Numerical Analysis of the Deterministic Stresses Associated to Impeller-Tongue Interactions in a Single Volute Centrifugal Pump

2019 ◽  
Vol 141 (9) ◽  
Author(s):  
J. M. Fernández Oro ◽  
J. González ◽  
R. Barrio Perotti ◽  
M. Galdo Vega
Keyword(s):  
Numerical Analysis ◽  
Numerical Model ◽  
Centrifugal Pump ◽  
Turbulence Intensity ◽  
Three Dimensional ◽  
Relevant Information ◽  
Three Dimensional Flow ◽  
Deterministic Analysis ◽  
Starting Point ◽  
Flow Features

In this paper, a deterministic stress decomposition is applied over the numerical three-dimensional flow solution available for a single volute centrifugal pump. The numerical model has proven in previous publications its robustness to obtain the impeller to volute-tongue flow interaction, and it is now used as starting point for the current research. The main objective has been oriented toward a detailed analysis of the lack of uniformity in the flow that the volute tongue promotes on the blade-to-blade axisymmetric pattern. Through this analysis, the fluctuation field may be retrieved and main interaction sources have been pinpointed. The results obtained with the deterministic analysis become of paramount interest to understand the different flow features found in a typical centrifugal pump as a function of the flow rate. Moreover, this postprocessing tool provides an economic and easy procedure for designers to compare the different deterministic terms, also giving relevant information on the unresolved turbulence intensity scales. Complementarily, a way to model the turbulent effects in a systematic way is also presented, comparing their impact on the performance with respect to deterministic sources in a useful framework, that may be applied for similar kinds of pumps.

Effects of Reynolds Number and Freestream Turbulence on Turbine Tip Clearance Flow

2005 ◽  
Vol 128 (1) ◽  
pp. 166-177 ◽  
Author(s):  
Takayuki Matsunuma
Keyword(s):  
Reynolds Number ◽  
Turbulence Intensity ◽  
Three Dimensional ◽  
Tip Clearance ◽  
Pressure Probe ◽  
Turbine Cascade ◽  
Freestream Turbulence ◽  
Tip Leakage Flow ◽  
Three Dimensional Flow ◽  
Dimensional Flow

Tip clearance losses represent a major efficiency penalty of turbine blades. This paper describes the effect of tip clearance on the aerodynamic characteristics of an unshrouded axial-flow turbine cascade under very low Reynolds number conditions. The Reynolds number based on the true chord length and exit velocity of the turbine cascade was varied from 4.4×104 to 26.6×104 by changing the velocity of fluid flow. The freestream turbulence intensity was varied between 0.5% and 4.1% by modifying turbulence generation sheet settings. Three-dimensional flow fields at the exit of the turbine cascade were measured both with and without tip clearance using a five-hole pressure probe. Tip leakage flow generated a large high total pressure loss region. Variations in the Reynolds number and freestream turbulence intensity changed the distributions of three-dimensional flow, but had no effect on the mass-averaged tip clearance loss of the turbine cascade.

Amplification of three-dimensional perturbations during parallel vortex–cylinder interaction

2007 ◽  
Vol 573 ◽  
pp. 457-478
Author(s):  
X. LIU ◽  
J. S. MARSHALL
Keyword(s):  
Computational Study ◽  
Three Dimensional ◽  
Front Surface ◽  
Inviscid Flow ◽  
Reynolds Numbers ◽  
Three Dimensional Flow ◽  
Dimensional Flow ◽  
Flow Features ◽  
Volume Method ◽  
Proper Orthogonal

A computational study has been performed to examine the amplification of three-dimensional flow features as a vortex with small-amplitude helical perturbations impinges on a circular cylinder whose axis is parallel to the nominal vortex axis. For sufficiently weak vortices with sufficiently small core radius in an inviscid flow, three-dimensional perturbations on the vortex core are indefinitely amplified as the vortex wraps around the cylinder front surface. The paper focuses on the effect of viscosity in regulating amplification of three-dimensional disturbances and on assessing the ability of two-dimensional computations to accurately model parallel vortex–cylinder interaction problems. The computations are performed using a multi-block structured finite-volume method for an incompressible flow, with periodic boundary conditions along the cylinder axis. Growth of three-dimensional flow features is examined using a proper-orthogonal decomposition of the Fourier-transformed vorticity field in the azimuthal and axial directions. The interaction is examined for different axial wavelengths and amplitudes of the initial helical vortex waves and for three different Reynolds numbers.

Numerical Analysis of Three-Dimensional Flow in an Industry-Size Hydrothermal Autoclave Subjected to Non-Uniform Heating

2002 ◽  
Author(s):  
Hongmin Li ◽  
Guo-Xiang Wang ◽  
Edward A. Evans
Keyword(s):  
High Temperature ◽  
Numerical Analysis ◽  
Three Dimensional ◽  
Hydrothermal Growth ◽  
Chamber Wall ◽  
Heating Condition ◽  
Uniform Heating ◽  
Three Dimensional Flow ◽  
Growth Environment ◽  
Dimensional Flow

Hydrothermal growth is an important industrial process to produce piezoelectric crystals such as quartz. It takes place in a cylindrical container called an autoclave, which is filled with aqueous solution at a high temperature and a high pressure. The high temperature growth condition is maintained through electrical resistors on the outer surface of an autoclave. In practice there is a non-uniform heating condition in the circumferential direction. Many theoretical and numerical studies, however, assume an axisymmetric heating condition. This paper presents a numerical analysis of the three-dimensional heat transfer and fluid flow in hydrothermal growth due to such non-uniform heating. The analysis is based on an industry-size autoclave with an aspect ratio of 10. The non-uniform heating is introduced on the surface of both the lower dissolving chamber and the upper growing chamber of an autoclave with and without a baffle at the middle height. The flow and isotherm patterns were obtained with the temperature difference between the two chambers kept at 10 °C. The circumferentially non-uniform temperature has dramatic effects on the three-dimensional flow and therefore the temperature distribution in the autoclave. When the dissolving chamber is subjected to circumferentially non-uniform heating, a baffle is essential to create a uniform growth environment in the growing chamber. To obtain high quality single crystals, however, the temperature control on the growing chamber wall is more important than that on the dissolving chamber wall.

Sign in / Sign up

Export Citation Format

Share Document