To Demonstrate the Potential Application of “Low Temperature and High Performance Silicon Heterojunction Solar Cells Fabricated Using HWCVD” in Wireless Sensor Network: An Initial Research

2018 ◽  
Vol 140 (4) ◽  
Author(s):  
Mohit Agarwal ◽  
Amit Munjal ◽  
Rajiv Dusane

Wireless sensor network (WSN) is widely used in a variety of applications including habitat monitoring, military surveillance, environmental monitoring, scientific applications, etc. The major limitation of WSN is that sometimes it is not feasible to replace or recharge the battery once it gets fully exhausted and thus, it limits the lifetime of WSN. One of the possible solutions to overcome this limitation is to incorporate any energy harvesting device, which can use the alternative energy sources to charge the battery. However, the processing temperature and the performance of energy harvesting devices limit their applications. In this paper, low temperature and high performance single-sided silicon heterojunction (SHJ) solar cells are fabricated with 13% efficiency using hot-wire chemical vapor deposition (HWCVD) method. This paper also describes an energy management model that successfully addresses the various issues in the existing energy harvesting models. In order to implement the proposed model, the results show that the high efficiency SHJ solar cells are best suitable candidate as an energy harvesting device that can be incorporated inside the node. The subsequent analysis shows that the consumed power per day by the node can be successfully recovered from the SHJ solar cells, if the sunlight is available only for 25 min in a day with 100 mW/cm2 intensity. This clearly indicates that the node's battery will remain fully charged if the above said condition is satisfied, which seems to be very feasible. Finally, one can conclude that the node functioning will remain active till the battery lifetime i.e., approximately 30 years for Li-ion battery.

Processes ◽  
2021 ◽  
Vol 9 (10) ◽  
pp. 1693
Author(s):  
Chanchan Du ◽  
Lixin Zhang ◽  
Xiao Ma ◽  
Xiaokang Lou ◽  
Yongchao Shan ◽  
...  

Scientific researchers have applied newly developed technologies, such as sensors and actuators, to different fields, including environmental monitoring, traffic management, and precision agriculture. Using agricultural technology to assist crop fertilization is an important research innovation that can not only reduce the workload of farmers, but also reduce resource waste and soil pollution. This paper describes the design and development of a water-fertilizer control system based on the soil conductivity threshold. The system uses a low-cost wireless sensor network as a data collection and transmission tool and transmits the data to the decision support system. The decision support system considers the change in soil electrical conductivity (EC) and moisture content to guide the application of water-fertilizer, and then improves the fertilization accuracy of the water-fertilizer control system. In the experiment, the proposed water-fertilizer control system was tested, and it was concluded that, compared with the existing traditional water-fertilizer integration control system, the amount of fertilizer used by the system was reduced by 10.89% on average, and it could save 0.76–0.87 tons of fertilizer throughout the whole growth period of cotton.


2013 ◽  
Vol 798-799 ◽  
pp. 480-483
Author(s):  
Tao Ma ◽  
Juan Chen

The new method used the node to make up the keyword management tree. The keyword management tree was optimized with renewing the group keyword. In the meanwhile, the use of father nodes and the processing batch method improved the keyword renewing efficiency. The analysis result of theory shows that the method is a high efficiency and extendible group keyword management method which used in the heterogeneous wireless sensor network.


Author(s):  
Aditi Paul ◽  
Indu Pandey

Energy harvesting wireless sensor network (EH-WSN) harvests energy from the environment to supply power to the sensor nodes which apparently enhances their lifetime. However, the unpredictable nature of the resources throws challenges to the sustainability of energy supply for the continuous network operation. This creates a gap between unstable energy harvesting rates & energy requirements of the nodes of the network. The state-of-the-art algorithms proposed so far to address this problem domain are not able to bridge the gap fully to standardize the framework. Hence there is considerable scope of research to create a trade-off between EH techniques and specially designed protocols for in EH-WSN. Current study evaluates the performance and efficiency of some futuristic techniques which incorporate advanced tools and algorithms. The study aims to identify the strength and weaknesses of the proposed techniques which can emerge specific research requirement in this field. Finally, we propose a research direction towards Multi-source Hybrid EH-WSN (MHEHWSN) which is able to maximize energy availability and functional efficiency. The scope of this study is to develop a notion of a framework which eliminates the limitations of very recent techniques of EH-WSN by including multiple energy resources to extract required energy even in presence of unpredictability. However, keeping in mind the ease of use and less complex structure Multi-source hybrid EH technique requires a careful design paradigm.


2019 ◽  
Vol 6 (1) ◽  
pp. 918-927 ◽  
Author(s):  
Fang Deng ◽  
Xianghu Yue ◽  
Xinyu Fan ◽  
Shengpan Guan ◽  
Yue Xu ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document