Large Eddy Simulation of Boundary Layer Transition Mechanisms in a Gas-Turbine Compressor Cascade

2019 ◽  
Vol 141 (6) ◽  
Author(s):  
Ashley D. Scillitoe ◽  
Paul G. Tucker ◽  
Paolo Adami
Keyword(s):  
Boundary Layer ◽  
Large Eddy Simulation ◽  
Boundary Layer Transition ◽  
Bypass Transition ◽  
Suction Surface ◽  
Layer Transition ◽  
Turbulent Spots ◽  
Pressure Surface ◽  
Eddy Simulation ◽  
Large Eddy

Large eddy simulation (LES) is used to explore the boundary layer transition mechanisms in two rectilinear compressor cascades. To reduce numerical dissipation, a novel locally adaptive smoothing (LAS) scheme is added to an unstructured finite volume solver. The performance of a number of subgrid scale (SGS) models is explored. With the first cascade, numerical results at two different freestream turbulence intensities (Ti's), 3.25% and 10%, are compared. At both Ti's, time-averaged skin-friction and pressure coefficient distributions agree well with previous direct numerical simulations (DNS). At Ti = 3.25%, separation-induced transition occurs on the suction surface, while it is bypassed on the pressure surface. The pressure surface transition is dominated by modes originating from the convection of Tollmien–Schlichting waves by Klebanoff streaks. However, they do not resemble a classical bypass transition. Instead, they display characteristics of the “overlap” and “inner” transition modes observed in the previous DNS. At Ti = 10%, classical bypass transition occurs, with Klebanoff streaks incepting turbulent spots. With the second cascade, the influence of unsteady wakes on transition is examined. Wake-amplified Klebanoff streaks were found to instigate turbulent spots, which periodically shorten the suction surface separation bubble. The celerity line corresponding to 70% of the free-stream velocity, which is associated with the convection speed of the amplified Klebanoff streaks, was found to be important.

Large Eddy Simulation of Boundary Layer Transition Mechanisms in a Gas-Turbine Compressor Cascade

2018 ◽  
Author(s):  
Ashley D. Scillitoe ◽  
Paul G. Tucker ◽  
Paolo Adami
Keyword(s):  
Boundary Layer ◽  
Large Eddy Simulation ◽  
Boundary Layer Transition ◽  
Bypass Transition ◽  
Suction Surface ◽  
Layer Transition ◽  
Turbulent Spots ◽  
Pressure Surface ◽  
Eddy Simulation ◽  
Large Eddy

Large Eddy Simulation (LES) is used to explore the boundary layer transition mechanisms in two rectilinear compressor cascades. To reduce numerical dissipation, a novel locally adaptive smoothing scheme is added to an unstructured finite-volume solver. The performance of a number of Sub-Grid Scale (SGS) models is explored. With the first cascade, numerical results at two different freestream turbulence intensities (Ti’s), 3.25% and 10%, are compared. At both Ti’s, time-averaged skin-friction and pressure coefficient distributions agree well with previous Direct Numerical Simulations (DNS). At Ti = 3.25%, separation induced transition occurs on the suction surface, whilst it is bypassed on the pressure surface. The pressure surface transition is dominated by modes originating from the convection of Tollmien-Schlichting waves by Klebanoff streaks. However, they do not resembled a classical bypass transition. Instead, they display characteristics of the “overlap” and “inner” transition modes observed in the previous DNS. At Ti = 10%, classical bypass transition occurs, with Klebanoff streaks incepting turbulent spots. With the second cascade, the influence of unsteady wakes on transition is examined. Wake-amplified Klebanoff streaks were found to instigate turbulent spots, which periodically shorten the suction surface separation bubble. The celerity line corresponding to 70% of the free-stream velocity, which is associated with the convection speed of the amplified Klebanoff streaks, was found to be important.

Large Eddy Simulation of Bypass Transition in Vane Passage With Freestream Turbulence

2020 ◽  
Vol 142 (6) ◽  
Author(s):  
Yousef Kanani ◽  
Sumanta Acharya ◽  
Forrest Ames
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Large Eddy Simulation ◽  
Bypass Transition ◽  
Freestream Turbulence ◽  
Turbulent Spot ◽  
Suction Surface ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Inflow Turbulence

Abstract High Reynolds flow over a nozzle guide-vane with elevated inflow turbulence was simulated using wall-resolved large eddy simulation (LES). The simulations were undertaken at an exit Reynolds number of 0.5 × 106 and inflow turbulence levels of 0.7% and 7.9% and for uniform heat-flux boundary conditions corresponding to the measurements of Varty and Ames (2016, “Experimental Heat Transfer Distributions Over an Aft Loaded Vane With a Large Leading Edge at Very High Turbulence Levels,” ASME Paper No. IMECE2016-67029). The predicted heat transfer distribution over the vane is in excellent agreement with measurements. At higher freestream turbulence, the simulations accurately capture the laminar heat transfer augmentation on the pressure surface and the transition to turbulence on the suction surface. The bypass transition on the suction surface is preceded by boundary layer streaks formed under the external forcing of freestream disturbances which breakdown to turbulence through inner-mode secondary instabilities. Underneath the locally formed turbulent spot, heat transfer coefficient spikes and generally follows the same pattern as the turbulent spot. The details of the flow and temperature fields on the suction side are characterized, and first- and second-order statistics are documented. The turbulent Prandtl number in the boundary layer is generally in the range of 0.7–1, but decays rapidly near the wall.

Large Eddy Simulation of Bypass Transition in Vane Passage With Freestream Turbulence

2019 ◽  
Author(s):  
Yousef Kanani ◽  
Sumanta Acharya ◽  
Forrest Ames
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Large Eddy Simulation ◽  
Bypass Transition ◽  
Freestream Turbulence ◽  
Turbulent Spot ◽  
Suction Surface ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Inflow Turbulence

Abstract High Reynolds flow over a nozzle guide-vane with elevated inflow turbulence was simulated using wall-resolved large eddy simulation (LES). The simulations were undertaken at an exit Reynolds number of 0.5×106 and inflow turbulence levels of 0.7% and 7.9% and for uniform heat-flux boundary conditions corresponding to the measurements of (Varty, J. W., and Ames, F. E., 2016, ASME Paper No. IMECE2016-67029). The predicted heat transfer distribution over the vane is in excellent agreement with measurements. At higher freestream turbulence, the simulations accurately capture the laminar heat transfer augmentation on the pressure surface and the transition to turbulence on the suction surface. The bypass transition on the suction surface is preceded by boundary layer streaks formed under the external forcing of freestream disturbances which breakdown to turbulence through inner mode secondary instabilities. Underneath the locally formed turbulent spot, heat transfer coefficient spikes and generally follows the same pattern as the turbulent spot. The details of the flow and temperature fields on the suction side are characterized and first and second order statistics are documented. The turbulent Prandtl number in the boundary layer is generally in the range of 0.7–1, but decays rapidly near the wall.

scholarly journals Large Eddy Simulation of boundary layer transition over an isolated ramp-type micro roughness element

2019 ◽  
Vol 80 ◽  
pp. 108492
Author(s):  
Hatim Belkhou ◽  
Serge Russeil ◽  
Talib Dbouk ◽  
Mohammed Mobtil ◽  
Daniel Bougeard ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Large Eddy Simulation ◽  
Roughness Element ◽  
Boundary Layer Transition ◽  
Layer Transition ◽  
Eddy Simulation ◽  
Large Eddy
Sign in / Sign up

Export Citation Format

Share Document