scholarly journals Natural Convective Heat Transfer From the Horizontal Isothermal Surface of Polygons of Octagonal and Hexagonal Shapes

2019 ◽  
Vol 11 (5) ◽  
Author(s):  
Ahmad Kalendar ◽  
Abdulrahim Kalendar ◽  
Yousuf Alhendal ◽  
Sayed Karar ◽  
Adel Alenzi ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Prandtl Number ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Surface Shape ◽  
Aspect Ratios ◽  
Complex Shapes ◽  
The Mean ◽  
Adiabatic Surface ◽  
Rayleigh Numbers

Heat transfer often occurs effectively from horizontal elements of relatively complex shapes in natural convective cooling of electronic and electrical devices used in industrial applications. The effect of complex surface shapes on laminar natural convective heat transfer from horizontal isothermal polygons of hexagonal and octagonal flat surfaces facing upward and downward of different aspect ratios has been numerically investigated. The polygons’ surface is embedded in a large surrounding plane adiabatic surface, where the adiabatic surface is in the same plane as the surface of the heated element. For the Boussinesq approach used in this work, the density of the fluid varies with temperature, which causes the buoyancy force, while other fluid properties are assumed constants. The numerical solution of the full three-dimensional form of governing equations is obtained by using the finite volume method-based computational fluid dynamics (CFD) code, FLUENT14.5. The solution parameters include surface shape, dimensionless surface width, different characteristic lengths, the Rayleigh number, and the Prandtl number. These parameters are considered as follows: the Prandtl number is 0.7, the Rayleigh numbers are between 103 and 108, and for various surface shapes the width-to-height ratios are between 0 and 1. The effect of different characteristic lengths has been investigated in defining the Nusselt and Rayleigh numbers for such complex shapes. The effect of these parameters on the mean Nusselt number has been studied, and correlation equations for the mean heat transfer rate have been derived.

Natural Convective Heat Transfer Through a Liquid Between a Heated Horizontal Surface and a Vertical Fin Attached to a Cooled Surface

1999 ◽  
Author(s):  
Patrick H. Oosthuizen
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Prandtl Number ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Lower Surface ◽  
Horizontal Surface ◽  
Finite Element Procedure ◽  
Liquid Depth ◽  
Rayleigh Numbers

Abstract Natural convective heat transfer from a heated horizontal surface directly exposed to a liquid into which vertical fins, attached to a cooled horizontal surface, project vertically downwards has been numerically studied. It has been assumed that the flow is steady, laminar and two-dimensional. The governing equations have been written in terms of dimensionless variables and have been solved using the finite element procedure. The solution has the following parameters: the Rayleigh number, the Prandtl number, the dimensionless half-width i.e. the ratio of the half-distance between the fins to the liquid depth, the dimensionless gap between the bottom of the fin and the lower surface, and the ratio of the thermal conductivity of the fin material to that of the liquid. Because of the application being considered, the Prandtl number has been taken as 5. Solutions have been obtained for Rayleigh numbers of between 10 and 1,000,000 for dimensionless half-widths of between 1 and 0.2 for thermal conductivity ratios of 20, 10 and 4 for a range of dimensionless fin gaps and widths.

A Numerical Study of Natural Convective Heat Transfer From Isothermal High Aspect Ratio Rectangular Cylinders

2013 ◽  
Author(s):  
Patrick H. Oosthuizen
Keyword(s):  
Heat Transfer ◽  
Prandtl Number ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Numerical Study ◽  
Width Ratio ◽  
Heated Cylinder ◽  
Aspect Ratios ◽  
Study Results ◽  
Rectangular Cylinders

Natural convective heat transfer from isothermal rectangular cylinders which have an exposed upper surface has been numerically studied. The cylinders considered have high aspect ratios, i.e., have high width-to-depth ratios, and are relatively short, i.e., have a “height” that is of the same order of magnitude as their width. The cylinders considered are mounted on a plane adiabatic base, the cylinders being normal to the plane base with the cylinders pointing either vertically upwards or vertically downwards. One of the main aims of the present work was to numerically determine how the depth-to-width ratio of the rectangular cylinder influences the mean heat transfer rate from the cylinder when this depth-to-width ratio is large. The flow has also been assumed to be steady and laminar and it has been assumed that the fluid properties are constant except for the density change with temperature which gives rise to the buoyancy forces, this having been treated by using the Boussinesq approach. The solution has been obtained by numerically solving the governing equations using the commercial CFD solver, ANSYS FLUENT©. The solution is dependent on the Rayleigh number, the ratio of the width to the height of the heated cylinder, the ratio of the width to the depth of the heated cylinder, the Prandtl number, Pr, and on whether the cylinder is pointing vertically upwards or vertically downwards. Because of the applications that motivated this study, results have only been obtained for a Prandtl number of 0.74, i.e., effectively the value for air. A range of the other governing parameters has been considered and the effects of these governing parameters on the Nusselt number variation have been examined.

A Numerical Study of the Simultaneous Natural Convective Heat Transfer From the Upper and Lower Surfaces of a Thin Isothermal Horizontal Circular Plate

2016 ◽  
Author(s):  
Patrick H. Oosthuizen ◽  
Abdulrahim Kalendar
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Rayleigh Number ◽  
Prandtl Number ◽  
Convective Heat Transfer ◽  
Heat Transfer Rate ◽  
Convective Heat ◽  
Transfer Rate ◽  
The Mean ◽  
Adiabatic Section

Natural convective heat transfer from the top and bottom surfaces of a thin circular isothermal horizontal plate which, in general, has a centrally placed adiabatic section has been numerically investigated. The temperature of the plate surfaces is higher than the temperature of the surrounding fluid. The range of conditions considered is such that laminar, transitional, and turbulent flow occurs over the plate. The heat transfer from the upper and lower surfaces of the plate as well as the mean heat transfer rate from the entire surface of the plate have been considered. The flow has been assumed to be axisymmetric and steady. The k-epsilon turbulence model with account being taken of buoyancy force effects has been used and the solution has been obtained using the commercial CFD solver ANSYS FLUENT©. The heat transfer rate from the heated plate has been expressed in terms of a Nusselt number based on the outside plate diameter and the difference between the plate temperature and the fluid temperature far from the plate. The mean Nusselt number is dependent on the Rayleigh number, the ratio of the diameter of the inner adiabatic section to the outer plate diameter, and the Prandtl number. Results have only been obtained for a Prandtl number of 0.74, i.e., effectively the value for air. The variations of the mean Nusselt number averaged over both the upper and lower surfaces and of the mean Nusselt numbers for the upper surface and for the lower surface with Rayleigh number for various adiabatic section diameter ratios have been studied. The use of a reference length scale to allow the correlation of these mean Nusselt number-Rayleigh number variations has been investigated.

An Interaction of Natural Convective Heat Transfer From Two Adjacent Isothermal Narrow Vertical and Inclined Flat Plates

2009 ◽  
Author(s):  
Abdulrahim Kalendar ◽  
Patrick H. Oosthuizen ◽  
Bader Kalandar
Keyword(s):  
Heat Transfer ◽  
Prandtl Number ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Three Dimensional ◽  
Flat Plates ◽  
Plate Height ◽  
Fluid Properties ◽  
Adiabatic Surface ◽  
Plate Width

Natural convective heat transfer from a two narrow adjacent rectangular isothermal flat plates of the same size embedded in a plane adiabatic surface, the adiabatic surface being in the same plane as the surfaces of the heated plates, has been numerically investigated. The two plates have the same surface temperature and they are aligned with each other but are separated form each other by a relatively small gap. Results for the case where the plates are vertical and where they are inclined at positive or negative angles to the vertical have been obtained. It has been assumed that the fluid properties are constant except for the density change with temperature which gives rise to the buoyancy forces, this having been treated using the Boussinesq approach. It has also been assumed that the flow is symmetrical about the vertical center plane between the two plates. The solution has been obtained by numerically solving the full three-dimensional form of governing equations, these equations being written in dimensionless form. The solution was obtained using the commercial finite volume method based cfd code, FLUENT. The solution has the Rayleigh number, the dimensionless plate width, the angle of inclination, the dimensionless gap between two flat plates, and the Prandtl number as parameters. Results have only been obtained for a Prandtl number of 0.7 Results have been obtained for Rayleigh numbers between 103 and 107 for plate width-to-height ratios of between 0.15 and 0.6, for gap between the adjacent edges to plate height ratios of between 0 and 0.2, for angles of inclination between +45° and −45°.

The Effect of Thermal Wall Properties on Natural Convection in Inclined Rectangular Cells

1982 ◽  
Vol 104 (1) ◽  
pp. 111-117 ◽  
Author(s):  
B. A. Meyer ◽  
J. W. Mitchell ◽  
M. M. El-Wakil
Keyword(s):  
Heat Transfer ◽  
Cell Wall ◽  
Natural Convection ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Conductive Heat ◽  
Numerical Work ◽  
Aspect Ratios ◽  
Convection Problem ◽  
Natural Convection Problem

The effects of cell wall thickness and thermal conductivity on natural convective heat transfer within inclined rectangular cells was studied. The cell walls are thin, and the hot and cold surfaces are isothermal. The two-dimensional natural convection problem was solved using finite difference techniques. The parameters studied were cell aspect ratios (A) of 0.5 and 1, Rayleigh numbers (Ra) up to 105, a Prandtl number (Pr) of 0.72 and a tilt angle (φ) of 60 deg. These parameters are of interest in solar collectors. The numerical results are substantiated by experimental results. It was found that convection coefficients for cells with adiabatic walls are substantially higher than those for cells with conducting walls. Correlations are given for estimating the convective heat transfer across the cell and the conductive heat transfer across the cell wall. These correlations are compared with available experimental and numerical work of other authors.

A Study of Three-Dimensional Mixed Convective Heat Transfer From Short Vertical Cylinders in a Horizontal Forced Flow

2000 ◽  
Author(s):  
David A. Scott ◽  
P. H. Oosthuizen
Keyword(s):  
Heat Transfer ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Three Dimensional ◽  
Forced Flow ◽  
Low Velocity ◽  
Buoyancy Forces ◽  
The Mean ◽  
Mixed Convective Flow ◽  
Comparison Of The Results

Abstract Heat transfer from relatively short vertical isothermal cylinders in a horizontal forced fluid flow has been considered. The flow conditions are such that the buoyancy forces resulting from the temperature differences in the flow are in general significant despite of the presence of a horizontal forced flow of air, that is, mixed convective flow exists. Because the cylinders are short and the buoyancy forces act normal to the forced flow, three-dimensional flow exists. The experiments were performed in a low velocity, open jet wind tunnel. The study involved the experimental determination of the mean heat transfer coefficient and a comparison of the results with a previous numerical analysis. Mean heat transfer rates were determined using the ‘lumped capacity’ method. The mean Nusselt number has the Reynolds number, Grashof number and the height to diameter ratio of the cylinders as parameters. The results have been used to determine the conditions under which the flow departs from purely forced convection and enters the mixed convection regime, i.e., determining the conditions for which the buoyancy effects should be included in convective heat transfer calculations for short cylinders.

Effect of Edge Conditions on Natural Convective Heat Transfer From a Narrow Vertical Flat Plate With a Uniform Surface Heat Flux

2007 ◽  
Author(s):  
Patrick H. Oosthuizen ◽  
Jane T. Paul
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Surface Heat Flux ◽  
Three Dimensional ◽  
Surface Heat ◽  
Heated Plate ◽  
Two Dimensional ◽  
Adiabatic Surface

Two-dimensional natural convective heat transfer from vertical plates has been extensively studied. However, when the width of the plate is relatively small compared to its height, the heat transfer rate can be greater than that predicted by these two-dimensional flow results. Because situations that can be approximately modelled as narrow vertical plates occur in a number of practical situations, there exists a need to be able to predict heat transfer rates from such narrow plates. Attention has here been given to a plate with a uniform surface heat flux. The magnitude of the edge effects will, in general, depend on the boundary conditions existing near the edge of the plate. To examine this effect, two situations have been considered. In one, the heated plate is imbedded in a large plane adiabatic surface, the surfaces of the heated plane and the adiabatic surface being in the same plane while in the second there are plane adiabatic surfaces above and below the heated plate but the edge of the plate is directly exposed to the surrounding fluid. The flow has been assumed to be steady and laminar and it has been assumed that the fluid properties are constant except for the density change with temperature which gives rise to the buoyancy forces, this having been treated by using the Boussinesq approach. It has also been assumed that the flow is symmetrical about the vertical centre-plane of the plate. The solution has been obtained by numerically solving the full three-dimensional form of the governing equations, these equations being written in terms of dimensionless variables. Results have only been obtained for a Prandtl number of 0.7. A wide range of the other governing parameters have been considered for both edge situations and the conditions under which three dimensional flow effects can be neglected have been deduced.

An Experimental Study of Convective Heat Transfer in Radially Rotating Rectangular Ducts

1991 ◽  
Vol 113 (3) ◽  
pp. 604-611 ◽  
Author(s):  
C. Y. Soong ◽  
S. T. Lin ◽  
G. J. Hwang
Keyword(s):  
Heat Transfer ◽  
Experimental Study ◽  
Reynolds Number ◽  
Aspect Ratio ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Rotational Speed ◽  
Main Flow ◽  
Buoyancy Flow ◽  
Aspect Ratios

The paper presents an experimental study of convective heat transfer in radially rotating isothermal rectangular ducts with various height and width aspect ratios. The convective heat transfer is affected by secondary flows resulting from Coriolis force and the buoyancy flow, which is in turn due to the centrifugal force in the duct. The growth and strength of the secondary flow depend on the rotational Reynolds number; the effect of the buoyancy flow is characterized by the rotational Rayleigh number. The aspect ratio of the duct may affect the secondary flow and the buoyancy flow, and therefore is also a critical parameter in the heat transfer mechanism. In the present work the effects of the main flow, the rotational speed, and the aspect ratio γ on heat transfer are subjects of major interest. Ducts of aspect ratios γ=5, 2, 1, 0.5, and 0.2 at rotational speed up to 3000 rpm are studied. The main flow Reynolds number ranges from 700 to 20,000 to cover the laminar, transitional, and turbulent flow regimes in the duct flow. Test data and discussion are presented.

Sign in / Sign up

Export Citation Format

Share Document