The Critical Pressure at the Onset of Flame Instability of Syngas/Air/Diluent Outwardly Expanding Flame at Different Initial Temperatures and Pressures

2019 ◽  
Vol 141 (8) ◽  
Author(s):  
Ziyu Wang ◽  
Ziwei Bai ◽  
Guangying Yu ◽  
Sai Yelishala ◽  
Hameed Metghalchi
Keyword(s):  
High Speed ◽  
Critical Pressure ◽  
Hydrodynamic Instability ◽  
Experimental Studies ◽  
Initial Pressure ◽  
High Energy ◽  
Oxide Semiconductor ◽  
High Energy Density ◽  
Flame Instability ◽  
Wide Range

Syngas has gained attention recently due to its high energy density and environmentally friendly characteristics. Flame stability plays an important role in flame propagation in energy conversion devices. Experimental studies were performed in a cylindrical chamber to investigate flame instability of syngas/air/diluent mixture. A Z-shape Schlieren system coupled with a high-speed complementary metal–oxide–semiconductor camera was used to record flame pictures up to 40,000 frames per second. In this research, syngas is a mixture of hydrogen and carbon monoxide and diluent is a blend of 14% CO2 and 86% N2 with the same specific heat as the burned gases. Three main flame instabilities namely Rayleigh–Taylor (body force) instability, hydrodynamic instability, and thermal-diffusive instability have been studied. For the onset of flame instability, a power law correlation for the ratio of critical pressure to initial pressure of syngas/air/diluent flames over a wide range of initial temperatures (298–450 K), initial pressures (1.0–2.0 atm), equivalence ratios (0.6–3.0), diluent concentrations (0–10%), and hydrogen percentages (5–25%) in the fuel has been developed.

Microfabrication research at the National Submicron Facility

1983 ◽  
Vol 41 ◽  
pp. 86-89
Author(s):  
E.D. Wolf
Keyword(s):  
Integrated Circuits ◽  
Particle Physics ◽  
High Speed ◽  
New Technology ◽  
High Energy ◽  
High Energy Particle ◽  
New Science ◽  
Wide Range ◽  
Intermediate Domain ◽  
Circuit Function

Most microelectronics devices and circuits operate faster, consume less power, execute more functions and cost less per circuit function when the feature-sizes internal to the devices and circuits are made smaller. This is part of the stimulus for the Very High-Speed Integrated Circuits (VHSIC) program. There is also a need for smaller, more sensitive sensors in a wide range of disciplines that includes electrochemistry, neurophysiology and ultra-high pressure solid state research. There is often fundamental new science (and sometimes new technology) to be revealed (and used) when a basic parameter such as size is extended to new dimensions, as is evident at the two extremes of smallness and largeness, high energy particle physics and cosmology, respectively. However, there is also a very important intermediate domain of size that spans from the diameter of a small cluster of atoms up to near one micrometer which may also have just as profound effects on society as “big” physics.

Detector commissioning and development for PETRA-III

2010 ◽  
Vol 1 (SRMS-7) ◽  
Author(s):  
David Pennicard ◽  
Heinz Graafsma ◽  
Michael Lohmann
Keyword(s):  
High Speed ◽  
Materials Science ◽  
Dynamic Range ◽  
Photon Counting ◽  
High Energy ◽  
X Rays ◽  
Silicon Detectors ◽  
Time Resolved ◽  
Wide Range ◽  
Synchrotron Light

The new synchrotron light source PETRA-III produced its first beam last year. The extremely high brilliance of PETRA-III and the large energy range of many of its beamlines make it useful for a wide range of experiments, particularly in materials science. The detectors at PETRA-III will need to meet several requirements, such as operation across a wide dynamic range, high-speed readout and good quantum efficiency even at high photon energies. PETRA-III beamlines with lower photon energies will typically be equipped with photon-counting silicon detectors for two-dimensional detection and silicon drift detectors for spectroscopy and higher-energy beamlines will use scintillators coupled to cameras or photomultiplier tubes. Longer-term developments include ‘high-Z’ semiconductors for detecting high-energy X-rays, photon-counting readout chips with smaller pixels and higher frame rates and pixellated avalanche photodiodes for time-resolved experiments.

Temperature relaxation in strongly-coupled binary ionic mixtures

2021 ◽  
Author(s):  
Robert Sprenkle ◽  
Luciano Silvestri ◽  
M. S. Murillo ◽  
Scott Bergeson
Keyword(s):  
Material Properties ◽  
Inertial Confinement Fusion ◽  
Coulomb Systems ◽  
High Energy ◽  
High Energy Density ◽  
Inertial Confinement ◽  
Relaxation Rates ◽  
Strongly Coupled ◽  
Wide Range ◽  
Temperature Relaxation

Abstract New facilities such as the National Ignition Facility and the Linac Coherent Light Source have pushed the frontiers of high energy-density matter. These facilities offer unprecedented opportunities for exploring extreme states of matter, ranging from cryogenic solid-state systems to hot, dense plasmas, with applications to inertial-confinement fusion and astrophysics. However, significant gaps in our understanding of material properties in these rapidly evolving systems still persist. In particular, non-equilibrium transport properties of strongly-coupled Coulomb systems remain an open question. Here, we study ion-ion temperature relaxation in a binary mixture, exploiting a recently-developed dual-species ultracold neutral plasma. We compare measured relaxation rates with atomistic simulations and a range of popular theories. Our work validates the assumptions and capabilities of the simulations and invalidates theoretical models in this regime. This work illustrates an approach for precision determinations of detailed material properties in Coulomb mixtures across a wide range of conditions.

scholarly journals Metals and Alloys Additives as Enhancer for Rocket Propulsion: A Review

2021 ◽  
Vol 90 (1) ◽  
pp. 1-9
Author(s):  
Izham Izzat Ismail ◽  
Norhuda Hidayah Nordin ◽  
Muhammad Hanafi Azami ◽  
Nur Azam Abdullah
Keyword(s):  
Specific Impulse ◽  
Flame Temperature ◽  
High Energy ◽  
Combustion Efficiency ◽  
High Energy Density ◽  
Regression Rate ◽  
High Entropy ◽  
Rocket Propulsion ◽  
Wide Range ◽  
Metal Additives

A rocket's engine usually uses fuel and oxygen as propellants to increase the rocket's projection during launch. Nowadays, metallic ingredients are commonly used in the rocket’s operation to increase its performance. Metallic ingredients have a high energy density, flame temperature, and regression rate that are important factors in the propulsion process. There is a wide range of additives have been reported so far as catalysts for rocket propulsion. The studies show that the presence of metal additives improves the regression rate, specific impulse and combustion efficiency. Herein, the common energetic additives for rocket propulsion such as metal and light metals are reviewed. Besides the effect of these energetic particles on the regression behaviors of base (hybrid) fuel has been exclusively discussed. This paper also proposed a new alloy namely high entropy alloys (HEAs) as a new energetic additive that can potentially increase the performance of the rocket propellant system.

scholarly journals Metal-Water mixtures for Propulsion and Energy-Conversion Applications: Recent Progress and Future Directions

2018 ◽  
Vol 20 (1) ◽  
pp. 53 ◽  
Author(s):  
Dilip Sundaram
Keyword(s):  
Particle Size ◽  
Energy Conversion ◽  
Experimental Studies ◽  
High Energy ◽  
High Energy Density ◽  
Full Potential ◽  
Predictive Tool ◽  
Practical Applications ◽  
Relative Safety ◽  
Metal Water

The metal-water system is attractive for propulsion and energy-conversion applications. Of all metals, aluminum is attractive due to its high energy density, relative safety, and low cost. Experimental studies provide new insight on the combustion and propulsive behaviors. The burning rate is found to be a strong function of both pressure and particle size. Furthermore, there is a wide scatter in the measured pressure exponents due to differences in particle size, pressure, pH, and equivalence ratio. A major problem with Al/H2O mixtures is incomplete combustion and poor impulses, thereby rendering Al/H2O mixtures unsuitable for practical applications. Efforts to improve the performance of Al/H2O mixtures have only met with moderate success. Although experiments have revealed these new trends, not much is offered in terms of the underlying physics and mechanisms. To explore the combustion mechanisms, theoretical models based on energy balance analysis have been developed. These models involve numerous assumptions and many complexities were either ignored or treated simplistically. The model also relies on empirical inputs, which makes it more a useful guide than a predictive tool. Future works must endeavor to conduct a more rigorous analysis of metal-water combustion. Empirical inputs should be avoided and complexities must be properly treated to capture the essential physics of the problem. The model should help us properly understand the experimental trends, offer realistic predictions for unexplored conditions, and suggest guidelines and solutions in order to realize the full potential of metal-water mixtures.

Thermal Model of a Thin Film Pulsed Pyroelectric Generator

2016 ◽  
Author(s):  
Nicholas R. Jankowski ◽  
Andrew N. Smith ◽  
Brendan M. Hanrahan
Keyword(s):  
Thin Film ◽  
Power Generation ◽  
Energy Conversion ◽  
High Speed ◽  
High Energy ◽  
High Energy Density ◽  
Working Fluid ◽  
Film Material ◽  
Thermodynamic Cycles ◽  
The Impact

Recent high energy density thin film material development has led to an increased interest in pyroelectric energy conversion. Using state-of-the-art lead-zirconate-titanate piezoelectric films capable of withstanding high electric fields we previously demonstrated single cycle energy conversion densities of 4.28 J/cm3. While material improvement is ongoing, an equally challenging task involves developing the thermal and thermodynamic process though which we can harness this thermal-to-electric energy conversion capability. By coupling high speed thermal transients from pulsed heating with rapid charge and discharge cycles, there is potential for achieving high energy conversion efficiency. We briefly present thermodynamic equivalent models for pyroelectric power generation based on the traditional Brayton and Ericsson cycles, where temperature-pressure states in a working fluid are replaced by temperature-field states in a solid pyroelectric material. Net electrical work is then determined by integrating the path taken along the temperature dependent polarization curves for the material. From the thermodynamic cycles we identify the necessary cyclical thermal conditions to realize net power generation, including a figure of merit, rEC, or the electrocaloric ratio, to aid in guiding generator design. Additionally, lumped transient analytical heat transfer models of the pyroelectric system with pulsed thermal input have been developed to evaluate the impact of reservoir temperatures, cycle frequency, and heating power on cycle output. These models are used to compare the two thermodynamic cycles. This comparison shows that as with traditional thermal cycles the Ericsson cycle provides the potential for higher cycle work while the Brayton cycle can produce a higher output power at higher thermal efficiency. Additionally, limitations to implementation of a high-speed Ericsson cycle were identified, primarily tied to conflicts between the available temperature margin and the requirement for isothermal electrical charging and discharging.

Dielectric Elastomer Energy Harvesting and its Application to Human Walking

2011 ◽  
Author(s):  
Heather Lai ◽  
Chin An Tan ◽  
Yong Xu
Keyword(s):  
Energy Harvesting ◽  
Knee Joint ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
High Energy ◽  
Dielectric Elastomer ◽  
Metabolic Energy ◽  
High Energy Density ◽  
Human Walking ◽  
Wide Range

Human walking requires sophisticated coordination of muscles, tendons, and ligaments working together to provide a constantly changing combination of force, stiffness and damping. In particular, the human knee joint acts as a variable damper, dissipating greater amounts of energy when the knee undergoes large rotational displacements during walking, running or hopping. Typically, this damping results from the dissipation, or loss, of metabolic energy. It has been proven to be possible however; to collect this otherwise wasted energy through the use of electromechanical transducers of several different types which convert mechanical energy to electrical energy. When properly controlled, this type of device not only provides desirable structural damping effects, but the energy generated can be stored for use in a wide range of applications. A novel approach to an energy harvesting knee joint damper is presented using a dielectric elastomer (DE) smart material based electromechanical transducer. Dielectric elastomers are extremely elastic materials with high electrical permittivity which operate based on electrostatic effects. By placing compliant electrodes on either side of a dielectric elastomer film, a specialized capacitor is created, which couples mechanical and electrical energy using induced electrostatic stresses. Dielectric elastomer energy harvesting devices not only have a high energy density, but the material properties are similar to that of human tissue, making it highly suitable for wearable applications. A theoretical framework for dielectric elastomer energy harvesting is presented along with a mapping of the active phases of the energy harvesting to the appropriate phases of the walking stride. Experimental results demonstrating the energy harvesting capability of a DE generator undergoing strains similar to those experienced during walking are provided for the purpose of verifying the theoretical results. The work presented here can be applied to devices for use in rehabilitation of patients with muscular dysfunction and transfemoral prosthesis as well as energy generation for able-bodied wearers.

scholarly journals AWE experimental laser plasma program

2000 ◽  
Vol 18 (2) ◽  
pp. 213-218 ◽  
Author(s):  
M. DUNNE ◽  
J. EDWARDS ◽  
P. GRAHAM ◽  
A. EVANS ◽  
S. ROTHMAN ◽  
...  
Keyword(s):  
Equation Of State ◽  
Inertial Confinement Fusion ◽  
Fusion Energy ◽  
Strong Shock ◽  
High Energy ◽  
High Energy Density ◽  
Radiation Hydrodynamics ◽  
Inertial Confinement ◽  
X Ray ◽  
Wide Range

The achievement of ignition from an Inertial Confinement Fusion capsule will require a detailed understanding of a wide range of high energy density phenomena. This paper presents some recent work aimed at improving our knowledge of the strength and equation of state characteristics of low-Z materials, and outlines data which will provide quantitative benchmarks against which our predictive radiation hydrodynamics capabilities can be tested. Improvements to our understanding in these areas are required if reproducible and predictable fusion energy production is to be achieved on the next generation of laser facilities.In particular, the HELEN laser at AWE has been used to create a thermal X-ray source with 140 eV peak radiation temperature and 3% instantaneous flux uniformity to allow measurements of the Equation of State of materials at pressures up to 20 Mbar to an accuracy of <±2% in shock velocity. The same laser has been used to investigate the onset of spallation upon the release of a strong shock at a metal-vacuum boundary, with dynamic radiography used to image the spalled material in flight for the first time. Finally, a range of experiments have been performed to generate quantitative radiation hydrodynamics data on the evolution of gross target defects, driven in both planar and imploding geometry. X-ray radiography was used to record the evolving target deformation in a system where the X-ray drive and unperturbed target response were sufficiently characterized to permit meaningful analysis. The results have been compared to preshot predictions made using a wide variety of fluid codes, highlighting substantial differences between the various approaches, and indicating significant discrepancies with the experimental reality. The techniques developed to allow quantitative comparisons are allowing the causes of the discrepancies to be identified, and are guiding the development of new simulation techniques.

scholarly journals Nonaqueous redox-flow batteries: organic solvents, supporting electrolytes, and redox pairs

2015 ◽  
Vol 8 (12) ◽  
pp. 3515-3530 ◽  
Author(s):  
Ke Gong ◽  
Qianrong Fang ◽  
Shuang Gu ◽  
Sam Fong Yau Li ◽  
Yushan Yan
Keyword(s):  
Energy Density ◽  
Organic Solvents ◽  
Cell Voltage ◽  
High Energy ◽  
High Energy Density ◽  
Redox Flow Battery ◽  
High Cell ◽  
Redox Flow Batteries ◽  
Working Temperature ◽  
Wide Range

As members of the redox-flow battery (RFB) family, nonaqueous RFBs can offer a wide range of working temperature, high cell voltage, and potentially high energy density.

Sign in / Sign up

Export Citation Format

Share Document