Geometry-Based Thick Origami Simulation

2020 ◽  
Vol 143 (6) ◽  
Author(s):  
Tsz-Ho Kwok
Keyword(s):  
Three Dimensional ◽  
Geometric Design ◽  
Experimental Results ◽  
Engineering Applications ◽  
3D Shape ◽  
Folding Paper ◽  
Geometric Simulation ◽  
Geometric Formulation

Abstract Origami is the art of creating a three-dimensional (3D) shape by folding paper. It has drawn much attention from researchers, and the designs that origami has inspired are used in various engineering applications. Most of these designs are based on familiar origami patterns and their known deformations, but origami patterns were originally intended for materials of near-zero thickness, primarily paper. To use the designs in engineering applications, it is necessary to simulate origami in a way that enables designers to explore and understand the designs while taking the thickness of the material to be folded into account. Because origami is primarily a problem in geometric design, this paper develops a geometric simulation for thick origami. The actuation, constraints, and assignment of mountain and valley folds in origami are also incorporated into the geometric formulation. The experimental results show that the proposed method is efficient and accurate. The method can successfully simulate a flat-foldable degree-four vertex, two different action origami, the bistable property of a waterbomb base, and the elasticity of non-rigid origami panels.

Geometric Simulation for Thick Origami

2019 ◽  
Author(s):  
Tsz-Ho Kwok
Keyword(s):  
Design Problem ◽  
Three Dimensional ◽  
Experimental Results ◽  
Engineering Applications ◽  
Research Attention ◽  
3D Shape ◽  
Mountain Valley ◽  
Geometry Design ◽  
Geometric Simulation ◽  
Geometric Formulation

Abstract Origami is an art that creates a three-dimensional (3D) shape only by folding. This capability has drawn much research attention recently, and its applied or inspired designs are utilized in various engineering applications. Most current designs are based on the existing origami patterns and their known deformation, but origami patterns are universally designed for zero-thickness like a paper. To extend the designs for engineering applications, simulation of origami is needed to help designers explore and understand the designs, and the simulation must take the material thickness into account. With the observation that origami is mainly a geometry design problem, this paper develops a geometric simulation for thick origami, similar to a pseudo-physics approach. The actuation, constraints, and mountain/valley assignments of origami are also incorporated in the geometric formulation. Experimental results show that the proposed method is efficient and accurate. It can simulate successfully the bistable property of a waterbomb base, two different action origami, and the elasticity of origami panels when they are not rigid.

Discussion of “A Review of Thickness-Accommodation Techniques in Origami-Inspired Engineering” (Lang, R. J., Tolman, K. A., Crampton, E. B., Magleby, S. P., and Howell, L. L., 2018, ASME Appl. Mech. Rev., 70(1), p. 010805

2018 ◽  
Vol 70 (1) ◽  
Author(s):  
Daniel A. McAdams
Keyword(s):  
Design Research ◽  
Three Dimensional ◽  
Systems Design ◽  
Applied Mechanics ◽  
Engineering Applications ◽  
Traditional Art ◽  
Art Form ◽  
Folding Paper ◽  
Practical Engineering ◽  
The Impact

Origami is a traditional art form that realizes three-dimensional shapes by folding paper sheets. Origami designers use mathematical theorems to support their design efforts. These theorems require a condition of a flat fold on folded sheets. When working with paper, the paper is essentially zero thickness and folds flat. Thus, to access the power of flat-foldability theorems for origami-inspire design, nonzero thickness stiff sheet crease patterns must still be flat foldable. For nonzero thickness sheets as would be used in practical engineering applications, special fold designs are required to allow an effectively flat fold. In this issue of ASME Applied Mechanics Reviews, Lang and co-authors present a review of fold design techniques to enable effectively flat folding of nonzero thickness sheets. In this discussion, the impact of the author's work is highlighted. As well, the contributions of the authors work is situated in the context of origami-inspired systems design. The integration of their work into a systems construct clarifies and motivates the need for further origami-inspired design research.

Practical electron tomography

1995 ◽  
Vol 53 ◽  
pp. 742-743
Author(s):  
C.L. Woodcock
Keyword(s):  
Electron Tomography ◽  
Tomographic Reconstruction ◽  
Three Dimensional ◽  
3D Shape ◽  
Computational Resources ◽  
Shape Of Particles

Despite the potential of the technique, electron tomography has yet to be widely used by biologists. This is in part related to the rather daunting list of equipment and expertise that are required. Thanks to continuing advances in theory and instrumentation, tomography is now more feasible for the non-specialist. One barrier that has essentially disappeared is the expense of computational resources. In view of this progress, it is time to give more attention to practical issues that need to be considered when embarking on a tomographic project. The following recommendations and comments are derived from experience gained during two long-term collaborative projects.Tomographic reconstruction results in a three dimensional description of an individual EM specimen, most commonly a section, and is therefore applicable to problems in which ultrastructural details within the thickness of the specimen are obscured in single micrographs. Information that can be recovered using tomography includes the 3D shape of particles, and the arrangement and dispostion of overlapping fibrous and membranous structures.

Conical SNA using fuzzy k-medoids based on user experience

2021 ◽  
pp. 002072092098849
Author(s):  
Poonam Rani ◽  
MPS Bhatia ◽  
Devendra K Tayal
Keyword(s):  
Social Networks ◽  
Social Network ◽  
User Experience ◽  
Three Dimensional ◽  
Experimental Results ◽  
Dynamic Parameters ◽  
Clustering Method ◽  
Cone Model ◽  
Intelligent Approach ◽  
Conical Model

The paper presents an intelligent approach for the comparison of social networks through a cone model by using the fuzzy k-medoids clustering method. It makes use of a geometrical three-dimensional conical model, which astutely represents the user experience views. It uses both the static as well as the dynamic parameters of social networks. In this, we propose an algorithm that investigates which social network is more fruitful. For the experimental results, the proposed work is employed on the data collected from students from different universities through the Google forms, where students are required to rate their experience of using different social networks on different scales.

scholarly journals Three-Dimensional Printable Hydrogel Using a Hyaluronic Acid/Sodium Alginate Bio-Ink

Polymers ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 794 ◽  
Author(s):  
Su Jeong Lee ◽  
Ji Min Seok ◽  
Jun Hee Lee ◽  
Jaejong Lee ◽  
Wan Doo Kim ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Hyaluronic Acid ◽  
Sodium Alginate ◽  
Three Dimensional ◽  
Fibroblast Cell ◽  
Chemical Crosslinking ◽  
Fibroblast Cell Line ◽  
Engineering Applications ◽  
Encapsulated Cells ◽  
Crosslinking Agents

Bio-ink properties have been extensively studied for use in the three-dimensional (3D) bio-printing process for tissue engineering applications. In this study, we developed a method to synthesize bio-ink using hyaluronic acid (HA) and sodium alginate (SA) without employing the chemical crosslinking agents of HA to 30% (w/v). Furthermore, we evaluated the properties of the obtained bio-inks to gauge their suitability in bio-printing, primarily focusing on their viscosity, printability, and shrinkage properties. Furthermore, the bio-ink encapsulating the cells (NIH3T3 fibroblast cell line) was characterized using a live/dead assay and WST-1 to assess the biocompatibility. It was inferred from the results that the blended hydrogel was successfully printed for all groups with viscosities of 883 Pa∙s (HA, 0% w/v), 1211 Pa∙s (HA, 10% w/v), and 1525 Pa∙s, (HA, 30% w/v) at a 0.1 s−1 shear rate. Their structures exhibited no significant shrinkage after CaCl2 crosslinking and maintained their integrity during the culture periods. The relative proliferation rate of the encapsulated cells in the HA/SA blended bio-ink was 70% higher than the SA-only bio-ink after the fourth day. These results suggest that the 3D printable HA/SA hydrogel could be used as the bio-ink for tissue engineering applications.

Research on Transition Zones of Spherical Surface Parts in 3D Rolling Process

2014 ◽  
Vol 687-691 ◽  
pp. 3-6
Author(s):  
Da Ming Wang ◽  
Ming Zhe Li ◽  
Zhong Yi Cai
Keyword(s):  
Sheet Metal ◽  
Spherical Surface ◽  
Three Dimensional ◽  
Rolling Process ◽  
Experimental Results ◽  
Transition Zones ◽  
Spherical Surfaces ◽  
Sheet Width ◽  
Forming Precision ◽  
Roll Gap

3D rolling is a novel technology for three-dimensional surface parts. In this process, by controlling the gap between the upper and lower forming rolls, the sheet metal is non-uniformly thinned in thickness direction, and the longitudinal elongation of the sheet metal is different along the transverse direction, which makes the sheet metal generate three-dimensional deformation. In this paper, the transition zones of spherical surface parts in 3D rolling process are investigated. Spherical surface parts with the same widths but different lengths are simulated in condition of the same roll gap, and their experimental results are presented. The forming precision of forming parts and the causes of transition zones in the head and tail regions are analyzed through simulated results. The simulated and experimental results show that the lengths of transition zones of spherical surfaces in the head and tail regions are fixed values in condition of the same sheet width and roll gap.

Segmentation of Kidneys from Computed Tomography Using 3D Fast GrowCut Algorithm

2013 ◽  
Vol 333-335 ◽  
pp. 1145-1150 ◽  
Author(s):  
Gao Yuan Dai ◽  
Zhi Cheng Li ◽  
Jia Gu ◽  
Lei Wang ◽  
Xing Min Li ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Three Dimensional ◽  
Experimental Results ◽  
Volume Data ◽  
Great Role ◽  
Color Features ◽  
Monotonically Decreasing Function ◽  
Kidney Segmentation ◽  
Ct Volume

This paper proposes a fast GrowCut (FGC) algorithm and applies the new algorithm in three-dimensional (3D)kidney segmentation from computed tomography (CT) volume data. Users could mark the object of interest with different labels in CT slices.FGC propagates the labels using monotonically decreasing function and color features to derive an optimal cut for a given data in space. The color features play a great role in comparing with neighborhood cells. The experimental results clearly demonstrate the superiority of FGC in accuracy and speed.

Finite Element Study of the Cutting Mechanics of the Three Dimensional Rock Turning Process

2015 ◽  
Author(s):  
Demeng Che ◽  
Jacob Smith ◽  
Kornel F. Ehmann
Keyword(s):  
Finite Element ◽  
Oil And Gas ◽  
Three Dimensional ◽  
Polycrystalline Diamond ◽  
Close Correlation ◽  
Experimental Results ◽  
Failure Behavior ◽  
Fe Model ◽  
Gas Drilling ◽  
Cutting Mechanics

The unceasing improvements of polycrystalline diamond compact (PDC) cutters have pushed the limits of tool life and cutting efficiency in the oil and gas drilling industry. However, the still limited understanding of the cutting mechanics involved in rock cutting/drilling processes leads to unsatisfactory performance in the drilling of hard/abrasive rock formations. The Finite Element Method (FEM) holds the promise to advance the in-depth understanding of the interactions between rock and cutters. This paper presents a finite element (FE) model of three-dimensional face turning of rock representing one of the most frequent testing methods in the PDC cutter industry. The pressure-dependent Drucker-Prager plastic model with a plastic damage law was utilized to describe the elastic-plastic failure behavior of rock. A newly developed face turning testbed was introduced and utilized to provide experimental results for the calibration and validation of the formulated FE model. Force responses were compared between simulations and experiments. The relationship between process parameters and force responses and the mechanics of the process were discussed and a close correlation between numerical and experimental results was shown.

Geometric simulation for warp-knitted tubular bandages with the mesh model

2021 ◽  
pp. 004051752110138
Author(s):  
Haisang Liu ◽  
Gaoming Jiang ◽  
Zhijia Dong
Keyword(s):  
Programming Languages ◽  
Three Dimensional ◽  
3D Mesh ◽  
Mesh Model ◽  
Matrix Operations ◽  
Computer Aided ◽  
Spatial Geometry ◽  
3D Mesh Model ◽  
Coordinate Mapping ◽  
Geometric Simulation

The purpose of this paper is to geometrically simulate warp-knitted medical tubular bandages with a computer-aided simulator. A flat mesh model is established according to unfolded fabric considering the knitting characteristics of double-needle bed warp-knitted tubular fabrics. Moreover, a 3D (three-dimensional) mesh model corresponding to the actual product shape is created. To better describe the spatial geometry of stitches, eight-point models are introduced, and stitches are generated with the flat mesh model. Founded on matrix operations, the stitch position in the 3D mesh model is determined through coordinate mapping. Various stitch paths are rendered in computer programming languages C# and JavaScript to conduct simulations. Warp-knitted medical tubular bandages with a large number of shapes are effectively modeled.

Sign in / Sign up

Export Citation Format

Share Document