Three-Dimensional Unit Cell Study of a Porous Bulk Metallic Glass Under Various Stress States

2019 ◽  
Vol 86 (6) ◽  
Author(s):  
S Gouripriya ◽  
Parag Tandaiya
Keyword(s):  
Volume Fraction ◽  
Hydrostatic Stress ◽  
Three Dimensional ◽  
High Strength ◽  
Absorption Capacity ◽  
Unit Cell ◽  
Wide Range ◽  
Tension And Compression ◽  
Softening Parameter ◽  
Stress States

Porous bulk metallic glasses (BMGs) exhibit an excellent combination of superior mechanical properties such as high strength, high resilience, large malleability, and energy absorption capacity. However, a mechanistic understanding of their response under diverse states of stress encountered in practical load-bearing applications is lacking in the literature. In this work, this gap is addressed by performing three-dimensional finite element simulations of porous BMGs subjected to a wide range of tensile and compressive states of stress. A unit cell approach is adopted to investigate the mechanical behavior of a porous BMG having 3% porosity. A parametric study of the effect of stress triaxialities T = 0, ±1/3, ±1, ±2, ±3, and ±∞, which correspond to stress states ranging from pure deviatoric stress to pure hydrostatic stress under tension and compression, is conducted. Apart from the influence of T, the effects of friction parameter, strain-softening parameter and Poisson’s ratio on the mechanics of deformation of porous BMGs are also elucidated. The results are discussed in terms of the simulated stress-strain curves, pore volume fraction evolution, strain to failure, and development of plastic deformation near the pore. The present results have important implications for the design of porous BMG structures.

scholarly journals High strength and conductive hydrogel with fully interpenetrated structure from alginate and acrylamide

e-Polymers ◽  
2021 ◽  
Vol 21 (1) ◽  
pp. 391-397
Author(s):  
Tao Liu ◽  
Ripeng Zhang ◽  
Jianzhi Liu ◽  
Ling Zhao ◽  
Yueqin Yu
Keyword(s):  
Mechanical Performance ◽  
Three Dimensional ◽  
High Strength ◽  
Extreme Environment ◽  
Natural Polymers ◽  
Conductive Hydrogel ◽  
Wide Range ◽  
Interpenetrated Structure ◽  
Conductive Hydrogels ◽  
Conductive Properties

Abstract Highly stretched and conductive hydrogels, especially synthetized from natural polymers, are beneficial for highly stretched electronic equipment which is applied in extreme environment. We designed and prepared robust and tough alginate hydrogels (GMA-SA-PAM) using the ingenious strategy of fully interpenetrating cross-linking, in which the glycidyl methacrylate (GMA) was used to modify sodium alginate (SA) and then copolymerized with acrylamide (AM) and methylenebisacrylamide (BIS) as cross-linkers. The complete cross-linked structures can averagely dissipate energy and the polymer structures can maintain hydrogels that are three-dimensional to greatly improve the mechanical performance of hydrogels. The GMA-SA-PAM hydrogels display ultra-stretchable (strain up to ∼407% of tensile strain) and highly compressible (∼57% of compression strain) properties. In addition, soaking the GMA-SA-PAM hydrogel in 5 wt% NaCl solution also endows the conductivity of the hydrogel (this hydrogel was named as GSP-Na) with excellent conductive properties (5.26 S m−1). The GSP-Na hydrogel with high stability, durability, as well as wide range extent sensor is also demonstrated by researching the electrochemical signals and showing the potential for applications in wearable and quickly responded electronics.

Distributed Design of Two-Scale Structures With Unit Cells

2019 ◽  
Author(s):  
Xingchen Liu
Keyword(s):  
Material Property ◽  
Material Properties ◽  
Volume Fraction ◽  
Base Material ◽  
Structure Design ◽  
Unit Cell ◽  
Steady Increase ◽  
Coarse Scale ◽  
Cell Structures ◽  
Wide Range

Abstract The use of unit cell structures in mechanical design has seen a steady increase due to their abilities to achieve a wide range of material properties and accommodate multi-functional requirements with a single base material. We propose a novel material property envelope (MPE) that encapsulates the attainable effective material properties of a given family of unit cell structures. The MPE interfaces the coarse and fine scales by constraining the combinations of the competing material properties (e.g., volume fraction, Young’s modulus, and Poisson’s ratio of isotropic materials) during the design of coarse scale material properties. In this paper, a sampling and reconstruction approach is proposed to represent the MPE of a given family of unit cell structures with the method of moving least squares. The proposed approach enables the analytical derivatives of the MPE, which allows the problem to be solved more accurately and efficiently during the design optimization of the coarse scale effective material property field. The effectiveness of the proposed approach is demonstrated through a two-scale structure design with octet trusses that have cubically symmetric effective stiffness tensors.

Improving UV Resistance of Fibers: Idealized Computational Model Predicting the Distribution of UV Blocking Cylindrical Nanoparticles in Protective Polymeric Layer

2015 ◽  
Vol 10 (1) ◽  
pp. 155892501501000
Author(s):  
Abdelfattah Mohamed Seyam ◽  
Rahul Vallabh ◽  
Ahmed H. Hassanin
Keyword(s):  
Aspect Ratio ◽  
Computational Model ◽  
High Performance ◽  
Volume Fraction ◽  
Three Dimensional ◽  
High Strength ◽  
Uv Protection ◽  
Uv Resistance ◽  
Premature Failure ◽  
Areal Coverage

High strength fibers such as PBO and Kevlar are used to produce composites, bulletproof vests, tendons of giant scientific balloons, and other high performance products. These fibers, however, are known to degrade upon exposure to Ultraviolet (UV) radiation which causes premature failure of the end-products. Improving UV resistance of high strength fibers like PBO through methods such as adding UV inhibiting particles during filament spinning or dyeing/coating process is not only extremely difficult, but often fails to provide the adequate UV protection. As an alternative to conventional approaches, UV protection of high performance yarns/braids can be effectively achieved by covering them with a polymeric sheath containing dispersed UV inhibiting nanoparticles. In this work, a computational model was developed to optimize critical factors such as thickness (weight) of the protective sheath and the amount of UV blockers for a given particle size, which influence the UV protective efficiency of the sheath. In order to simulate three-dimensional dispersion of nanoparticles in a polymer matrix, the model considers a random distribution of cylindrical nanoparticles of different size, aspect ratio, and volume fraction in a three-dimensional volume of protective sheath of a given length, width, and thickness. 2D visualization and image analysis techniques were utilized to determine the area projected by the particles on the x-y plane (areal coverage provided by nanoparticles). The areal coverage values obtained from the model were found to be higher than the experimental results due to the agglomeration of nanoparticles in the sheath caused during the polymer compounding process. However, the purpose of the model is to serve as a benchmarking tool to aid in the design and development of UV protective sheaths and films, and not to estimate absolute UV protection values. Analysis of the relationship between areal coverage and various input parameters in the model show that areal coverage increases with an increase in particle volume fraction and film thickness, and a decrease in particle diameter and length. It was also found that areal coverage was more significantly influenced by particle aspect ratio than by particle length.

scholarly journals Effects of Hooked-End Steel Fiber Geometry and Volume Fraction on the Flexural Behavior of Concrete Pedestrian Decks

2019 ◽  
Vol 9 (6) ◽  
pp. 1241 ◽  
Author(s):  
Seung-Jung Lee ◽  
Doo-Yeol Yoo ◽  
Do-Young Moon
Keyword(s):  
Flexural Strength ◽  
Steel Fiber ◽  
Volume Fraction ◽  
Three Dimensional ◽  
High Strength ◽  
Flexural Behavior ◽  
Multiple Cracks ◽  
Fiber Volume ◽  
Volume Fractions ◽  
Steel Rebars

This study investigates the effects of hooked-end fiber geometry and volume fraction on the flexural behavior of concrete pedestrian decks. To achieve this, three different fiber geometries, i.e., three-dimensional (3D), four-dimensional (4D), and five-dimensional (5D), and volume fractions of 0.37%, 0.6%, and 1.0% were considered. Test results indicate that a higher number of hook ends can more effectively enhance the flexural strength and flexural strength margin at all volume fractions than a lower number, so that the order of effectiveness of hooked-end fibers on the flexural strength parameters was as follows: 5D > 4D > 3D. To satisfy the ductility index of 0.39, the amounts of 3D, 4D, and 5D hooked steel fibers should be in the range of 0.98%‒1.10%. Moreover, at a fiber volume fraction of 1.0%, only multiple cracking behaviors were observed, and the numerical results indicated that the volume fraction should be equal to 1.0% to guarantee a deflection-hardening response of pedestrian decks, regardless of the hooked-end fiber geometry. Consequently, a 1.0% by volume of hooked-end steel fiber is recommended to replace the minimum longitudinal steel rebars and guarantee a ductile flexural behavior with multiple cracks for pedestrian decks made of high-strength concrete.

A Methodology for Synthesizing High-Performance Robots Fabricated With Optimally Tailored Composite Laminates

1987 ◽  
Vol 109 (1) ◽  
pp. 74-86 ◽  
Author(s):  
C. K. Sung ◽  
B. S. Thompson
Keyword(s):  
Composite Laminates ◽  
High Performance ◽  
Volume Fraction ◽  
Three Dimensional ◽  
High Strength ◽  
Fiber Volume ◽  
Cross Sectional ◽  
Fiber Properties ◽  
Robot Arms ◽  
The Matrix

An essential ingredient of the next generation of robotic manipulators will be high-strength lightweight arms which promise high-performance characteristics. Currently, a design methodology for optimally synthesizing these essential robotic components does not exist. Herein, an approach is developed for addressing this void in the technology-base by integrating state-of-the-art techniques in both the science of composite materials and also the science of flexible robotic systems. This approach is based on the proposition that optimal performance can be achieved by fabricating robot arms with optimal cross-sectional geometries fabricated with optimally tailored composite laminates. A methodology is developed herein which synthesizes the manufacturing specification for laminates which are specifically tailored for robotic applications in which both high-strength, high-stiffness robot arms are required which also possess high material damping. The parameters in the manufacturing specification include the fiber-volume fraction, the matrix properties, the fiber properties, the ply layups, the stacking sequence and the ply thicknesses. This capability is then integrated within a finite-element methodology for analyzing the dynamic response of flexible robots. An illustrative example demonstrates the approach by simulating the three-dimensional elastodynamic response of a robot subjected to a prescribed spatial maneuver.

Experimental study on the mechanical properties of biological hydrogels of different concentrations

2020 ◽  
Vol 28 (6) ◽  
pp. 685-695
Author(s):  
Khurshid Alam ◽  
Anwarul Hasan ◽  
Muhammad Iqbal ◽  
Jamal Umer ◽  
Sujan Piya
Keyword(s):  
Mechanical Properties ◽  
Elastic Modulus ◽  
Precise Measurement ◽  
Three Dimensional ◽  
Crosslinking Density ◽  
Compression Tests ◽  
Cell Functions ◽  
Wide Range ◽  
Tension And Compression ◽  
Cellular Mechanobiology

BACKGROUND: Biological hydrogels provide a conducive three-dimensional extracellular matrix environment for encapsulating and cultivating living cells. Microenvironmental modulus of hydrogels dictates several characteristics of cell functions such as proliferation, adhesion, self-renewal, differentiation, migration, cell morphology and fate. Precise measurement of the mechanical properties of gels is necessary for investigating cellular mechanobiology in a variety of applications in tissue engineering. Elastic properties of gels are strongly influenced by the amount of crosslinking density. OBJECTIVE: The main purpose of the present study was to determine the elastic modulus of two types of well-known biological hydrogels: Agarose and Gelatin Methacryloyl. METHODS: Mechanical properties such as Young’s modulus, fracture stress and failure strain of the prescribed gels with a wide range of concentrations were determined using tension and compression tests. RESULTS: The elastic modulus, failure stress and strain were found to be strongly influenced when the amount of concentration in the hydrogels was changed. The elastic modulus for a lower level of concentration, not considered in this study, was also predicted using statistical analysis. CONCLUSIONS: Closed matching of the mechanical properties of the gels revealed that the bulk tension and compression tests could be confidently used for assessing mechanical properties of delicate biological hydrogels.

A Constitutive Model for the Simulation of the Deformation Behavior of TWIP Steels

2015 ◽  
Vol 639 ◽  
pp. 411-418
Author(s):  
André Haufe ◽  
Andrea Erhart ◽  
Alexander Butz
Keyword(s):  
Finite Element ◽  
Constitutive Model ◽  
Volume Fraction ◽  
Kinematic Hardening ◽  
Flow Behavior ◽  
Three Dimensional ◽  
High Strength ◽  
Engineering System ◽  
Twip Steels ◽  
User Friendly

Due to their high strength (tensile strength > 1GPa) in combination with an extreme ductility (failure strain 30-50%) TWinning Induced Plasticity–steels (TWIP-steels) can be considered as promising materials for the production of lightweight automotive components. The industrial application of TWIP-steels requires a fundamental experimental validation of the mechanical behavior as basis for an user-friendly but at the same time accurate constitutive framework and its implementation into commercial Finite Element codes. Related investigations and implementations in order to allow for the simulation of TWIP-steel forming processes are currently conducted within the research project “TWIP4EU”, executed as a cooperation of Fraunhofer - Institut für Werkstoffmechanik IWM in Freiburg (Germany), Salzgitter Mannesmann Forschung GmbH (Germany), Swerea KIMAB (Sweden), Faurecia Autositze GmbH (Germany / France), DYNAmore GmbH (Germany) and ESI GmbH Engineering System (Germany / France).The monotonic one-dimensional hardening behavior of TWIP-steels as a function of the twin volume fraction and dislocation density has been described by Bouaziz et al. (2008), Bouaziz et al. (2011). This model has been proven to be adequate for the description of the flow behavior of TWIP-steels and serves as basis for the constitutive model, presented here. This Bouaziz-model has been extended to a three-dimensional elasto-plastic formulation, including the influence of different loading conditions, anisotropy and kinematic hardening. The present paper deals with the implementation for solids and shells in the commercial Finite Element Code LS-DYNA®and appropriate validation simulations will be presented.

Powder Metallurgy of Nanostructured High Strength Materials

2007 ◽  
Vol 534-536 ◽  
pp. 1405-1408 ◽  
Author(s):  
Jürgen Eckert ◽  
S. Scudino ◽  
P. Yu ◽  
C. Duhamel
Keyword(s):  
Powder Metallurgy ◽  
Deformation Behavior ◽  
Volume Fraction ◽  
High Strength ◽  
Mechanical Deformation ◽  
Intrinsic Properties ◽  
Mechanical Attrition ◽  
Wide Range ◽  
Multi Phase ◽  
Strength And Ductility

Nanostructured or partially amorphous Al- and Zr-based alloys are attractive candidates for advanced high-strength lightweight materials. The strength of such materials is often 2 – 3 times higher than the strength of commercial crystalline alloys. Further property improvements are achievable by designing multi-phase composite materials with optimized length scale and intrinsic properties of the constituent phases. Such alloys can be prepared by quenching from the melt or by powder metallurgy using mechanical attrition techniques. This paper focuses on mechanically attrited powders containing amorphous or nano-(quasi)crystalline phases and on their consolidation into bulk specimens. Selected examples of mechanical deformation behavior are presented, revealing that the properties can be tuned within a wide range of strength and ductility as a function of size and volume fraction of the different phases.

scholarly journals Hydrogen-related challenges for the steelmaker: the search for proper testing

2017 ◽  
Vol 375 (2098) ◽  
pp. 20160408 ◽  
Author(s):  
R. G. Thiessen
Keyword(s):  
Standardized Test ◽  
High Strength Steels ◽  
High Strength ◽  
Advanced High Strength Steels ◽  
Passenger Safety ◽  
Transportation Sector ◽  
Wide Range ◽  
Increased Sensitivity ◽  
Stress States ◽  
Increased Strength

The modern steelmaker of advanced high-strength steels has always been challenged with the conflicting targets of increased strength while maintaining or improving ductility. These new steels help the transportation sector, including the automotive sector, to achieve the goals of increased passenger safety and reduced emissions. With increasing tensile strengths, certain steels exhibit an increased sensitivity towards hydrogen embrittlement (HE). The ability to characterize the material's sensitivity in an as-delivered condition has been developed and accepted (SEP1970), but the complexity of the stress states that can induce an embrittlement together with the wide range of applications for high-strength steels make the development of a standardized test for HE under in-service conditions extremely challenging. Some proposals for evaluating the material's sensitivity give an advantage to materials with a low starting ductility. Despite this, newly developed materials can have a higher original elongation with only a moderate reduction in elongation due to hydrogen. This work presents a characterization of new materials and their sensitivity towards HE. This article is part of the themed issue ‘The challenges of hydrogen and metals’.

Multiphase Particle-in-Cell Simulations of Flow in a Gas-Solid Riser

Volume 1 ◽  
2004 ◽  
Author(s):  
K. A. Williams ◽  
D. M. Snider ◽  
J. R. Torczynski ◽  
S. M. Trujillo ◽  
T. J. O’Hern
Keyword(s):  
Gas Flow ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Three Dimensional ◽  
Extensive Study ◽  
Computational Results ◽  
Particle In Cell ◽  
Large Numbers ◽  
Wide Range ◽  
Experimental Values

The commercial computational fluid dynamics (CFD) code Arena-flow is used to simulate the transient, three-dimensional flow in a gas-solid riser at Sandia National Laboratories. Arena-flow uses a multiphase particle-in-cell (MP-PIC) numerical method. The gas flow is treated in an Eulerian manner, and the particle flow is represented in a Lagrangian manner by large numbers of discrete particle clouds with distributions of particle properties. Simulations are performed using the experimental values of the gas superficial velocity and the solids mass flux in the riser. Fluid catalytic cracking (FCC) particles are investigated. The experimental and computed pressure and solid-volume-fraction distributions are compared and found to be in reasonable agreement although the experimental results exhibit more variation along the height of the riser than the computational results do. An extensive study is performed to assess the sensitivity of the computational results to a wide range of physical and numerical parameters. The computational results are seen to be robust. Thus, the uncertainties in these parameters cannot account for the differences between the experimental and computational results.

Sign in / Sign up

Export Citation Format

Share Document