scholarly journals Fan Flow Field in an Installed Variable Pitch Fan Operating in Reverse Thrust for a Range of Aircraft Landing Speeds

2019 ◽  
Vol 141 (10) ◽  
Author(s):  
David John Rajendran ◽  
Vassilios Pachidis
Keyword(s):  
Flow Field ◽  
Ground Plane ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Variable Pitch ◽  
Stream Flows ◽  
Engine Model ◽  
Aircraft Landing ◽  
Actual Flow ◽  
Reverse Thrust

Abstract The installed flow field for a variable pitch fan (VPF) operating in reverse thrust for the complete aircraft landing run is described in this paper. To do this, a VPF design to generate reverse thrust by reversing airflow direction is developed for a representative 40,000 lbf modern high bypass ratio engine. Thereafter, to represent the actual flow conditions that the VPF would face, an engine model that includes the nacelle, core inlet splitter, outlet guide vanes, bypass nozzle, core exhaust duct, aft-body plug, and core nozzle is designed. The engine model with the VPF is attached to a representative airframe in landing configuration to include the effects of installation. A rolling ground plane that mimics the runway during the landing run is also included to complete the model definition. Three-dimensional (3D) Reynolds-averaged Navier–Stokes (RANS) solutions are carried out for two different VPF stagger angle settings and rotational speeds to obtain the fan flow field. The dynamic installed VPF flow field is characterized by the interaction of the freestream and the reverse stream flows. The two streams meet in a shear layer in the fan passages and get deflected radially outward before turning back onto themselves. The flow field changes with stagger setting, fan rotational speed, and the aircraft landing speed because of the consequent changes in the momentum of the two streams. The description of the installed VPF flow field as generated in this study is necessary to (a) qualify VPF designs that are typically designed by considering only the uninstalled static flow field and (b) choose the VPF operating setting for different stages of the aircraft landing run.

scholarly journals Fan Flow Field in an Installed Variable Pitch Fan Operating in Reverse Thrust for a Range of Aircraft Landing Speeds

2019 ◽  
Author(s):  
David John Rajendran ◽  
Vassilios Pachidis
Keyword(s):  
Flow Field ◽  
Ground Plane ◽  
Variable Pitch ◽  
Stream Flows ◽  
Engine Model ◽  
Aircraft Landing ◽  
Exhaust Duct ◽  
Actual Flow ◽  
Reverse Thrust ◽  
Stagger Angle

Abstract The installed flow field for a Variable Pitch Fan (VPF) operating in reverse thrust for the complete aircraft landing run is described in this paper. To do this, a VPF design to generate reverse thrust by reversing airflow direction is developed for a representative 40000 lbf modern high bypass ratio engine. Thereafter, to represent the actual flow conditions that the VPF would face, an engine model that includes the nacelle, core inlet splitter, outlet guide vanes, bypass nozzle, core exhaust duct, aft-body plug and core nozzle is designed. The engine model with the VPF is attached to a representative airframe in landing configuration to include the effects of installation. A rolling ground plane that mimics the runway during the landing run is also included to complete the model definition. 3D RANS solutions are carried out for two different VPF stagger angle settings and rotational speeds to obtain the fan flow field. The dynamic installed VPF flow field is characterized by the interaction of the free stream and the reverse stream flows. The two streams meet in a shear layer in the fan passages and get deflected radially outwards before turning back onto themselves. The flow field changes with stagger setting, fan rotational speed and the aircraft landing speed because of the consequent changes in the momentum of the two streams. The description of the installed VPF flow field as generated in this study is necessary to: a) qualify VPF designs that are typically designed by considering only the uninstalled static flow field b) choose the VPF operating setting for different stages of the aircraft landing run.

On the Use of an Inflatable Rubber Lip to Improve the Reverse Thrust Flow Field in a Variable Pitch Fan

2021 ◽  
Author(s):  
David John Rajendran ◽  
Vassilios Pachidis
Keyword(s):  
Flow Field ◽  
Reverse Flow ◽  
Separated Flow ◽  
Geometric Feature ◽  
Engine Operation ◽  
Design Modification ◽  
Variable Pitch ◽  
Aircraft Landing ◽  
Turn Radius ◽  
Reverse Thrust

Abstract The installed Variable Pitch Fan (VPF) reverse thrust flow field is obtained from the flow solution of an integrated airframe-engine-VPF research model for the complete reverser engagement regime during the aircraft landing run. The reverse thrust flow field indicates that the reverse flow out of the nacelle inlet is washed downstream by the freestream. Consequently, reverse flow enters the engine through the bypass nozzle from a 180° turn of the washed-down stream. This results in a region of separated flow at the nozzle lip that acts as a blockage to the reverse flow entry into the engine. To mitigate the blockage issue, a smooth guidance of the reverse flow into the engine can be achieved by using an inflatable rubber lip that would define a bell-mouth like geometric feature with a round radius at the nacelle exit. In nominal engine operation, the rubber lip would be stowed flush within the contours of the nacelle surface. The design space of the rubber lip is studied by considering different rounding radii and locations of the turn radius with respect to the nacelle trailing edge. It is observed that a rounding radius of 0.1x nacelle length is sufficient to reduce the blockage and increase the ingested reverse flow by 47% to 18% in the 140 to 40 knots landing speed range. The inflatable rubber lip represents a design modification that can improve VPF reverse thrust operation, in cases where an augmentation of reverse thrust capability is desired

scholarly journals Flow Distortion Into the Core Engine for an Installed Variable Pitch Fan in Reverse Thrust Mode

2020 ◽  
Author(s):  
David John Rajendran ◽  
Vassilios Pachidis
Keyword(s):  
Flow Field ◽  
Total Pressure ◽  
Reverse Flow ◽  
Ground Plane ◽  
Operating Conditions ◽  
Flow Distortion ◽  
Engine Operation ◽  
Variable Pitch ◽  
The Core ◽  
Reverse Thrust

Abstract The flow distortion at core engine entry for a Variable Pitch Fan (VPF) in reverse thrust mode is described from a realistic flow field obtained using an integrated airframe-engine model. The model includes the VPF, core entry splitter, complete bypass nozzle flow path wrapped in a nacelle and installed to an airframe in landing configuration through a pylon. A moving ground plane to mimic the rolling runway is included. 3D RANS solutions are generated at two combinations of VPF stagger angle and rotational speed settings for the entire aircraft landing run from 140 to 20 knots. The internal reverse thrust flow field is characterized by bypass nozzle lip separation, pylon wake and recirculation of flow turned back from the VPF. A portion of the reverse stream flow turns 180° with separation at the splitter leading edge to feed the core engine. The core engine feed flow exhibits circumferential and radial non-uniformities that depend on the reverse flow development at different landing speeds. The temporal dependence of the distorted flow features is also explored by an URANS analysis. Total pressure and swirl angle distortion descriptors, as defined by the Society of Automotive Engineers (SAE) S-16 committee, and, total pressure loss into the core engine are described for the core feed flow at different operating conditions and landing speeds. It is observed that the radial intensity of total pressure distortion is critical to core engine operation, while the circumferential intensity is within acceptable limits. Therefore, the baseline sharp splitter edge is replaced by two larger rounded splitter edges of radii, ∼0.1x and ∼0.2x times the core duct height. This was found to reduce the radial intensity of total pressure distortion to acceptable levels. The description of the installed core feed flow distortion, as described in this study, is necessary to ascertain stable core engine operation, which powers the VPF in reverse thrust mode.

Flow Field Unsteadiness in the Tip Region of a Transonic Compressor Rotor

1997 ◽  
Vol 119 (1) ◽  
pp. 122-128 ◽  
Author(s):  
S. L. Puterbaugh ◽  
W. W. Copenhaver
Keyword(s):  
Flow Field ◽  
High Performance ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Vortex Interaction ◽  
Tip Leakage Vortex ◽  
Tip Leakage ◽  
Transonic Compressor ◽  
Compressor Rotor ◽  
Operating Points

An experimental investigation concerning tip flow field unsteadiness was performed for a high-performance, state-of-the-art transonic compressor rotor. Casing-mounted high frequency response pressure transducers were used to indicate both the ensemble averaged and time varying flow structure present in the tip region of the rotor at four different operating points at design speed. The ensemble averaged information revealed the shock structure as it evolved from a dual shock system at open throttle to an attached shock at peak efficiency to a detached orientation at near stall. Steady three-dimensional Navier Stokes analysis reveals the dominant flow structures in the tip region in support of the ensemble averaged measurements. A tip leakage vortex is evident at all operating points as regions of low static pressure and appears in the same location as the vortex found in the numerical solution. An unsteadiness parameter was calculated to quantify the unsteadiness in the tip cascade plane. In general, regions of peak unsteadiness appear near shocks and in the area interpreted as the shock-tip leakage vortex interaction. Local peaks of unsteadiness appear in mid-passage downstream of the shock-vortex interaction. Flow field features not evident in the ensemble averaged data are examined via a Navier-Stokes solution obtained at the near stall operating point.

Aerothermal Investigation of a Rib-Roughened Trailing Edge Channel With Crossing-Jets—Part I: Flow Field Analysis

2009 ◽  
Vol 132 (1) ◽  
Author(s):  
Alessandro Armellini ◽  
Filippo Coletti ◽  
Tony Arts ◽  
Christophe Scholtes
Keyword(s):  
Flow Field ◽  
Three Dimensional ◽  
Side Wall ◽  
Field Analysis ◽  
Navier Stokes ◽  
Trailing Edge ◽  
Present Contribution ◽  
Cross Sectional ◽  
Numerical Predictions ◽  
Rib Roughened

The present contribution addresses the aerothermal, experimental, and computational studies of a trapezoidal cross-sectional model simulating a trailing edge cooling cavity with one rib-roughened wall. The flow is fed through tilted slots on one side wall and exits through straight slots on the opposite side wall. The flow field aerodynamics is investigated in Part I of the paper. The reference Reynolds number is defined at the entrance of the test section and set at 67,500 for all the experiments. A qualitative flow model is deduced from surface-streamline flow visualizations. Two-dimensional particle image velocimetry measurements are performed in several planes around midspan of the channel and recombined to visualize and quantify three-dimensional flow features. The crossing-jets issued from the tilted slots are characterized and the jet-rib interaction is analyzed. Attention is drawn to the motion of the flow deflected by the rib-roughened wall and impinging on the opposite smooth wall. The experimental results are compared with the numerical predictions obtained from the finite volume Reynolds-averaged Navier–Stokes solver, CEDRE.

scholarly journals Influence of Dimple Height on Turbulent Heat Transfer of Fin Array with Alternate Convex/Concave Dimples

Inventions ◽  
2020 ◽  
Vol 5 (3) ◽  
pp. 33
Author(s):  
Horng-Wen Wu ◽  
Tang-Hong Chen ◽  
Nugroho-Putra Kelana ◽  
De-An Huang
Keyword(s):  
Flow Field ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Turbulent Heat Transfer ◽  
Navier Stokes ◽  
Bottom Surface ◽  
Turbulent Heat ◽  
Algebraic Equations ◽  
Eddy Simulation ◽  
Turbulent Modeling

This study analyzes transient turbulent modeling of three-dimensional multiple dimpled fin array using large eddy simulation (LES). The Navier–Stokes equations as well as the energy equation were constructed by the finite volume method and then discretized to form algebraic equations, which were solved by semi-implicit method for pressure-linked equation (SIMPLE). The solutions of temperature and velocity were obtained by iterating computation until it converged within each step. This simulation places nine fins on the bottom surface of a channel and changes the height of the dimple (0.4, 0.8, and 1.2 mm) with three different levels of Reynolds number (Re) (3500, 5000, and 6500) to investigate the temperature and flow field without gravity in forced convection. The results indicate that the dimpled fin array can generate vortices between the convex/concave dimples and the fin base and increase the influences of the height of the dimple on the flow field around the fin array. The averaged time-mean of the Nusselt number (Nu) for the dimple height of 0.8 mm is higher than that of the no-dimple case up to 14.4%, while the averaged time-mean Nu for the dimple height of 1.2 mm is lower than that of the no-dimple case up to 11.6%.

scholarly journals Numerical and Experimental Study of Flow Field between the Main Hull and Demi-Hull of a Trimaran

2020 ◽  
Vol 8 (12) ◽  
pp. 975
Author(s):  
Cong Sun ◽  
Chunyu Guo ◽  
Chao Wang ◽  
Lianzhou Wang ◽  
Jianfeng Lin
Keyword(s):  
Flow Field ◽  
High Speed ◽  
Light Transmission ◽  
Transmission Rate ◽  
Laser Sheet ◽  
Three Dimensional ◽  
Wake Flow ◽  
Navier Stokes ◽  
Unsteady Wake ◽  
Real Flow

The interactions between the main hull and demi-hull of trimarans have been arousing increasing attention, and detailed circumferential flow fields greatly influence trimaran research. In this research, the unsteady wake flow field of a trimaran was obtained by Reynolds-Averaged Navier-Stokes (RANS) equations on the basis of the viscous flow principles with consideration of the heaving and pitching of the trimaran. Then, we designed an experimental method based on particle-image velocimetry (PIV) and obtained a detailed flow field between the main hull and demi-hull of the trimaran. A trimaran model with one demi-hull made of polycarbonate material with 90% light transmission rate and a refractive index 1.58 (close to that of water 1.33) was manufactured as the experiment sample. Using polycarbonate material, the laser-sheet light-source transmission and high-speed camera recording problems were effectively rectified. Moreover, a nonstandard calibration was added into the PIV flow field measurement system. Then, we established an inverse three-dimensional (3D) distortion coordinate system and obtained the corresponding coordinates by using optics calculations. Further, the PIV system spatial mapping was corrected, and the real flow field was obtained. The simulation results were highly consistent with the experimental data, which showed the methods established in this study provided a strong reference for obtaining the detailed flow field information between the main hull and demi-hull of trimarans.

scholarly journals Numerical Study of the Internal Flow Field of a Centrifugal Impeller

1994 ◽  
Author(s):  
Mou-jin Zhang ◽  
Chuan-gang Gu ◽  
Yong-miao Miao
Keyword(s):  
Flow Field ◽  
Stokes Equations ◽  
Numerical Study ◽  
Three Dimensional ◽  
Simple Algorithm ◽  
Internal Flow ◽  
Staggered Grid ◽  
Navier Stokes ◽  
Centrifugal Impeller ◽  
High Reynolds

The complex three-dimensional flow field in a centrifugal impeller with low speed is studied in this paper. Coupled with high–Reynolds–number k–ε turbulence model, the fully three–dimensional Reynolds averaged Navier–Stokes equations are solved. The Semi–Implicit Method for Pressure–Linked Equations (SIMPLE) algorithm is used. And the non–staggered grid arrangement is also used. The computed results are compared with the available experimental data. The comparison shows good agreement.

Navier-Stokes Computation on a Pivoting Doors Thrust Reverser and Comparison With Tests

1992 ◽  
Author(s):  
L. Schreiber ◽  
M. Legras
Keyword(s):  
Flow Field ◽  
Complex Geometry ◽  
Numerical Data ◽  
Navier Stokes ◽  
Complex Flow ◽  
Static Test ◽  
Development Delay ◽  
Cfd Method ◽  
Thrust Reverser ◽  
Reverse Thrust

An engine thrust reverser must meet different aerodynamic requirements to take into account the engine and airplane integration. These requirements are: - Control of the exit area in order to assess a convenient engine compatibility during the reverser operation. - Generation of reverse thrust meeting the level specified by the airframe in order to slowdown the airplane. - Mimization of the reversed flow field interaction with the airplane structure such as wing and shutters. - Avoid the flow reingestion by the engine fan. In order to reduce the tests number, to decrease the development delay and to improve aerodynamic performance, SNECMA group (SNECMA and HISPANO-SUIZA) has decided to develop a CFD method adapted to pivoting doors thrust reverser aerodynamic calculation. This method uses a Navier-Stokes 3D solver (PHOENICS code) well adapted to complex geometry and complex flow field. The mesh is generated with an analytical method and only one domain is used. The computation has been completed assuming laminar viscosity. The numerical data got with this method have been compared to static test realized on a model similar to actual CFM56-5C four doors reverser. The comparison parameters are the static pressure on the doors, the flow rate and the axial reverse thrust.

Unsteady Interaction of Labyrinth Seal Leakage Flow and Downstream Stator Flow in a Shrouded 1.5 Stage Axial Turbine

2005 ◽  
Author(s):  
P. Peters ◽  
J. R. Menter ◽  
H. Pfost ◽  
A. Giboni ◽  
K. Wolter
Keyword(s):  
Flow Field ◽  
Three Dimensional ◽  
Numerical Data ◽  
Labyrinth Seal ◽  
Rotor Blades ◽  
Navier Stokes ◽  
Experimental Program ◽  
Leakage Flow ◽  
Axial Turbine ◽  
Flow Phenomena

This paper presents the results of experimental and numerical investigations into the flow in a 1.5-stage low-speed axial turbine with shrouded rotor blades and a straight through labyrinth seal. The paper focuses on the time dependent influence of the leakage flow on the downstream stator flow field. The experimental program consists of time accurate measurements of the three-dimensional properties of the flow through ten different measurement planes in the stator passage. The measurements were carried out using pneumatic five-hole probes and three dimensional hot-wire probes at the design operating point of the turbine. The measurement planes extend from the shroud to the casing. The complex three-dimensional flow field is mapped in great detail by 4,800 measurement points and 20 time steps per blade passing period. The time-accurate experimental data of the ten measurement planes was compared with the results of unsteady, numerical simulations of the turbine flow. The 3D-Navier-Stokes Solver CFX-TASCflow was used. The experimental and numerical results correspond well and allow detailed analysis of the flow phenomena. Additionally numerical data behind the rotor is used to connect the entry of the leakage flow with the flow phenomena in the downstream stator passage and behind it. The leakage flow causes strong fluctuations of the flow in the downstream stator. Above all, the high number of measurement points reveals both the secondary flow phenomena and the vortex structures within the blade passage. The time-dependence of both the position and the intensity of the vortices influenced by the leakage flow is shown. The paper shows that even at realistic clearance heights the leakage flow influences considerable parts of the downstream stator and gives rise to negative incidence and flow separation. Thus, labyrinth seal leakage flow should be taken properly into account in the design or optimization process of turbines.

Sign in / Sign up

Export Citation Format

Share Document