Workspace Augmentation for the Large-Scale Spherical Honeycombs Perfusion Using a Novel 5DOF Reconfigurable Manipulator

2020 ◽  
Vol 12 (6) ◽  
Author(s):  
Hui Yang ◽  
Hairong Fang ◽  
Xiangyun Li ◽  
Yuefa Fang
Keyword(s):  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Large Scale ◽  
Singularity Analysis ◽  
Structural Components ◽  
Reachable Workspace ◽  
Large Movement ◽  
Moving Platform ◽  
Complex Structural ◽  
Limit Position

Abstract The volume of workspace is a significant kinematic index of parallel manipulator in some applications of engineering. However, the workspace degradation of the manipulator in extreme position is a demanding issue, which results in a fact that such manipulators cannot satisfy the machining requirement of the maximum limit position for the large-scale complex structural components. In this paper, a novel five degrees-of-freedom (DOF) 5PRR+5PUS-PRPU parallel manipulator (PM) is presented. First, the mobility analysis for the proposed manipulator is carried out, and the inverse kinematics as well as the Jacobian matrix is developed. Then, the workspace of the 5PRR+5PUS-PRPU PM and the 5PUS-PRPU PM is analyzed to study the workspace augmentation of the proposed PM. The workspace comparisons of these two PMs prove that the proposed PM not only can realize the large movement of the moving platform along the z-axis, but also possess larger workspace than the 5PUS-PRPU PM when the moving platform has a large movement along the z-axis. Furthermore, the singularity analysis is also conducted to show the singularity-free workspace of the proposed PM. By the introduction of the reconfigurable 5PRR PM, the proposed manipulator effectively augments the reachable workspace of the moving platform along the z-axis and to some extent also solves the issue of workspace degradation of the PM along z-axis.

Dynamic Modeling of a Parallel Manipulator With Three Translational Degrees of Freedom

1998 ◽  
Author(s):  
Richard Stamper ◽  
Lung-Wen Tsai
Keyword(s):  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Close Agreement ◽  
Jacobian Matrix ◽  
Parallel Manipulators ◽  
Kinematic Structure ◽  
End Effector ◽  
Moving Platform ◽  
Euler Approach ◽  
Computationally Intensive

Abstract The dynamics of a parallel manipulator with three translational degrees of freedom are considered. Two models are developed to characterize the dynamics of the manipulator. The first is a traditional Lagrangian based model, and is presented to provide a basis of comparison for the second approach. The second model is based on a simplified Newton-Euler formulation. This method takes advantage of the kinematic structure of this type of parallel manipulator that allows the actuators to be mounted directly on the base. Accordingly, the dynamics of the manipulator is dominated by the mass of the moving platform, end-effector, and payload rather than the mass of the actuators. This paper suggests a new method to approach the dynamics of parallel manipulators that takes advantage of this characteristic. Using this method the forces that define the motion of moving platform are mapped to the actuators using the Jacobian matrix, allowing a simplified Newton-Euler approach to be applied. This second method offers the advantage of characterizing the dynamics of the manipulator nearly as well as the Lagrangian approach while being less computationally intensive. A numerical example is presented to illustrate the close agreement between the two models.

Kinematic Synthesis of a Spatial 3-RPS Parallel Manipulator

2003 ◽  
Vol 125 (1) ◽  
pp. 92-97 ◽  
Author(s):  
Han Sung Kim ◽  
Lung-Wen Tsai
Keyword(s):  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Parallel Manipulators ◽  
Point Of View ◽  
Dimensional Synthesis ◽  
Kinematic Synthesis ◽  
End Effector ◽  
Solution Methods ◽  
Moving Platform ◽  
At Will

This paper presents the design of spatial 3-RPS parallel manipulators from dimensional synthesis point of view. Since a spatial 3-RPS manipulator has only 3 degrees of freedom, its end effector cannot be positioned arbitrarily in space. It is shown that at most six positions and orientations of the moving platform can be prescribed at will and, given six prescribed positions, there are at most ten RPS chains that can be used to construct up to 120 manipulators. Further, solution methods for fewer than six prescribed positions are also described.

A 2(3-RRPS) parallel manipulator inspired by Gough–Stewart platform

Robotica ◽  
2012 ◽  
Vol 31 (3) ◽  
pp. 381-388 ◽  
Author(s):  
Jaime Gallardo-Alvarado ◽  
Mario A. García-Murillo ◽  
Eduardo Castillo-Castaneda
Keyword(s):  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Screw Theory ◽  
Parallel Manipulators ◽  
Forward Kinematics ◽  
Triangular Prism ◽  
Input Output ◽  
Six Degrees Of Freedom ◽  
Moving Platform

SUMMARYThis study addresses the kinematics of a six-degrees-of-freedom parallel manipulator whose moving platform is a regular triangular prism. The moving and fixed platforms are connected to each other by means of two identical parallel manipulators. Simple forward kinematics and reduced singular regions are the main benefits offered by the proposed parallel manipulator. The Input–Output equations of velocity and acceleration are systematically obtained by resorting to reciprocal-screw theory. A case study, which is verified with the aid of commercially available software, is included with the purpose to exemplify the application of the method of kinematic analysis.

Workspace Optimization of a Six Degrees of Freedom Parallel Manipulator for Micromachining

2010 ◽  
Author(s):  
Ahmet Agaoglu ◽  
Namik Ciblak ◽  
Koray K. Safak
Keyword(s):  
Numerical Analysis ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Base Plane ◽  
Six Degrees Of Freedom ◽  
Moving Platform ◽  
Workspace Optimization ◽  
Kinematic Diagram ◽  
Orientation Workspace

This work addresses the optimization of the workspace of a six degrees of freedom parallel manipulator. In this study, The topology of the manipulator is composed of three xy-tables, symmetrically positioned on a circle on a base plane, connected by three legs to a moving platform. Kinematic composition of the manipulator is introduced and kinematic diagram is illustrated. Orientation workspace is investigated using three different orientation representations. XYZ fixed angles representation is selected considering the benefits of its visualization are considered. By using this representation, the orientation workspace is modeled and kinematic circuits of the manipulator are explored. First, optimization is performed without slider limitations. A result table is obtained based on the user defined parameters. Secondly, optimization is performed under slider limitations. The maximal orientation capability is optimized using numerical analysis. The optimized configuration of the manipulator indicates that a 330% increase in orientation capability is achieved, compared to the old configuration.

Orientation Workspace Analysis of a Novel 3SPS+1PS Symmetrical Parallel Manipulator Based on Unit Quaternion

2011 ◽  
Vol 201-203 ◽  
pp. 1849-1853
Author(s):  
Jing Li Yu ◽  
Gang Cheng ◽  
Shuai Zhang ◽  
De Kun Zhang
Keyword(s):  
Inverse Kinematics ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Unit Quaternion ◽  
Structure Characteristics ◽  
Workspace Analysis ◽  
Moving Platform ◽  
Position And Orientation ◽  
4 Degrees Of Freedom ◽  
Orientation Workspace

For a novel 3SPS+1PS parallel manipulator with 4 degrees of freedom including three rotations and one translation, the formulae for solving the inverse kinematics equations are derived based on quaternion method. Unit quaternion is used to represent the position and orientation of moving platform, and the singularities caused by Euler angles are avoided. Combining the topological structure characteristics of the parallel manipulator, it only has three rotations when its moving platform is at a given translation position. Based on the inverse position/pose equations and the all the constraints of the parallel manipulator, the discrete algorithm for the orientation workspaces of 3SPS+1PS parallel manipulator where the moving platform is at some different given translation positions are designed. The research builds the theoretical basis for optimizing the orientation workspace with given position.

A Parallel 5 DOF Positioner for Semi-Spherical Workspaces

2004 ◽  
Author(s):  
Benjamin Maurin ◽  
Bernard Bayle ◽  
Jacques Gangloff ◽  
Michel de Mathelin ◽  
Olivier Piccin
Keyword(s):  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Medical Applications ◽  
Robotic Device ◽  
X Ray ◽  
Revolute Joints ◽  
X Ray Imaging ◽  
Physical Prototype ◽  
Moving Platform ◽  
Functional Point

In this paper, a new five-degree-of-freedom parallel manipulator is described and modeled. This structure has been specially designed for medical applications that require in the same time mobility, compactness and accuracy around a functional point. The purpose of this robotic device is to help practitioners to perform accurate needle insertions while preserving them from harmful intra-operative X-ray imaging devices. The system is built from revolute joints, among which only five joints are actuated to convey the required five degrees of freedom to its moving platform. A numerical simulation of the workspace and a physical prototype are presented.

Influence Coefficients and Singularity Analysis of a Novel 3-UPU Parallel Mechanism

2017 ◽  
Author(s):  
Ziming Chen ◽  
Dongliang Cheng ◽  
Yang Zhang ◽  
Zhiwei Yang ◽  
Jin Zhou
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Model Simulation ◽  
Hessian Matrix ◽  
Symmetry Plane ◽  
Coefficient Matrix ◽  
Singularity Analysis ◽  
Influence Coefficient ◽  
Parasitic Motion ◽  
Moving Platform

A novel 3-UPU parallel mechanism with two rotational and one translational (2R1T) degrees of freedom (DOFs) is analyzed in this paper. The base and moving platform of this mechanism are always symmetric about a middle symmetry plane. The moving platform can rotate continuously about any axis on the middle symmetry plane, so there exists no parasitic motion during the rotation. Using the kinematic influence coefficient theory and the imaginary mechanism method, the first and second order influence coefficient matrix (namely Jacobian matrix and Hessian matrix) of this mechanism are derived. The relations between the velocity and acceleration of the moving platform and the actuated links are obtained. In order to verify the correctness of the theory, two numerical examples are enumerated and varified by the 3D model simulation. The singularities of this mechanism is discussed and the singular configurations of the mechanism, including one kind of limb singularity and two kinds of platform singularities, are obtained.

A novel class of generalized parallel manipulators with high rotational capability

2020 ◽  
Vol 234 (23) ◽  
pp. 4599-4619
Author(s):  
Chunxu Tian ◽  
Dan Zhang ◽  
Jian Liu
Keyword(s):  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Structural Characteristics ◽  
Synthesis Method ◽  
Parallel Manipulators ◽  
Rigid Bodies ◽  
Kinematic Chains ◽  
Moving Platforms ◽  
Moving Platform ◽  
Limb Structure

A conventional parallel manipulator is characterized by connecting one moving platform with two or more serial kinematic limbs. Since each limb is independently supporting one moving platform, the moving platform must be a rigid body with several kinematic pairs fixed on it. However, for generalized parallel manipulators with articulated moving platforms, the moving platforms are not limited to rigid bodies but including serial kinematic chains or internal kinematic joints. The introduction of articulated moving platforms allows for improving the kinematic performance of generalized parallel manipulators, especially for rotational capability. On account of the structural characteristics of the moving platforms, it also poses a significant challenge in the construction of the structures of manipulators. This research raises a new method for the type synthesis of generalized parallel manipulators with novel articulated moving platforms. The proposed method introduces a striking shortcut for the limb structure analysis of mechanisms with high rotational capability. In this paper, a class of generalized parallel manipulator with different degrees of freedom from 3 to 6 are constructed by using the constraint synthesis method, and several examples are provided to demonstrate the feasibility of the advocated method. At last, the 3T3R generalized parallel manipulator is taken as an example to analyze the inverse kinematics, and the evaluation of the workspace is conducted to verify the rotational capacity.

Kinematic Analysis of a New 3-DOF Translational Parallel Manipulator

2005 ◽  
Author(s):  
Yangmin Li ◽  
Qingsong Xu
Keyword(s):  
Inverse Kinematics ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Screw Theory ◽  
Industrial Applications ◽  
Forward Kinematics ◽  
Physical Constraints ◽  
Mechanical Joints ◽  
Reachable Workspace ◽  
Three Degrees Of Freedom

A novel three-degrees-of-freedom (3-DOF) translational parallel manipulator (TPM) with orthogonally arranged fixed actuators is proposed in this paper. The mobility of the manipulator is analyzed via screw theory. The inverse kinematics, forward kinematics, and velocity analyses are performed and the singularities and isotropic configurations are investigated in details afterwards. Under different cases of physical constraints imposed by mechanical joints, the reachable workspace of the manipulator is geometrically generated and compared. Especially, it is illustrated that the manipulator in principle possesses a fairly regular like workspace with a maximum cuboid defined as the usable workspace inscribed and one isotropic configuration involved. Furthermore, the singularity within the usable workspace is verified, and simulation results show that there exist no any singular configurations within the specified workspace. Therefore, the presented new manipulator has a great potential for high precision industrial applications such as assembly, machining, etc.

Multi-position Dimensional Synthesis of a Spatial 3-RPS Parallel Manipulator

2005 ◽  
Vol 128 (4) ◽  
pp. 815-819 ◽  
Author(s):  
Nalluri Mohan Rao ◽  
K. Mallikarjuna Rao
Keyword(s):  
Approximation Method ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Least Square ◽  
Dimensional Synthesis ◽  
Modified Method ◽  
Moving Platform ◽  
Position Synthesis

This paper presents dimensional synthesis of a 3 degrees of freedom (DOF) spatial 3-revolute-prismatic-spherical (RPS) parallel manipulator. Tsai and Kim ((2003) ASME J. Mech. Des., 125, pp. 92–97) have shown that the dimensional synthesis can be carried out for at the most six prescribed positions and orientations of the moving platform. The method of synthesis is modified (least-square technique) to make it possible to synthesize the 3-RPS manipulator for any number of positions and orientations of the moving platform. The effectiveness of the modified method of synthesis is demonstrated by considering an example for ten-position synthesis. The modified method of synthesis is an approximation method.

Sign in / Sign up

Export Citation Format

Share Document