A Modified Chezy Formula for One-Dimensional Unsteady Frictional Resistance in Open Channel Flow

2021 ◽  
Vol 143 (5) ◽  
Author(s):  
Junwei Zhou ◽  
Weimin Bao ◽  
Geoffrey R. Tick ◽  
Hamed Moftakhari ◽  
Yu Li ◽  
...  
Keyword(s):  
Unsteady Flow ◽  
Frictional Resistance ◽  
Mitigation Strategies ◽  
Flood Routing ◽  
Flood Events ◽  
Complex Flow ◽  
Cross Sectional ◽  
Friction Resistance ◽  
Flow Unsteadiness ◽  
Better Than

Abstract It has been observed in literature that for unsteady flow conditions the one-to-one relationships between flow depth, cross-sectional averaged velocity, and frictional resistance as determined from steady uniform flow cases may not be appropriate for these more complex flow systems. Thus, a general friction resistance formula needs to be modified through the addition of new descriptive terms to account for flow unsteadiness, in order to eliminate errors due to uniform and steady-flow assumptions. An extended Chezy formula incorporating both time and space partial derivatives of hydraulic parameters was developed using dimensional analysis to investigate the relationship between flow unsteadiness and friction resistance. Results show that the proposed formula performs better than the traditional Chezy formula for simulating real hydrograph cases whereby both formula coefficients are individually identified for each flood event and coefficients are predetermined using other flood events as calibration cases. Although the extended Chezy formula as well as the original Chezy formula perform worse with the increasing degree of flow unsteadiness, its results are less dramatically affected by unsteadiness intensity, thereby improving estimations of flood routing. As a result, it tends to perform much better than traditional Chezy formula for severe flood events. Under more complex conditions whereby peak flooding events may occur predominantly under unsteady flow, the extended Chezy model may provide as a valuable tool for researchers, practitioners, and water managers for assessing and predicting impacts for flooding and for the development of more appropriate mitigation strategies and more accurate risk assessments.

scholarly journals Analysis of Aspect Ratio in a Miniature Rectangle Channel for Low Frictional Resistance

Micromachines ◽  
2021 ◽  
Vol 12 (12) ◽  
pp. 1580
Author(s):  
Takashi Fukuda ◽  
Makoto Ryo Harada
Keyword(s):  
Surface Roughness ◽  
Reynolds Number ◽  
Aspect Ratio ◽  
Rectangular Channel ◽  
Frictional Resistance ◽  
Experimental System ◽  
Cross Sectional ◽  
Friction Resistance ◽  
Calculation Results ◽  
Volume Range

We conducted a theoretical investigation of the cross-sectional aspect ratio of a rectangular channel to have sufficiently low frictional resistance under less than 150 of the Reynolds number. From the theoretical consideration, it was clarified that 3.40 or more is recommended as a criterion for determining the aspect ratio. This addresses the problem of determining the interval of rectangle channels, installed in a plate reactor. There is a concern that the real system does not follow the analytical solution, assuming laminar flow, since the higher aspect ratio leads to disturbances of the flow such as the emergence of vortices. However, in the channel’s volume range of (W × H × L) = (7.0 mm × 0.38 mm × 0.26 m), such a turbulence was not observed in the detailed numerical calculation by CFD, where both calculation results were in agreement to within 3% accuracy. Moreover, even in an experimental system with a surface roughness of ca. 7%, friction resistance took agreement within an accuracy of ±30%.

Characterization of Rh/Si multilayer structure by HREM and HAADF

1992 ◽  
Vol 50 (1) ◽  
pp. 122-123
Author(s):  
Y. Cheng ◽  
J. Liu ◽  
M.B. Stearns ◽  
D.G. Steams
Keyword(s):  
Normal Incidence ◽  
High Resolution Electron Microscopy ◽  
X Rays ◽  
Beam Direction ◽  
Cross Sectional ◽  
Optical Elements ◽  
Resolution Electron ◽  
Point To Point ◽  
Better Than

The Rh/Si multilayer (ML) thin films are promising optical elements for soft x-rays since they have a calculated normal incidence reflectivity of ∼60% at a x-ray wavelength of ∼13 nm. However, a reflectivity of only 28% has been attained to date for ML fabricated by dc magnetron sputtering. In order to determine the cause of this degraded reflectivity the microstructure of this ML was examined on cross-sectional specimens with two high-resolution electron microscopy (HREM and HAADF) techniques.Cross-sectional specimens were made from an as-prepared ML sample and from the same ML annealed at 298 °C for 1 and 100 hours. The specimens were imaged using a JEM-4000EX TEM operating at 400 kV with a point-to-point resolution of better than 0.17 nm. The specimens were viewed along Si [110] projection of the substrate, with the (001) Si surface plane parallel to the beam direction.

STUDY ON THRIVE SCORE IN THE PROGNOSIS OF ISCHEMIC STROKE

2017 ◽  
pp. 22-24
Author(s):  
Thi Thao Nhi Tran ◽  
Dinh Toan Nguyen
Keyword(s):  
Ischemic Stroke ◽  
Clinical Outcome ◽  
Regression Models ◽  
Cross Sectional Study ◽  
High Rate ◽  
Vascular Events ◽  
Cross Sectional ◽  
Key Words Ischemic Stroke ◽  
Outcome Mortality ◽  
Better Than

Background and Purpose: Stroke is the second cause of mortality and the leading cause of disability. Using the clinical scale to predict the outcome of the patient play an important role in clinical practice. The Totaled Health Risks in Vascular Events (THRIVE) score has shown broad utility, allowing prediction of clinical outcome and death. Methods: A cross-sectional study conducting on 102 patients with acute ischemic stroke using THRIVE score. The outcome of patient was assessed by mRankin in the day of 30 after stroke. Statistic analysis using SPSS 15.0. Results: There was 60.4% patient in the group with THRIVE score 0 – 2 points having a good outcome (mRS 0 - 2), patient group with THRIVE score 6 - 9 having a high rate of bad outcome and mortality. Having a positive correlation between THRIVE score on admission and mRankin score at the day 30 after stroke with r = 0.712. THRIVE score strongly predicts clinical outcome with ROC-AUC was 0.814 (95% CI 0.735 - 0.893, p<0.001), Se 69%, Sp 84% and the cut-off was 2. THRIVE score strongly predicts mortality with ROC-AUC was 0.856 (95% CI 0.756 - 0.956, p<0.01), Se 86%, Sp 77% and the cut-off was 3. Analysis of prognostic factors by multivariate regression models showed that THRIVE score was only independent prognostic factor for the outcome of post stroke patients. Conclusions: The THRIVE score is a simple-to-use tool to predict clinical outcome, mortality in patients with ischemic stroke. Despite its simplicity, the THRIVE score performs better than several other outcome prediction tools. Key words: Ischemic stroke, THRIVE, prognosis, outcome, mortality

scholarly journals Multi-country cross-sectional study of colonization with multidrug-resistant organisms: protocol and methods for the Antibiotic Resistance in Communities and Hospitals (ARCH) studies

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Aditya Sharma ◽  
Ulzii-Orishikh Luvsansharav ◽  
Prabasaj Paul ◽  
Joseph D. Lutgring ◽  
Douglas R. Call ◽  
...  
Keyword(s):  
Risk Factors ◽  
Multidrug Resistant ◽  
Population Based ◽  
Community Dwelling ◽  
Mitigation Strategies ◽  
Invasive Infection ◽  
Cross Sectional ◽  
Global Epidemiology ◽  
Multidrug Resistant Organisms ◽  
High Threat

Abstract Background Antimicrobial resistance is a global health emergency. Persons colonized with multidrug-resistant organisms (MDROs) are at risk for developing subsequent multidrug-resistant infections, as colonization represents an important precursor to invasive infection. Despite reports documenting the worldwide dissemination of MDROs, fundamental questions remain regarding the burden of resistance, metrics to measure prevalence, and determinants of spread. We describe a multi-site colonization survey protocol that aims to quantify the population-based prevalence and associated risk factors for colonization with high-threat MDROs among community dwelling participants and patients admitted to hospitals within a defined population-catchment area. Methods Researchers in five countries (Bangladesh, Chile, Guatemala, Kenya, and India) will conduct a cross-sectional, population-based prevalence survey consisting of a risk factor questionnaire and collection of specimens to evaluate colonization with three high-threat MDROs: extended-spectrum cephalosporin-resistant Enterobacteriaceae (ESCrE), carbapenem-resistant Enterobacteriaceae (CRE), and methicillin-resistant Staphylococcus aureus (MRSA). Healthy adults residing in a household within the sampling area will be enrolled in addition to eligible hospitalized adults. Colonizing isolates of these MDROs will be compared by multilocus sequence typing (MLST) to routinely collected invasive clinical isolates, where available, to determine potential pathogenicity. A colonizing MDRO isolate will be categorized as potentially pathogenic if the MLST pattern of the colonizing isolate matches the MLST pattern of an invasive clinical isolate. The outcomes of this study will be estimates of the population-based prevalence of colonization with ESCrE, CRE, and MRSA; determination of the proportion of colonizing ESCrE, CRE, and MRSA with pathogenic characteristics based on MLST; identification of factors independently associated with ESCrE, CRE, and MRSA colonization; and creation an archive of ESCrE, CRE, and MRSA isolates for future study. Discussion This is the first study to use a common protocol to evaluate population-based prevalence and risk factors associated with MDRO colonization among community-dwelling and hospitalized adults in multiple countries with diverse epidemiological conditions, including low- and middle-income settings. The results will be used to better describe the global epidemiology of MDROs and guide the development of mitigation strategies in both community and healthcare settings. These standardized baseline surveys can also inform future studies seeking to further characterize MDRO epidemiology globally.

scholarly journals Six ultraviolet minutes for cleaner operating theatres

2020 ◽  
Vol 30 (Supplement_5) ◽  
Author(s):  
R Bosco ◽  
S Gambelli ◽  
V Urbano ◽  
G Cevenini ◽  
G Messina
Keyword(s):  
Cross Sectional Study ◽  
Cross Sectional ◽  
Before And After ◽  
Operating Theatres ◽  
Cleaning Procedures ◽  
The Difference ◽  
Contamination Levels ◽  
Different Levels ◽  
Better Than ◽  
Final Cleaning

Abstract Background Sanitizing the operating theatres (OT) is important to minimize risk of post-operative infections. Disinfection procedures between one operation and another is less aggressive than final cleaning procedures, at the end of the day. Aim was assessing the difference of contamination: i) between different levels of disinfection; ii) before and after the use of a UVC Device (UVC-D). Methods Between December 2019/February 2020 a cross sectional study was conducted in OT in a real clinical context. 94 Petri dishes (PD) were used in 3 OT. Three different sanitation levels (SL1-3) were compared pre- and post-use of UVC-D: i) No cleaning after surgery (SL1); ii) after in-between cleaning (SL2); iii) after terminal cleaning (SL3). UVC-D was employed for 6 minutes, 3 minutes per bed side. PD were incubated at 36 °C and colony forming unit (CFU) counted at 48h. Descriptive statistic, Wilcoxon and Mann-Whitney tests were performed to assess the contamination levels in total, pre/post use of UVC-D, and between different sanitation levels, respectively. Results In total we had a mean of 3.39 CFU/PD (C.I. 2.05 - 4.74) and a median of 1 CFU/PD (Min. 0 - Max. 39), after UVC-D use we had a mean of 2.20 CFU/PD (C.I. 0.69 - 5.09) and a median of 0 CFU/PD (Min. 0 - Max. 133). The UVC-D led to a significant reduction of CFU (p &lt; 0.001). Without UVC-D we had a significant CFU drop (p &lt; 0.05) between SL1 and SL3. Using UVC-D, we observed significant reductions of contamination (p &lt; 0.05) between SL3 and SL1. Comparing SL1 (median 0) post UVC-D use vs SL2 pre UVC-D use (median 0.5), and SL2 post UVC-D use (median 0) vs SL3 pre UVC-D use (median 1) we had a significant reduction of contamination (p &lt; 0.05). Conclusions UVC-D improved environmental contamination in any of the three sanitation levels. Furthermore, the use of UVC-D alone was better than in-between and terminal cleaning. Although these encouraging results, the cleaning procedures executed by dedicated staff has to be considered. Key messages UVC are efficient to decrease contamination in operating theatres regardless of sanitation levels. The additional use of UVC technology to standard cleaning procedures significantly improves sanitation levels.

The Influence of Annealing Temperature on the Characteristics of 0.95 (Na0.5Bi0.5)TiO3-0.05 BaTiO3 Thin Films

2010 ◽  
Vol 434-435 ◽  
pp. 263-266
Author(s):  
Chien Chen Diao ◽  
Chia Ching Wu ◽  
Cheng Fu Yang ◽  
Chao Chin Chan
Keyword(s):  
Thin Films ◽  
Deposition Process ◽  
Leakage Currents ◽  
Cross Sectional ◽  
Si Substrates ◽  
Polarization Characteristics ◽  
Magnetron Sputter ◽  
Xrd Patterns ◽  
Top View ◽  
Better Than

In this study, 0.95 (Na0.5Bi0.5)TiO3-0.05 BaTiO3 + 1 wt% Bi2O3 (NBT-BT3) composition sintered at 1200oC for 2h is used as target to deposit the NBT-BT3 thin films. The excess 1wt% Bi2O3 is used to compensate the vaporization of Bi2O3 during the deposition process. Ferroelectric NBT-BT3 thin films are deposited on SiO2/Si and Pt/Ti/SiO2/Si substrates using RF magnetron sputter method using the ceramic target fabricated by ourselves. After depositing under the optimal parameters, the thin films are then heated by a conventional thermal annealing (CFA) process conducted in air at temperatures ranging from 600- 800oC for 60min. The morphologies of NBT- BT3 thin films are observed using SEM the crystalline structures of NBT-BT3 thin films are investigated using XRD patterns. The large memory window and stable leakage current density examination reveals that NBT-BT3 thin films annealed on 600oC are better than other thin films under different CTA temperatures. Finally, the top view and cross-sectional images of SEM, memory windows, leakage currents and polarization characteristics of NBT-BT3 thin films are also well developed.

Getting Time Right: Using Cox Models and Probabilities to Interpret Binary Panel Data

2021 ◽  
pp. 1-16
Author(s):  
Shawna K. Metzger ◽  
Benjamin T. Jones
Keyword(s):  
Transition Probabilities ◽  
Cox Model ◽  
Interstate Conflict ◽  
Cross Sectional ◽  
Cox Models ◽  
Binary Time Series ◽  
Covariate Effects ◽  
New Interpretation ◽  
New Evidence ◽  
Better Than

Abstract Logit and probit (L/P) models are a mainstay of binary time-series cross-sectional (BTSCS) analyses. Researchers include cubic splines or time polynomials to acknowledge the temporal element inherent in these data. However, L/P models cannot easily accommodate three other aspects of the data’s temporality: whether covariate effects are conditional on time, whether the process of interest is causally complex, and whether our functional form assumption regarding time’s effect is correct. Failing to account for any of these issues amounts to misspecification bias, threatening our inferences’ validity. We argue scholars should consider using Cox duration models when analyzing BTSCS data, as they create fewer opportunities for such misspecification bias, while also having the ability to assess the same hypotheses as L/P. We use Monte Carlo simulations to bring new evidence to light showing Cox models perform just as well—and sometimes better—than logit models in a basic BTSCS setting, and perform considerably better in more complex BTSCS situations. In addition, we highlight a new interpretation technique for Cox models—transition probabilities—to make Cox model results more readily interpretable. We use an application from interstate conflict to demonstrate our points.

Aortic root measurement on CT: linear dimensions, aortic root area and comparison with echocardiography. A retrospective cross sectional study

2021 ◽  
Vol 94 (1121) ◽  
pp. 20201232
Author(s):  
Kai'En Leong ◽  
Henry Knipe ◽  
Simon Binny ◽  
Heather Pascoe ◽  
Nathan Better ◽  
...  
Keyword(s):  
Aortic Root ◽  
Intraclass Correlation ◽  
Maximal Dimension ◽  
Short Axis ◽  
Cross Sectional ◽  
Root Area ◽  
Linear Dimensions ◽  
Root Measurement ◽  
Better Than ◽  
Excellent Reproducibility

Objective: We sought to assess the different CT aortic root measurements and determine their relationship to transthoracic echocardiography (TTE). Methods: TTE and ECG-gated CT images were reviewed from 70 consecutive patients (mean age 54 ± 18 years; 67% male) with tricuspid aortic roots (trileaflet aortic valves) between Nov 2009 and Dec 2013. Three CT planes (coronal, short axis en face and three-chamber) were used for measurement of nine linear dimensions. TTE aortic root dimension was measured as per guidelines from the parasternal long axis view. Results: All CT short axis measurements of the aortic root had excellent reproducibility (intraclass correlation coefficient, ICC 0.96–0.99), while coronal and three-chamber planes had lower reproducibility with ICC 0.90 (95% CI 0.84–0.94) and ICC 0.92 (0.87–0.95) respectively. CT coronal and short axis maximal dimensions were systematically larger than TTE (mean 2 mm larger, p < 0.001), while CT cusp to commissure measurements were systematically smaller (CT RCC-comm mean 2 mm smaller than TTE, p < 0.001). All CT short axis measurements had excellent correlation with aortic root area with CT short axis maximal dimension marginally better than the rest (Pearson’s R 0.97). Conclusion: Systematic differences exist between CT and TTE dependent on the CT plane of measurement. All CT short axis measurements of the aortic root had excellent reproducibility and correlation with aortic root area with maximal dimension appearing marginally better than the rest. Our findings highlight the importance of specifying the chosen plane of aortic root measurement on CT. Advances in knowledge: Systematic differences in aortic root dimension exist between TTE and the various CT measurement planes. CT coronal and short axis maximal dimensions were systematically larger than TTE, while CT cusp to commissure measurements were smaller. CT readers should indicate the plane of measurement and the specific linear dimension to avoid ambiguity in follow-up and comparison.

scholarly journals Trends and Inequalities in the Incidence of Acute Myocardial Infarction among Beijing Townships, 2007–2018

2021 ◽  
Vol 18 (23) ◽  
pp. 12276
Author(s):  
Jie Chang ◽  
Qiuju Deng ◽  
Moning Guo ◽  
Majid Ezzati ◽  
Jill Baumgartner ◽  
...  
Keyword(s):  
Myocardial Infarction ◽  
Acute Myocardial Infarction ◽  
Urban Areas ◽  
Disease Surveillance ◽  
Temporal Trends ◽  
Relative Increase ◽  
Mitigation Strategies ◽  
Middle Aged ◽  
Geographic Variations ◽  
Cross Sectional

Acute myocardial infarction (AMI) poses a serious disease burden in China, but studies on small-area characteristics of AMI incidence are lacking. We therefore examined temporal trends and geographic variations in AMI incidence at the township level in Beijing. In this cross-sectional analysis, 259,830 AMI events during 2007–2018 from the Beijing Cardiovascular Disease Surveillance System were included. We estimated AMI incidence for 307 consistent townships during consecutive 3-year periods with a Bayesian spatial model. From 2007 to 2018, the median AMI incidence in townships increased from 216.3 to 231.6 per 100,000, with a greater relative increase in young and middle-aged males (35–49 years: 54.2%; 50–64 years: 33.2%). The most pronounced increases in the relative inequalities was observed among young residents (2.1 to 2.8 for males and 2.8 to 3.4 for females). Townships with high rates and larger relative increases were primarily located in Beijing’s northeastern and southwestern peri-urban areas. However, large increases among young and middle-aged males were observed throughout peri-urban areas. AMI incidence and their changes over time varied substantially at the township level in Beijing, especially among young adults. Targeted mitigation strategies are required for high-risk populations and areas to reduce health disparities across Beijing.

Sign in / Sign up

Export Citation Format

Share Document