Reynolds Number Dependence of Zero Pressure Gradient Turbulent Boundary Layers Including Third-Order Moments and Spatial Correlations

2020 ◽  
Vol 142 (5) ◽  
Author(s):  
Ralph J. Volino
Keyword(s):  
Reynolds Number ◽  
Pressure Gradient ◽  
Boundary Layers ◽  
Field Measurements ◽  
Turbulent Boundary Layers ◽  
Quadrant Analysis ◽  
Shear Stresses ◽  
Reynolds Stresses ◽  
Spatial Correlations ◽  
Mean Velocity

Abstract Measurements were made in zero pressure gradient turbulent boundary layers on a smooth wall, at momentum thickness Reynolds numbers, ranging from 800 to 6340. The experiments were conducted in a recirculating water tunnel. Two-component velocity profiles were acquired using laser Doppler velocimetry at five streamwise stations and three different freestream velocities. Velocity field measurements were acquired using particle image velocimetry in streamwise-wall normal and streamwise–spanwise planes. Profiles of mean velocity and turbulence statistics including the Reynolds normal and shear stresses, and triple products of the velocity fluctuations are presented in both inner and outer coordinates. Variations in the profiles at representative distances from the wall are presented and quantified as functions of Reynolds number. The triple products are explained in terms of transport of Reynolds stresses though motions associated with quadrant analysis, and variation with Reynolds number is consistent with that of Reynolds stresses. The structure of turbulence was considered through two-point correlations of the fluctuations in velocity fields. In general, the shape and inclination angles of the structures did not change with Reynolds number, but some streamwise and spanwise growth was observed as Reynolds number increased.

Scaling of Favorable Pressure Gradient Turbulent Boundary Layers With Eventual Relaminarization

2005 ◽  
Author(s):  
Rau´l Bayoa´n Cal ◽  
Xia Wang ◽  
Luciano Castillo
Keyword(s):  
Boundary Layer ◽  
Pressure Gradient ◽  
Boundary Layers ◽  
Reynolds Shear Stress ◽  
Velocity Profiles ◽  
Turbulent Boundary Layers ◽  
Reynolds Stresses ◽  
Mean Velocity ◽  
Favorable Pressure Gradient ◽  
The Mean

Applying similarity analysis to the RANS equations of motion for a pressure gradient turbulent boundary layer, Castillo and George [1] obtained the scalings for the mean deficit velocity and the Reynolds stresses. Following this analysis, Castillo and George studied favorable pressure gradient (FPG) turbulent boundary layers. They were able to obtain a single curve for FPG flows when scaling the mean deficit velocity profiles. In this study, FPG turbulent boundary layers are analyzed as well as relaminarized boundary layers subjected to an even stronger FPG. It is found that the mean deficit velocity profiles diminish when scaled using the Castillo and George [1] scaling, U∞, and the Zagarola and Smits [2] scaling, U∞δ*/δ. In addition, Reynolds stress data has been analyzed and it is found that the relaminarized boundary layer data decreases drastically in all components of the Reynolds stresses. Furthermore, it will be shown that the shape of the profile for the wall-normal and Reynolds shear stress components change drastically given the relaminarized state. Therefore, the mean velocity deficit profiles as well as Reynolds stresses are found to be necessary in order to understand not only FPG flows, but also relaminarized boundary layers.

Pressure Gradient Effects on Smooth- and Rough-Surface Turbulent Boundary Layers—Part II: Adverse Pressure Gradient

2014 ◽  
Vol 137 (1) ◽  
Author(s):  
Ju Hyun Shin ◽  
Seung Jin Song
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Pressure Gradient ◽  
Boundary Layers ◽  
Boundary Layer Thickness ◽  
Adverse Pressure Gradient ◽  
Turbulent Boundary Layers ◽  
Roughness Effects ◽  
Mean Velocity ◽  
Velocity Defect

An experimental investigation has been conducted to identify the effects of pressure gradient and surface roughness on turbulent boundary layers. In Part II, smooth- and rough-surface turbulent boundary layers with and without adverse pressure gradient (APG) are presented at a fixed Reynolds number (based on the length of flat plate) of 900,000. Flat-plate boundary layer measurements have been conducted using a single-sensor, hot-wire probe. For smooth surfaces, compared to the zero pressure gradient (ZPG) boundary layer, the APG boundary layer has a higher mean velocity defect throughout the boundary layer and lower friction coefficient. APG decreases the streamwise normal Reynolds stress for y less than 0.4 times the boundary layer thickness and increases it slightly in the outer region. For rough surfaces, APG reduces the roughness effects of increasing the mean velocity defect and normal Reynolds stress for y less than 23 and 28 times the average roughness height, respectively. Consistently, for the same roughness, APG decreases the integrated streamwise turbulent kinetic energy. APG also decreases the roughness effect on the friction coefficient, roughness Reynolds number, and roughness shift. Compared to the ZPG boundary layers, the roughness effects on integral boundary layer parameters—boundary layer thickness and momentum thickness—are weaker under APG. Thus, contrary to the favorable pressure gradient (FPG) in part I, APG reduces the roughness effects on turbulent boundary layers.

History effects and near equilibrium in adverse-pressure-gradient turbulent boundary layers

2017 ◽  
Vol 820 ◽  
pp. 667-692 ◽  
Author(s):  
A. Bobke ◽  
R. Vinuesa ◽  
R. Örlü ◽  
P. Schlatter
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Pressure Gradient ◽  
Boundary Layers ◽  
Adverse Pressure Gradient ◽  
Turbulent Boundary Layers ◽  
Mean Velocity ◽  
History Effects ◽  
Displacement Thickness ◽  
Gradient Parameter

Turbulent boundary layers under adverse pressure gradients are studied using well-resolved large-eddy simulations (LES) with the goal of assessing the influence of the streamwise pressure-gradient development. Near-equilibrium boundary layers were characterized through the Clauser pressure-gradient parameter $\unicode[STIX]{x1D6FD}$. In order to fulfil the near-equilibrium conditions, the free stream velocity was prescribed such that it followed a power-law distribution. The turbulence statistics pertaining to cases with a constant value of $\unicode[STIX]{x1D6FD}$ (extending up to approximately 40 boundary-layer thicknesses) were compared with cases with non-constant $\unicode[STIX]{x1D6FD}$ distributions at matched values of $\unicode[STIX]{x1D6FD}$ and friction Reynolds number $Re_{\unicode[STIX]{x1D70F}}$. An additional case at matched Reynolds number based on displacement thickness $Re_{\unicode[STIX]{x1D6FF}^{\ast }}$ was also considered. It was noticed that non-constant $\unicode[STIX]{x1D6FD}$ cases appear to approach the conditions of equivalent constant $\unicode[STIX]{x1D6FD}$ cases after long streamwise distances (approximately 7 boundary-layer thicknesses). The relevance of the constant $\unicode[STIX]{x1D6FD}$ cases lies in the fact that they define a ‘canonical’ state of the boundary layer, uniquely characterized by $\unicode[STIX]{x1D6FD}$ and $Re$. The investigations on the flat plate were extended to the flow around a wing section overlapping in terms of $\unicode[STIX]{x1D6FD}$ and $Re$. Comparisons with the flat-plate cases at matched values of $\unicode[STIX]{x1D6FD}$ and $Re$ revealed that the different development history of the turbulent boundary layer on the wing section leads to a less pronounced wake in the mean velocity as well as a weaker second peak in the Reynolds stresses. This is due to the weaker accumulated effect of the $\unicode[STIX]{x1D6FD}$ history. Furthermore, a scaling law suggested by Kitsios et al. (Intl J. Heat Fluid Flow, vol. 61, 2016, pp. 129–136), proposing the edge velocity and the displacement thickness as scaling parameters, was tested on two constant-pressure-gradient parameter cases. The mean velocity and Reynolds-stress profiles were found to be dependent on the downstream development. The present work is the first step towards assessing history effects in adverse-pressure-gradient turbulent boundary layers and highlights the fact that the values of the Clauser pressure-gradient parameter and the Reynolds number are not sufficient to characterize the state of the boundary layer.

Measurements in adverse-pressure-gradient turbulent boundary layers with a step change in surface roughness

1975 ◽  
Vol 70 (3) ◽  
pp. 573-593 ◽  
Author(s):  
W. H. Schofield
Keyword(s):  
Surface Roughness ◽  
Pressure Gradient ◽  
Boundary Layers ◽  
Leading Edge ◽  
Adverse Pressure Gradient ◽  
Turbulent Boundary Layers ◽  
Step Change ◽  
Internal Layer ◽  
Mean Velocity ◽  
Law Of The Wall

The response of turbulent boundary layers to sudden changes in surface roughness under adverse-pressure-gradient conditions has been studied experimentally. The roughness used was in the ‘d’ type array of Perry, Schofield & Joubert (1969). Two cases of a rough-to-smooth change in surface roughness were considered in the same arbitrary adverse pressure gradient. The two cases differed in the distance of the surface discontinuity from the leading edge and gave two sets of flow conditions for the establishment and growth of the internal layer which develops downstream from a change in surface roughness. These conditions were in turn different from those in the zero-pressure-gradient experiments of Antonia & Luxton. The results suggest that the growth of the new internal layer depends solely on the new conditions at the wall and scales with the local roughness length of that wall. Mean velocity profiles in the region after the step change in roughness were accurately described by Coles’ law of the wall-law of the wake combination, which contrasts with the zero-pressure-gradient results of Antonia & Luxton. The skin-friction coefficient after the step change in roughness did not overshoot the equilibrium distribution but made a slow adjustment downstream of the step. Comparisons of mean profiles indicate that similar defect profile shapes are produced in layers with arbitrary adverse pressure gradients at positions where the values of Clauser's equilibrium parameter β (= δ*τ−10dp/dx) are similar, provided that the pressure-gradient history and local values of the pressure gradient are also similar.

Pressure gradient effects on the large-scale structure of turbulent boundary layers

2013 ◽  
Vol 715 ◽  
pp. 477-498 ◽  
Author(s):  
Zambri Harun ◽  
Jason P. Monty ◽  
Romain Mathis ◽  
Ivan Marusic
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Pressure Gradient ◽  
Boundary Layers ◽  
Amplitude Modulation ◽  
Large Scale ◽  
Outer Region ◽  
Adverse Pressure Gradient ◽  
Turbulent Boundary Layers ◽  
Small Scale

AbstractResearch into high-Reynolds-number turbulent boundary layers in recent years has brought about a renewed interest in the larger-scale structures. It is now known that these structures emerge more prominently in the outer region not only due to increased Reynolds number (Metzger & Klewicki, Phys. Fluids, vol. 13(3), 2001, pp. 692–701; Hutchins & Marusic, J. Fluid Mech., vol. 579, 2007, pp. 1–28), but also when a boundary layer is exposed to an adverse pressure gradient (Bradshaw, J. Fluid Mech., vol. 29, 1967, pp. 625–645; Lee & Sung, J. Fluid Mech., vol. 639, 2009, pp. 101–131). The latter case has not received as much attention in the literature. As such, this work investigates the modification of the large-scale features of boundary layers subjected to zero, adverse and favourable pressure gradients. It is first shown that the mean velocities, turbulence intensities and turbulence production are significantly different in the outer region across the three cases. Spectral and scale decomposition analyses confirm that the large scales are more energized throughout the entire adverse pressure gradient boundary layer, especially in the outer region. Although more energetic, there is a similar spectral distribution of energy in the wake region, implying the geometrical structure of the outer layer remains universal in all cases. Comparisons are also made of the amplitude modulation of small scales by the large-scale motions for the three pressure gradient cases. The wall-normal location of the zero-crossing of small-scale amplitude modulation is found to increase with increasing pressure gradient, yet this location continues to coincide with the large-scale energetic peak wall-normal location (as has been observed in zero pressure gradient boundary layers). The amplitude modulation effect is found to increase as pressure gradient is increased from favourable to adverse.

Governing Parameters of Adverse Pressure Gradient Turbulent Boundary Layers

2018 ◽  
Author(s):  
Yvan Maciel ◽  
Tie Wei ◽  
Ayse G. Gungor ◽  
Mark P. Simens
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Pressure Gradient ◽  
Boundary Layers ◽  
Outer Region ◽  
Adverse Pressure Gradient ◽  
Turbulent Boundary Layers ◽  
Inertial Parameter ◽  
Velocity Scale ◽  
Gradient Parameter

We perform a careful nondimensional analysis of the turbulent boundary layer equations in order to bring out, without assuming any self-similar behaviour, a consistent set of nondimensional parameters characterizing the outer region of turbulent boundary layers with arbitrary pressure gradients. These nondimensional parameters are a pressure gradient parameter, a Reynolds number (different from commonly used ones) and an inertial parameter. They are obtained without assuming a priori the outer length and velocity scales. They represent the ratio of the magnitudes of two types of forces in the outer region, using the Reynolds shear stress gradient (apparent turbulent force) as the reference force: inertia to apparent turbulent forces for the inertial parameter, pressure to apparent turbulent forces for the pressure gradient parameter and apparent turbulent to viscous forces for the Reynolds number. We determine under what conditions they retain their meaning, depending on the outer velocity scale that is considered, with the help of seven boundary layer databases. We find the impressive result that if the Zagarola-Smits velocity is used as the outer velocity scale, the streamwise evolution of the three ratios of forces in the outer region can be accurately followed with these non-dimensional parameters in all these flows — not just the order of magnitude of these ratios. This cannot be achieved with three other outer velocity scales commonly used for pressure gradient turbulent boundary layers. Consequently, the three new nondimensional parameters, when expressed with the Zagarola-Smits velocity, can be used to follow — in a global sense — the streamwise evolution of the stream-wise mean momentum balance in the outer region. This study provides a clear and consistent framework for the analysis of the outer region of adverse-pressure-gradient turbulent boundary layers.

scholarly journals Turbulence, entrainment and low-order description of a transitional variable-density jet

2017 ◽  
Vol 836 ◽  
pp. 1009-1049 ◽  
Author(s):  
B. Viggiano ◽  
T. Dib ◽  
N. Ali ◽  
L. G. Mastin ◽  
R. B. Cal ◽  
...  
Keyword(s):  
Reynolds Number ◽  
Turbulent Jets ◽  
Reynolds Numbers ◽  
Variable Density ◽  
Quadrant Analysis ◽  
Shear Stresses ◽  
Reynolds Stresses ◽  
Buoyant Jet ◽  
Entrainment Ratio ◽  
Turbulent Reynolds Number

Geophysical flows occur over a large range of scales, with Reynolds numbers and Richardson numbers varying over several orders of magnitude. For this study, jets of different densities were ejected vertically into a large ambient region, considering conditions relevant to some geophysical phenomena. Using particle image velocimetry, the velocity fields were measured for three different gases exhausting into air – specifically helium, air and argon. Measurements focused on both the jet core and the entrained ambient. Experiments considered relatively low Reynolds numbers from approximately 1500 to 10 000 with Richardson numbers near 0.001 in magnitude. These included a variety of flow responses, notably a nearly laminar jet, turbulent jets and a transitioning jet in between. Several features were studied, including the jet development, the local entrainment ratio, the turbulent Reynolds stresses and the eddy strength. Compared to a fully turbulent jet, the transitioning jet showed up to 50 % higher local entrainment and more significant turbulent fluctuations. For this condition, the eddies were non-axisymmetric and larger than the exit radius. For turbulent jets, the eddies were initially smaller and axisymmetric while growing with the shear layer. At lower turbulent Reynolds number, the turbulent stresses were more than 50 % higher than at higher turbulent Reynolds number. In either case, the low-density jet developed faster than a comparable non-buoyant jet. Quadrant analysis and proper orthogonal decomposition were also utilized for insight into the entrainment of the jet, as well as to assess the energy distribution with respect to the number of eigenmodes. Reynolds shear stresses were dominant in Q1 and Q3 and exhibited negligible contributions from the remaining two quadrants. Both analysis techniques showed that the development of stresses downstream was dependent on the Reynolds number while the spanwise location of the stresses depended on the Richardson number.

Lateral straining of turbulent boundary layers. Part 2. Streamline convergence

1997 ◽  
Vol 349 ◽  
pp. 1-30 ◽  
Author(s):  
N. R. PANCHAPAKESAN ◽  
T. B. NICKELS ◽  
P. N. JOUBERT ◽  
A. J. SMITS
Keyword(s):  
Pressure Gradient ◽  
Boundary Layers ◽  
Turbulent Transport ◽  
Turbulent Boundary Layers ◽  
Local Effect ◽  
Wall Region ◽  
Reynolds Stresses ◽  
Mean Flow ◽  
Dimensional Parameter ◽  
Outer Flow

Experimental measurements are presented showing the effects of streamline convergence on developing turbulent boundary layers. The longitudinal pressure-gradient in these experiments is nominally zero so the only extra rate-of-strain is the lateral convergence. Measurements have been made of mean flow and turbulence quantities at two different Reynolds numbers. The results show that convergence leads to a significant reduction in the skin-friction and an increase in the boundary layer thickness. There are also large changes in the Reynolds stresses with reductions occurring in the inner region and some increase in the outer flow. This is in contrast to the results of Saddoughi & Joubert (1991) for a diverging flow of the same included angle and zero pressure-gradient which show much smaller changes in the stresses and an approach to equilibrium. A new non-dimensional parameter, βD, is proposed to characterize the local effect of the convergence and it is shown how this parameter is related to Clauser's pressure-gradient parameter, βx. It is suggested that this is an equilibrium parameter for turbulent boundary layers with lateral straining. In the present flow case βD increases rapidly with streamwise distance leading to a significant departure from equilibrium. Measurement of terms in the transport equations suggest that streamline convergence leads to a reduction in production and generation and large increases in mean advection. The recovery of the flow after the removal of convergence has been shown to be characterized by a significant increase in the turbulent transport of shear-stress and turbulent kinetic energy from the very near-wall region to the flow further out where the stresses have been depleted by convergence.

Reynolds Number and Pressure Gradient Effects on Compressible Turbulent Boundary Layers

AIAA Journal ◽  
1978 ◽  
Vol 16 (12) ◽  
pp. 1217-1218 ◽  
Author(s):  
M. Acharya ◽  
M. I. Kussoy ◽  
C. C. Horstman
Keyword(s):  
Reynolds Number ◽  
Pressure Gradient ◽  
Boundary Layers ◽  
Turbulent Boundary Layers ◽  
Gradient Effects

Turbulent Boundary Layers in Low Reynolds Number Shallow Open Channel Flows

1999 ◽  
Vol 121 (3) ◽  
pp. 684-689 ◽  
Author(s):  
Ram Balachandar ◽  
Shyam S. Ramachandran
Keyword(s):  
Reynolds Number ◽  
Boundary Layers ◽  
Open Channel ◽  
Reynolds Numbers ◽  
Skin Friction Coefficient ◽  
Turbulent Boundary Layers ◽  
Channel Flows ◽  
Open Channel Flows ◽  
Mean Velocity ◽  
Low Reynolds

The results of an experimental investigation of turbulent boundary layers in shallow open channel flows at low Reynolds numbers are presented. The study was aimed at extending the database toward lower values of Reynolds number. The data presented are primarily concerned with the longitudinal mean velocity, turbulent-velocity fluctuations, boundary layer shape parameter and skin friction coefficient for Reynolds numbers based on the momentum thickness (Reθ) ranging from 180 to 480. In this range, the results of the present investigation in shallow open channel flows indicate a lack of dependence of the von Karman constant κ on Reynolds number. The extent to which the mean velocity data overlaps with the log-law decreases with decreasing Reθ. The variation of the strength of the wake with Reθ is different from the trend proposed earlier by Coles.

Sign in / Sign up

Export Citation Format

Share Document