Characterization of New Nonstoichiometric Ferroelectric (Li0.95Cu0.15)Ta0.76Nb0.19O3 and Comparative Study With (Li0.95Cu0.15)Ta0.57Nb0.38O3 as Photocatalysts in Microbial Fuel Cells

2018 ◽  
Vol 16 (2) ◽  
Author(s):  
S. Louki ◽  
N. Touach ◽  
A. Benzaouak ◽  
V. M. Ortiz-Martínez ◽  
M. J. Salar-García ◽  
...  
Keyword(s):  
Power Density ◽  
Microbial Fuel Cells ◽  
Removal Rate ◽  
Oxygen Demand ◽  
Ferroelectric Material ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Uv Visible

This work investigates the photocatalytic activity of new ferroelectric material with formula (Li0.95Cu0.15)Ta0.76Nb0.19O3 (LT76) in a single chamber microbial fuel cell (MFC) and compares its performance with the similar photocatalyst (Li0.95Cu0.15)Ta0.57Nb0.38O3 (LT57). The photocatalysts LT76 and LT57 were synthesized by ceramic route under the same conditions, with the same starting materials. The ratio Ta/Nb was fixed at 4.0 and 1.5 for LT76 and LT57, respectively. These phases were characterized by different techniques including X-ray diffraction (XRD), transmission electronic microscopy (TEM), particle size distribution (PSD), differential scanning calorimetry (DSC), and ultraviolet (UV)–visible (Vis). The new photocatalyst LT76 presents specific surface area of 0.791 m2/g and Curie temperature of 1197 °C. The photocatalytic efficiency of this material is assessed in terms of wastewater treatment and electricity generation by power density and removal rate of chemical oxygen demand (COD) in the presence of a light source. The values of maximum power density and COD removal were 19.77 mW/m3 and 93%, respectively, for LT76.

scholarly journals Preparation and Characterization of Photoactive Anatase TiO2 from Algae Bloomed Surface Water

Catalysts ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 452 ◽  
Author(s):  
Sayed Mukit Hossain ◽  
Heeju Park ◽  
Hui-Ju Kang ◽  
Jong Beom Kim ◽  
Leonard Tijing ◽  
...  
Keyword(s):  
Removal Rate ◽  
Anatase Phase ◽  
Oxygen Demand ◽  
Xrd Analysis ◽  
Anatase Tio2 ◽  
X Ray Diffraction ◽  
X Ray ◽  
Uv Irradiance ◽  
Mixed Mortar

The purpose of the study was to effectively treat algae bloomed water while using a Ti-based coagulant (TiCl4) and recover photoactive novel anatase TiO2 from the flocculated sludge. Conventional jar tests were conducted in order to evaluate the coagulation efficiency, and TiCl4 was found superior compared to commercially available poly aluminum chloride (PAC). At a dose of 0.3 g Ti/L, the removal rate of turbidity, chemical oxygen demand (COD), and total phosphorus (TP) were measured as 99.8%, 66.7%, and 96.9%, respectively. Besides, TiO2 nanoparticles (NPs) were recovered from the flocculated sludge and scanning electron microscope (SEM), energy dispersive X-ray spectroscope (EDX), and X-ray diffraction (XRD) analysis confirmed the presence of only anatase phase. The recovered TiO2 was found to be effective in removing gaseous CH3CHO and NOx under UV-A lamp at a light intensity of 10 W/m2. Additionally, the TiO2 mixed mortar blocks that were prepared in this study successfully removed atmospheric nitrogen oxide (NOx) under UV irradiance. This study is one of the first to prepare anatase TiO2 from flocculated algal sludge and it showed promising results. Further research on this novel TiO2 concerning internal chemical bonds and shift in the absorbance spectrum could explore several practical implications.

Synthesis and characterization of 1,4-diazophenylenebridged Cu-phthalocyanine polymer

e-Polymers ◽  
2004 ◽  
Vol 4 (1) ◽  
Author(s):  
Cemil Alkan ◽  
Leyla Aras ◽  
Güngör Gündüz
Keyword(s):  
Electrical Conductivity ◽  
Diazonium Salt ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Visible Spectroscopy ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Uv Visible ◽  
Soluble Part

Abstract A novel type of phthalocyanine polymer, 1,4-diazophenylene-bridged Cuphthalocyanine, was prepared from the diazonium salt of diaminobenzene and Cu(II) 1,8,15,22-tetraaminophthalocyanine. The polymer is partially soluble in tetrahydrofuran, dichloromethane, and dimethylformamide. Characterization of the polymer was performed by IR and UV-visible spectroscopy, X-ray diffraction, ash analysis, viscometry, differential scanning calorimetry and thermogravimetric analysis. The molecular weight of the soluble part of the polymer was determined by ebullioscopy. Electrical conductivity of the polymer and its doped samples were determined by the 4-probe technique. It was found that the electrical conductivity increased up to 10-4 S/cm after doping. The redox behaviour of the polymer was investigated utilizing cyclic voltammetry.

Studies on the Preparation, Characterization and Solubility of -Cyclodextrin-Roxythromycin Inclusion Complexes

2009 ◽  
Vol 2 (2) ◽  
pp. 523-530
Author(s):  
D. Nagasamy Venkatesh ◽  
S. Karthick ◽  
M. Umesh ◽  
G. Vivek ◽  
R.M. Valliappan ◽  
...  
Keyword(s):  
Dissolution Rate ◽  
Inclusion Complexes ◽  
Phase Solubility ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Ir Studies ◽  
Poorly Soluble ◽  
Poorly Soluble Drug

Roxythromycin/ β-cyclodextrin (Roxy/ β-CD) dispersions were prepared with a view to study the influence of β-CD on the solubility and dissolution rate of this poorly soluble drug. Phase-solubility profile indicated that the solubility of roxythromycin was significantly increased in the presence of β-cyclodextrin and was classified as AL-type, indicating the 1:1 stoichiometric inclusion complexes. Physical characterization of the prepared systems was carried out by differential scanning calorimetry (DSC), X-ray diffraction studies (XRD) and IR studies. Solid state characterization of the drug β-CD binary system using XRD, FTIR and DSC revealed distinct loss of drug crystallinity in the formulation, ostensibly accounting for enhancement of dissolution rate.

scholarly journals Stacking Control by Molecular Symmetry of Sterically Protected Phthalocyanines

Molecules ◽  
2020 ◽  
Vol 25 (23) ◽  
pp. 5552
Author(s):  
Ryota Kudo ◽  
Masahiro Sonobe ◽  
Yoshiaki Chino ◽  
Yu Kitazawa ◽  
Mutsumi Kimura
Keyword(s):  
Lamellar Structure ◽  
Synthesis And Characterization ◽  
Molecular Symmetry ◽  
X Ray Diffraction ◽  
Melting Points ◽  
Scanning Calorimetry ◽  
Structural Isomers ◽  
X Ray ◽  
Temperature Controlled

The synthesis and characterization of two phthalocyanine (Pc) structural isomers, 1 and 2, in which four 2,6-di(hexyloxy)phenyl units were attached directly to the 1,8,15,22- or 1,4,15,18-positions of the Pc rings, are described. Both Pcs 1 and 2 exhibited low melting points, i.e., 120 and 130 °C respectively, due to the reduction in intermolecular π-π interaction among the Pc rings caused by the steric hindrance of 2,6-dihexyloxybenzene units. The thermal behaviors were investigated with temperature-controlled polarizing optical microscopy, differential scanning calorimetry, powder X-ray diffraction, and absorption spectral analyses. Pc 1, having C4h molecular symmetry, organized into a lamellar structure containing lateral assemblies of Pc rings. In contrast, the other Pc 2 revealed the formation of metastable crystalline phases, including disordered stacks of Pcs due to rapid cooling from a melted liquid.

scholarly journals Characterization of the Interface Between the Bulk Glass Forming Alloy Zr41Ti14Cu12Ni10Be23 with Pure Metals and Ceramics

2000 ◽  
Vol 15 (7) ◽  
pp. 1617-1621 ◽  
Author(s):  
Jan Schroers ◽  
Konrad Samwer ◽  
Frigyes Szuecs ◽  
William L. Johnson
Keyword(s):  
Sessile Drop ◽  
Bulk Glass ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Glass Forming ◽  
Processing Times ◽  
Thermal Stability Of

The reaction of the bulk glass forming alloy Zr41Ti14Cu12Ni10Be23 (Vit 1) with W, Ta, Mo, AlN, Al2O3, Si, graphite, and amorphous carbon was investigated. Vit 1 samples were melted and subsequently solidified after different processing times on discs of the different materials. Sessile drop examinations of the macroscopic wetting of Vit 1 on the discs as a function of temperature were carried out in situ with a digital optical camera. The reactions at the interfaces between the Vit 1 sample and the different disc materials were investigated with an electron microprobe. The structure and thermal stability of the processed Vit 1 samples were examined by x-ray diffraction and differential scanning calorimetry. The results are discussed in terms of possible applications for composite materials.

The Synthesis and Characterization of Oxide Free Tin Nanoparticles

2014 ◽  
Vol 670-671 ◽  
pp. 26-29
Author(s):  
Zhi Long Pan ◽  
Shi Liang Ao ◽  
Jian Ping Jia
Keyword(s):  
Reduction Method ◽  
Chemical Reduction ◽  
Thermal Characterization ◽  
X Ray Diffraction ◽  
Chemical Reduction Method ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Xrd Study ◽  
Tin Nanoparticles

Oxide free Tin nanoparticles were synthesized from a chemical reduction method. Their morphological and thermal characterizations were studied in this paper. The X-ray diffraction (XRD) study showed that no oxides of Tin nanoparticles were formed. The thermal characterization by differential scanning calorimetry (DSC) exhibited the size dependency of the melting points. The melting point was as low as 202.16°C.

Synthesis and Electrochemistry of Aluminum Porphycenes: Crystal and Molecular Structure of Methyl-σ-Bonded Aluminum Etioporphycene

1997 ◽  
Vol 01 (02) ◽  
pp. 109-119 ◽  
Author(s):  
ROGER GUILARD ◽  
VIRGINIE PICHON-PESME ◽  
HASSANE LACHEKAR ◽  
CLAUDE LECOMTE ◽  
ALLY M. AUKAULOO ◽  
...  
Keyword(s):  
Molecular Structure ◽  
Crystal And Molecular Structure ◽  
Structural Data ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
H Nmr ◽  
Axial Ligands ◽  
Uv Visible

The synthesis and characterization of three monomeric aluminum porphycenes with anionic or σ-bonded axial ligands is reported. The investigated compounds are represented as ( EtioPc ) Al ( CH 3) and ( EtioPc ) AlX where EtioPc represents the dianion of etioporphycene and X = Cl − or OH −. Each synthesized complex was characterized by mass spectrometry. 1 H NMR, IR and UV-visible spectroscopies as well as by electrochemistry. Comparisons are made between the properties of complexes in the aluminum etioporphycene series and related chloro- or methyl σ-bonded Al ( III ) porphyrins containing octaethylporphyrin ( OEP ) or tetraphenylporphyrin ( TPP ) macrocycles. Comparisons are also made between the currently investigated compounds and a previously reported Al ( III ) μ-oxo dimer, [( EtioPc ) Al ]2 O . In addition, the crystal and molecular structure of ( EtioPc ) Al ( CH 3) was determined by X-ray diffraction. The molecular structure of this methyl-σ-bonded aluminum etioporphycene provides the first structural data for an aluminum porphycene compound. The aluminum(III) atom in ( EtioPc ) Al ( CH 3) is pentacoordinated and is located 0.54 Å from the plane of the four N -nitrogens.

Preparation and Characterization of PCL/PVP Blend Membrane

2011 ◽  
Vol 311-313 ◽  
pp. 1638-1641
Author(s):  
Jun Hua Wang ◽  
Xiang Biao Cheng ◽  
Gang Huang ◽  
Feng Chun Dong ◽  
Yong Tang Jia
Keyword(s):  
Mechanical Property ◽  
Membrane Structure ◽  
Solution Method ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Blend Membrane ◽  
X Ray ◽  
Structure And Morphology ◽  
Xrd Techniques

PCL/PVP blend membrane was prepared by casting solution method. Scanning electron microscopy (SEM), diffraction scanning calorimetry (DSC), and X-ray diffraction (XRD) techniques were employed to characterize membrane structure and morphology. Moreover, the hydrophilicity, mechanical property and biodegradability of membranes were investigated. Due to introducing PVP, the crystallinity and mechanical property of PCL altered to some extent. The hydrophilicity of the blend membrane improved remarkably with increasing PVP content, which was expressed by the contact angle declining and the rate of water absorption increasing. Lipase accelerated the degradation rate of PCL/PVP membrane.

In Situ Polymerization and Characterization of Poly(ε-caprolactone)/Layered Double Hydroxide Nanocomposites

2012 ◽  
Vol 557-559 ◽  
pp. 371-374
Author(s):  
Lian Liu ◽  
Teng Yu ◽  
Pei Wang ◽  
Guang Shuo Wang
Keyword(s):  
Layered Double Hydroxide ◽  
In Situ Polymerization ◽  
X Ray Diffraction ◽  
Visible Spectroscopy ◽  
X Ray ◽  
Uv Visible ◽  
Absorbance Peak ◽  
Double Hydroxide

Nanocomposites of poly(ε-caprolactone) (PCL) and layered double hydroxide (LDH) were prepared by in situ polymerization at low LDHs loadings in this work. The resultants were characterized by FTIR spectroscopy, X-ray diffraction (XRD), differential scanning calorimeter (DSC) and UV-visible spectroscopy (UV-vis). FTIR showed that the PCL/LDHs nanocomposites were prepared successfully by in situ polymerization and XRD spectra showed that the crystal structure did not change greatly in the presence of LDHS. DSC results confirmed that LDHs could act as nucleating agents. UV-vis spectra showed that LDHs had stronger absorbance peak than LDH. Moreover, the PCL/LDHs nanocomposites had strong anti-ultraviolet effect by introduction of LDHs into polymer matrix.

Efficient visible-light photocatalytic degradation of sulfadiazine sodium with hierarchical Bi7O9I3 under solar irradiation

2015 ◽  
Vol 72 (12) ◽  
pp. 2122-2131 ◽  
Author(s):  
MengMeng Xu ◽  
YaLei Zhao ◽  
QiShe Yan
Keyword(s):  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Oxygen Demand ◽  
Solar Irradiation ◽  
X Ray Diffraction ◽  
X Ray ◽  
Optical Test ◽  
Different Seasons ◽  
Uv Visible ◽  
The Difference

Bi7O9I3, a kind of visible-light-responsive photocatalyst, with hierarchical micro/nano-architecture was successfully synthesized by oil-bath heating method, with ethylene glycol as solvent, and applied to degrade sulfonamide antibiotics. The as-prepared product was characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV-visible diffuse reflection spectra and scanning electron microscopy (SEM). XRD and XPS tests confirmed that the product was indeed Bi7O9I3. The result of SEM observation shows that the as-synthesized Bi7O9I3 consists of a large number of micro-sheets with parallel rectangle structure. The optical test exhibited strong photoabsorption in visible light irradiation, with 617 nm of absorption edges. Moreover, the difference in the photocatalytic efficiency of as-prepared Bi7O9I3 at different seasons of a whole year was investigated in this study. The chemical oxygen demand removal efficiency and concentration of NO3− and SO42– of solution after reaction were also researched to confirm whether degradation of the pollutant was complete; the results indicated a high mineralization capacity of Bi7O9I3. The as-synthesized Bi7O9I3 exhibits an excellent oxidizing capacity of sulfadiazine sodium and favorable stability during the photocatalytic reaction.

Sign in / Sign up

Export Citation Format

Share Document