scholarly journals Experimental Quantification of Fan Rotor Effects on Inlet Swirl Using Swirl Distortion Descriptors

2018 ◽  
Vol 140 (8) ◽  
Author(s):  
Dustin J. Frohnapfel ◽  
K. Todd Lowe ◽  
Walter F. O'Brien
Keyword(s):  
Large Scale ◽  
Three Dimensional ◽  
Aircraft Design ◽  
Small Scale ◽  
Commercial Aircraft ◽  
Flow Angle ◽  
Turbofan Engines ◽  
Design Concepts ◽  
Significant Research ◽  
Inlet Swirl

The prominence of highly integrated engine/airframe architectures in modern commercial aircraft design concepts has led to significant research efforts investigating the use of conventional turbofan engines in unconventional installations where severe inlet distortions can arise. In order to determine fan rotor capabilities for reducing or eliminating a complex inlet swirl distortion, an experimental investigation using a StreamVaneTM swirl distortion generator was conducted in a turbofan engine research platform. Three-dimensional (3D) flow data collected at two discrete planes surrounding the fan rotor indicated that the intensity of the swirl distortion was decreased by the fan rotor; however, substantial swirl distortion effects remained in the fan exit flow. Flow angle magnitudes and swirl intensity (SI) decreased by approximately 30–40% across the fan rotor, while the presence of large-scale features within the distortion profile was nearly eliminated. Secondary flow streamlines indicated that small-scale features of the distortion were less affected by the rotating component and remained coherent at the fan rotor outlet plane. These results led to the conclusion that swirl distortion survived interactions with the fan rotor, leading to off-design conditions cascading through downstream engine components.

Experimental Quantification of Fan Rotor Effects on Inlet Swirl Using Swirl Distortion Descriptors

2017 ◽  
Author(s):  
Dustin J. Frohnapfel ◽  
Walter F. O’Brien ◽  
K. Todd Lowe
Keyword(s):  
Large Scale ◽  
Three Dimensional ◽  
Aircraft Design ◽  
Small Scale ◽  
Commercial Aircraft ◽  
Flow Angle ◽  
Turbofan Engines ◽  
Design Concepts ◽  
Significant Research ◽  
Inlet Swirl

The prominence of highly integrated engine/airframe architectures in modern commercial aircraft design concepts has led to significant research efforts investigating the use of conventional turbofan engines in unconventional installations where severe inlet distortions can arise. In order to determine fan rotor capabilities for reducing or eliminating a complex inlet swirl distortion, an experimental investigation using a StreamVane™ swirl distortion generator was conducted in a turbofan engine research platform. Three-dimensional flow data collected at two discrete planes surrounding the fan rotor indicated that the intensity of the swirl distortion was decreased by the fan rotor; however, substantial swirl distortion effects remained in the fan exit flow. Flow angle magnitudes and swirl intensity decreased by approximately 30–40% across the fan rotor, while the presence of large-scale features within the distortion profile was nearly eliminated. Secondary flow streamlines indicated that small-scale features of the distortion were less affected by the rotating component and remained coherent at the fan rotor outlet plane. These results led to the conclusion that swirl distortion survived interactions with the fan rotor, leading to off-design conditions cascading through downstream engine components.

Verification and Validation of High-Fidelity Open-Source Simulation Tools for Supersonic Aircraft Aerodynamic Analysis

2021 ◽  
Author(s):  
Henry Stoldt ◽  
Artem Korobenko ◽  
Paul Ziade ◽  
Craig Johansen
Keyword(s):  
Open Source ◽  
Large Scale ◽  
Delta Wing ◽  
Three Dimensional ◽  
Aircraft Design ◽  
Verification And Validation ◽  
Small Scale ◽  
High Fidelity ◽  
Supersonic Aircraft ◽  
Academic Settings

Abstract Small supersonic vehicle concepts used as research platforms to test new aerospace technologies, such as advanced propulsion systems or large sensor payloads, require major modifications to conventional, large-scale, manned, supersonic airframe design. High-fidelity numerical simulation of these concepts in academic settings often requires the use of in-house or available open-source tools instead of expensive commercial software or those with export-control restrictions. A verification and validation analysis of two widely-used open-source compressible-flow solvers, rhoCentralFoam (rCF) and SU2, is performed for several flow problems relevant to the supersonic aerodynamics of small-scale, autonomous aircraft concepts. The one-dimensional shock tube problem, two-dimensional supersonic turbulent boundary layer, and three-dimensional delta wing are simulated with both solvers. The effects of flux scheme, flux limiters, and Courant-Friedrichs-Lewy (CFL) number on solution accuracy, stability, and solver speed are assessed. The solvers' limitations and their usefulness as supersonic aircraft design tools in a holistic sense are discussed.

Turbulent flow between counter-rotating concentric cylinders: a direct numerical simulation study

2008 ◽  
Vol 615 ◽  
pp. 371-399 ◽  
Author(s):  
S. DONG
Keyword(s):  
Turbulent Flow ◽  
Large Scale ◽  
Outer Cylinder ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Taylor Vortex ◽  
Small Scale ◽  
Mean Flow ◽  
Concentric Cylinders ◽  
High Reynolds

We report three-dimensional direct numerical simulations of the turbulent flow between counter-rotating concentric cylinders with a radius ratio 0.5. The inner- and outer-cylinder Reynolds numbers have the same magnitude, which ranges from 500 to 4000 in the simulations. We show that with the increase of Reynolds number, the prevailing structures in the flow are azimuthal vortices with scales much smaller than the cylinder gap. At high Reynolds numbers, while the instantaneous small-scale vortices permeate the entire domain, the large-scale Taylor vortex motions manifested by the time-averaged field do not penetrate a layer of fluid near the outer cylinder. Comparisons between the standard Taylor–Couette system (rotating inner cylinder, fixed outer cylinder) and the counter-rotating system demonstrate the profound effects of the Coriolis force on the mean flow and other statistical quantities. The dynamical and statistical features of the flow have been investigated in detail.

Large- and small-scale vortical motions in a shear layer perturbed by tabs

1999 ◽  
Vol 382 ◽  
pp. 307-329 ◽  
Author(s):  
JUDITH K. FOSS ◽  
K. B. M. Q. ZAMAN
Keyword(s):  
Shear Layer ◽  
Pitch Angle ◽  
Large Scale ◽  
Dimensional Space ◽  
Three Dimensional ◽  
Small Scale ◽  
Streamwise Vortices ◽  
Streamwise Vorticity ◽  
Cross Sectional ◽  
Scale Population

The large- and small-scale vortical motions produced by ‘delta tabs’ in a two-stream shear layer have been studied experimentally. An increase in mixing was observed when the base of the triangular shaped tab was affixed to the trailing edge of the splitter plate and the apex was pitched at some angle with respect to the flow axis. Such an arrangement produced a pair of counter-rotating streamwise vortices. Hot-wire measurements detailed the velocity, time-averaged vorticity (Ωx) and small-scale turbulence features in the three-dimensional space downstream of the tabs. The small-scale structures, whose scale corresponds to that of the peak in the dissipation spectrum, were identified and counted using the peak-valley-counting technique. The optimal pitch angle, θ, for a single tab and the optimal spanwise spacing, S, for a multiple tab array were identified. Since the goal was to increase mixing, the optimal tab configuration was determined from two properties of the flow field: (i) the large-scale motions with the maximum Ωx, and (ii) the largest number of small-scale motions in a given time period. The peak streamwise vorticity magnitude [mid ]Ωx−max[mid ] was found to have a unique relationship with the tab pitch angle. Furthermore, for all cases examined, the overall small-scale population was found to correlate directly with [mid ]Ωx−max[mid ]. Both quantities peaked at θ≈±45°. It is interesting to note that the peak magnitude of the corresponding circulation in the cross-sectional plane occurred for θ≈±90°. For an array of tabs, the two quantities also depended on the tab spacing. An array of contiguous tabs acted as a solid deflector producing the weakest streamwise vortices and the least small-scale population. For the measurement range covered, the optimal spacing was found to be S≈1.5 tab widths.

scholarly journals A Multidimensional and Multiscale Model for Pressure Analysis in a Reservoir-Pipe-Valve System

2018 ◽  
Author(s):  
Feng Jie Zheng ◽  
Fu Zheng Qu ◽  
Xue Guan Song
Keyword(s):  
Pressure Fluctuation ◽  
Large Scale ◽  
Three Dimensional ◽  
Industrial Process ◽  
Multiscale Model ◽  
Computational Time ◽  
Small Scale ◽  
Cfd Model ◽  
Computationally Efficient ◽  
Proposed Model

Reservoir-pipe-valve (RPV) systems are widely used in many industrial process. The pressure in an RPV system plays an important role in the safe operation of the system, especially during the sudden operation such as rapid valve opening/closing. To investigate the pressure especially the pressure fluctuation in an RPV system, a multidimensional and multiscale model combining the method of characteristics (MOC) and computational fluid dynamics (CFD) method is proposed. In the model, the reservoir is modeled by a zero-dimensional virtual point, the pipe is modeled by a one-dimensional MOC, and the valve is modeled by a three-dimensional CFD model. An interface model is used to connect the multidimensional and multiscale model. Based on the model, a transient simulation of the turbulent flow in an RPV system is conducted, in which not only the pressure fluctuation in the pipe but also the detailed pressure distribution in the valve are obtained. The results show that the proposed model is in good agreement with the full CFD model in both large-scale and small-scale spaces. Moreover, the proposed model is more computationally efficient than the CFD model, which provides a feasibility in the analysis of complex RPV system within an affordable computational time.

scholarly journals A Multidimensional and Multiscale Model for Pressure Analysis in a Reservoir-Pipe-Valve System

2019 ◽  
Vol 141 (5) ◽  
Author(s):  
Feng Jie Zheng ◽  
Chao Yong Zong ◽  
William Dempster ◽  
Fu Zheng Qu ◽  
Xue Guan Song
Keyword(s):  
Large Scale ◽  
Pressure Fluctuations ◽  
Three Dimensional ◽  
Multiscale Model ◽  
Computational Time ◽  
Small Scale ◽  
Dimensional System ◽  
Cfd Model ◽  
Computationally Efficient ◽  
Proposed Model

Reservoir-pipe-valve (RPV) systems are widely used in many industrial processes. The pressure in an RPV system plays an important role in the safe operation of the system, especially during the sudden operations such as rapid valve opening or closing. To investigate the pressure response, with particular interest in the pressure fluctuations in an RPV system, a multidimensional and multiscale model combining the method of characteristics (MOC) and computational fluid dynamics (CFD) method is proposed. In the model, the reservoir is modeled as a zero-dimensional virtual point, the pipe is modeled as a one-dimensional system using the MOC, and the valve is modeled using a three-dimensional CFD model. An interface model is used to connect the multidimensional and multiscale model. Based on the model, a transient simulation of the turbulent flow in an RPV system is conducted in which not only the pressure fluctuation in the pipe but also the detailed pressure distribution in the valve is obtained. The results show that the proposed model is in good agreement when compared with a high fidelity CFD model used to represent both large-scale and small-scale spaces. As expected, the proposed model is significantly more computationally efficient than the CFD model. This demonstrates the feasibility of analyzing complex RPV systems within an affordable computational time.

scholarly journals The Development of Fast Response Aerodynamic Probes for Flow Measurements in Turbomachinery

1994 ◽  
Author(s):  
Roger W. Ainsworth ◽  
John L. Allen ◽  
J. Julian M. Batt
Keyword(s):  
Mach Number ◽  
Large Scale ◽  
Flow Direction ◽  
Three Dimensional ◽  
Pressure Sensors ◽  
Fast Response ◽  
Rotor Blades ◽  
Small Scale ◽  
Hot Wire ◽  
Flow Measurements

The advent of a new generation of transient rotating turbine simulation facilities, where engine values of Reynolds and Mach number are matched simultaneously together with the relevant rotational parameters for dimensional similitude (Dunn et al [1988], Epstein et al [1984]. Ainsworth et al [1988]), has provided the stimulus for developing improved instrumentation for investigating the aerodynamic flows in these stages. Much useful work has been conducted in the past using hot-wire and laser anemometers. However, hot-wire anemometers are prone to breakage in the high pressure flows required for correct Reynolds numbers, Furthermore some laser techniques require a longer runtime than these transient facilites permit, and generally yield velocity information only, giving no data on loss production. Advances in semiconductor aerodynamic probes are beginning to fulfil this perceived need. This paper describes advances made in the design, construction, and testing of two and three dimensional fast response aerodynamic probes, where semiconductor pressure sensors are mounted directly on the surface of the probes, using techniques which have previously been successfully used on the surface of rotor blades (Ainsworth, Dietz and Nunn [1991]). These are to be used to measure Mach number and flow direction in compressible unsteady flow regimes. In the first section, a brief review is made of the sensor and associated technology which has been developed to permit a flexible design of fast response aerodynamic probe. Following this, an extensive programme of testing large scale aerodynamic models of candidate geometries for suitable semiconductor scale probes is described, and the results of these discussed. The conclusions of these experiments, conducted for turbine representative mean and unsteady flows, yielded new information for optimising the design of the small scale semiconductor probes, in terms of probe geometry, sensor placement, and aerodynamic performance. Details are given of a range of wedge and pyramid semiconductor probes constructed, and the procedures used in calibrating and making measurements with them. Differences in performance are discussed, allowing the experimenter to choose an appropriate probe for the particular measurement required. Finally, the application of prototype semiconductor probes in a transient rotor experiment at HP turbine representative conditions is described, and the data so obtained is compared with (PD solutions of the unsteady viscous flow-field.

Some specific features of atmospheric tubulence

1962 ◽  
Vol 13 (1) ◽  
pp. 77-81 ◽  
Author(s):  
A. M. Oboukhov
Keyword(s):  
Atmospheric Turbulence ◽  
Large Scale ◽  
Three Dimensional ◽  
Wind Tunnels ◽  
Small Scale ◽  
Horizontal Scale ◽  
Rough Approximation ◽  
External Conditions ◽  
Scale Turbulence

The spectrum of atmospheric turbulence is very broad by comparison with spectra in wind tunnels. We introduce the notion of small-scale and large-scale turbulence. Small-scale turbulence consists of a set of disturbances, the scales of which do not exceed the distance to the wall and for which the hypothesis of three-dimensional isotropy is valid in a certain rough approximation. Large-scale turbulence is essentially anisotropic; the horizontal scale in the atmosphere is much larger than the vertical one, the latter being confined to a certain characteristic height H. The horizontal scale varies widely according to the external conditions and characteristics of the medium.

scholarly journals Bayesian approach for three-dimensional aquifer characterization at the Hanford 300 Area

2010 ◽  
Vol 14 (10) ◽  
pp. 1989-2001 ◽  
Author(s):  
H. Murakami ◽  
X. Chen ◽  
M. S. Hahn ◽  
Y. Liu ◽  
M. L. Rockhold ◽  
...  
Keyword(s):  
Test Data ◽  
Bayesian Approach ◽  
Posterior Distribution ◽  
Large Scale ◽  
Three Dimensional ◽  
Measurement Data ◽  
Data Uncertainty ◽  
Small Scale ◽  
Injection Test ◽  
Conductivity Profile

Abstract. This study presents a stochastic, three-dimensional characterization of a heterogeneous hydraulic conductivity field within the Hanford 300 Area, Washington, USA, by assimilating large-scale, constant-rate injection test data with small-scale, three-dimensional electromagnetic borehole flowmeter (EBF) measurement data. We first inverted the injection test data to estimate the transmissivity field, using zeroth-order temporal moments of pressure buildup curves. We applied a newly developed Bayesian geostatistical inversion framework, the method of anchored distributions (MAD), to obtain a joint posterior distribution of geostatistical parameters and local log-transmissivities at multiple locations. The unique aspects of MAD that make it suitable for this purpose are its ability to integrate multi-scale, multi-type data within a Bayesian framework and to compute a nonparametric posterior distribution. After we combined the distribution of transmissivities with depth-discrete relative-conductivity profile from the EBF data, we inferred the three-dimensional geostatistical parameters of the log-conductivity field, using the Bayesian model-based geostatistics. Such consistent use of the Bayesian approach throughout the procedure enabled us to systematically incorporate data uncertainty into the final posterior distribution. The method was tested in a synthetic study and validated using the actual data that was not part of the estimation. Results showed broader and skewed posterior distributions of geostatistical parameters except for the mean, which suggests the importance of inferring the entire distribution to quantify the parameter uncertainty.

Three-dimensional conditional structure of a high-Reynolds-number turbulent boundary layer

2011 ◽  
Vol 673 ◽  
pp. 255-285 ◽  
Author(s):  
N. HUTCHINS ◽  
J. P. MONTY ◽  
B. GANAPATHISUBRAMANI ◽  
H. C. H. NG ◽  
I. MARUSIC
Keyword(s):  
Skin Friction ◽  
High Reynolds Number ◽  
Large Scale ◽  
Three Dimensional ◽  
Streamwise Velocity ◽  
Small Scale ◽  
Large Scale Structures ◽  
Local Mean ◽  
Scale Structures ◽  
High Reynolds

An array of surface hot-film shear-stress sensors together with a traversing hot-wire probe is used to identify the conditional structure associated with a large-scale skin-friction event in a high-Reynolds-number turbulent boundary layer. It is found that the large-scale skin-friction events convect at a velocity that is much faster than the local mean in the near-wall region (the convection velocity for large-scale skin-friction fluctuations is found to be close to the local mean at the midpoint of the logarithmic region). Instantaneous shear-stress data indicate the presence of large-scale structures at the wall that are comparable in scale and arrangement to the superstructure events that have been previously observed to populate the logarithmic regions of turbulent boundary layers. Conditional averages of streamwise velocity computed based on a low skin-friction footprint at the wall offer a wider three-dimensional view of the average superstructure event. These events consist of highly elongated forward-leaning low-speed structures, flanked on either side by high-speed events of similar general form. An analysis of small-scale energy associated with these large-scale events reveals that the small-scale velocity fluctuations are attenuated near the wall and upstream of a low skin-friction event, while downstream and above the low skin-friction event, the fluctuations are significantly amplified. In general, it is observed that the attenuation and amplification of the small-scale energy seems to approximately align with large-scale regions of streamwise acceleration and deceleration, respectively. Further conditional averaging based on streamwise skin-friction gradients confirms this observation. A conditioning scheme to detect the presence of meandering large-scale structures is also proposed. The large-scale meandering events are shown to be a possible source of the strong streamwise velocity gradients, and as such play a significant role in modulating the small-scale motions.

Sign in / Sign up

Export Citation Format

Share Document