Dynamic Analysis for the Rotor Drop Process and Its Application to a Horizontal Rotor-Active Magnetic Bearing System in Helium Gas

2018 ◽  
Vol 140 (4) ◽  
Author(s):  
Zhao Yulan ◽  
Liu Xingnan ◽  
Yang Guojun ◽  
Shi Zhengang ◽  
Zhao Lei
Keyword(s):  
High Speed ◽  
Magnetic Bearing ◽  
Active Magnetic Bearing ◽  
Actual Behavior ◽  
Energy Technology ◽  
Active Magnetic Bearings ◽  
Helium Gas ◽  
New Energy ◽  
Auxiliary Bearing ◽  
Left And Right

The high-temperature gas-cooled reactor pebble-bed modular (HTR-PM) has been proposed by the Institute of Nuclear and New Energy Technology of Tsinghua University, in which the active magnetic bearings (AMBs) are equipped to support the high-speed rotor in the helium circulator system. In the case of AMB failures, emergencies, or overload conditions, the auxiliary bearing is applied as the backup protector to provide temporary mechanical support and displacement constraint for the dropping rotor. A detailed dynamic model is established to reveal the behavior of the dropping rotor. This model is able to describe the rotor displacement and inclination around each axis. The left and right rotor orbits are revealed. Dropping experiments are also carried out to reveal the actual behavior of the dropping rotor in helium. The predicted and experimental results will benefit further study, design, and application of the auxiliary bearing in HTR-PM helium circulator.

scholarly journals Development and Experimental Validation of Auxiliary Rolling Bearing Models for Active Magnetic Bearings (AMBs) Applications

2019 ◽  
Vol 2019 ◽  
pp. 1-19 ◽  
Author(s):  
Anna Tangredi ◽  
Enrico Meli ◽  
Andrea Rindi ◽  
Alessandro Ridolfi ◽  
Pierluca D’Adamio ◽  
...  
Keyword(s):  
Load Capacity ◽  
Critical Phenomenon ◽  
Magnetic Bearing ◽  
Design Tool ◽  
Magnetic Bearings ◽  
Active Magnetic Bearing ◽  
Active Magnetic Bearings ◽  
Short Period ◽  
Auxiliary Bearing ◽  
Bearing System

Nowadays, the search for increasing performances in turbomachinery applications has led to a growing utilization of active magnetic bearings (AMBs), which can bring a series of advantages thanks to their features: AMBs allow the machine components to reach higher peripheral speeds; in fact there are no wear and lubrication problems as the contact between bearing surfaces is absent. Furthermore, AMBs characteristic parameters can be controlled via software, optimizing machine dynamics performances. However, active magnetic bearings present some peculiarities, as they have lower load capacity than the most commonly used rolling and hydrodynamic bearings, and they need an energy source; for these reasons, in case of AMBs overload or breakdown, an auxiliary bearing system is required to support the rotor during such landing events. During the turbomachine design process, it is fundamental to appropriately choose the auxiliary bearing type and characteristics, because such components have to resist to the rotor impact; so, a supporting design tool based on accurate and efficient models of auxiliary bearings is very useful for the design integration of the Active Magnetic Bearing System into the machine. This paper presents an innovative model to accurately describe the mechanical behavior of a complete rotor-dynamic system composed of a rotor equipped with two auxiliary rolling bearings. The model, developed and experimentally validated in collaboration with Baker Hughes a GE company (providing the test case and the experimental data), is able to reproduce the key physical phenomena experimentally observed; in particular, the most critical phenomenon noted during repeated experimental combined landing tests is the rotor forward whirl, which occurs in case of high friction conditions and greatly influences the whole system behavior. In order to carefully study some special phenomena like rotor coast down on landing bearings (which requires long period of time to evolve and involves many bodies and degrees of freedom) or other particular events like impacts (which occur in a short period of time), a compromise between accuracy of the results and numerical efficiency has been pursued. Some of the elements of the proposed model have been previously introduced in literature; however the present work proposes some new features of interest. For example, the lateral and the axial models have been properly coupled in order to correctly reproduce the effects observed during the experimental tests and a very important system element, the landing bearing compliant suspension, has been properly modelled to more accurately describe its elastic and damping effects on the system. Furthermore, the model is also useful to characterize the frequencies related to the rotor forward whirl motion.

Dynamic Analysis for the Rotor Drop Process and Its Application to a Vertically Levitated Rotor/Active Magnetic Bearing System

2017 ◽  
Vol 139 (4) ◽  
Author(s):  
Yulan Zhao ◽  
Guojun Yang ◽  
Patrick Keogh ◽  
Lei Zhao
Keyword(s):  
High Speed ◽  
Sliding Friction ◽  
Engineering Application ◽  
Magnetic Bearing ◽  
Contact Forces ◽  
Active Magnetic Bearing ◽  
Detailed Model ◽  
Vertical Rotor ◽  
Auxiliary Bearing ◽  
Rotor Dynamic

Active magnetic bearings (AMBs) have been utilized widely to support high-speed rotors. However, in the case of AMB failure, emergencies, or overload conditions, the auxiliary bearing is chosen as the backup protector to provide mechanical supports and displacement constraints for the rotor. With lack of support, the auxiliary bearing will catch the dropping rotor. Accordingly, high contact forces and corresponding thermal generation due to mechanical rub are applied on the dynamic contact area. Rapid deterioration may be brought about by excessive dynamic and thermal shocks. Therefore, the auxiliary bearing must be sufficiently robust to guarantee the safety of the AMB system. Many approaches have been put forward in the literature to estimate the rotor dynamic motion, nonetheless most of them focus on the horizontal rotor drop and few consider the inclination around the horizontal plane for the vertical rotor. The main purpose of this paper is to predict the rotor dynamic behavior accurately for the vertical rotor drop case. A detailed model for the vertical rotor drop process with consideration of the rotating inclination around x- and y-axes is proposed in this paper. Additionally, rolling and sliding friction are distinguished in the simulation scenario. This model has been applied to estimate the rotor drop process in a helium circulator system equipped with AMBs for the 10 MW high-temperature gas-cooled reactor (HTR-10). The HTR-10 has been designed and researched by the Institute of Nuclear and New Energy Technology (INET) of Tsinghua University. The auxiliary bearing is utilized to support the rotor in the helium circulator. The validity of this model is verified by the results obtained in this paper as well. This paper also provides suggestions for the further improvement of auxiliary bearing design and engineering application.

Thermal Analysis and Simulation of Auxiliary Bearings and Its Application in the High Temperature Reactor-10

2015 ◽  
Vol 138 (1) ◽  
Author(s):  
Yulan Zhao ◽  
Guojun Yang ◽  
Zhengang Shi ◽  
Lei Zhao
Keyword(s):  
High Temperature ◽  
Magnetic Bearing ◽  
Active Magnetic Bearing ◽  
Hertzian Contact ◽  
Thermal Growth ◽  
Study Results ◽  
New Energy ◽  
Huge Impact ◽  
Auxiliary Bearing ◽  
Amb System

The auxiliary bearing is applied to provide mechanical uphold for the rotational dropping rotor when contact event happens due to the active magnetic bearing (AMB) failure emergencies. During the rotor drop process, the auxiliary bearing will endure huge impact force and friction heat generation. The thermal behavior will affect the mechanical interaction and dynamic behavior of the auxiliary bearing and even induce rapid failure especially when excessive temperature growth occurs. The Institute of Nuclear and New Energy Technology (INET) of Tsinghua University in China has proposed the 10 MW high-temperature gas-cooled reactor (HTR-10). It is designed to guarantee the inherent safety and economic competitiveness. The dry-lubricated ceramic auxiliary bearing is utilized to protect the AMB and aims to ensure the safety of the AMB system in the HTR-10 in the case of the special operational requirements in the reactor. This paper simulates the process of the rotor drop on the auxiliary bearings in the AMB system of the helium blower of the HTR-10, including the analysis of thermal growth based on the Hertzian contact model and a one-dimensional (1D) thermal heat transfer network model. The study results demonstrate the validation of the bearing models and elucidate different responses between mechanical and ceramic auxiliary bearings during contact events. The research in this paper offers important theoretical bases for the auxiliary bearing design to guarantee the safety of the whole system.

Effects of the Magnetic Damper Locations on Dynamic Characteristics of the Active Magnetic Bearing System in Manufacturing Engineering

2012 ◽  
Vol 252 ◽  
pp. 51-55
Author(s):  
Zhen Yu Xie ◽  
Hong Kai Zhou ◽  
Xiao Wang
Keyword(s):  
Dynamic Characteristics ◽  
High Speed ◽  
Magnetic Bearing ◽  
Magnetic Bearings ◽  
Active Magnetic Bearing ◽  
Active Magnetic Bearings ◽  
Actual Operation ◽  
And Control ◽  
System Operating ◽  
Bearing System

The magnetic damper was introduced into the high speed rotating machinery to restrain the vibration of the rotor supported by active magnetic bearings. The experimental setup, which was made up of one rotor, two radial active magnetic bearings, one axial active magnetic bearing, one magnetic damper and control system, was built to investigate the effects of the magnetic damper locations on dynamic characteristics of the system by theoretical analysis, experimental modal analysis and actual operation of the system. The results show that the vibration of the active magnetic bearing system operating at the modal frequency can be reduced more effectively if the magnetic damper is located far from the nodes of the corresponding mode shape.

A Gas Turbine Engine Backup Bearing Operating Beyond 2.5 Million DN

2000 ◽  
Author(s):  
Erik Swanson ◽  
James F. Walton ◽  
Hooshang Heshmat
Keyword(s):  
Gas Turbine ◽  
High Speed ◽  
Gas Turbine Engine ◽  
Magnetic Bearing ◽  
Active Magnetic Bearing ◽  
Test Rig ◽  
Turbine Engine ◽  
Post Test ◽  
Rotor Support ◽  
Auxiliary Bearing

Gas turbine engines and high speed rotating machinery using magnetic bearings require auxiliary and backup bearings for reliability and safety of operation. A 140 mm diameter Zero Clearance Auxiliary Bearing (ZCAB) capable of supporting radial and/or thrust loads of up to 4500 N was designed for an advanced gas turbine engine. The ZCAB was fabricated and tested successfully up to the expected maximum operating speed of 18,000 rpm in a specially configured test rig. The test rig included a 36,000 rpm capable drive motor, a 64 kg rotor which simulates a gas turbine engine shaft dynamics, a damped ball bearing at the drive end and an active magnetic bearing next to the ZCAB. Operation in excess of 240 minutes and 20 transient engagements simulating magnetic bearing failures were completed in the initial tests. Post test inspection revealed minimal wear to the shaft and the ZCAB rollers, whereupon the ZCAB was reassembled for shipment. These preliminary tests confirm the operation and durability of the ZCAB in maintaining rotor support and continued operation even if the primary magnetic bearing support is overloaded or encounters a failure.

scholarly journals INDUCTIVE LINEAR DISPLACEMENT SENSOR IN ACTIVE MAGNETIC BEARING

2019 ◽  
Vol 3 ◽  
pp. 151
Author(s):  
Sergei Loginov ◽  
Dmitriy Fedorov ◽  
Igor Savrayev ◽  
Igor Plokhov ◽  
Andrey Hitrov ◽  
...  
Keyword(s):  
Control System ◽  
High Speed ◽  
High Reliability ◽  
Magnetic Bearing ◽  
Linear Displacement ◽  
Magnetic Bearings ◽  
Active Magnetic Bearing ◽  
Displacement Sensor ◽  
Main Trend ◽  
Active Magnetic Bearings

Active magnetic bearings are increasingly used in various fields of industry. The absence of mechanical contact makes it possible to use them in ultra-high-speed electric drives. The main trend of active magnetic bearings development is the improvement of the control system. The main problem of the control system is the displacement sensor (most of them has low accuracy and large interference). The sensor must have the following properties: simple in realization, high linearity of the characteristic, high sensitivity and noise immunity, high reliability. At the present time there is no sensor that satisfies all these conditions. Most manufacturers use various kinds of filters to get an accurate position signal. This increases the response time of the control system. Thus, problem of designing and modeling the position sensor, considered in the article is topical.

Simplified characteristics of active magnetic bearings

2002 ◽  
Vol 216 (5) ◽  
pp. 623-628 ◽  
Author(s):  
D J Peel ◽  
C M Bingham ◽  
Y Wu ◽  
D Howe
Keyword(s):  
Natural Vibration ◽  
Magnetic Bearing ◽  
Active Magnetic Bearing ◽  
Viscous Damping ◽  
Vibration Frequencies ◽  
Active Magnetic Bearings ◽  
Complex Dynamic ◽  
Speed Range ◽  
Constant Coefficients ◽  
System Characteristics

Traditionally, active magnetic bearing (AMB) systems are designed as an integral component of machines having generally complex dynamic characteristics. An AMB supported rotor has been tested over a speed range that included system natural vibration frequencies. A linear stiffness and viscous damping AMB characteristic with constant coefficients was identified which was independent of the overall system characteristics and which can thus provide simple and transferable data for a machine designer.

On the Use of Actively Controlled Auxiliary Bearings in Magnetic Bearing Systems

2008 ◽  
Author(s):  
Iain S. Cade ◽  
M. Necip Sahinkaya ◽  
Clifford R. Burrows ◽  
Patrick S. Keogh
Keyword(s):  
Controller Design ◽  
Control Strategies ◽  
Frictional Heating ◽  
Magnetic Bearing ◽  
Contact Forces ◽  
Active Magnetic Bearing ◽  
Physical Limit ◽  
Drop Tests ◽  
Auxiliary Bearing ◽  
And Control

Auxiliary bearings are used to prevent rotor/stator contact in active magnetic bearing systems. They are sacrificial components providing a physical limit on the rotor displacement. During rotor/auxiliary bearing contact significant forces normal to the contact zone may occur. Furthermore, rotor slip and rub can lead to localized frictional heating. Linear control strategies may also become ineffective or induce instability due to changes in rotordynamic characteristics during contact periods. This work considers the concept of using actively controlled auxiliary bearings in magnetic bearing systems. Auxiliary bearing controller design is focused on attenuating bearing vibration resulting from contact and reducing the contact forces. Controller optimization is based on the H∞ norm with appropriate weighting functions applied to the error and control signals. The controller is assessed using a simulated rotor/magnetic bearing system. Comparison of the performance of an actively controlled auxiliary bearing is made with that of a resiliently mounted auxiliary bearing. Rotor drop tests, repeated contact tests, and sudden rotor unbalance resulting in trapped contact modes, are considered.

Effects of some design parameters on bifurcation behavior of a magnetically supported coaxial rotor in auxiliary bearings

2017 ◽  
Vol 34 (7) ◽  
pp. 2379-2395 ◽  
Author(s):  
Reza Ebrahimi ◽  
Mostafa Ghayour ◽  
Heshmatallah Mohammad Khanlo
Keyword(s):  
Magnetic Bearing ◽  
Active Magnetic Bearing ◽  
Design Parameters ◽  
Maximum Lyapunov Exponent ◽  
Content Type ◽  
Coaxial Rotor ◽  
Rotor Bearing ◽  
Auxiliary Bearing ◽  
Bearing Stiffness ◽  
Bifurcation Behavior

Purpose This paper aims to present bifurcation analysis of a magnetically supported coaxial rotor model in auxiliary bearings, which includes gyroscopic moments of disks and geometric coupling of the magnetic actuators. Design/methodology/approach Ten nonlinear equations of motion were solved using the Runge–Kutta method. The vibration responses were analyzed using dynamic trajectories, power spectra, Poincaré maps, bifurcation diagrams and the maximum Lyapunov exponent. The analysis was carried out for different system parameters, namely, the inner shaft stiffness, inter-rotor bearing stiffness, auxiliary bearing stiffness and disk position. Findings It was shown that dynamics of the system could be significantly affected by varying these parameters, so that the system responses displayed a rich variety of nonlinear dynamical phenomena, including quasi-periodicity, chaos and jump. Next, some threshold values were provided with regard to the design of appropriate parameters for this system. Therefore, the proposed work can provide an effective means of gaining insights into the nonlinear dynamics of coaxial rotor–active magnetic bearing systems with auxiliary bearings in the future. Originality/value This paper considered the influences of the inner shaft stiffness, inter-rotor bearing stiffness, auxiliary bearing stiffness and disk position on the bifurcation behavior of a magnetically supported coaxial rotor system in auxiliary bearings.

Sign in / Sign up

Export Citation Format

Share Document