Performance of a Shore Fixed Oscillating Water Column Device for Different Bottom Slopes and Front Wall Drafts: A Study Based on Computational Fluid Dynamics and BIEM

2020 ◽  
Vol 143 (3) ◽  
Author(s):  
Piyush Mohapatra ◽  
K. G. Vijay ◽  
Anirban Bhattacharyya ◽  
Trilochan Sahoo
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Water Column ◽  
Wave Energy ◽  
High Efficiency ◽  
Boundary Integral ◽  
Hydrodynamic Performance ◽  
Chamber Pressure ◽  
Front Wall ◽  
Oscillating Water Column

Abstract Oscillating water column (OWC) wave energy converters are one of the most widely researched devices for ocean wave energy harvesting. This study investigates the hydrodynamic performance of a shore-fixed OWC device for different bottom slopes using two numerical approaches, namely, computational fluid dynamics (CFD) and boundary integral equation method (BIEM). In the BIEM method, the boundary value problem is solved in two-dimensional Cartesian coordinates using the linear water wave theory. The CFD model uses a numerical wave tank (NWT) built using the volume of fluid (VOF) method. Numerical computations are carried out for different sloped bottom geometries and front wall drafts to analyze the hydrodynamic efficiency. There is a general agreement between CFD and BIEM results in terms of resonating behavior of the device. It is observed that the front wall draft has a more significant effect, a lower draft leading to a wider frequency band for optimum conversion at high efficiency. While the BIEM-based analysis resulted in improved performance curve for few of the steeper slopes, the CFD study predicted a lower peak efficiency for the same slopes due to the consideration of real fluid characteristics. Detailed performance comparisons are presented using the time histories of free surface elevation, chamber pressure, and streamlines at different time instants within the OWC chamber.

scholarly journals Hydrodynamic performance analysis of a shore fixed oscillating water column wave energy converter in the presence of bottom variations

2019 ◽  
Vol 234 (1) ◽  
pp. 37-47
Author(s):  
Piyush Mohapatra ◽  
Trilochan Sahoo
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Water Column ◽  
Boundary Integral ◽  
Hydrodynamic Performance ◽  
Design Stage ◽  
Pressure Jump ◽  
Front Wall ◽  
Oscillating Water Column ◽  
Sea Bed

In this study, the effect of the stepped sea bed on the hydrodynamic performance of an oscillating water column device is investigated using computational fluid dynamics . This investigation is performed in a numerical wave tank modeled using ANSYS Fluent, which incorporates a transient, multiphase volume of fluid method to track the air–water interface. The power take-off unit is modeled as a porous zone in the flow field to produce the pressure jump versus flow characteristics that of a real air turbine. The efficiency of the chamber with and without the stepped bottom is analyzed and compared with known results in the literature. The flow parameters such as the temporal evolution and distribution of the pressure field, velocity field and free surface are studied to understand the performance of the proposed model. The study reveals that there is an improvement in hydrodynamic efficiency with the inclusion of the stepped bottom beneath the oscillating water column chamber, which is in agreement with the previous studies carried out using analytical and boundary integral equation methods. Moreover, the computational fluid dynamics model helps to understand the flow dynamics inside the oscillating water column chamber in a more intricate manner compared to the potential flow-based studies pursued in the literature. The formation of vortices within the oscillating water column chamber, near the front wall and stepped bottom could be captured, which affects the chamber performance to a certain extent. Overall, the study could be useful in the initial design stage of shore fixed oscillating water column devices.

Numerical investigation of front-wall inclination effects on the hydrodynamic performance of a fixed oscillation water column wave energy converter

2018 ◽  
Vol 233 (2) ◽  
pp. 262-271
Author(s):  
M Anbarsooz ◽  
H Rashki ◽  
A Ghasemi
Keyword(s):  
Water Column ◽  
Wave Height ◽  
Wave Energy ◽  
Nonlinear Waves ◽  
Absorption Efficiency ◽  
Hydrodynamic Performance ◽  
Front Wall ◽  
Oscillating Water Column ◽  
Wave Tank ◽  
Highly Nonlinear

One of the main geometrical parameters of the fixed oscillating water column wave energy converters is the inclination angle of front wall. In this study, the effects of this parameter on the hydrodynamic performance of an oscillating water column is investigated using a fully nonlinear two-dimensional numerical wave tank, which is developed using the Ansys Fluent 15.0 commercial software. The accuracy of the developed wave tank is first examined by simulating an oscillating water column, having a front wall normal to the water-free surface, subjected to linear, small amplitude incident waves. The resultant absorption efficiencies are compared with available analytical data in the literature, where a good agreement was observed. Next, the simulations are performed for strongly nonlinear waves, up to the wave steepness of 0.069 ( H/L = 0.069), where H is the wave height and L is the wave length. Results show that the absorption efficiency of the oscillating water column decreases considerably as the wave height increases. Moreover, the maximum wave energy absorption efficiency for the highly nonlinear waves occurs at a pneumatic damping coefficient lower than that of the linear theory. Then, the absorption efficiency of the oscillating water column is determined for eight various front wall configurations at various incident wave periods. Results show that, the front walls that are slightly bent towards the inner region of the oscillating water column chamber are more efficient at some wave periods in comparison with the cases studied in this paper.

scholarly journals Wave power extraction from a bottom-mounted oscillating water column converter with a V-shaped channel

2014 ◽  
Vol 470 (2167) ◽  
pp. 20140074 ◽  
Author(s):  
Zhengzhi Deng ◽  
Zhenhua Huang ◽  
Adrian W. K. Law
Keyword(s):  
Water Column ◽  
Water Depth ◽  
Wave Energy ◽  
High Efficiency ◽  
Expansion Method ◽  
Opening Angle ◽  
Energy Extraction ◽  
Oscillating Water Column ◽  
Wave Direction ◽  
Power Extraction

An analytical theory is developed for an oscillating water column (OWC) with a V-shaped channel to improve the pneumatic efficiency of wave energy extraction. An eigenfunction expansion method is used in a cylindrical coordinate system to investigate wave interaction with the OWC converter system. Auxiliary functions are introduced to capture the singular behaviours in the velocity field near the salient corners and cusped edges. Effects of the OWC dimensions, the opening angle and length of the V-shaped channel, as well as the incident wave direction, on the pneumatic efficiency of wave energy extraction are examined. Compared with a system without the V-shaped channel, our results show that the V-shaped channel can significantly increase the conversion efficiency and widen the range of wave frequency over which the OWC system can operate at a high efficiency. For typical coastal water depths, the OWC converter system can perform efficiently when the diameter of the OWC chamber is in the range of 1 5 – 1 2 times the water depth, the opening angle of the V-shaped channel is in the range of [ π /2, 3 π /4] and the length of the V-shaped channel is in the range of 1–1.5 times the water depth.

scholarly journals Computational Fluid Dynamics Model of Wells Turbine for Oscillating Water Column System: A Review

2021 ◽  
Vol 2053 (1) ◽  
pp. 012013
Author(s):  
N. Abdul Settar ◽  
S. Sarip ◽  
H.M. Kaidi
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Water Column ◽  
Cfd Simulation ◽  
Oscillating Water Column ◽  
Wells Turbine ◽  
Flow Problems ◽  
Cfd Models ◽  
Column System ◽  
Cfd Method

Abstract Wells turbine is an important component in the oscillating water column (OWC) system. Thus, many researchers tend to improve the performance via experiment or computational fluid dynamics (CFD) simulation, which is cheaper. As the CFD method becomes more popular, the lack of evidence to support the parameters used during the CFD simulation becomes a big issue. This paper aims to review the CFD models applied to the Wells turbine for the OWC system. Journal papers from the past ten years were summarized in brief critique. As a summary, the FLUENT and CFX software are mostly used to simulate the Wells turbine flow problems while SST k-ω turbulence model is the widely used model. A grid independence test is essential when doing CFD simulation. In conclusion, this review paper can show the research gap for CFD simulation and can reduce the time in selecting suitable parameters when involving simulation in the Wells turbine.

Numerical and Geometrical Analysis of the Onshore Oscillating Water Column Wave Energy with a Ramp

2021 ◽  
Vol 412 ◽  
pp. 11-26
Author(s):  
Marla Rodrigues Oliveira ◽  
Elizaldo Domingues Santos ◽  
Liércio André Isoldi ◽  
Luiz Alberto Oliveira Rocha ◽  
Mateus das Neves Gomes
Keyword(s):  
Water Column ◽  
Wave Energy ◽  
Degrees Of Freedom ◽  
Design Method ◽  
Geometric Analysis ◽  
Relative Difference ◽  
Front Wall ◽  
Multiphase Model ◽  
Oscillating Water Column ◽  
Worst Case

This study is about a two-dimensional numerical analysis of the influence of a ramp in front on an oscillating water column wave energy converter (OWC-WEC). The main purpose was to evaluate, numerically and geometrically, the effect of using a ramp variation in relation to the frontal wall on the hydropneumatic power of the OWC-WEC. The constructal design method was applied for geometric analysis. The problem had a geometric constraint: the area of the ramp (A2) and two degrees of freedom: H2 / L2 (ratio of the height and length of the ramp) and L4 (the distance of the ramp concerning the OWC-WEC front wall). In numerical simulations, the equations of conservation of mass, momentum, and an equation for the transport of volumetric fraction were solved using the finite volume method (FVM). The multiphase model volume of fluid (VOF) was applied for the air-water interaction. Thus, the increase in the H2/L2 ratio resulted in a decrease of the root mean square (RMS) of the available hydropneumatic power (Phyd). By varying the distance L4, the better case was = 6 m and / = 0.025 and the worst case was = 1 m and / = 0.2. The relative difference between the better RMS Phyd = 150.7957 W and the worst Phyd = 73.1164 W reached up to a hundred and six percent.

Sign in / Sign up

Export Citation Format

Share Document