Drillstring Failure—Identification, Modeling, and Experimental Characterization

2019 ◽  
Vol 5 (2) ◽  
Author(s):  
Jamil Abdo ◽  
Edris M. Hassan ◽  
Khaled Boulbrachene ◽  
Jan C. T. Kwak
Keyword(s):  
Torsional Vibration ◽  
Oil And Gas ◽  
Drill Pipe ◽  
Oil And Gas Industry ◽  
Design Parameters ◽  
Experimental Investigations ◽  
Torsional Vibrations ◽  
Stick Slip ◽  
Coupling Equations ◽  
The Impact

Drilling is one of the costliest and risky activities in oil and gas industry due to complexity of interactions with downhole formation. Under such conditions, the uncertainty of drillstring behavior increases, and hence, it becomes difficult to predict the causes, occurrences, and types of failures. Lateral and torsional vibrations often cause failure of bottom hole assembly (BHA), drillstring failure, drill bit, and wall borehole damages. In this work, a model is presented to determine the impact of lateral and torsional vibrations on a drillstring during the drilling operation. The model aims to mimic real drillstring behavior inside a wellbore with regards to its dynamic movements due to multiple real situations such as eccentricity of collars, drill pipe sections, and stick-slip phenomena occurring due to the interaction of the bit and the drillstring with the well formation. The work aims to develop a basis for determining critical operating speeds and design parameters to provide safe drilling procedures and reduce drillstring fatigue failure. Lagrangian approach is used in this study to attain drillstring lateral and torsional vibration coupling equations. The nonlinear equations are solved numerically to obtain the response of the system. In this work, we also present a brief description of an in-house constructed experimental setup. The setup has the capability to imitate the downhole lateral and torsional vibration modes. Parameters from the experimental investigations are incorporated for validation of the mathematical models and for prediction of the drillstring fatigue life. Such investigations are essential for oil/gas industries as they provide solutions as well as recommendations about operating speed, lateral and torsional amplitudes measurements and corrections, and the conditions for avoiding occurrence of natural frequency(ies) of the system.

scholarly journals Drillstring Failure: Analytical and Experimental Approach

2019 ◽  
Vol 300 ◽  
pp. 04004
Author(s):  
Edris Hassan ◽  
Jamil Abdo ◽  
Jan Kwak ◽  
Abdullah Al Shabibi
Keyword(s):  
Torsional Vibration ◽  
Oil And Gas ◽  
Drill Pipe ◽  
Oil And Gas Industry ◽  
Drill String ◽  
Design Parameters ◽  
Experimental Investigations ◽  
Torsional Vibrations ◽  
Stick Slip ◽  
The Impact

Drilling is one of the costliest activities in oil and gas industry due to the complexity of interactions with downhole rock formation. Under such conditions, the uncertainty of drillstring behaviour increase and hence it becomes difficult to predict the causes, occurrences, and types of failures. Lateral and torsional vibrations often cause failure of Bottom Hole Assembly (BHA), drillstring failure, drill bit and wall borehole damages. In this work, a model is presented to determine the impact of lateral and torsional vibrations on a drillstring during the drilling operation. The model aims to mimic real drillstring behaviour inside a wellbore with regards to its dynamic movements due to multiple real situations such as eccentricity of collars, drill pipe sections, and stick-slip phenomena occurring due to the interaction of the bit and the drillstring with the well formation. The work aims to develop a basis for determining critical operating speeds and design parameters to provide safe drilling procedures and reduce drill string fatigue failure. Lagrangian approach is used in this study to attain drillstring lateral and torsional vibration coupling equations. The nonlinear equations are solved numerically to obtain the response of the system. In this work, we also present a brief description of an in-house constructed experimental setup. The setup has the capability to imitate the downhole lateral and torsional vibration modes. Parameters from the experimental investigations are incorporated for validation of the mathematical models and for prediction of the drillstring fatigue life. Such investigations are essential for oil and gas industries as they provide solutions and recommendations about operational speed, lateral and torsional amplitudes measurements and corrections, and the conditions for avoiding occurrence of natural frequencies of the system.

Millennial Green Drilling: Deliver More with Less (Solution to the Drilling Operations)

2021 ◽  
Author(s):  
D. Kusumawardhani
Keyword(s):  
Oil And Gas ◽  
Rapid Change ◽  
Virus Transmission ◽  
Oil And Gas Industry ◽  
Stick Slip ◽  
Gas Industry ◽  
Digital Ecosystem ◽  
Drilling Operations ◽  
People Movement ◽  
The Impact

The impact of the COVID-19 pandemic spread across the oil and gas industry, which required a rapid change on the way we deliver drilling activity and avoid operational disruption. To assure continuous offshore Jackup drilling operations, an Operator in East Java area and Schlumberger decided to implement Performance Live digitally connected service. It reduces the risk of virus transmission as well as substitutes the requirement for logistic and related costs for personnel onboard. The multiskilled and multistage of one crew came in conjunction with a digital ecosystem to deliver safer and higher-performing operations with less personnel onboard, resulting in carbon footprint reduction. This initiative reduced the operator Operations wellsite crew size and enabled performing most analytical tasks from the office environment. Using this approach, the operation was successfully conducted with zero HSE or service quality incidents. In addition to the ability to proceed with the operations, rig crew size was reduced by 33% from standard configuration, which lowered carbon print by the same amount. Background and Challenges: The objective of the drilling campaign was to increase oil production in operator’s concession operating block from the carbonate reservoirs by drilling an exploration well in 2020. Known as one of the toughest areas in Indonesia for drilling conditions, this basin has a high possibility of total losses environment and massive thick limestone that posed high stick/slip and shock and vibration. Moreover, the COVID-19 pandemic crisis added unprecedented uncertainty and posed many challenges for the operator ensuring business continuity and drilling operations, especially with regards to health, safety, and operational considerations where operations would be conducted with tough logistics and people movement.

Modeling and Experimental Investigations of Drill Pipe Failure

2017 ◽  
Author(s):  
Jamil Abdo ◽  
Edris M. Hassan ◽  
Khaled Boulbrachene ◽  
Jan Kwak
Keyword(s):  
Fatigue Failure ◽  
Torsional Vibration ◽  
Degrees Of Freedom ◽  
Equations Of Motion ◽  
Drill Pipe ◽  
Drill String ◽  
Experimental Investigations ◽  
Vibration Modes ◽  
Pipe Failure ◽  
Coupling Equations

During drilling operations, drill string interacts continuously with rock formation, which result in severe shock and vibrations. Lateral, torsion and axial vibration modes often cause failures of Bottom Hole Assembly (BHA), drill pipe abrasive wear, drill bit and wall borehole damages. It also leads to reduction in Rate of Penetration (ROP) and consequently incur unnecessarily high costs. The Lagrangian approach has been used in this study to attain drill pipe lateral and torsional vibration coupling equations of motion. The mathematical model is expressed in terms of four independent degrees of freedom. The effects of bending and torsion vibrations, and whirling motion of the drill string are incorporated in the developed model. A set of nonlinear equations are solved numerically to obtain the response of the system. In this work, we also present a brief description of an in-house constructed experimental setup. The setup has the capability to imitate the downhole axial, lateral and torsional vibration modes and mechanisms. Experimental investigations for the drill pipe fatigue failure due to lateral and torsional cyclic stresses induced in the drill string are also presented. Such investigations are essential for oil/gas industry as they provide solutions for very common problems such as drill string fatigue failure. The performance of the setup was validated. Numbers of tests were performed to investigate the effects of rotational speeds on the vibration amplitudes of different drill string sizes.

Consideration of Geopolitical Challenges within the Analysis of Geoenvironmental Risks for Oil and Gas Development of the Russian Arctic

2019 ◽  
Vol 16 (6) ◽  
pp. 50-59
Author(s):  
O. P. Trubitsina ◽  
V. N. Bashkin
Keyword(s):  
Oil And Gas ◽  
Oil And Gas Industry ◽  
Optimal Operation ◽  
The Arctic ◽  
Stage Model ◽  
Oil And Gas Development ◽  
Gas Industry ◽  
The Impact ◽  
Further Development ◽  
Geopolitical Risks

The article is devoted to the consideration of geopolitical challenges for the analysis of geoenvironmental risks (GERs) in the hydrocarbon development of the Arctic territory. Geopolitical risks (GPRs), like GERs, can be transformed into opposite external environment factors of oil and gas industry facilities in the form of additional opportunities or threats, which the authors identify in detail for each type of risk. This is necessary for further development of methodological base of expert methods for GER management in the context of the implementational proposed two-stage model of the GER analysis taking to account GPR for the improvement of effectiveness making decisions to ensure optimal operation of the facility oil and gas industry and minimize the impact on the environment in the geopolitical conditions of the Arctic.The authors declare no conflict of interest

How Digital Transformation Improves Perceptions of Oil and Gas Industry

2020 ◽  
Vol 72 (12) ◽  
pp. 33-33
Author(s):  
Chris Carpenter
Keyword(s):  
Digital Technology ◽  
Public Perception ◽  
Business Models ◽  
Oil And Gas ◽  
Digital Technologies ◽  
Oil And Gas Industry ◽  
Production Optimization ◽  
Petroleum Engineering ◽  
Co2 Injection ◽  
The Impact

The final afternoon of the 2020 ATCE saw a wide-ranging virtual special session that covered an important but often overlooked facet of the unfolding digitalization revolution. While the rising wave of digital technology usually has been associated with production optimization and cost savings, panelists emphasized that it can also positively influence the global perception of the industry and enhance the lives of its employees. Chaired by Weatherford’s Dimitrios Pirovolou and moderated by John Clegg, J.M. Clegg Ltd., the session, “The Impact of Digital Technologies on Upstream Operations To Improve Stakeholder Perception, Business Models, and Work-Life Balance,” highlighted expertise taken from professionals across the industry. Panelists included petroleum engineering professor Linda Battalora and graduate research assistant Kirt McKenna, both from the Colorado School of Mines; former SPE President Darcy Spady of Carbon Connect International; and Dirk McDermott of Altira Group, an industry-centered venture-capital company. Battalora described the complex ways in which digital technology and the goal of sustainability might interact, highlighting recent SPE and other industry initiatives such as the GAIA Sustainability Program and reviewing the United Nations Sustainable Development Goals (SDGs). McKenna, representing the perspective of the Millennial generation, described the importance of “agile development,” in which the industry uses new techniques not only to improve production but also to manage its employees in a way that heightens engagement while reducing greenhouse-gas emissions. Addressing the fact that greater commitment will be required to remove the “tougher two-thirds” of the world’s hydrocarbons that remain unexploited, Spady explained that digital sophistication will allow heightened productivity for professionals without a sacrifice in quality of life. Finally, McDermott stressed the importance of acknowledging that the industry often has not rewarded shareholders adequately, but pointed to growing digital components of oil and gas portfolios as an encouraging sign. After the initial presentations, Clegg moderated a discussion of questions sourced from the virtual audience. While the questions spanned a range of concerns, three central themes included the pursuit of sustainability, with an emphasis on carbon capture; the shape that future work environments might take; and how digital technologies power industry innovation and thus affect public perception. In addressing the first of these, Battalora identified major projects involving society-wide stakeholder involvement in pursuit of a regenerative “circular economy” model, such as Scotland’s Zero Waste Plan, while McKenna cited the positives of CO2-injection approaches, which he said would involve “partnering with the world” to achieve both economic and sustainability goals. While recognizing the importance of the UN SDGs in providing a global template for sustainability, McDermott said that the industry must address the fact that many investors fear rigid guidelines, which to them can represent limitations for growth or worse.

Study the effect of casting temperature on details from thermo-plastic materials

2020 ◽  
pp. 42-45
Author(s):  
J.A. Kerimov ◽  
Keyword(s):  
Oil And Gas ◽  
Oil And Gas Industry ◽  
Mold Temperature ◽  
Quality Parameters ◽  
Oil Field ◽  
Casting Temperature ◽  
Gas Industry ◽  
Field Equipment ◽  
Wide Range ◽  
The Impact

The implementation of plastic details in various constructions enables to reduce the prime cost and labor intensity of machine and device manufacturing, decrease the weight of design and improve their quality and reliability at the same time. The studies were carried out with the aim of labor productivity increase and substitution of colored and black metals with plastic masses. For this purpose, the details with certain characteristics were selected for further implementation of developed technological process in oil-gas industry. The paper investigates the impact of cylinder and compression mold temperature on the quality parameters (shrinkage and hardness) of plastic details in oil-field equipment. The accessible boundaries of quality indicators of the details operated in the equipment of exploration, drilling and exploitation of oil and gas industry are studied in a wide range of mode parameters. The mathematic dependences between quality parameters (shrinkage and hardness) of the details on casting temperature are specified.

On Approaches to Taking into Account the Risks of Changing Climatic Conditions when Planning and Implementing Oil and Gas Projects

2021 ◽  
Vol 18 (1) ◽  
pp. 52-65
Author(s):  
P. N. Mikheev
Keyword(s):  
Climate Change ◽  
Oil And Gas ◽  
Oil And Gas Industry ◽  
Climatic Conditions ◽  
Qualitative Assessment ◽  
Physical Factors ◽  
Gas Industry ◽  
Climate Risks ◽  
The Impact

The article discusses issues related to the impact of climate change on the objects of the oil and gas industry. The main trends in climate change on a global and regional (on the territory of Russian Federation) scale are outlined. Possible approaches to the identification and assessment of climate risks are discussed. The role of climatic risks as physical factors at various stages of development and implementation of oil and gas projects is shown. Based on the example of oil and gas facilities in the Tomsk region, a qualitative assessment of the level of potential risk from a weather and climatic perspective is given. Approaches to creating a risk management and adaptation system to climate change are presented.

scholarly journals An empirical study of oil and gas value chain agility in the UAE

2018 ◽  
Vol 25 (9) ◽  
pp. 3541-3569 ◽  
Author(s):  
Ala Shqairat ◽  
Balan Sundarakani
Keyword(s):  
Supply Chain ◽  
United Arab Emirates ◽  
Value Chain ◽  
Oil And Gas ◽  
Oil And Gas Industry ◽  
Value Chains ◽  
Study Region ◽  
Content Type ◽  
Moderate Effect ◽  
The Impact

Purpose The purpose of this paper is to investigate the agility of oil and gas value chains in the United Arab Emirates (UAE) and to understand the impact of implementing supply disruption (SD) strategies, outsourcing strategies (OS) and management strategies (MS) on oil and gas value chain agility (VCA). The results can support the oil and gas industry across the UAE to build resilience in the value chain. Design/methodology/approach The research design consists of a comprehensive literature review, followed by questionnaire-based survey responses of 106 participants and comprehensive statistical analysis, thus validate the developed theoretical framework and contribute to both practical and methodological approaches. Findings The findings indicate that oil and gas value chain in the UAE has moderate a significant degree of SD, when OS in place that are synchronized with the overall MS. Among the hypotheses developed, two were accepted thus warranting both SD strategies (r=+0.432) and MS (r= +0.457) found to have a positive moderate effect on VCA. The third hypothesis was rejected by revealing OS (r=+0.387) found to have a positive moderate relationship with VCA. Therefore, implementation of all three strategies has a positive moderate effect on the agility of the value chain and, therefore, supports to sustain competitive position. Research limitations/implications Some of the limitations of this research include the geographic coverage of the study region and other methodological limitation. Practical implications The research provides guidance for oil and gas supply chain managers to better understand the critical factors that impact and determine VCA. The paper also describes relevant strategies that should be taken into consideration by these managers in order to build their agile value chains. Social implications The research contributes to the social dimensions of supply chain sustainability of how resilient is the oil and gas value chain during uncertain conditions, so that it can respond to uncertain changes in order to contribute to corporate social responsibility. Originality/value This research is the first of its kind in the UAE region to assess the link between dimensions of agile value chain, OS, SD strategies and MS primarily from the Emirates of Abu Dhabi and Dubai.

scholarly journals How Oil Contracts Affect Human Rights

2018 ◽  
Vol 3 (4) ◽  
pp. 30
Author(s):  
Maria João Mimoso ◽  
Clara da Conceição de Sousa Alves ◽  
Diogo Filipe Dias Gonçalves
Keyword(s):  
Human Rights ◽  
Oil And Gas ◽  
Social Issues ◽  
Oil And Gas Industry ◽  
Gas Industry ◽  
Oil Companies ◽  
The Social ◽  
Oil Contracts ◽  
The 19Th Century ◽  
The Impact

Since the beginning of the 19th century, we have assisted major proliferation of the oil and gas industry. This phenomenon of exponential growth is due to the fact that oil companies hold the world’s oil monopoly on the extraction, processing and commercialization. Therefore, as being one of the most influential sectors in the world, is crucial to strictly regulate how oil and gas contracts concerns the potential environmental and social impacts arising from the conduct of petroleum operations and how such behavior affects the human rights. As a matter of fact, the social issues field is an emerging area, and despite such importance, oil contracts do not often deal with them in great detail, corresponding to an actual emptiness of the human rights provisions. In terms of responsibly, oil companies, have an inalienable obligation to ensure that their actions do not violate human rights or contribute for their violation. This study aims to trace a detailed analysis of the impact of the oil and gas agreements in human rights. In order to fully comprehend the deep effects of this industry, we will examine, in detail, numerous of published oil and gas agreements, as well as, decode which are the real standards and practices accepted by this industry. We will use a deductive and speculative reasoning. We will try to demonstrate how incipient and short protection is given to human rights and what responsible conducts must urgently be developed.

Sign in / Sign up

Export Citation Format

Share Document