Fatigue Life Prediction of Vortex Reducer Based on Stress Gradient

2019 ◽  
Vol 141 (3) ◽  
Author(s):  
Yanbin Luo ◽  
Yanrong Wang ◽  
Bo Zhong ◽  
Jiazhe Zhao ◽  
Xiaojie Zhang
Keyword(s):  
Fatigue Life ◽  
Size Effect ◽  
Stress Gradient ◽  
Fatigue Crack Initiation ◽  
High Stress ◽  
Stress Effect ◽  
Mean Stress ◽  
Notched Specimens ◽  
Life Model ◽  
The Mean

The effects of stress gradient and size effect on fatigue life are investigated based on the distribution of stress at the notch root of notched specimens of GH4169 alloy. The relationship between the life of notched specimens and smooth specimens is correlated by introducing the stress gradient impact coefficient, and a new life model of predicting notched specimens based on the Walker modification for the mean stress effect is established. In order to improve the prediction precision of life model with the equation parameters having a definite physical significance, the relationships among fatigue parameters, monotonic ultimate tensile strength, and reduction of area are established. Three-dimensional elastic finite element (FE) analysis of a vortex reducer is carried out to obtain the data of stress and strain for predicting its life. The results show that there is a high-stress gradient at the edge of the air holes of the vortex reducer, and it is thus a dangerous point for fatigue crack initiation. The prediction result of the vortex reducer is more reasonable if the mean stress, the stress gradient, and the size effect are considered comprehensively. The developed life model can reflect the effects of many factors well, especially the stress concentration. The life of notched specimens predicted by this model give a high estimation precision, and the prediction life data mainly fall into the scatter band of factor 2.

Fatigue Life Prediction of Vortex Reducer Based on Stress Gradient

2018 ◽  
Author(s):  
Yanbin Luo ◽  
Yanrong Wang ◽  
Bo Zhong ◽  
Jiazhe Zhao ◽  
Xiaojie Zhang
Keyword(s):  
Fatigue Life ◽  
Size Effect ◽  
Stress Gradient ◽  
Fatigue Crack Initiation ◽  
High Stress ◽  
Stress Effect ◽  
Mean Stress ◽  
Notched Specimens ◽  
Life Model ◽  
The Mean

The effects of stress gradient and size effect on fatigue life are investigated based on the distributions of stress at notch root of the notched specimens of GH4169 alloy. The relationship between the life of the notched specimens and the smooth specimens is correlated by introducing the stress gradient effect factor, and a new life model of predicting the notched specimens based on the Walker modification for the mean stress effect is established. In order to improve the prediction precision of life model with the equation parameters having a definite physical significance, the relationships among fatigue parameters, monotonic ultimate tensile strength and reduction of area are established. Three-dimensional elastic finite element (FE) analysis of a vortex reducer is carried out to obtain the data of stress and strain for predicting its life. The results show that there is a high-stress gradient at the edge of the air holes of the vortex reducer, and it is thus a dangerous point for fatigue crack initiation. The prediction result of the vortex reducer is more reasonable if the mean stress, stress gradient and size effect are considered comprehensively. The developed life model can reflect the effects of many factors well, especially the stress concentration. The life of the notched specimens predicted by this model give a high estimation precision, and the prediction life data mainly fall into the scatter band of factor 2.

Mean Stress Effect on Fatigue Properties of Type 316 Stainless Steel: Part II — In PWR Primary Water Environment

2017 ◽  
Author(s):  
Masayuki Kamaya
Keyword(s):  
Stainless Steel ◽  
Fatigue Life ◽  
Effective Strain ◽  
Strain Range ◽  
Stress Effect ◽  
Mean Stress ◽  
316 Stainless Steel ◽  
Mean Stress Effect ◽  
Primary Water ◽  
The Mean

The mean stress effect on the fatigue life of Type 316 stainless steel was investigated at 325°C in simulated PWR primary water. It was shown that, as shown in high-temperature air environment, the fatigue life was extended by applying the mean stress under the same stress amplitude. An increase in the maximum peak stress by applying the mean stress induced additional plastic strain and this hardened the material. On the other hand, the fatigue life was shortened by the mean stress for the same strain range. The ratcheting strain caused by applying mean stress accelerated crack mouth opening and reduced fatigue life. It was also shown that the fatigue life in the simulated PWR primary water was shorter than that in air even without the mean stress. The magnitude of the reduction depended on the strain range. The reduction in fatigue life was the maximum when the strain range was 0.6%. The environmental effect disappeared when the effective strain was less than 0.4%.

scholarly journals Fatigue Life Prediction of Rolling Bearings Based on Modified SWT Mean Stress Correction

2021 ◽  
Vol 34 (1) ◽  
Author(s):  
Aodi Yu ◽  
Hong-Zhong Huang ◽  
Yan-Feng Li ◽  
He Li ◽  
Ying Zeng
Keyword(s):  
Fatigue Life ◽  
Life Prediction ◽  
Sensitivity Coefficient ◽  
Fatigue Life Prediction ◽  
Stress Effect ◽  
Mean Stress ◽  
Rolling Bearings ◽  
Contact Loads ◽  
Compensation Factor ◽  
The Mean

AbstractThe existing engineering empirical life analysis models are not capable of considering the constitutive behavior of materials under contact loads; as a consequence, these methods may not be accurate to predict fatigue lives of rolling bearings. In addition, the contact stress of bearing in operation is cyclically pulsating, it also means that the bearing undergo non-symmetrical fatigue loadings. Since the mean stress has great effects on fatigue life, in this work, a novel fatigue life prediction model based on the modified SWT mean stress correction is proposed as a basis of which to estimate the fatigue life of rolling bearings, in which, takes sensitivity of materials and mean stress into account. A compensation factor is introduced to overcome the inaccurate predictions resulted from the Smith, Watson, and Topper (SWT) model that considers the mean stress effect and sensitivity while assuming the sensitivity coefficient of all materials to be 0.5. Moreover, the validation of the model is finalized by several practical experimental data and the comparison to the conventional SWT model. The results show the better performance of the proposed model, especially in the accuracy than the existing SWT model. This research will shed light on a new direction for predicting the fatigue life of rolling bearings.

Mean Stress Effect on Fatigue Properties of Type 316 Stainless Steel in Pressurized Water Reactors Primary Water Environment

2019 ◽  
Vol 141 (5) ◽  
Author(s):  
Masayuki Kamaya
Keyword(s):  
Stainless Steel ◽  
Fatigue Life ◽  
Water Environment ◽  
Stress Effect ◽  
Mean Stress ◽  
Pressurized Water ◽  
316 Stainless Steel ◽  
Mean Stress Effect ◽  
Primary Water ◽  
The Mean

The mean stress effect on the fatigue life of type 316 stainless steel was investigated in simulated pressurized water reactor (PWR) primary water and air at 325 °C. The tests in air environment have revealed that the fatigue life was increased with application of the positive mean stress for the same stress amplitude because the strain range was decreased by hardening of material caused by increased maximum peak stress. On the other hand, it has been shown that the fatigue life obtained in simulated PWR primary water was decreased compared with that obtained in air environment even without the mean stress. In this study, type 316 stainless steel specimens were subjected to the fatigue test with and without application of the positive mean stress in high-temperature air and PWR water environments. First, the mean stress effect was discussed for high-temperature air environment. Then, the change in fatigue life in the PWR water environment was evaluated. It was revealed that the change in the fatigue life due to application of the mean stress in the PWR water environment could be explained in the same way as for the air environment. No additional factor was induced by applying the mean stress in the PWR water environment.

Mean Stress Correction for Fatigue Life of Carbon Steel: Proposal of Non-Closure Model

2019 ◽  
Author(s):  
Masayuki Kamaya
Keyword(s):  
Fatigue Life ◽  
Carbon Steel ◽  
Crack Growth ◽  
Stress Amplitude ◽  
Strain Range ◽  
Stress Effect ◽  
Mean Stress ◽  
Crack Mouth ◽  
Closure Model ◽  
The Mean

Abstract Influence of the mean stress on fatigue life was investigated for carbon steel. Uni-axial fatigue tests were conducted by stress and strain-controlled conditions at room temperature. The fatigue life was reduced by applying the mean stress for the same stress amplitude. The fatigue life exhibited better correlation with the strain range rather than the stress amplitude. Increase in strain range caused by applying the mean stress correlated well with the decrease in the fatigue life. It was assumed that the mean stress effect on the fatigue life was brought about by the change in crack growth rate caused by applying the mean stress. The mean stress enhanced crack mouth opening and accelerated the crack growth. The non-closure model, in which the crack mouth is assumed not to be closed even at the minimum peak stress, was proposed.

scholarly journals Application of the S-N Curve Mean Stress Correction Model in Terms of Fatigue Life Estimation for Random Torsional Loading for Selected Aluminum Alloys

Materials ◽  
2020 ◽  
Vol 13 (13) ◽  
pp. 2985
Author(s):  
Michał Böhm ◽  
Krzysztof Kluger ◽  
Sławomir Pochwała ◽  
Mariusz Kupina
Keyword(s):  
Fatigue Life ◽  
Fatigue Strength ◽  
Stress Effect ◽  
Mean Stress ◽  
Torsional Loading ◽  
Correction Model ◽  
Life Estimation ◽  
Mean Stress Effect ◽  
Fatigue Life Estimation ◽  
The Mean

The paper presents the experimental fatigue test results for cyclic constant amplitude loading conditions for the case of the torsion of the PA4 (AW-6082-T6), PA6 (AW-2017A-T4) and PA7 (AW-2024-T3) aluminum alloy for a drilled diabolo type test specimen. The tests have been performed for the stress asymmetry ratios R = −1, R = −0.7, R = −0.5 and R = −0.3. The experimental results have been used in the process of a fatigue life estimation performed for a random generated narrowband stress signal with a zero and a non-zero global mean stress value. The calculations have been performed within the time domain with the use of the rainflow cycle counting method and the Palmgren−Miner damage hypothesis. The mean stress compensation has been performed with the S-N curve mean stress model proposed by Niesłony and Böhm. The model has been modified in terms of torsional loading conditions. In order to obtain an appropriate R = 0 ratio S-N curve fatigue strength amplitude, the Smith−Watson−Topper model was used and compared with literature fatigue strength amplitudes. The presented solution extends the use of the correction model in terms of the torsional loading condition in order to obtain new S-N curves for other R values on the basis of the R = −1 results. The work includes the computational results for new fatigue curves with and without the mean stress effect correction. The results of the computations show that the mean stress effect plays a major role in the fatigue life assessment of the tested aluminum alloys and that the method can be used to assess the fatigue life under random conditions.

scholarly journals Mean Stress Effect on the Fatigue Life of 304L Austenitic Steel in Air and PWR Environments Determined with Strain- and Load-Controlled Experiments

Metals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 221 ◽  
Author(s):  
Philippe Spätig ◽  
Jean-Christophe Le Roux ◽  
Matthias Bruchhausen ◽  
Kevin Mottershead
Keyword(s):  
Fatigue Life ◽  
Austenitic Steel ◽  
Strain Amplitude ◽  
Synergistic Effects ◽  
Stress Effect ◽  
Mean Stress ◽  
Controlled Experiments ◽  
Pressurized Water ◽  
Mean Stress Effect ◽  
The Mean

The mean stress effect on the fatigue life of 304L austenitic steel was evaluated at 300 °C in air and pressurized water reactor (PWR) environments. Uniaxial tests were performed in strain-control and load-control modes, with zero mean stress and a positive mean stress of 50 MPa. A specific procedure was used for the strain-controlled experiments to maintain the strain amplitude and mean stress constant. The strain-controlled data indicate that the application of positive mean stress decreases the fatigue life for a given strain amplitude in air and PWR environments. The data also show that the life reduction is independent of the environments, suggesting that no synergistic effects between the mean stress and the LWR environment occur. The load-controlled experiments confirm that the application of positive mean stress increases fatigue due to cyclic hardening processes. This observation is much less pronounced in the PWR environment. All data were analyzed using the Smith–Watson–Topper (SWT) stress–strain function, which was shown to correlate well with all strain- and load-controlled data with and without mean stress in each environment. In the SWT–life curve representation, the life reduction in the PWR environment was found fully consistent with the NUREG-CR6909 predictions.

Mean Stress Correction of S45C Carbon Steel Based on Crack Growth Concept

2020 ◽  
Author(s):  
Masayuki Kamaya
Keyword(s):  
Fatigue Life ◽  
Carbon Steel ◽  
Crack Growth ◽  
Fatigue Limit ◽  
Stress Amplitude ◽  
Strain Range ◽  
Good Prediction ◽  
Stress Effect ◽  
Mean Stress ◽  
The Mean

Abstract Influence of the mean stress on fatigue life and fatigue limit was investigated for carbon steel. Uni-axial fatigue tests were conducted under stress and strain-controlled conditions at room temperature. The fatigue life and fatigue limit were reduced by applying the mean stress for the same stress amplitude. The fatigue life exhibited a better correlation with the strain range than the stress amplitude did. Increase in strain range caused by applying the mean stress correlated well with the decrease in the fatigue life. It was assumed that the mean stress effect on the fatigue life was brought about by the change in crack growth rate caused by applying the mean stress. The mean stress enhanced crack mouth opening and accelerated the crack growth. The reduction in the fatigue limit was also brought about by the same effect. It was shown that the effective strain range gave good prediction of fatigue life and fatigue limit with and without the mean stress.

scholarly journals The effect of mean stress on the fatigue behaviour of overhead conductor function of the H/w parameter

2018 ◽  
Vol 165 ◽  
pp. 11001
Author(s):  
Remy Badibanga ◽  
Thiago Miranda ◽  
Pedro Rocha ◽  
Jorge Ferreira ◽  
Cosme da Silva ◽  
...  
Keyword(s):  
Fatigue Life ◽  
Fatigue Behaviour ◽  
Fatigue Tests ◽  
Experimental Results ◽  
Stress Effect ◽  
Mean Stress ◽  
Stress Effects ◽  
Mean Stress Effect ◽  
The Mean

The objective of this work is to evaluate the effects of mean stress on the fatigue behaviour of an All Aluminium Conductor (AAC Orchid), Aluminium Conductor Steel Reinforced (ACSR Tern), and an Aluminium Conductor Alloy Reinforced (ACAR 750 MCM). In this sense, 72 fatigue tests on overhead conductors were performed using different values of H/w parameter. Based on the experimental results, the parameters which describe the fatigue behaviour of the conductors were determined after generating theirs S-N curves. In the assessment of the mean stress effects on the fatigue life, Goodman and Gerber’s relations were fitted to evaluate the use of such models for the conductors. It was observed that the evaluation of the mean stress effect on the overhead conductor could be made by using the fatigue relations.

Sign in / Sign up

Export Citation Format

Share Document