Singularity Analysis on a Special Class of Cable-Suspended Parallel Mechanisms With Pairwise Cable Arrangement and Actuation Redundancy

2019 ◽  
Vol 142 (2) ◽  
Author(s):  
Lewei Tang ◽  
Pengshuai Shi ◽  
Li Wu ◽  
Xiaoyu Wu ◽  
Xiaoqiang Tang
Keyword(s):  
Special Class ◽  
Degrees Of Freedom ◽  
Full Rank ◽  
Singularity Analysis ◽  
Parallel Mechanisms ◽  
End Effector ◽  
Actuation Redundancy ◽  
Translational Movement ◽  
The Matrix ◽  
Redundant Actuators

Abstract This paper presents a singularity study on a special class of spatial cable-suspended parallel mechanisms (CSPMs) with merely three translational degrees of freedom using redundant actuators. This paper focuses on the CSPMs that have the capability to perform the purely translational movement with pairwise cables as parallelograms. There are two types of singularity to be discussed, which result from dynamic equations of CSPMs and the parallelogram constraint of pairwise cables. To ensure three-translational dofs without rotation of the end-effector, the matrix formed by normals of the planes based on each pairwise cables should maintain in full rank. In the case study, four typical designs of CSPMs with a planar end-effector and a spatial end-effector are discussed to clarify and conclude the singularity features of CSPMs with actuation redundancy. The results show that for some architectures there exist both types of singularity for redundantly actuated CSPMs with pairwise cables but for some other architectures the redundant actuation exerts no effect on the singularity issue.

Position-singularity analysis of a special class of the Stewart parallel mechanisms with two dissimilar semi-symmetrical hexagons

Robotica ◽  
2012 ◽  
Vol 31 (1) ◽  
pp. 123-136 ◽  
Author(s):  
Baokun Li ◽  
Yi Cao ◽  
Qiuju Zhang ◽  
Zhen Huang
Keyword(s):  
Special Class ◽  
Screw Theory ◽  
Singularity Analysis ◽  
Parallel Mechanisms ◽  
Geometric Characteristics ◽  
Characteristic Plane ◽  
The Matrix ◽  
Grassmann Line Geometry ◽  
Moving Platform ◽  
Singularity Locus

SUMMARYIn this paper, for a special class of the Stewart parallel mechanism, whose moving platform and base one are two dissimilar semi-symmetrical hexagons, the position-singularity of the mechanism for a constant-orientation is analyzed systematically. The force Jacobian matrix [J]T is constructed based on the principle of static equilibrium and the screw theory. After expanding the determinant of the simplified matrix [D], whose rank is the same as the rank of the matrix [J]T, a cubic symbolic expression that represents the 3D position-singularity locus of the mechanism for a constant-orientation is derived and graphically represented. Further research shows that the 3D position-singularity surface is extremely complicated, and the geometric characteristics of the position-singularity locus lying in a general oblique plane are very difficult to be identified. However, the position-singularity locus lying in the series of characteristic planes, where the moving platform coincides, are all quadratic curves compromised of infinite many sets of hyperbolas, four pairs of intersecting lines and a parabola. For some special orientations, the quadratic curve can degenerate into two lines or even one line, all of which are parallel to the ridgeline. Two theorems are presented and proved for the first time when the geometric characteristics of the position-singularity curves in the characteristic plane are analyzed. Moreover, the kinematic property of the position-singularity curves is obtained using the Grassmann line geometry and the screw theory. The theoretical results are demonstrated with several numeric examples.

Instantaneous Kinemato-Static Model of Planar Compliant Parallel Mechanisms

2008 ◽  
Author(s):  
Cyril Quennouelle ◽  
Cle´ment Gosselin
Keyword(s):  
Degrees Of Freedom ◽  
Applied Load ◽  
Jacobian Matrix ◽  
Compliant Mechanism ◽  
Static Model ◽  
Parallel Mechanisms ◽  
End Effector ◽  
Kinematic Constraints ◽  
The Matrix ◽  
External Loads

In this paper, the number of degrees of freedom, the kinematic constraints, the pose of the end-effector and the static constraints that lead to the Kinemato-Static Model of a Compliant Mechanism are introduced. A formulation is then provided for the Instantaneous Kinemato-Static Model. This new model enables to calculate the variation of the pose as a linear function of the motion of the actuators and the variation of the external loads through two new matrices: the compliant Jacobian matrix and the matrix of compliance that give a simple and meaningful formulation of the model of the mechanism.r Finally, a simple application to a 4-bar mechanism is presented to illustrate the use of this model and the new possibilities that it opens, notably the study of the kinematics for any range of applied load.

scholarly journals Optimum Seeking of Redundant Actuators for M-RCM 3-UPU Parallel Mechanism

2020 ◽  
Author(s):  
Chen Zhao ◽  
Jingke Song ◽  
Xuechan Chen ◽  
Ziming Chen ◽  
Huafeng Ding
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Singularity Analysis ◽  
Universal Joint ◽  
Prismatic Joint ◽  
Transmission Index ◽  
Redundant Actuators ◽  
Force Transmissibility ◽  
Singular Configuration

Abstract This paper focuses on a 2R1T 3-UPU (U for universal joint and P for prismatic joint) parallel mechanism (PM) with two rotational and one translational (2R1T) degrees of freedom (DOFs) and the ability of multiple remote centers of motion (M-RCM). The singularity analysis based on the indexes of motion/force transmissibility and constraint shows that this PM has transmission singularity, constraint singularity, mixed singularity and limb singularity. To solve these singularproblems, the quantifiable redundancy transmission index (RTI) and the redundancy constraint index (RCI) are proposed for optimum seeking of redundant actuators for this PM. Then the appropriate redundant actuators are selected and the working scheme for redundant actuators near the corresponding singular configuration are given to help the PM go through the singularity.

scholarly journals Analytical inverse kinematics for 5-DOF humanoid manipulator under arbitrarily specified unconstrained orientation of end-effector

Robotica ◽  
2014 ◽  
Vol 33 (4) ◽  
pp. 747-767 ◽  
Author(s):  
Masayuki Shimizu
Keyword(s):  
Analytical Method ◽  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Singularity Analysis ◽  
Inverse Kinematic ◽  
Inverse Kinematic Problem ◽  
Target Orientation ◽  
End Effector ◽  
Position And Orientation

SUMMARYThis paper proposes an analytical method of solving the inverse kinematic problem for a humanoid manipulator with five degrees-of-freedom (DOF) under the condition that the target orientation of the manipulator's end-effector is not constrained around an axis fixed with respect to the environment. Since the number of the joints is less than six, the inverse kinematic problem cannot be solved for arbitrarily specified position and orientation of the end-effector. To cope with the problem, a generalized unconstrained orientation is introduced in this paper. In addition, this paper conducts the singularity analysis to identify all singular conditions.

Singularity Analysis of Closed Kinematic Chains

1999 ◽  
Vol 121 (1) ◽  
pp. 32-38 ◽  
Author(s):  
F. C. Park ◽  
J. W. Kim
Keyword(s):  
Configuration Space ◽  
Degrees Of Freedom ◽  
Geometric Analysis ◽  
Singularity Analysis ◽  
Geometric Framework ◽  
End Effector ◽  
Kinematic Chains ◽  
Closed Chain ◽  
High Level ◽  
Kinematic Singularities

This paper presents a coordinate-invariant differential geometric analysis of kinematic singularities for closed kinematic chains containing both active and passive joints. Using the geometric framework developed in Park and Kim (1996) for closed chain manipulability analysis, we classify closed chain singularities into three basic types: (i) those corresponding to singular points of the joint configuration space (configuration space singularities), (ii) those induced by the choice of actuated joints (actuator singularities), and (iii) those configurations in which the end-effector loses one or more degrees of freedom of available motion (end-effector singularities). The proposed geometric classification provides a high-level taxonomy for mechanism singularities that is independent of the choice of local coordinates used to describe the kinematics, and includes mechanisms that have more actuators than kinematic degrees of freedom.

Structure Synthesis of Parallel Manipulators With Fully Decoupled Projective Motion and Any Degrees of Freedom

2020 ◽  
Author(s):  
Chin-Hsing Kuo ◽  
Jian S. Dai
Keyword(s):  
Special Class ◽  
Degrees Of Freedom ◽  
Parallel Manipulators ◽  
End Effector ◽  
Structure Synthesis ◽  
Decoupled Motion ◽  
Synthesis Procedure ◽  
Motion Constraint

Abstract This paper presents the structure synthesis of a special class of parallel manipulators with motion decoupleability. The manipulator is synthesized by grouping a motion constraint leg and a set of constraint-free legs. The desired motion, i.e., the output degrees of freedom (DOFs), of the end-effector is expressed by a projective angle representation. It was found that the fully decoupled design for parallel manipulators with any DOFs is achievable when the output motion is described by the projective angles. A synthesis procedure is proposed based on the reasoning of the screw systems and reciprocal screws of the decoupled motion. Several design examples of fully decoupled 2-, 3-, 4-, 5-, and 6-DOF parallel manipulators are provided.

Kinematics of a Pure Translational UPS/3RPaPaR Parallel Mechanism

2007 ◽  
Author(s):  
Chung-Ching Lee ◽  
Po-Chih Lee
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Translational Motion ◽  
Singularity Analysis ◽  
Inverse Kinematic ◽  
Geometric Constraints ◽  
Design Parameters ◽  
Numerical Illustration ◽  
The Matrix ◽  
Kinematic Analyses

From the viewpoint of kinematics, a type of 3 degrees of freedom (dofs) UPS/3RPaPaR overconstrained parallel mechanism (Pa means the hinged 4R parallelogram) with pure translational motion is presented for the development of automatic assembly devices or as a regional structure in the hybrid parallel platform. In the beginning, the formation & mobility are elucidated and the 4×4 transformation matrix & the D-H notation with specific geometric constraints verify the pure translational motion. The forward and inverse kinematic analyses are then established in the analytical closed-form through the matrix method. Besides, we take a numerical illustration for the confirmation of correctness of the derived equations. The determination of workspace is also attained by the intersection of volumes swept by each limb. In addition, the Jacobian matrix and its condition number indicated by Euclidean norm as a function of design parameters are further achieved. Finally, the singularity analysis of the configuration based on the direct and inverse kinematic J-matrix during the movement is identified in detail.

A Parallelogram-Based Parallel Manipulator for Schönflies Motion

2006 ◽  
Vol 129 (12) ◽  
pp. 1243-1250 ◽  
Author(s):  
Oscar Salgado ◽  
Oscar Altuzarra ◽  
Enrique Amezua ◽  
Alfonso Hernández
Keyword(s):  
Kinematic Analysis ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Kinematic Chain ◽  
Singularity Analysis ◽  
End Effector ◽  
Fixed Direction ◽  
Axis Parallel ◽  
Schönflies Motion ◽  
4 Degrees Of Freedom

A parallelogram-based 4 degrees-of-freedom parallel manipulator is presented in this paper. The manipulator can generate the so-called Schönflies motion that allows the end effector to translate in all directions and rotate around an axis parallel to a fixed direction. The theory of group of displacements is applied in the synthesis of this manipulator, which employs parallelograms in every limb. The planar parallelogram kinematic chain provides a high rotational capability and an improved stiffness to the manipulator. This paper shows the kinematic analysis of the manipulator, including the closed-form resolution of the forward and inverse position problems, the velocity, and the singularity analysis. Finally, a prototype of the manipulator, adding some considerations about its singularity-free design, and some technical applications in which the manipulator can be used are presented.

Structure Synthesis of a Class of Parallel Manipulators with Fully Decoupled Projective Motion

2021 ◽  
pp. 1-17
Author(s):  
Chin-Hsing Kuo ◽  
Jian S. Dai
Keyword(s):  
Special Class ◽  
Degrees Of Freedom ◽  
Systematic Approach ◽  
Parallel Manipulators ◽  
Joint Space ◽  
End Effector ◽  
Geometrical Reasoning ◽  
Structure Synthesis ◽  
Decoupled Motion ◽  
One To One

Abstract This paper describes the structure synthesis of a special class of parallel manipulators with fully decoupled motion, that is, a one-to-one correspondence between the instantaneous motion space of the end-effector and the joint space of the manipulator. A notable finding of this study is that a fully decoupled design can be achieved for parallel manipulators with any number of degrees of freedom (DOFs) when the rotational DOF of the end-effector is expressed in the form of a projective angle representation. On the basis of the geometrical reasoning of the projective motion interpreted by screw algebra, a systematic approach is developed for synthesizing the structures of f-DOF (f ≤ 6) parallel manipulators with fully decoupled projective motion. Several 2-, 3-, 4-, 5-, and 6-DOF parallel manipulators with fully decoupled projective motion were designed for illustrating the developed method.

Mobility and Singularity Analysis of a Class of 2-DOF Rotational Parallel Mechanisms Using a Visual Graphic Approach

2011 ◽  
Author(s):  
J. J. Yu ◽  
X. Dong ◽  
X. Pei ◽  
G. H. Zong ◽  
Xianwen Kong ◽  
...  
Keyword(s):  
System Theory ◽  
Degrees Of Freedom ◽  
Singularity Analysis ◽  
Parallel Mechanisms ◽  
Two Degrees Of Freedom ◽  
Simple Rules ◽  
Study Case ◽  
Formula Derivation ◽  
Visual Graphic

In this paper, a simple and straightforward visual graphic approach for mobility and singularity analysis of mechanisms is introduced. Although the proposed method is established upon the reciprocal screw system theory, it needs no formula derivation instead knowing about a few simple rules. As a study case, mobility and singularity analysis for a class of two degrees-of-freedom (DOF) rotational parallel mechanisms i.e. well-know Omni-Wrist III with four limbs, and its two derived architectures with three limbs (named T-type and δ-type) is analyzed by the proposed method. As a result, a novel PKM derived from Omni-Wrist III is presented, which has the DOF and kinematics property close to Omni Wrist III.

Sign in / Sign up

Export Citation Format

Share Document