scholarly journals Comparative Study of Wall-Shear Stress at the Ascending Aorta for Different Mechanical Heart Valve Prostheses

2019 ◽  
Vol 142 (1) ◽  
Author(s):  
Qianhui Li ◽  
Franziska Hegner ◽  
Christoph H. Bruecker

AbstractAn experimental study is reported which investigates the wall shear stress (WSS) distribution in a transparent model of the human aorta comparing an St. Jude Medical (SJM) Regent bileaflet mechanical heart valve (BMHV) with the Lapeyre-Triflo FURTIVA trileaflet mechanical heart valve (TMHV) in physiological pulsatile flow. Elastic microcantilever structures, calibrated as micropillar WSS sensors by microparticle-image-velocimetry measurements, are applied to the wall along the ascending aorta (AAo). The peak WSS values in the BMHV are observed to be almost twice that of the values seen in the TMHV. Flow field analysis illuminates that these peaks are linked to the jet-like flows generated in the valves interacting with the aortic wall. Not only the magnitude but also the impact regions are specific for different valve designs. The side-orifice jets generated by the BMHV travel along the aortic wall in the AAo, impacting the wall throughout the AAo. However, the jets generated by TMHV impact further downstream in the AAo and results in a reduced WSS.

Prosthesis ◽  
2020 ◽  
Vol 2 (4) ◽  
pp. 297-303
Author(s):  
Giuseppe M. Raffa ◽  
Salvatore Pasta

Although aortic resection and end-to-end anastomosis are applied to repair ascending aortic aneurysm, there is a lack of information on the late risk of post-operative complications, such as aortic dissection and aneurysmal re-dilatation. It is recognized that altered hemodynamic forces exerted on an aortic wall play an important role on dissection and aneurysm formation. We present a case in which the hemodynamic forces were investigated prior and after repair of an ascending aorta treated by resection with end-to-end anastomosis and a bioprosthetic heart valve. Post-operative wall shear stress was redistributed uniformly along the vessel circumference, and this may suggest a reduced risk of complications near aortic root, but not exclude the re-dilatation of the ascending aorta.


CFD letters ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 69-79
Author(s):  
Nursyaira Mohd Salleh ◽  
Mohamad Shukri Zakaria ◽  
Mohd Juzaila Abd Latif ◽  
Adi Azriff Basri

Artificial heart valves for replacing diseased indigenous heart valves were widely used. The treatment of certain types of heart disease requires mechanical valves to be implanted operatively. Healthy cardiac valves are essential to proper cardiac function. The current study presents an investigation of the pulsatile blood flow through a bileaflet mechanical heart valve (BMHV) with a vortex generator (VG) in fully open position. A St. Jude Medical Regent valve with a diameter of 23 mm was used to mount triangular VGs as a means of improving pressure gradients and reducing turbulence. The anatomic aorta and axisymmetric aorta was computed by large eddy simulation (LES) approached. The implications for both models with VGs were observed in terms of velocity magnitude, vortices and wall shear stress. The results suggested that the anatomic aorta is prone to develop more blood clotting at the leading edge of the leaflets with 2.03 m/s. Furthermore, the anatomic aorta produces higher wall shear stress with 69Pa, which possibly contributes to a high risk of thrombosis.


2019 ◽  
Vol 40 (Supplement_1) ◽  
Author(s):  
E M J Hartman ◽  
A M Kok ◽  
A Hoogendoorn ◽  
F J H Gijsen ◽  
A F W Steen ◽  
...  

Abstract Introduction Local wall shear stress (WSS) metrics, high local lipid levels (as detected by near-infrared spectroscopy (NIRS)), as well as systemic lipid levels, have been individually associated with atherosclerotic disease progression. However, a possible synergistic effect remains to be elucidated. This study is the first study to combine WSS metrics with NIRS-detected local lipid content to investigate a potential synergistic effect on plaque progression in human coronary arteries. Methods The IMPACT study is a prospective, single centre study investigating the relation between atherosclerotic plaque progression and WSS in human coronary arteries. Patients with ACS treated with PCI were included. At baseline and after 1-year follow-up, patients underwent near-infrared spectroscopy intravascular ultrasound (NIRS-IVUS) imaging and intravascular doppler flow measurements of at least one non-culprit coronary artery. After one month, a CT angiography was made. CT derived centreline combined with IVUS lumen contours resulted in a 3D reconstruction of the vessel. The following WSS metrics were computed using computational fluid dynamics applying the vessel specific invasive flow measurements: time-average wall shear stress (TAWSS), relative residence time (RRT), cross-flow index, oscillatory shear index and transverse wall shear stress. Low TAWSS is known as pro atherogenic, in contrast to all the other shear stress metrics, at which a high magnitude is pro-atherogenic. The arteries were divided into 1.5mm/45° sectors. Based on NIRS-IVUS, wall thickness change over time was determined and NIRS positive sectors detected. Furthermore, per vessel the shear stress was divided into tertiles (low, intermediate, high). To investigate the synergistic effect of local lipids on shear stress related plaque growth, wall thickness change over time was related to the different shear stress metrics comparing the NIRS-positive with the NIRS-negative sectors. Results 15 non-culprit coronary arteries from the first 14 patients were analyzed (age 62±10 years old and 92.9% male). A total of 2219 sectors were studied (5.2%, N=130, NIRS-positive) for wall thickness changes. After studying all five shear stress metrics, we found for TAWSS and RRT that presence of lipids, as detected by NIRS, amplified the effect of shear stress on plaque progression (see figure). Sectors presenting with lipid-rich plaque, compared to NIRS-negative sectors, showed more progression when they were exposed to low TAWSS (p=0.07) or high RRT (p=0.012) and more regression in sectors exposed to high TAWSS (p=0.10) or low RRT (p=0.06). Delta wall thickness vs shear stress Conclusion We presented the first preliminary results of the IMPACT study, showing the synergistic effect of lipid rich plaque and shear stress on plaque progression. Therefore, intravascular lipid-rich plaque (NIRS) assessment has added value to shear stress profiling for the prediction of plaque growth, leading to improved risk stratification. Acknowledgement/Funding ERC starting grant 310457


2019 ◽  
Vol 125 (Suppl_1) ◽  
Author(s):  
Ashna K Maredia ◽  
Fatima Iqbal ◽  
David G Guzzardi ◽  
Alex J Barker ◽  
Patrick M McCarthy ◽  
...  

Author(s):  
Arun Ramu ◽  
Guo-Xiang Wang

Intracranial aneurysms are abnormal enlargement in the walls of cerebral arteries. The rupture of aneurysms is the leading cause of subarachnoid hemorrhage (SAH), with a high mortality and morbidity rate. A majority of saccular cerebral aneurysms occur at sites of arterial bifurcations. However, a good percentage of aneurysms are curvature induced and are found along the cavernous arterial segment. The occurrence of such non branching aneurysms, clinically called dorsal aneurysms, can be related to the increased wall shear stress at the curved arteries. The rupture of aneurysms usually occurs at the dome region, which is subjected to reduced wall shear stress (wss) owing to low re-circulating flow. Hence it is important to understand the impact of arterial curvature on the WSS distribution along the dome of aneurysms. Previously, studies have not taken into account the aspect of low WSS along the dome region. In the present 3-d computational fluid dynamic approach, we investigate the impact of varying arterial curvature on spherical dorsal aneurysms. The primary velocity patterns, the WSS distribution along the dome of the aneurysm and the area of increased WSS have been quantified for steady flow conditions.


2019 ◽  
Vol 11 (7) ◽  
pp. E96-E97
Author(s):  
Emilie Bollache ◽  
Paul W. M. Fedak ◽  
Michael Markl ◽  
Alex J. Barker

2012 ◽  
Vol 45 (1) ◽  
pp. 156-163 ◽  
Author(s):  
Alexander Assmann ◽  
Ali Cemal Benim ◽  
Fethi Gül ◽  
Philipp Lux ◽  
Payam Akhyari ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document