Design and Evaluation of a Dexterous and Modular Hand-Held Surgical Robot for Minimally Invasive Surgery

2019 ◽  
Vol 13 (4) ◽  
Author(s):  
Yingkan Yang ◽  
Kang Kong ◽  
Jianmin Li ◽  
Shuxin Wang ◽  
Jinhua Li
Keyword(s):  
Minimally Invasive Surgery ◽  
Minimally Invasive ◽  
Invasive Surgery ◽  
Degrees Of Freedom ◽  
Surgical Robot ◽  
Surgical Instruments ◽  
Surgical Performance ◽  
Conventional Instrument ◽  
End Effectors ◽  
Intuitive Interface

Abstract Current surgical instruments with fewer degrees-of-freedom (DOF) for minimally invasive surgery (MIS) have limited capability to perform complicated and precise procedures, such as suturing and knot-tying. To address such a problem, a modular dexterous hand-held surgical robot with an ergonomic handle and 4DOF interchangeable instruments was developed. The kinematic arrangement of the instrument and that of the handle were designed to be the same. A compact roll-yaw-roll transmission was proposed applying cable-driven mechanism. Performance experiments were carried out to evaluate the effectiveness of the overall system. The measured grip forces of the robot ranged from 8.63 N to 19.18 N. The suturing performance score of the robot was significantly higher than that of the conventional instrument (28.8 ± 5.02 versus 17.2 ± 7.43, p = 0.041). The trajectory tracking test and animal experiment verified the accuracy and feasibility of the robot. The proposed robot could improve the surgical performance of MIS, providing various end-effectors and having an intuitive interface in the meantime.

Kinematics of a Fully-Decoupled Remote Center-of-Motion Parallel Manipulator for Minimally Invasive Surgery

2012 ◽  
Vol 6 (2) ◽  
Author(s):  
Chin-Hsing Kuo ◽  
Jian S. Dai
Keyword(s):  
Minimally Invasive Surgery ◽  
Minimally Invasive ◽  
Invasive Surgery ◽  
Inverse Kinematics ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Surgical Instruments ◽  
End Effector ◽  
Minimally Invasive Surgical ◽  
Inverse Kinematics Problem

A crucial design challenge in minimally invasive surgical (MIS) robots is the provision of a fully decoupled four degrees-of-freedom (4-DOF) remote center-of-motion (RCM) for surgical instruments. In this paper, we present a new parallel manipulator that can generate a 4-DOF RCM over its end-effector and these four DOFs are fully decoupled, i.e., each of them can be independently controlled by one corresponding actuated joint. First, we revisit the remote center-of-motion for MIS robots and introduce a projective displacement representation for coping with this special kinematics. Next, we present the proposed new parallel manipulator structure and study its geometry and motion decouplebility. Accordingly, we solve the inverse kinematics problem by taking the advantage of motion decouplebility. Then, via the screw system approach, we carry out the Jacobian analysis for the manipulator, by which the singular configurations are identified. Finally, we analyze the reachable and collision-free workspaces of the proposed manipulator and conclude the feasibility of this manipulator for the application in minimally invasive surgery.

scholarly journals Design and control of a 3-DOF hydraulic driven surgical instrument

2015 ◽  
Vol 1 (1) ◽  
pp. 140-144 ◽  
Author(s):  
Timo Cuntz ◽  
Laura Comella
Keyword(s):  
Minimally Invasive Surgery ◽  
Minimally Invasive ◽  
Invasive Surgery ◽  
Degrees Of Freedom ◽  
Power Transmission ◽  
Kinematic Model ◽  
Inverse Kinematic ◽  
Surgical Instruments ◽  
Laparoscopic Instrument ◽  
Technical Problems

AbstractAlthough the use of minimally invasive surgery techniques has steadily increased, the development of new tools for these procedures has stagnated. Indeed a new generation of surgical instruments, with tips that have multiple degrees of freedom, has been developed. However, they are facing so many technical problems that none have been able to establish themselves in the medical market. To overcome the problems these instruments are facing, a micro hydraulic power transmission system has been developed and been presented in [1]. With these driving units it was possible to design an instrument for minimally invasive surgery with a tip which is movable in 3 degrees of freedom (DOF) and that is light in weight, small in size and powerful in movements and gripping. This paper presents the mechanical setup (including dimensions and materials), describes the theoretical basis for the control with the inverse kinematic model, discusses the external drives setup and gives first performance data of this novel hydraulically actuated laparoscopic instrument with 3 degrees of freedom.

scholarly journals A Hybrid Electromagnetic and Tendon-Driven Actuator for Minimally Invasive Surgery

Actuators ◽  
2020 ◽  
Vol 9 (3) ◽  
pp. 92 ◽  
Author(s):  
HaoChen Wang ◽  
SaiHui Cui ◽  
Yao Wang ◽  
ChengLi Song
Keyword(s):  
Minimally Invasive Surgery ◽  
Minimally Invasive ◽  
Invasive Surgery ◽  
Degrees Of Freedom ◽  
Surgical Instruments ◽  
Surgical Instrument ◽  
Kinematics Analysis ◽  
The Finite Element Method ◽  
Natural Orifice ◽  
Electromagnetic Structure

Minimally invasive surgery (MIS) is a surgical technique that facilitates access to the internal tissues and organs of a patient’s body via a limited number of small incisions or natural orifice of the patients. Such a technique requires specialized slender surgical instruments with a high levels of dexterity and functionality. However, the currently available MIS instruments are rigid and could offer only limited degrees of freedom (DOFs) that hampers the surgeon’s effort to perform the required operation accurately. In this study, we have developed a hybrid electromagnetic and tendon-driven actuator as an integral part of MIS surgical instruments to provide them with optimum angulation. The design uses a novel electromagnetic structure to lock the position of individual joints, and a tendon-driven structure for the articulation of the surgical instrument. The finite element method (FEM) was utilized to predict the performance of the actuator, which was experimentally validated. Subsequently, a prototype was assembled, and corresponding kinematics analysis was presented to visualize the improvement of the developed mechanism on the functional workspace of the MIS instruments. It was concluded that the developed mechanism could offer three additional DOFs for the surgical instrument and angulation of 180° for each articulated joint.

Multimodal data fusion framework enhanced robot-assisted minimally invasive surgery

2021 ◽  
pp. 014233122098435
Author(s):  
Wen Qi ◽  
Hang Su ◽  
Ke Fan ◽  
Ziyang Chen ◽  
Jiehao Li ◽  
...  
Keyword(s):  
Minimally Invasive Surgery ◽  
Minimally Invasive ◽  
Data Fusion ◽  
Invasive Surgery ◽  
Robot Control ◽  
Surgical Robot ◽  
Robot Assisted ◽  
Multimodal Data ◽  
Multimodal Data Fusion ◽  
Fusion Framework

The generous application of robot-assisted minimally invasive surgery (RAMIS) promotes human-machine interaction (HMI). Identifying various behaviors of doctors can enhance the RAMIS procedure for the redundant robot. It bridges intelligent robot control and activity recognition strategies in the operating room, including hand gestures and human activities. In this paper, to enhance identification in a dynamic situation, we propose a multimodal data fusion framework to provide multiple information for accuracy enhancement. Firstly, a multi-sensors based hardware structure is designed to capture varied data from various devices, including depth camera and smartphone. Furthermore, in different surgical tasks, the robot control mechanism can shift automatically. The experimental results evaluate the efficiency of developing the multimodal framework for RAMIS by comparing it with a single sensor system. Implementing the KUKA LWR4+ in a surgical robot environment indicates that the surgical robot systems can work with medical staff in the future.

Mechanical Manipulator for Intuitive Control of Endoscopic Instruments With Seven Degrees of Freedom

2004 ◽  
Author(s):  
J. E. N. Jaspers ◽  
M. Shehata ◽  
F. Wijkhuizen ◽  
J. L. Herder ◽  
C. A. Grimbergen
Keyword(s):  
Minimally Invasive Surgery ◽  
Minimally Invasive ◽  
Invasive Surgery ◽  
Degrees Of Freedom ◽  
Force Feedback ◽  
Robotic Systems ◽  
Complex Tasks ◽  
Steel Wires

Performing complex tasks in Minimally Invasive Surgery (MIS) is demanding due to a disturbed hand-eye co-ordination, the use of non-ergonomic instruments with limited degrees of freedom (DOFs) and a lack of force feedback. Robotic telemanipulatory systems enhance surgical dexterity by providing up to 7 DOFs. They allow the surgeon to operate in an ergonomically favorable position with more intuitive manipulation of the instruments. Commercially available robotic systems, however, are very bulky, expensive and do not provide any force feedback. The aim of our study was to develop a simple mechanical manipulator for MIS. When manipulating the handle of the device, the surgeon’s wrist and grasping movements are directly transmitted to the deflectable instrument tip in 7 DOFs. The manipulator consists of a parallelogram mechanism with steel wires. First phantom experience indicated that the system functions properly. The MIM provides some force feedback improving safety. A set of MIMs seems to be an economical and compact alternative for robotic systems.

Minimally Invasive Surgery: Equipment and Troubleshooting

2019 ◽  
Author(s):  
Jacob A. Greenberg ◽  
Laura E. Fischer
Keyword(s):  
Minimally Invasive Surgery ◽  
Minimally Invasive ◽  
Invasive Surgery ◽  
Surgical Instruments ◽  
Single Site ◽  
Processing Unit ◽  
Solid Organ ◽  
Video Monitor ◽  
Energy Devices ◽  
Basic Set

The field of minimally invasive surgery has evolved rapidly since the first laparoscopic appendectomies and cholecystectomies were performed nearly 30 years ago.1 Minimally invasive approaches are now widely used for gastrointestinal resection, hernia repair, antireflux surgery, bariatric surgery, and solid-organ surgery, such as hepatic, pancreatic, adrenal, and renal resections. Although the techniques and equipment needed to access, expose, and dissect vary according to the type of operation and surgeon’s preference, a basic set of equipment is essential for any laparoscopic or robotic procedure: endoscope, camera, light source, signal processing unit, video monitor, insufflator and gas supply, trocars, and surgical instruments. Understanding how to use and troubleshoot this equipment is critical for any surgeon who performs minimally invasive surgery. We review the essentials of basic laparoscopic equipment, including the mechanics of normally functioning equipment and the various types of laparoscopic trocars and instruments. We also discuss robotic equipment and the fundamental differences from laparoscopy. Minilaparoscopy and single-site equipment are briefly explained. Additionally, we discuss potential technical difficulties that surgeons may encounter while performing minimally invasive procedures and provide suggestions for troubleshooting these problems. This review 13 figure, 2 tables, and 64 references.Key Words: Laparoscopy, Robotic Surgery, Minimally Invasive Surgery, Laparoscopic Surgery, Trocars, Surgical Energy Devices, Insufflator, Laparoscopic Instrumentation, Ergonomics, Single Site Surgery

Robotic colorectal surgery: Where are we right now?

2010 ◽  
Vol 224 (7) ◽  
pp. 1415-1419 ◽  
Author(s):  
J Kang ◽  
K Y Lee
Keyword(s):  
Minimally Invasive Surgery ◽  
Robotic Surgery ◽  
Colorectal Surgery ◽  
Minimally Invasive ◽  
Invasive Surgery ◽  
Degrees Of Freedom ◽  
Three Dimensional ◽  
Colorectal Disease ◽  
Widespread Application ◽  
Robotic Colorectal Surgery

Minimally invasive surgery has become mainstream in surgical management of colorectal disease. Based on evidence of oncologic safety and benefit to patients, laparoscopic colorectal surgery is regarded as a successful alternative to open surgery. Since the introduction of the da Vinci® system as another tool for minimally invasive surgery, there have been several reports regarding the feasibility and safety of the system. The authors looked at their experience with 412 robotic colorectal surgeries and found that it was feasible and safe. Incidence of operation-related morbidity was around 11 per cent and system-related problems were 2.4 per cent. There was no operation-related or system-related mortality. From a technological perspective, robotic surgery has several advantages over laparoscopic surgery, including a magnifying view with a three-dimensional image, a stable camera platform, and instruments with Endowrist® technology that allow for seven degrees of freedom of movement. However, there is still room for improvement. The revolution of robotic technology can aid in the realization of a dream: a smaller, cheaper, and more sophisticated robotic system, which will further facilitate the widespread application of robotic surgery to colorectal disease.

Sign in / Sign up

Export Citation Format

Share Document