A Dynamically Balanced Kinematically Redundant Planar Parallel Robot

2020 ◽  
pp. 1-12
Author(s):  
Nicholas Baron ◽  
Andrew Philippides ◽  
Nicolas Rojas
Keyword(s):  
Parallel Architecture ◽  
Parallel Manipulators ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Simulation Software ◽  
High Speeds ◽  
Balancing Conditions ◽  
Multi Body ◽  
Body Dynamic ◽  
Very High

Abstract A dynamically balanced robotic manipulator does not exert forces or moments onto the base on which it is fixed; this can be important for the performance of parallel robots as they are able to move at very high speeds, albeit usually have a reduced workspace. In recent years, kinematically redundant architectures have been proposed to mitigate the workspace limitations of parallel manipulators and increase their rotational capabilities; however, dynamically balanced versions of these architectures have not yet been presented. In this paper, a dynamically balanced kinematically redundant planar parallel architecture is introduced. The manipulator is composed of parallelogram linkages which reduces the number of counter rotary-elements required to moment balance the mechanism. The balancing conditions are derived, and the balancing parameters are optimised using Lagrange multipliers, such that the total mass and inertia of the system is minimised. The elimination of the shaking forces and moments is then verified via a simulation in the multi-body dynamic simulation software MSC Adams.

Clearance-Induced Position Uncertainty of Planar Linkages and Parallel Manipulators

2017 ◽  
Author(s):  
Kwun-Lon Ting ◽  
Kuan-Lun Hsu
Keyword(s):  
Kinematic Model ◽  
Parallel Manipulators ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Position Uncertainty ◽  
Joint Clearances ◽  
Planar Linkages ◽  
Oscillation Characteristics ◽  
Linkage Model ◽  
Input Error

The paper presents a simple and effective kinematic model and methodology, based on Ting’s N-bar rotatability laws [2629], to assess the extent of the position uncertainty caused by joint clearances for any linkage and manipulators connected with revolute or prismatic pairs. The model is derived and explained with geometric rigor based on Ting’s rotatability laws. The significant contribution includes (1) the clearance link model for P-joint that catches the translation and oscillation characteristics of the slider within the clearance and separates the geometric effect of clearance from the input error, (2) a simple uncertainty linkage model that features a deterministic instantaneous structure mounted on non-deterministic flexible legs, (3) the generality of the method, which is effective for multiloop linkages and parallel manipulators. The discussion is carried out through symmetrically constructed planar eight-bar parallel robots. It is found that the uncertainty region of a three-leg parallel robot is enclosed by a hexagon, while that of its serial counterpart is enclosed by a circle inscribed by the hexagon. A numerical example is also presented. The finding and proof, though only based on three-leg planar 8-bar parallel robots, may have a wider implication suggesting that based on kinematics, parallel robots tends to inherit more position uncertainty than their serial counterparts. The use of more loops in parallel robots cannot fully offset the adverse effect on position uncertainty caused by the use of more joints.

DeltaBot: A New Cable-Based Ultra High Speed Robot

2003 ◽  
Author(s):  
Saeed Behzadipour ◽  
Robert Dekker ◽  
Amir Khajepour ◽  
Edmon Chan
Keyword(s):  
High Speed ◽  
Degrees Of Freedom ◽  
Manufacturing Industry ◽  
Design Procedure ◽  
Parallel Manipulators ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Manufacturing Cost ◽  
End Effector ◽  
Serial Manipulators

The growing needs for high speed positioning devices in the automated manufacturing industry have been challenged by robotic science for more than two decades. Parallel manipulators have been widely used for this purpose due to their advantage of lower moving inertia over the conventional serial manipulators. Cable actuated parallel robots were introduced in 1980’s to reduce the moving inertia even further. In this work, a new cable-based parallel robot is introduced. For this robot, the cables are used not only to actuate the end-effector but also to apply the necessary kinematic constraints to provide three pure translational degrees of freedom. In order to maintain tension in the cables, a passive air cylinder is used to push the end-effector against the stationary platform. In addition to low moving inertia, the new design benefits from simplicity and low manufacturing cost by eliminating joints from the robot’s mechanism. The design procedure and the results of experiments will be discussed in the following.

The Manta and the Kanuk: Novel 4-DOF Parallel Mechanisms for Industrial Handling

1999 ◽  
Author(s):  
Luc H. Rolland
Keyword(s):  
Parallel Mechanism ◽  
Kinematic Chain ◽  
Parallel Robot ◽  
Chain Structure ◽  
Parallel Robots ◽  
Parallel Mechanisms ◽  
End Effector ◽  
Low Mass ◽  
Loading And Unloading ◽  
Very High

Abstract Two novel 4-DOF very fast parallel robots were designed. This paper introduces the new parallel mechanism designs which are named the Manta and the Kanuk. In order to reduce manipulator overall costs, the actuator and encoder numbers are minimized to the exact effective degrees-of-freedoms (DOF) which is usually not the case in most parallel robot designs. The robots allow end-effector displacements along the three Cartesian translations and one platform transversal rotation. The two remaining rotations are blocked by the intrinsic mechanical structure including the rotation along the platform normal which is always limited in range. The main advantages are high stiffness through the multiple kinematic chain structure which allow for low mass designs. Moreover, they feature simple mechanical construction. Thus, it shall be possible to achieve very high throughput since high accelerations are feasible. To circumvent the known workspace limitations, the actuators were selected to be prismatic along linear axes. The applications are automated warehouse manipulation, mediatheque manipulation, machine tool tool changers, loading and unloading.

Six degrees of freedom parallel robots with C5 links

Robotica ◽  
1992 ◽  
Vol 10 (1) ◽  
pp. 35-44 ◽  
Author(s):  
Y. Amirat ◽  
F. Artigue ◽  
J. Pontnau
Keyword(s):  
Automotive Industry ◽  
Kinematic Analysis ◽  
Degrees Of Freedom ◽  
Parallel Architecture ◽  
Parallel Robot ◽  
Parallel Architectures ◽  
Parallel Robots ◽  
Left Hand ◽  
Six Degrees Of Freedom ◽  
Assembly Tasks

SummaryThis paper presents at first a static and kinematic analysis of closed chains mechanisms which permits to deduce different possible fully parallel architectures. Then we focus on a particular parallel architecture with C5 links designed to perform precise assembly tasks. A general modeling of this C5 parallel robot is presented. Two typical assembly tasks in the automotive industry are also proposed; the first one uses the C5 links parallel robot as a left-hand device, while the second one uses it as the terminal tool of a sequential manipulator.

Actuation Redundancy as a Way to Improve the Acceleration Capabilities of 3T and 3T1R Pick-and-Place Parallel Manipulators

2010 ◽  
Vol 2 (4) ◽  
Author(s):  
David Corbel ◽  
Marc Gouttefarde ◽  
Olivier Company ◽  
François Pierrot
Keyword(s):  
Dynamic Model ◽  
Dynamic Capabilities ◽  
Robot Manipulators ◽  
Parallel Manipulators ◽  
Parallel Robot ◽  
Actuation Redundancy ◽  
High Acceleration ◽  
Pick And Place ◽  
Very High

This paper analyzes the possible contribution of actuation redundancy in obtaining very high acceleration with parallel robot manipulators. This study is based on redundant and nonredundant Delta/Par4-like manipulators, which are frequently used for pick-and-place applications, and addresses the cases of translational manipulators (also called 3T manipulators) and manipulators with Schoenflies motions (also called 3T1R manipulators). A dynamic model, valid for both redundant and nonredundant manipulators, is used to analyze the moving platform’s acceleration capabilities: (i) at zero speed and in any direction and (ii) at zero speed in the “best” direction. The results show that actuation redundancy makes it possible to homogenize dynamic capabilities throughout the workspace and to increase the moving platform’s accelerations. Designs of redundant Delta/Par4-like manipulators capable of high acceleration pick-and-place trajectories are presented for both 3T and 3T1R manipulators.

Types Synthesis of Redundant Actuation Parallel Robot

2011 ◽  
Vol 219-220 ◽  
pp. 953-956
Author(s):  
Jin Liang Gong ◽  
Yan Fei Zhang ◽  
Xiu Ting Wei
Keyword(s):  
Parallel Manipulators ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Redundant Actuation ◽  
View Point ◽  
Output Link ◽  
Practical Applications ◽  
Plücker Coordinates ◽  
Theoretical View ◽  
Kinematic Joint

Redundant parallel robots have been under increasing developments from a theoretical view point as well as for practical applications. Compared with the traditional parallel manipulators, they have such merits of more load, faster speed and higher accuracy. The method about how to build up redundant actuation parallel robot is introduced. Considering that the kinematic joint and limb are basic elements to constitute a proper parallel robot mechanism, special Plücker coordinates is adopted to describe the displacements of the output link of a limb or the robot mechanism. Then the principle for design of the redundant actuation parallel robot mechanisms is presented and example of the 2RRR&2PP parallel robot mechanism is brought forth and analyzed by this method.

Kinematic Isotropic Configuration of Spatial Cable-Driven Parallel Robots

2011 ◽  
Vol 1 (4) ◽  
pp. 61-86
Author(s):  
Hamoon Hadian ◽  
Abbas Fattah
Keyword(s):  
Parallel Manipulators ◽  
Parallel Robot ◽  
Numerical Approach ◽  
Parallel Robots ◽  
Degree Of Freedom ◽  
Tension Index ◽  
Symbolic Method ◽  
Three Degree Of Freedom ◽  
Cable Robots

In this paper, the authors study the kinematic isotropic configuration of spatial cable-driven parallel robots by means of four different methods, namely, (i) symbolic method, (ii) geometric workspace, (iii) numerical workspace and global tension index (GTI), and (iv) numerical approach. The authors apply the mentioned techniques to two types of spatial cable-driven parallel manipulators to obtain their isotropic postures. These are a 6-6 cable-suspended parallel robot and a novel restricted three-degree-of-freedom cable-driven parallel robot. Eventually, the results of isotropic conditions of both cable robots are compared to show their applications.

Actuation-Coordinated Mobile Parallel Robots With Hybrid Mobile and Manipulation Function

2021 ◽  
Author(s):  
Dongming Gan ◽  
Jiaming Fu ◽  
Mo Rastgaar ◽  
Byung-Cheol Min ◽  
Richard Voyles
Keyword(s):  
Parallel Mechanism ◽  
Inverse Dynamics ◽  
Parallel Manipulators ◽  
Extreme Environment ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Mobile Manipulators ◽  
Large Area ◽  
Base Size ◽  
Inverse Dynamics Analysis

Abstract Mobile robots with manipulation capability are a key technology that enables flexible robotic interactions, large area covering and remote exploration. This paper presents a novel class of actuation-coordinated mobile parallel robots (ACMPRs) that utilize parallel mechanism configurations and perform hybrid moving and manipulation functions through coordinated wheel actuators. The ACMPRs differ with existing mobile manipulators by their unique combination of the mobile wheel actuators and the parallel mechanism topology through prismatic joint connections. The common motion of the wheels will provide the mobile function while their differentiation will actuate the parallel manipulator function. This new concept reduces the actuation requirement and increases the manipulation accuracy and mobile motion stability through the coordinated and connected wheel actuators comparing with existing mobile parallel manipulators. The relative wheel location on the base frame also enables a reconfigurable base size with variable moving stability on the ground. The basic concept and general type synthesis are introduced and followed by the kinematics and inverse dynamics analysis of a selected three limb ACMPR. A numerical simulation also illustrates the dynamics model and the motion property of the new mobile parallel robot. The work provides a basis for introducing this new class of robots for potential applications in surveillance, industrial automation, construction, transportation, human assistance, medical applications and other operations in extreme environment such as nuclear plants, Mars, etc.

Kinematic Isotropic Configuration of Spatial Cable-Driven Parallel Robots

2013 ◽  
pp. 266-290
Author(s):  
Hamoon Hadian ◽  
Abbas Fattah
Keyword(s):  
Parallel Manipulators ◽  
Parallel Robot ◽  
Numerical Approach ◽  
Parallel Robots ◽  
Degree Of Freedom ◽  
Tension Index ◽  
Symbolic Method ◽  
Three Degree Of Freedom ◽  
Cable Robots

In this paper, the authors study the kinematic isotropic configuration of spatial cable-driven parallel robots by means of four different methods, namely, (i) symbolic method, (ii) geometric workspace, (iii) numerical workspace and global tension index (GTI), and (iv) numerical approach. The authors apply the mentioned techniques to two types of spatial cable-driven parallel manipulators to obtain their isotropic postures. These are a 6-6 cable-suspended parallel robot and a novel restricted three-degree-of-freedom cable-driven parallel robot. Eventually, the results of isotropic conditions of both cable robots are compared to show their applications.

High-order singularities of 5R planar parallel robots

Robotica ◽  
2018 ◽  
Vol 37 (2) ◽  
pp. 233-245 ◽  
Author(s):  
Mustafa Özdemir
Keyword(s):  
Time Derivative ◽  
Parallel Manipulators ◽  
Parallel Robot ◽  
Singularity Analysis ◽  
Research Field ◽  
Parallel Robots ◽  
High Order ◽  
Inverse Dynamic ◽  
Active Research ◽  
Order Parallel

SUMMARYSingularity analysis of parallel manipulators is an active research field in robotics. The present article derives for the first time in the literature a condition under which a five-bar parallel robot encounters high-order parallel singularities. In this regard, by focusing on the planar 5R mechanism, a theorem is given in terms of the slope of its coupler curve at the parallel singular configurations. At high-order parallel singularities, the associated determinant vanishes simultaneously with at least its first-order time derivative. The determination of such singularities is quite important since in their presence, some special conditions should be satisfied for bounded inverse dynamic solutions.

Sign in / Sign up

Export Citation Format

Share Document