Approximation Model for Radiation Impedance of a Square Piston Source on an Infinite Planar Baffle

2019 ◽  
Vol 142 (1) ◽  
Author(s):  
John Valacas
Keyword(s):  
Transfer Functions ◽  
Approximation Error ◽  
Dimensionless Frequency ◽  
Approximation Model ◽  
Model Accuracy ◽  
Radiation Impedance ◽  
Wide Range ◽  
Finite Sum ◽  
Infinite Planar ◽  
Better Than

Abstract Approximation models based on a finite sum of Bessel functions of the first kind and a pair of simple rational transfer functions are proposed for radiation resistance and reactance of a square piston source mounted on an infinite planar baffle. Model accuracy is better than 1.6% for reactance and 0.5% for resistance within a very wide range of dimensionless frequency k√S (0.1–100). The very low and high frequency behaviors of radiation impedance are incorporated into the models' closed-form expressions so that the approximation error outside the specified frequency range tends to zero.

Research of the activity and viability of spermatozoa at different concentrations and proportions of diluents after incubation

2020 ◽  
pp. 88-95
Author(s):  
Svitlana Lobchenko ◽  
Tetiana Husar ◽  
Viktor Lobchenko
Keyword(s):  
Plasma Concentration ◽  
Incubation Time ◽  
Coefficient Of Variation ◽  
Incubation Medium ◽  
Wide Range ◽  
Series Of Experiments ◽  
The Subject ◽  
Boar Spermatozoa ◽  
Native Plasma ◽  
Better Than

The results of studies of the viability of spermatozoa with different incubation time at different concentrations and using different diluents are highlighted in the article. (Un) concentrated spermatozoa were diluented: 1) with their native plasma; 2) medium 199; 3) a mixture of equal volumes of plasma and medium 199. The experiment was designed to generate experimental samples with spermatozoa concentrations prepared according to the method, namely: 0.2; 0.1; 0.05; 0.025 billion / ml. The sperm was evaluated after 2, 4, 6 and 8 hours. The perspective of such a study is significant and makes it possible to research various aspects of the subject in a wide range. In this regard, a series of experiments were conducted in this area. The data obtained are statistically processed and allow us to highlight the results that relate to each stage of the study. In particular, in this article it was found out some regularities between the viability of sperm, the type of diluent and the rate of rarefaction, as evidenced by the data presented in the tables. As a result of sperm incubation, the viability of spermatozoa remains at least the highest trend when sperm are diluted to a concentration of 0.1 billion / ml, regardless of the type of diluent used. To maintain the viability of sperm using this concentration of medium 199 is not better than its native plasma, and its mixture with an equal volume of plasma through any length of time incubation of such sperm. Most often it is at this concentration of sperm that their viability is characterized by the lowest coefficient of variation, regardless of the type of diluent used, which may indicate the greatest stability of the result under these conditions. The viability of spermatozoa with a concentration of 0.1 billion / ml is statistically significantly reduced only after 6 or even 8 hours of incubation. If the sperm are incubated for only 2 hours, regardless of the type of diluent used, the sperm concentrations tested do not affect the viability of the sperm. Key words: boar, spermatozoa, sperm plasma, concentration, incubation, medium 199, activity, viability, rarefaction.

Effect of Contact Ratio on Spur Gear Dynamic Load With No Tooth Profile Modifications

1996 ◽  
Vol 118 (3) ◽  
pp. 439-443 ◽  
Author(s):  
Chuen-Huei Liou ◽  
Hsiang Hsi Lin ◽  
F. B. Oswald ◽  
D. P. Townsend
Keyword(s):  
Dynamic Load ◽  
Spur Gear ◽  
Tooth Size ◽  
Contact Ratio ◽  
Gear Dynamics ◽  
Wide Range ◽  
Gear Contact ◽  
Center Distance ◽  
Selection Of ◽  
Better Than

This paper presents a computer simulation showing how the gear contact ratio affects the dynamic load on a spur gear transmission. The contact ratio can be affected by the tooth addendum, the pressure angle, the tooth size (diametral pitch), and the center distance. The analysis presented in this paper was performed by using the NASA gear dynamics code DANST. In the analysis, the contact ratio was varied over the range 1.20 to 2.40 by changing the length of the tooth addendum. In order to simplify the analysis, other parameters related to contact ratio were held constant. The contact ratio was found to have a significant influence on gear dynamics. Over a wide range of operating speeds, a contact ratio close to 2.0 minimized dynamic load. For low-contact-ratio gears (contact ratio less than two), increasing the contact ratio reduced gear dynamic load. For high-contact-ratio gears (contact ratio equal to or greater than 2.0), the selection of contact ratio should take into consideration the intended operating speeds. In general, high-contact-ratio gears minimized dynamic load better than low-contact-ratio gears.

scholarly journals Two-stage segment linearization as part of the thermocouple measurement chain

2021 ◽  
Vol 54 (1-2) ◽  
pp. 141-151
Author(s):  
Dragan Živanović ◽  
Milan Simić
Keyword(s):  
Transfer Functions ◽  
Approximation Error ◽  
Linearization Method ◽  
Linear Segment ◽  
Virtual Instrumentation ◽  
Memory Consumption ◽  
Thermocouple Measurement ◽  
Two Stage ◽  
Approximation Errors ◽  
Input Range

An implementation of a two-stage piece-wise linearization method for reduction of the thermocouple approximation error is presented in the paper. First, the whole thermocouple measurement chain of a transducer is described, and possible error is analysed to define the required level of accuracy for linearization of the transfer characteristics. Evaluation of linearization functions and analysis of approximation errors are performed by the virtual instrumentation software package LabVIEW. The method is appropriate for thermocouples and other sensors where nonlinearity varies a lot over the range of input values. The basic principle of this method is to first transform the abscissa of the transfer function by a linear segment look-up table in such a way that significantly nonlinear parts of the input range are expanded before a standard piece-wise linearization. In this way, applying equal-segment linearization two times has a similar effect to non-equal-segment linearization. For a given examples of the thermocouple transfer functions, the suggested method provides significantly better reduction of the approximation error, than the standard segment linearization, with equal memory consumption for look-up tables. The simple software implementation of this two-stage linearization method allows it to be applied in low calculation power microcontroller measurement transducers, as a replacement of the standard piece-wise linear approximation method.

scholarly journals Cache-efficient sweeping-based interval joins for extended Allen relation predicates

2021 ◽  
Author(s):  
Danila Piatov ◽  
Sven Helmer ◽  
Anton Dignös ◽  
Fabio Persia
Keyword(s):  
Data Structure ◽  
Experimental Evaluation ◽  
State Of The Art ◽  
Temporal Databases ◽  
Access Method ◽  
Wide Range ◽  
Interval Relation ◽  
Cache Efficient ◽  
Join Algorithms ◽  
Better Than

AbstractWe develop a family of efficient plane-sweeping interval join algorithms for evaluating a wide range of interval predicates such as Allen’s relationships and parameterized relationships. Our technique is based on a framework, components of which can be flexibly combined in different manners to support the required interval relation. In temporal databases, our algorithms can exploit a well-known and flexible access method, the Timeline Index, thus expanding the set of operations it supports even further. Additionally, employing a compact data structure, the gapless hash map, we utilize the CPU cache efficiently. In an experimental evaluation, we show that our approach is several times faster and scales better than state-of-the-art techniques, while being much better suited for real-time event processing.

scholarly journals Transformed Structural Properties Method to Determine the Controllability and Observability of Robots

2021 ◽  
Vol 11 (7) ◽  
pp. 3082
Author(s):  
Dany Ivan Martinez ◽  
José de Jesús Rubio ◽  
Victor Garcia ◽  
Tomas Miguel Vargas ◽  
Marco Antonio Islas ◽  
...  
Keyword(s):  
Structural Properties ◽  
Approximation Error ◽  
Linearization Method ◽  
Controllability And Observability ◽  
Better Than

Many investigations use a linearization method, and others use a structural properties method to determine the controllability and observability of robots. In this study, we propose a transformed structural properties method to determine the controllability and observability of robots, which is the combination of the linearization and the structural properties methods. The proposed method uses a transformation in the robot model to obtain a linear robot model with the gravity terms and uses the linearization of the gravity terms to obtain the linear robot model; this linear robot model is used to determine controllability and observability. The described combination evades the structural conditions requirement and decreases the approximation error. The proposed method is better than previous methods because the proposed method can obtain more precise controllability and observability results. The modified structural properties method is compared with the linearization method to determine the controllability and observability of three robots.

Triazole, Benzotriazole, and Naphthotriazole as Corrosion Inhibitors for Brass

CORROSION ◽  
1976 ◽  
Vol 32 (10) ◽  
pp. 414-417 ◽  
Author(s):  
R. WALKER
Keyword(s):  
Corrosion Inhibitors ◽  
Lower Cost ◽  
Solution Ph ◽  
Inhibitor Efficiency ◽  
Wide Range ◽  
Better Than

Abstract The use of triazole, benzotriazole, and naphthotriazole as corrosion inhibitors for brass is briefly reviewed. The corrosion of 70/30 brass immersed in a wide range of solutions is reported both with and without the inhibitors. The inhibitor efficiency of benzotriazole is given as a function of the solution pH and the concentration used. Triazole was only effective in mildly corrosive solutions and benzotriazole and naphthotriazole were much better. Generally naphthotriazole was better than benzotriazole but is much more expensive and a higher concentration of benzotriazole can give the same protection as naphthotriazole at a much lower cost.

Poisson mixtures

1995 ◽  
Vol 1 (2) ◽  
pp. 163-190 ◽  
Author(s):  
Kenneth W. Church ◽  
William A. Gale
Keyword(s):  
Negative Binomial ◽  
Probability Distributions ◽  
Hidden Variables ◽  
Heterogeneous Structure ◽  
Text Compression ◽  
Inverse Document Frequency ◽  
Poisson Mixtures ◽  
Document Frequency ◽  
Wide Range ◽  
Better Than

AbstractShannon (1948) showed that a wide range of practical problems can be reduced to the problem of estimating probability distributions of words and ngrams in text. It has become standard practice in text compression, speech recognition, information retrieval and many other applications of Shannon's theory to introduce a “bag-of-words” assumption. But obviously, word rates vary from genre to genre, author to author, topic to topic, document to document, section to section, and paragraph to paragraph. The proposed Poisson mixture captures much of this heterogeneous structure by allowing the Poisson parameter θ to vary over documents subject to a density function φ. φ is intended to capture dependencies on hidden variables such genre, author, topic, etc. (The Negative Binomial is a well-known special case where φ is a Г distribution.) Poisson mixtures fit the data better than standard Poissons, producing more accurate estimates of the variance over documents (σ2), entropy (H), inverse document frequency (IDF), and adaptation (Pr(x ≥ 2/x ≥ 1)).

scholarly journals 3 per cent-accurate predictions for the clustering of dark matter, haloes, and subhaloes, over a wide range of cosmologies and scales

2020 ◽  
Vol 499 (4) ◽  
pp. 4905-4917
Author(s):  
S Contreras ◽  
R E Angulo ◽  
M Zennaro ◽  
G Aricò ◽  
M Pellejero-Ibañez
Keyword(s):  
Dark Matter ◽  
Spatial Distribution ◽  
Cosmological Parameters ◽  
Galaxy Surveys ◽  
Circular Velocity ◽  
Initial Application ◽  
Wide Range ◽  
Massive Neutrinos ◽  
Dynamical Dark Energy ◽  
Better Than

ABSTRACT Predicting the spatial distribution of objects as a function of cosmology is an essential ingredient for the exploitation of future galaxy surveys. In this paper, we show that a specially designed suite of gravity-only simulations together with cosmology-rescaling algorithms can provide the clustering of dark matter, haloes, and subhaloes with high precision. Specifically, with only three N-body simulations, we obtain the power spectrum of dark matter at z = 0 and 1 to better than 3 per cent precision for essentially all currently viable values of eight cosmological parameters, including massive neutrinos and dynamical dark energy, and over the whole range of scales explored, 0.03 < $k/{h}^{-1}\, {\rm Mpc}^{-1}$ < 5. This precision holds at the same level for mass-selected haloes and for subhaloes selected according to their peak maximum circular velocity. As an initial application of these predictions, we successfully constrain Ωm, σ8, and the scatter in subhalo-abundance-matching employing the projected correlation function of mock SDSS galaxies.

Fluctuating Forces in U-Tubes Subjected to Internal Two-Phase Flow

2005 ◽  
Author(s):  
Jean-Luc Riverin ◽  
Michel J. Pettigrew
Keyword(s):  
Two Phase Flow ◽  
Periodic Structures ◽  
Internal Flow ◽  
Resonance Phenomenon ◽  
Dimensionless Frequency ◽  
Phase Flow ◽  
Two Phase ◽  
Power Spectral ◽  
Wide Range ◽  
Periodic Components

Severe in-plane vibrations were observed in a series of 20-mm dia. PVC vertical U-tubes of different elbow geometries subjected to air-water internal flow. An experimental study was undertaken to investigate the excitation mechanism. Vibration response, excitation forces and fluctuating properties of two-phase flow were measured over a wide range of flow conditions. The experimental results show that the observed vibrations are due to a resonance phenomenon between periodic momentum flux fluctuations of two-phase flow and the first modes of U-tubes. The excitation forces consist of a combination of narrow-band and periodic components, with a predominant frequency that increases proportionally to flow velocity. For a given void fraction, the force spectra for various flow velocities and elbow geometries coincide generally well on a plot of the normalized power spectral density as a function of a dimensionless frequency. The predominant frequencies of excitation agree with recent results on the characteristics of periodic structures in two-phase flow.

Transient Temperature Involving Oscillatory Heat Source With Application in Fretting Contact

2007 ◽  
Vol 129 (3) ◽  
pp. 517-527 ◽  
Author(s):  
Jun Wen ◽  
M. M. Khonsari
Keyword(s):  
Heat Source ◽  
Oscillation Amplitude ◽  
The Body ◽  
Transient Temperature ◽  
Dimensionless Frequency ◽  
Heat Sources ◽  
Infinite Body ◽  
Fitting Method ◽  
Wide Range ◽  
Analytical Expressions

An analytical approach for treating problems involving oscillatory heat source is presented. The transient temperature profile involving circular, rectangular, and parabolic heat sources undergoing oscillatory motion on a semi-infinite body is determined by integrating the instantaneous solution for a point heat source throughout the area where the heat source acts with an assumption that the body takes all the heat. An efficient algorithm for solving the governing equations is developed. The results of a series simulations are presented, covering a wide range of operating parameters including a new dimensionless frequency ω¯=ωl2∕4α and the dimensionless oscillation amplitude A¯=A∕l, whose product can be interpreted as the Peclet number involving oscillatory heat source, Pe=ω¯A¯. Application of the present method to fretting contact is presented. The predicted temperature is in good agreement with published literature. Furthermore, analytical expressions for predicting the maximum surface temperature for different heat sources are provided by a surface-fitting method based on an extensive number of simulations.

Sign in / Sign up

Export Citation Format

Share Document