Robust Kalman-Type Filter for Non-Gaussian Noise: Performance Analysis With Unknown Noise Covariances

Author(s):  
Seyed Fakoorian ◽  
Alireza Mohammadi ◽  
Vahid Azimi ◽  
Dan Simon

The Kalman filter (KF) is optimal with respect to minimum mean square error (MMSE) if the process noise and measurement noise are Gaussian. However, the KF is suboptimal in the presence of non-Gaussian noise. The maximum correntropy criterion Kalman filter (MCC-KF) is a Kalman-type filter that uses the correntropy measure as its optimality criterion instead of MMSE. In this paper, we modify the correntropy gain in the MCC-KF to obtain a new filter that we call the measurement-specific correntropy filter (MSCF). The MSCF uses a matrix gain rather than a scalar gain to provide better selectivity in the way that it handles the innovation vector. We analytically compare the performance of the KF with that of the MSCF when either the measurement or process noise covariance is unknown. For each of these situations, we analyze two mean square errors (MSEs): the filter-calculated MSE (FMSE) and the true MSE (TMSE). We show that the FMSE of the KF is less than that of the MSCF. However, the TMSE of the KF is greater than that of the MSCF under certain conditions. Illustrative examples are provided to verify the analytical results.

Author(s):  
Seyed Fakoorian ◽  
Mahmoud Moosavi ◽  
Reza Izanloo ◽  
Vahid Azimi ◽  
Dan Simon

Non-Gaussian noise may degrade the performance of the Kalman filter because the Kalman filter uses only second-order statistical information, so it is not optimal in non-Gaussian noise environments. Also, many systems include equality or inequality state constraints that are not directly included in the system model, and thus are not incorporated in the Kalman filter. To address these combined issues, we propose a robust Kalman-type filter in the presence of non-Gaussian noise that uses information from state constraints. The proposed filter, called the maximum correntropy criterion constrained Kalman filter (MCC-CKF), uses a correntropy metric to quantify not only second-order information but also higher-order moments of the non-Gaussian process and measurement noise, and also enforces constraints on the state estimates. We analytically prove that our newly derived MCC-CKF is an unbiased estimator and has a smaller error covariance than the standard Kalman filter under certain conditions. Simulation results show the superiority of the MCC-CKF compared with other estimators when the system measurement is disturbed by non-Gaussian noise and when the states are constrained.


Entropy ◽  
2017 ◽  
Vol 19 (12) ◽  
pp. 648 ◽  
Author(s):  
Bowen Hou ◽  
Zhangming He ◽  
Xuanying Zhou ◽  
Haiyin Zhou ◽  
Dong Li ◽  
...  

Author(s):  
Baojian Yang ◽  
Lu Cao ◽  
Dechao Ran ◽  
Bing Xiao

Due to unavoidable factors, heavy-tailed noise appears in satellite attitude estimation. Traditional Kalman filter is prone to performance degradation and even filtering divergence when facing non-Gaussian noise. The existing robust algorithms have limited accuracy. To improve the attitude determination accuracy under non-Gaussian noise, we use the centered error entropy (CEE) criterion to derive a new filter named centered error entropy Kalman filter (CEEKF). CEEKF is formed by maximizing the CEE cost function. In the CEEKF algorithm, the prior state values are transmitted the same as the classical Kalman filter, and the posterior states are calculated by the fixed-point iteration method. The CEE EKF (CEE-EKF) algorithm is also derived to improve filtering accuracy in the case of the nonlinear system. We also give the convergence conditions of the iteration algorithm and the computational complexity analysis of CEEKF. The results of the two simulation examples validate the robustness of the algorithm we presented.


2018 ◽  
Author(s):  
◽  
Tao Sun

[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT AUTHOR'S REQUEST.] Nonlinear estimation and filtering have been intensively studied for decades since it has been widely used in engineering and science such as navigation, radar signal processing and target tracking systems. Because the posterior density function is not a Gaussian distribution, then the optimal solution is intractable. The nonlinear/non-Gaussian estimation problem is more challenging than the linear/Gaussian case, which has an optimal closed form solution, i.e. the celebrated Kalman filter. Many nonlinear filters including the extended Kalman filter, the unscented Kalman filter and the Gaussian-approximation filters, have been proposed to address nonlinear/non-Gaussian estimation problems in the past decades. Although the estimate yield by Gaussian-approximation filters such as cubature Kalman filters and Gaussian-Hermite quadrature filters is satisfied in many applications, there are two obvious drawbacks embedded in the use of Gaussian filters. On the one hand, with the increase of the quadrature points, much computational effort is devoted to approximate Gaussian integrals, which is not worthy sometimes. On the other hand, by the use of the update rule, the estimate constrains to be a linear function of the observation. In this dissertation, we aim to address this two shortcoming associated with the conventional nonlinear filters. We propose two nonlinear filters in the dissertation. Based on an adaptive strategy, the first one tries to reduce the computation cost during filtering without sacrificing much accuracy, because when the system is close to be linear, the lower level Gaussian quadrature filter is sufficient to provide accurate estimate. The adaptive strategy is used to evaluate the nonlinearity of the system at current time first and then utilize different quadrature rule for filtering. Another filter aims to modify the conventional update rule, i.e. the linear minimum mean square error (LMMSE) rule, to involve a nonlinear transformation of the observation, which is proven to be an efficient way to exploit more information from the original observation. According to the orthogonal property, we propose a novel approach to construct the nonlinear transformation systematically. The augmented nonlinear filter outperforms Gaussian filters and other conventional augmented filters in terms of the root mean square error and onsistency. Furthermore, we also extend the work to the more general case. The higher order moments can be utilized to construct the nonlinear transformation and in turn, the measurement space can be expand efficiently. Without the Gaussian assumption, the construction of the nonlinear transformation only demand the existence of a finite number of moments. Finally, the simulation results validate and demonstrate the superiority of the adaptive and augmented nonlinear filters.


Entropy ◽  
2022 ◽  
Vol 24 (1) ◽  
pp. 117
Author(s):  
Xuyou Li ◽  
Yanda Guo ◽  
Qingwen Meng

The maximum correntropy Kalman filter (MCKF) is an effective algorithm that was proposed to solve the non-Gaussian filtering problem for linear systems. Compared with the original Kalman filter (KF), the MCKF is a sub-optimal filter with Gaussian correntropy objective function, which has been demonstrated to have excellent robustness to non-Gaussian noise. However, the performance of MCKF is affected by its kernel bandwidth parameter, and a constant kernel bandwidth may lead to severe accuracy degradation in non-stationary noises. In order to solve this problem, the mixture correntropy method is further explored in this work, and an improved maximum mixture correntropy KF (IMMCKF) is proposed. By derivation, the random variables that obey Beta-Bernoulli distribution are taken as intermediate parameters, and a new hierarchical Gaussian state-space model was established. Finally, the unknown mixing probability and state estimation vector at each moment are inferred via a variational Bayesian approach, which provides an effective solution to improve the applicability of MCKFs in non-stationary noises. Performance evaluations demonstrate that the proposed filter significantly improves the existing MCKFs in non-stationary noises.


2020 ◽  
Vol 10 (15) ◽  
pp. 5045 ◽  
Author(s):  
Ming Lin ◽  
Byeongwoo Kim

The location of the vehicle is a basic parameter for self-driving cars. The key problem of localization is the noise of the sensors. In previous research, we proposed a particle-aided unscented Kalman filter (PAUKF) to handle the localization problem in non-Gaussian noise environments. However, the previous basic PAUKF only considers the infrastructures in two dimensions (2D). This previous PAUKF 2D limitation rendered it inoperable in the real world, which is full of three-dimensional (3D) features. In this paper, we have extended the previous basic PAUKF’s particle weighting process based on the multivariable normal distribution for handling 3D features. The extended PAUKF also raises the feasibility of fusing multisource perception data into the PAUKF framework. The simulation results show that the extended PAUKF has better real-world applicability than the previous basic PAUKF.


2017 ◽  
Vol 145 (5) ◽  
pp. 1897-1918 ◽  
Author(s):  
Jonathan Poterjoy ◽  
Ryan A. Sobash ◽  
Jeffrey L. Anderson

Abstract Particle filters (PFs) are Monte Carlo data assimilation techniques that operate with no parametric assumptions for prior and posterior errors. A data assimilation method introduced recently, called the local PF, approximates the PF solution within neighborhoods of observations, thus allowing for its use in high-dimensional systems. The current study explores the potential of the local PF for atmospheric data assimilation through cloud-permitting numerical experiments performed for an idealized squall line. Using only 100 ensemble members, experiments using the local PF to assimilate simulated radar measurements demonstrate that the method provides accurate analyses at a cost comparable to ensemble filters currently used in weather models. Comparisons between the local PF and an ensemble Kalman filter demonstrate benefits of the local PF for producing probabilistic analyses of non-Gaussian variables, such as hydrometeor mixing ratios. The local PF also provides more accurate forecasts than the ensemble Kalman filter, despite yielding higher posterior root-mean-square errors. A major advantage of the local PF comes from its ability to produce more physically consistent posterior members than the ensemble Kalman filter, which leads to fewer spurious model adjustments during forecasts. This manuscript presents the first successful application of the local PF in a weather prediction model and discusses implications for real applications where nonlinear measurement operators and nonlinear model processes limit the effectiveness of current Gaussian data assimilation techniques.


2011 ◽  
Vol 57 (4) ◽  
pp. 2371-2385 ◽  
Author(s):  
Dongning Guo ◽  
Yihong Wu ◽  
Shlomo Shamai ◽  
Sergio Verdú

Sign in / Sign up

Export Citation Format

Share Document