Advanced Welding Manufacturing: A Brief Analysis and Review of Challenges and Solutions

2020 ◽  
Vol 142 (11) ◽  
Author(s):  
Yu Ming Zhang ◽  
Yu-Ping Yang ◽  
Wei Zhang ◽  
Suck-Joo Na
Keyword(s):  
Fluid Dynamics ◽  
Numerical Modeling ◽  
Laser Welding ◽  
Real Time ◽  
Arc Welding ◽  
Numerical Models ◽  
Gas Metal Arc Welding ◽  
Seam Tracking ◽  
Welding Parameters ◽  
Friction Stir

Abstract Welding is a major manufacturing process that joins two or more pieces of materials together through heating/mixing them followed by cooling/solidification. The goal of welding manufacturing is to join materials together to meet service requirements at lowest costs. Advanced welding manufacturing is to use scientific methods to realize this goal. This paper views advanced welding manufacturing as a three step approach: (1) pre-design that selects process and joint design based on available processes (properties, capabilities, and costs); (2) design that uses models to predict the result from a given set of welding parameters and minimizes a cost function for optimizing the welding parameters; and (3) real-time sensing and control that overcome the deviations of welding conditions from their nominal ones used in optimizing the welding parameters by adjusting the welding parameters based on such real-time sensing and feedback control. The paper analyzes how these three steps depend on process properties/capabilities, process innovations, predictive models, numerical models for fluid dynamics, numerical models for structures, real-time sensing, and dynamic control. The paper also identifies the challenges in obtaining ideal solutions and reviews/analyzes the existing efforts toward better solutions. Special attention and analysis have been given to (1) gas tungsten arc welding (GTAW) and gas metal arc welding (GMAW) as benchmark processes for penetration and materials filling; (2) keyhole plasma arc welding (PAW), keyhole-tungsten inert gas (K-TIG), and keyhole laser welding as improved/capable penetrative processes; (3) friction stir welding (FSW) as a special penetrative low heat input process; (4) alternating current (AC) GMAW and double-electrode GMAW as improved materials filling processes; (5) efforts in numerical modeling for fluid dynamics; (6) efforts in numerical modeling for structures; (7) challenges and efforts in seam tracking and weld pool monitoring; (8) challenges and efforts in monitoring of keyhole laser welding and FSW; and (9) efforts in advanced sensing, data fusion/sensor fusion, and process control using machine learning/deep learning, model predictive control (MPC), and adaptive control.

Effect of the Heat Input in the Transformation of Retained Austenite in Advanced Steels of Transformation Induced Plasticity (TRIP) Welded with Gas Metal Arc Welding

2013 ◽  
Vol 339 ◽  
pp. 700-705 ◽  
Author(s):  
Victor Lopez ◽  
Arturo Reyes ◽  
Patricia Zambrano
Keyword(s):  
Heat Input ◽  
Arc Welding ◽  
Retained Austenite ◽  
Volume Fraction ◽  
Gas Metal Arc Welding ◽  
Welding Process ◽  
Residual Austenite ◽  
Welding Parameters ◽  
Transformation Induced Plasticity ◽  
Metal Arc Welding

The effect of heat input on the transformation of retained austenite steels transformation induced plasticity (TRIP) was investigated in the heat affected zone (HAZ) of the Gas Metal Arc Welding GMAW process. The determination of retained austenite of the HAZ is important in optimizing the welding parameters when welding TRIP steels, because this will greatly influence the mechanical properties of the welding joint due to the transformation of residual austenite into martensite due to work hardening. Coupons were welded with high and low heat input for investigating the austenite transformation of the base metal due to heat applied by the welding process and was evaluated by optical microscopy and the method of X-Ray Diffraction (XRD). Data analyzed shows that the volume fraction of retained austenite in the HAZ increases with the heat input applied by the welding process, being greater as the heat input increase and decrease the cooling rate, this due to variation in the travel speed of the weld path.

A study on sustainability assessment of welding processes

2019 ◽  
Vol 234 (3) ◽  
pp. 501-512 ◽  
Author(s):  
Jaber Jamal ◽  
Basil Darras ◽  
Hossam Kishawy
Keyword(s):  
Arc Welding ◽  
Social Impact ◽  
Sustainability Assessment ◽  
Gas Metal Arc Welding ◽  
Welding Process ◽  
Friction Stir ◽  
Gas Tungsten Arc ◽  
Metal Arc Welding ◽  
Sustainability Assessments ◽  
Welding Processes

The concept of “sustainability” has recently risen to take the old concept of going “green” further. This article presents general methodologies for sustainability assessments. These were then adapted to measure and assess the sustainability of welding processes through building a complete framework, to determine the best welding process for a particular application. To apply this methodology, data about the welding processes would be collected and segregated into four categories: environmental impact, economic impact, social impact, and physical performance. The performance of each category would then be aggregated into a single sustainability score. To demonstrate the capability of this methodology, case studies of three different welding processes were performed. Friction stir welding obtained the highest overall sustainability score compared to gas tungsten arc welding and gas metal arc welding.

scholarly journals Effects of High Frequency Mechanical Impact on Fatigue Life of Semi-Automated Gas Metal Arc Welding (GTAW) of HSLA Butt Weld

2019 ◽  
Vol 269 ◽  
pp. 06002
Author(s):  
Salina Saidin ◽  
Dahia Andud ◽  
Yupiter H. P. Manurung ◽  
Muhd. Faiz Mat ◽  
Noridzwan Nordin ◽  
...  
Keyword(s):  
Fatigue Life ◽  
Fatigue Strength ◽  
Arc Welding ◽  
Gas Metal Arc Welding ◽  
Steel Structure ◽  
Welding Parameters ◽  
Butt Weld ◽  
Metal Arc Welding ◽  
Life Enhancement ◽  
Fatigue Life Enhancement

This paper deals with a comprehensive investigation of fatigue life enhancement on semiautomated Gas Metal Arc Welding (GTAW) butt weld joint which is found almost everywhere in Malaysia welding structure steel sectors. The selected material in this study was high strength low alloy steel S460G2+M commonly used extremely in steel structure due to its outstanding mechanical properties. In this investigation, the method for joining the butt weld was conducted by unprofessional welder using semi-automated GMAW. At first, suitable welding parameters were identified and formulated into welding procedure specification (WPS) qualification conforming to AWS D1.1 standard. The test specimens were prepared and tested to ensure the welding quality. Further, the HFMI using Pneumatic Impact Treatment (PIT) technique were applied at the weld toe of the butt weld as tool for fatigue life enhancement. To investigate the influence of HFMI/PIT on the fatigue strength, the specimens were undergone fatigue test using universal fatigue machine using a constant amplitude loading. Finally, the comparison of the fatigue strength of as welded and treated specimens to indicate the beneficial influence of the treatment. Yes, the conduction by unprofessional welder using semi-automatic GMAW, the findings showed the improvement of fatigue strength and slope of S-N curves. In addition, the fracture location of test specimen shows physically affected by shifting from critical weld transition to base metal. The tensile test and hardness value also showed a slight difference as compared to untreated specimens.

Comparison of different welding methods on mechanical properties and formability behaviors of tailor welded blanks (TWB) made from AA6061 alloys

2020 ◽  
pp. 095440622095250
Author(s):  
Behrouz Bagheri ◽  
Mahmoud Abbasi ◽  
Reza Hamzeloo
Keyword(s):  
Mechanical Properties ◽  
Laser Welding ◽  
Co2 Laser ◽  
Forming Limit Diagram ◽  
Dome Height ◽  
Forming Limit ◽  
Welding Parameters ◽  
Friction Stir ◽  
Tailor Welded Blanks ◽  
Different Characteristics

A tailor welded blank (TWB) includes two or more blanks joined together in order to make a single blank. Different welding methods are used to join blanks with different characteristics and form TWBs. In this study, a comparison is made among the effects of three different welding methods namely CO2 laser welding, friction stir welding (FSW), and friction stir vibration welding (FSVW) on mechanical and formability properties of developed TWBs. AA6061 alloy sheets with different thicknesses (1.2 and 0.8 mm) are joined to get TWBs. The forming limit diagram (FLD) and limiting dome height (LDH) are applied to assess the formability. The Taguchi method is applied to find the optimum values of welding parameters. It is concluded that TWBs made by FSVW have higher mechanical properties and formability compared to TWBs made by FSW and CO2 laser welding. The results also indicate that FLD for TWBs made by FSW is higher than FLD for TWBs made by CO2 laser welding and FLD0, for TWBs made by FSVW, increases as vibration frequency increases.

scholarly journals Influence of welding method on microstructural creation of welded joints  

2011 ◽  
Vol 57 (Special Issue) ◽  
pp. S50-S56 ◽  
Author(s):  
P. Čičo ◽  
D. Kalincová ◽  
M. Kotus
Keyword(s):  
Welded Joints ◽  
Arc Welding ◽  
Welded Joint ◽  
Gas Metal Arc Welding ◽  
Structural Phase ◽  
Welding Parameters ◽  
Welding Method ◽  
Welding Technology ◽  
Metal Arc Welding

This paper is focused on the analysis of the welding technology influence on the microstructure production and quality of the welded joint. Steel of class STN 41 1375 was selected for the experiment, the samples were welded by arc welding including two methods: a manual one by coated electrode and gas metal arc welding method. Macro and microstructural analyses of the experimental welded joints confirmed that the welding parameters affected the welded joint structure in terms of the grain size and character of the structural phase.

scholarly journals An adaptive approach to compensate seam tracking error in robotic welding process by a moving fixture

2018 ◽  
Vol 15 (6) ◽  
pp. 172988141881620
Author(s):  
Reza Ebrahimpour ◽  
Rasul Fesharakifard ◽  
Seyed Mehdi Rezaei
Keyword(s):  
Weld Pool ◽  
Arc Welding ◽  
Sliding Mode ◽  
Gas Metal Arc Welding ◽  
Tracking Error ◽  
Welding Process ◽  
Seam Tracking ◽  
Ball Screw ◽  
Robotic Welding ◽  
Metal Arc Welding

Welding is one of the most common method of connecting parts. Welding methods and processes are very diverse. Welding can be of fusion or solid state types. Arc welding, which is classified as fusion method, is the most widespread method of welding, and it involves many processes. In gas metal arc welding or metal inert gas–metal active gas, the protection of the molten weld pool is carried out by a shielding gas and the filler metal is in the form of wire which is automatically fed to the molten weld pool. As a semi-metallic arc process, the gas metal arc welding is a very good process for robotic welding. In this article, to conduct the metal active gas welding torch, an auxiliary ball screw servomechanism is proposed to move under a welder robot to track the welded seam. This servomechanism acts as a moving fixture and operates separately from the robot. At last, a decentralized control method based on adaptive sliding mode is designed and implemented on the fixture to provide the desired motion. Experimental results demonstrate an appropriate accuracy of seam tracking and error compensation by the proposed method.

Sign in / Sign up

Export Citation Format

Share Document