments on the static and dynamic characteristics of Generation II bump-type foil thrust bearing.

Theoretical Study on Static Performance of Double-Bump Foil Bearings

2021 ◽  
Author(s):  
Fangcheng Xu ◽  
Jianhua Chu ◽  
Wenlin Luan ◽  
Guang Zhao
Keyword(s):  
Finite Element ◽  
Film Thickness ◽  
Thrust Bearing ◽  
Load Capacity ◽  
Static Characteristics ◽  
Thrust Bearings ◽  
Foil Bearings ◽  
Foil Bearing ◽  
Static Performance ◽  
Initial Clearance

Abstract In this paper, single-bump foil models with different thickness and double-bump foil models with different initial clearances are established. The structural stiffness and equivalent viscous damping of double-bump foil and single-bump foil are analyzed by finite element simulation. The results show that the double-layer bump foil has variable stiffness and the displacement of the upper bump is greater than the initial gap when the two-layer bumps contact. A model for obtaining static characteristics of aerodynamic compliant foil thrust bearing is established on the basis of the stiffness characteristics of the double-bump foil. This paper solves gas Reynolds equation, the gas film thickness equation and the foil stiffness characteristic equation via the finite element method and the finite difference method. The static characteristics of the thrust bearings including the bearing pressure distribution, the gas film thickness and the friction power consumption have been obtained. The static characteristics of two kinds of foils have been compared and analyzed, and the effect of initial clearance on the static performance of double-bump foil bearings is studied. The results show that the double-bump foil structure can effectively improve the load capacity of thrust bearing. In addition, the static performance of double-bump foil thrust bearings is between the performance of the single-bump foil bearing and the double-bump foil bearing whose foil’s clearance is zero. The smaller the initial clearance is, the easier it will be to form a stable double-bump foil supporting structure.

Static and Dynamic Analysis of Multileaf Foil Journal Bearings Considering Misalignment Effects

1997 ◽  
Author(s):  
D. Sudheer Kumar Reddy ◽  
S. Swarnamani ◽  
B. S. Prabhu
Keyword(s):  
Film Thickness ◽  
Reynolds Equation ◽  
Performance Characteristics ◽  
Frictional Torque ◽  
Static And Dynamic Analysis ◽  
Foil Bearing ◽  
Deformation Equation ◽  
Load Carrying ◽  
Static Performance ◽  
Stiffness And Damping

Abstract In the present work the analysis of gas lubricated multileaf journal bearing has been presented. The two dimensional compressible Reynolds equation was solved to establish the pressure field in the clearance space of the bearing. Elastic deformation equation is coupled with the Reynolds equation to get the foil deflections and change in film thickness. The effect of bearing misalignment on foil bearing performance characteristics has been presented. The problem has been formulated using incremental finite element method. The effect of bearing misalignment on static performance characteristics like load carrying capacity, frictional torque, minimum film thickness and on dynamic characteristics in terms of stiffness and damping coefficients have been presented.

Experimental Studies on Air Foil Thrust Bearing Load Capabilities Considering the Effect of Foil Configuration

2015 ◽  
Vol 813-814 ◽  
pp. 1007-1011
Author(s):  
R.N. Ravikumar ◽  
K.J. Rathanraj ◽  
V. Arun Kumar
Keyword(s):  
High Speed ◽  
Thrust Bearing ◽  
Experimental Studies ◽  
Ambient Air ◽  
Outer Edge ◽  
Foil Thickness ◽  
Foil Bearings ◽  
Load Carrying ◽  
Turbo Machinery ◽  
Foil Thrust Bearing

Abstract. Foil bearings are self-acting hydrodynamics bearings used to support lightly loaded high speed rotating machinery. The advantages that they offer to process fluid lubricated machines usingworking fluid as a lubricant (ambient air) physically non-contacting high speed operation. Foil bearings have been considered as an alternative to conventional bearings with the capacity to cater for high-speeds and hostile environment (high temperature). However, the lack of load carrying capacity at relatively lower speeds limits their applications in heavy turbo machinery and as such are highly suitable in lightly loaded, high speed turbo machinery like small gas turbines.This paper discusses the design and assessment of dynamic characteristics in terms of load carrying capabilities as a function of speed, gap between the bearing and the runner as well as shape of foils for an air foil thrust bearing. The effects of various bearing parameters like foil thickness, number of foils fixed circumferentially and along the axis of rotation and with foil geometry configuration. Characteristics of performance defined essentially in terms of load carrying capabilities and static stiffness have been used for evaluation. Experiments were conducted both for angular foils (with inner edge height less than outer edge height) and square foils by varying number of foils. The experimental results shows that the effect of foil configuration enhances the load carrying capabilities of air foil thrust bearing.

Numerical and experimental studies on the thermal and static characteristics of multi-leaf foil thrust bearing

2021 ◽  
pp. 135065012110110
Author(s):  
Yu Guo ◽  
Yu Hou ◽  
Qi Zhao ◽  
Xionghao Ren ◽  
Shuangtao Chen ◽  
...  
Keyword(s):  
High Speed ◽  
Thrust Bearing ◽  
Load Capacity ◽  
Failure Process ◽  
Experimental Studies ◽  
Elastic Model ◽  
Static Characteristics ◽  
Bearing Load ◽  
Foil Thrust Bearing ◽  
Cooling Air

Foil bearing is considered to be a promising supporting technology in high-speed centrifugal machinery. Due to the high-speed shearing effect in the viscous lubricant film, heat generation could not be ignored. In this paper, a thermo-elastic model of the multi-leaf foil thrust bearing is proposed to predict its thermal and static characteristics. In the model, modified Reynolds equation, energy equation, and Kirchhoff equation are solved in a coupling way. The contact area between the foil and welding plate is taken into account. Besides, the effect of cooling air on the bearing temperature is investigated. The ultimate load capacity and transient overload failure process of the bearing is analyzed and discussed. The effect of rotation speed on the bearing temperature is more obvious than that of the bearing load. The bearing temperature drops obviously by introducing the cooling air, and the cooling effect is improved with the supply pressure. The transient overload failure of the bearing occurs when the bearing load exceeds the ultimate value.

Static Characteristics of Gas Foil Thrust Bearing Based on Gas Rarefaction Model

2015 ◽  
Author(s):  
Jiajia Yan ◽  
Guanghui Zhang ◽  
Zhansheng Liu ◽  
Fan Yang
Keyword(s):  
Film Thickness ◽  
Optimization Design ◽  
Reynolds Equation ◽  
Thrust Bearing ◽  
Rarefied Gas ◽  
Load Capacity ◽  
Structural Parameters ◽  
Lubricating Film ◽  
Lift Off ◽  
Foil Thrust Bearing

A modified Reynolds equation for bump type gas foil thrust bearing was established with consideration of the gas rarefaction coefficient. Under rarefied gas lubrication, the Knudsen number which was affected by the film thickness and pressure was introduced to the Reynolds equation. The coupled modified Reynolds and lubricating film thickness equations were solved using Newton-Raphson Iterative Method and Finite Difference Method. By calculating the load capacity for increasing rotor speeds, the lift-off speed under certain static load was obtained. Parametric studies for a series of structural parameters and assembled clearances were carried out for bearing optimization design. The results indicate that with gas rarefaction effect, the axial load capacity would be decreased, and the lift-off speed would be improved. The rarefied gas has a more remarkable impact under a lower rotating speed and a smaller foil compliance coefficient. When the assembled clearance of the thrust bearing rotor system lies in a small value, the lift-off speed increases dramatically as the assembled clearance decreases further. Therefore, the axial clearance should be controlled carefully in assembling the foil thrust bearing. It’s worth noting that the linear uniform bump foil stiffness model is not exact for large foil compliance ∼0.5, especially for lift-off speed analysis, due to ignoring the interaction between bumps and bending stiffness of the foil.

Hybrid Magnetic/Foil Bearing System for an Oil-Free Thrust Bearing Test Rig

2001 ◽  
Author(s):  
Thomas E. Russell ◽  
Crystal Heshmat ◽  
Dennis Locke
Keyword(s):  
Magnetic Material ◽  
Control System ◽  
Thrust Bearing ◽  
Material Selection ◽  
System Stability ◽  
Electronic Control ◽  
Test Rig ◽  
Foil Bearing ◽  
Electronic Control System ◽  
Foil Thrust Bearing

A novel, high-speed, high temperature, oil-free, foil thrust bearing test rig has been developed with a critical element being a double-acting, active magnetic thrust bearing. The magnetic thrust bearing is used to react against loads applied to the foil thrust bearing under test. The magnetic bearing has the capability of reacting against thrust loads of up to 2224 N (500 pounds) at speeds to 80,000 rpm, while the rotor is supported by foil journal bearings. Two issues that are especially challenging for this test rig are magnetic material selection and the electronic control system. The magnetic material selection is critical due to the high centrifugal stresses that occur at 80,000 rpm. The electronic control system must handle the non-linear variation in stiffness and damping that is seen by the magnetic thrust bearing as the foil thrust bearing is loaded, as well as maintain rotor system stability as the foil bearing is purposefully overloaded to the point of failure to discover maximum load and performance capabilities. This paper describes the design of the active magnetic thrust bearing, the material selection process, and the development of a digital signal processor based control system. Typical experimental data obtained during operation of the test rig will also be presented.

Influence of geometric parameters on the bump foil bearing performance

2019 ◽  
Vol 234 (7) ◽  
pp. 1017-1026
Author(s):  
Sadanand Kulkarni ◽  
Soumendu Jana
Keyword(s):  
Carrying Capacity ◽  
High Speed ◽  
System Development ◽  
Load Capacity ◽  
Radial Clearance ◽  
Load Carrying Capacity ◽  
Foil Bearings ◽  
Foil Bearing ◽  
Load Carrying ◽  
Lift Off

High-speed rotating system development has drawn considerable attention of the researchers, in the recent past. Foil bearings are one of the major contenders for such applications, particularly for high speed and low load rotating systems. In foil bearings, process fluid or air is used as the working medium and no additional lubricant is required. It is known from the published literature that the load capacity of foil bearings depend on the operating speed, viscosity of the medium, clearance, and stiffness of the foil apart from the geometric dimensions of the bearing. In case of foil bearing with given dimensions, clearance governs the magnitude of pressure developed, whereas stiffness dictates the change in radial clearance under the generated pressure. This article deals with the effect of stiffness, clearance, and its interaction on the bump foil bearings load-carrying capacity. For this study, four sets of foil bearings of the same geometry with two levels of stiffness and clearance values are fabricated. Experiments are carried out following two factor-two level factorial design approach under constant load and in each case, the lift-off speed is measured. The experimental output is analyzed using statistical techniques to evaluate the influence of parameters under consideration. The results indicate that clearance has the maximum influence on the lift-off speed/ load-carrying capacity, followed by interaction effect and stiffness. A regression model is developed based on the experimental values and model is validated using error analysis technique.

Thermal Analysis and Test for a High Speed PM Machine for Fan Application

2011 ◽  
Vol 383-390 ◽  
pp. 4727-4734 ◽  
Author(s):  
Ji Qiang Wang ◽  
Feng Xiang Wang
Keyword(s):  
Thermal Analysis ◽  
Temperature Rise ◽  
Power Loss ◽  
High Speed ◽  
Heat Dissipation ◽  
Machine Design ◽  
Test Results ◽  
Power Losses ◽  
Running Speed ◽  
High Speed Machine

For a give air flux, the higher speed the fanner is running, the smaller the fanner’s size is. It is also well known that for a given power, the higher the machine’s running speed, the smaller the machine’s size has. If the fanner is geared to a high speed machine directly, the fan set’s volume will be sharply decreased. However, the heat dissipation of the high speed machine becomes a serious problem also due to the small size and high power loss density. Therefore, how to estimate accurately the power losses and temperature rise is a key issue for the high speed machine design. In this paper, the power losses and temperature of high speed PM machine for a fanner application are thoroughly investigated. And the test results of a prototype fan set partly shown the validity of the calculation method.

The Influence of Ambient Pressure on the Measured Load Capacity of Bump-Foil and Spiral-Groove Gas Thrust Bearings at Ambient Pressures up to 69 Bar on a Novel High-Pressure Gas Bearing Test Rig

2019 ◽  
Author(s):  
Jason Wilkes ◽  
Ryan Cater ◽  
Erik Swanson ◽  
Kevin Passmore ◽  
Jerry Brady
Keyword(s):  
Power Loss ◽  
Thrust Bearing ◽  
Load Capacity ◽  
Ambient Pressure ◽  
Spiral Groove ◽  
Test Rig ◽  
Thrust Bearings ◽  
Order Of Magnitude ◽  
Foil Thrust Bearing ◽  
Thrust Load

Abstract This paper will show the influence of ambient pressure on the thrust capacity of bump-foil and spiral-groove gas thrust bearings. The bearings were operating in nitrogen at various pressures up to 69 bar, and were tested to failure. Failure was detected at various pressures by incrementally increasing the thrust load applied to the thrust bearing until the bearing was no longer thermally stable, or until contact was observed by a temperature spike measured by thermocouples within the bearing. These tests were performed on a novel thrust bearing test rig that was developed to allow thrust testing at pressures up to 207 bar cavity pressure at 260°C while rotating at speeds up to 120,000 rpm. The test rig floats on hydrostatic air bearings to allow for the direct measurement of applied thrust load through linkages that connect the stationary thrust loader to the rotor housing. Test results on a 65 mm (2.56 in) bump-foil thrust bearing at 100 krpm show a marked increase in load capacity with gas density, which has not previously been shown experimentally. Results also show that the load capacity of a similarly sized spiral-groove thrust bearing are relatively insensitive to pressure, and supported an order-of-magnitude less load than that observed for the bump-foil thrust bearing. These results are compared with analytical predictions, which agree reasonably with the experimental results. Predicted power loss is also presented for the bump-foil bearing; however, measured power loss was substantially higher.

Sign in / Sign up

Export Citation Format

Share Document