Erosion in a Melt-Infiltrated SiC/SiC Ceramic Matrix Composite

2020 ◽  
Vol 142 (4) ◽  
Author(s):  
M. J. Presby ◽  
C. Gong ◽  
S. Kane ◽  
N. Kedir ◽  
A. Stanley ◽  
...  
Keyword(s):  
Ceramic Matrix Composite ◽  
Ceramic Matrix Composites ◽  
Ceramic Matrix ◽  
Matrix Composites ◽  
Erosion Behavior ◽  
Sic Ceramic ◽  
Material Systems ◽  
Nominal Density ◽  
Analytical Tools ◽  
Matrix Hardness

Abstract Erosion phenomenon of ceramic matrix composites (CMCs), attributed to their unique architectural configurations, is markedly different from conventional monolithic ceramic counterparts. Prior to further integration of CMCs into hot-section components of aeroengines subject to erosive environments, their erosion behavior needs to be characterized, analyzed, and formulated. The erosion behavior of a 2D woven melt-infiltrated (MI) SiC/SiC CMC was assessed in this work as a function of variables such as particle velocity and size. The erosion damage was characterized using appropriate analytical tools such as optical and scanning electron microscopy (SEM). A phenomenological erosion model was developed for SiC/SiC CMC material systems with respect to the kinetic energy of impacting particles in conjunction with nominal density, matrix hardness, and elastic modulus of the SiC/SiC CMCs. The model was in reasonable agreement with the experimental data.

Erosion in an MI SiC/SiC Ceramic Matrix Composite (CMC)

2019 ◽  
Author(s):  
M. J. Presby ◽  
C. Gong ◽  
S. Kane ◽  
N. Kedir ◽  
A. Stanley ◽  
...  
Keyword(s):  
Ceramic Matrix Composite ◽  
Ceramic Matrix Composites ◽  
Ceramic Matrix ◽  
Matrix Composites ◽  
Erosion Behavior ◽  
Sic Ceramic ◽  
Material Systems ◽  
Nominal Density ◽  
Analytical Tools ◽  
Matrix Hardness

Abstract Erosion phenomenon of ceramic matrix composites (CMCs), attributed to their unique architectural configurations, is markedly different from conventional monolithic ceramic counterparts. Prior to further integration of CMCs into hot-section components of aeroengines subject to erosive environments, their erosion behavior needs to be characterized, analyzed, and formulated. The erosion behavior of a 2-D woven melt-infiltrated (MI) SiC/SiC CMC was assessed in this work as a function of variables such as particle velocity and size. The erosion damage was characterized using appropriate analytical tools such as optical and scanning electron microscopy (SEM). A phenomenological erosion model was developed for SiC/SiC CMC material systems with respect to kinetic energy of impacting particles in conjunction with nominal density, matrix hardness and elastic modulus of the SiC/SiC CMCs. The model was in reasonable agreement with the experimental data.

Erosion in Gas-Turbine Grade Ceramic Matrix Composites (CMCs)

2018 ◽  
Author(s):  
N. Kedir ◽  
C. Gong ◽  
L. Sanchez ◽  
M. J. Presby ◽  
S. Kane ◽  
...  
Keyword(s):  
Gas Turbine ◽  
Ceramic Matrix Composites ◽  
Ceramic Matrix ◽  
Matrix Composites ◽  
Erosion Behavior ◽  
Image Mapping ◽  
Material Systems ◽  
Multiple Material ◽  
Monolithic Ceramics ◽  
Matrix Hardness

Erosion behavior of a large number of gas-turbine grade ceramic matrix composites (CMCs) was assessed using fine to medium grain garnet erodents at velocities of 200 and 300 m/s at ambient temperature. The CMCs used in the current work were comprised of nine different SiC/SiCs, one SiC/C, one C/SiC, one SiC/MAS, and one oxide/oxide. Erosion damage was quantified with respect to erosion rate and the damage morphology was assessed via SEM and optical microscopy in conjunction with 3-D image mapping. The CMCs response to erosion appeared to be very complicated due to their architectural complexity, multiple material constituents, and presence of pores. Effects of architecture, material constituents, density, matrix hardness, and elastic modulus of the CMCs were taken into account and correlated to overall erosion behavior. The erosion of monolithic ceramics such as silicon carbide and silicon nitrides was also examined to gain a better understanding of the governing damage mechanisms for the CMC material systems used in this work.

Erosion in Gas-Turbine Grade Ceramic Matrix Composites

2018 ◽  
Vol 141 (1) ◽  
Author(s):  
N. Kedir ◽  
C. Gong ◽  
L. Sanchez ◽  
M. J. Presby ◽  
S. Kane ◽  
...  
Keyword(s):  
Gas Turbine ◽  
Three Dimensional ◽  
Ceramic Matrix Composites ◽  
Ceramic Matrix ◽  
Matrix Composites ◽  
Erosion Behavior ◽  
Image Mapping ◽  
Multiple Material ◽  
Monolithic Ceramics ◽  
Matrix Hardness

Erosion behavior of a large number of gas-turbine grade ceramic matrix composites (CMCs) was assessed using fine to medium grain garnet erodents at velocities of 200 and 300 m/s at ambient temperature. The CMCs used in the current work were comprised of nine different SiC/SiCs, one SiC/C, one C/SiC, one SiC/MAS, and one oxide/oxide. Erosion damage was quantified with respect to erosion rate and the damage morphology was assessed via scanning electron microscopy (SEM) and optical microscopy in conjunction with three-dimensional (3D) image mapping. The CMCs response to erosion appeared to be very complicated due to their architectural complexity, multiple material constituents, and presence of pores. Effects of architecture, material constituents, density, matrix hardness, and elastic modulus of the CMCs were taken into account and correlated to overall erosion behavior. The erosion of monolithic ceramics such as silicon carbide and silicon nitrides was also examined to gain a better understanding of the governing damage mechanisms for the CMC material systems used in this work.

Effect of Interfacial Treatment Process on the Microstructure and Properties of Cf/SiC Ceramic Matrix Composites

2012 ◽  
Vol 519 ◽  
pp. 277-280 ◽  
Author(s):  
Xiu Qian Li ◽  
Hai Peng Qiu ◽  
Jian Jiao ◽  
Jing Hua Luo ◽  
Yu Wang
Keyword(s):  
Fracture Toughness ◽  
Treatment Process ◽  
Ceramic Matrix Composite ◽  
Ceramic Matrix Composites ◽  
Ceramic Matrix ◽  
Mechanical Tests ◽  
Bending Test ◽  
High Temperature Treatment ◽  
Matrix Composites ◽  
Sic Ceramic

Abstract. This paper investigated the Cf/SiC ceramic matrix composites. By utilizing different interfacial treatment processes to prepare carbon-fiber preform, the preform was then densified by infiltration and pyrolysis(PIP) with polycarbosilan/xylene solution as precursor, and the Cf/SiC ceramic matrix composite specimens were fabricated. Mechanical tests such as bending test and fracture toughness were performed for Cf/SiC samples. The results show that the interfacial bonding strength in the sample with high-temperature treatment process was improved due to removing surface sizing. The samples which were treated up to 1400°C exhibited the highest three-point flexural strength, up to 595MPa; The samples which were treated up to 1400°C and deposited by pyrolytic carbon(PyC) coating shows the highest fracture toughness value which was 20.70MPa•m1/2.

Modeling of the Transition Layer in Ceramic Matrix Composites from Coal Wastes and Clay

2020 ◽  
Vol 299 ◽  
pp. 37-42
Author(s):  
O.A. Fomina ◽  
Andrey Yu. Stolboushkin
Keyword(s):  
Transition Layer ◽  
Raw Materials ◽  
Ceramic Matrix Composite ◽  
Ceramic Matrix Composites ◽  
Ceramic Matrix ◽  
Coal Waste ◽  
Matrix Composites ◽  
Carbonaceous Particles ◽  
The Core ◽  
Coal Wastes

A model of the transition layer between the shell and the core of a ceramic matrix composite from coal waste and clay has been developed. The chemical, granulometric and mineral compositions of the beneficiation of carbonaceous mudstones and clay were studied. The technological and ceramic properties of raw materials for the samples manufacturing were determined. The method of manufacturing multilayer ceramic samples from coal waste, clay and their mixture is given. The number of transition layers in the contact zone between the clay shell and the core from coal wastes is determined. The deformation and swelling phenomena of model samples from coal wastes, clay, and their mixtures were revealed at the firing temperature of more than 1000 °C. The formation of a reducing ambient in the center of the sample with insufficient air flow is shown. The influence of the carbonaceous particles amount and the ferrous form iron oxide in the coal wastes on the processes of expansion of multilayer samples during firing has been established.

scholarly journals Improved thermal stability of SiCf/SiC ceramic matrix composites fabricated by PIP process

2021 ◽  
Vol 15 (2) ◽  
pp. 164-169
Author(s):  
Jian Gu ◽  
Sea-Hoon Lee ◽  
Daejong Kim ◽  
Hee-Soo Lee ◽  
Jun-Seop Kim
Keyword(s):  
Thermal Stability ◽  
Ceramic Matrix Composites ◽  
Ceramic Matrix ◽  
Matrix Composites ◽  
Sic Fiber ◽  
Sic Ceramic ◽  
Different Temperatures ◽  
Pre Treatment ◽  
Thermal Deterioration ◽  
Thermal Stability Of

Improvement of the thermal stability of continuous SiC fiber reinforced SiC ceramic matrix composites (SiCf/SiC CMC) by the pre-treatment of SiC fillers and the suppression of oxidation during polymer impregnation and pyrolysis (PIP) process were investigated. Dense SiCf/SiC CMCs were fabricated using the slurry infiltration and PIP process under a purified argon atmosphere. Structure and mechanical properties of the SiCf/SiC CMC heated at different temperatures were evaluated. The flexural strength of the SiCf/SiC CMC decreased only 15.3%after heating at 1400 ?C, which exhibited a clear improvement compared with the literature data (49.5% loss), where severe thermal deterioration of SiCf/SiC composite occurred at high temperatures by the crystallization and decomposition of the precursor-derived ceramic matrix. The thermal stability of the SiCf/SiC CMC fabricated by PIP process was improved by the pre-treatment of SiC fillers for removing oxides and the strict atmosphere control to prevent oxidation.

scholarly journals Exposure of Ceramics and Ceramic Matrix Composites in Simulated and Actual Combustor Environments

2000 ◽  
Vol 122 (2) ◽  
pp. 212-218 ◽  
Author(s):  
Karren L. More ◽  
Peter F. Tortorelli ◽  
Mattison K. Ferber ◽  
Larry R. Walker ◽  
James R. Keiser ◽  
...  
Keyword(s):  
Ceramic Matrix Composite ◽  
Ceramic Matrix Composites ◽  
Ceramic Matrix ◽  
Surface Damage ◽  
Operating Conditions ◽  
Matrix Composites ◽  
Long Term Stability ◽  
Recession Rates ◽  
Combustor Liner

A high-temperature, high-pressure, tube furnace has been used to evaluate the long term stability of different monolithic ceramic and ceramic matrix composite materials in a simulated combustor environment. All of the tests have been run at 150 psia, 1204°C, and 15 percent steam in incremental 500 h runs. The major advantage of this system is the high sample throughput; >20 samples can be exposed in each tube at the same time under similar exposure conditions. Microstructural evaluations of the samples were conducted after each 500 h exposure to characterize the extent of surface damage, to calculate surface recession rates, and to determine degradation mechanisms for the different materials. The validity of this exposure rig for simulating real combustor environments was established by comparing materials exposed in the test rig and combustor liner materials exposed for similar times in an actual gas turbine combustor under commercial operating conditions. [S0742-4795(00)02402-9]

Sign in / Sign up

Export Citation Format

Share Document