scholarly journals Wrench Capability of a Stewart Platform With Series Elastic Actuators

2018 ◽  
Vol 10 (2) ◽  
Author(s):  
Chawin Ophaswongse ◽  
Rosemarie C. Murray ◽  
Sunil K. Agrawal
Keyword(s):  
Degrees Of Freedom ◽  
Stewart Platform ◽  
Six Degrees Of Freedom ◽  
In Series ◽  
Novel Method ◽  
Machine Interface ◽  
Position And Orientation ◽  
Human Usage ◽  
Series Elastic Actuators ◽  
Series Elastic

This paper proposes a novel method for analyzing linear series elastic actuators (SEAs) in a parallel-actuated Stewart platform, which has full six degrees-of-freedom (DOF) in position and orientation. SEAs can potentially provide a better human–machine interface for the user. However, in the study of parallel-actuated systems with full 6DOF, the effect of compliance in series with actuators has not been adequately studied from the perspective of wrench capabilities. We found that some parameters of the springs and the stroke lengths of the linear actuators play a major role in the actuation limits of the system. This is an important consideration when adding SEAs into a Stewart platform or other parallel-actuated robots to improve their human usage.

Design of a Parallel Architecture Robotic Spine Exoskeleton With Series Elastic Actuators

2017 ◽  
Author(s):  
Chawin Ophaswongse ◽  
Rosemarie C. Murray ◽  
Sunil K. Agrawal
Keyword(s):  
Degrees Of Freedom ◽  
Human Subjects ◽  
Parallel Architecture ◽  
Six Degrees Of Freedom ◽  
In Series ◽  
Machine Interface ◽  
Position And Orientation ◽  
Human Usage ◽  
Series Elastic Actuators ◽  
Series Elastic

This paper proposes a novel methodology for the design of series elastic actuators in parallel-actuated platforms which have full six degrees-of-freedom in position and orientation. Series elastic actuators can potentially contribute to lower power consumption and provide a better human-machine interface for the user. This is an important consideration in the use of a robotic spine exoskeleton for human subjects, which motivates this work. In the study of parallel-actuated systems with full six degrees-of-freedom, the effect of compliance in series with actuators has not been adequately studied from the perspective of kinematics and wrench capabilities. These analyses are performed in this paper with the goal to improve the design of the robotic spine exoskeleton (ROSE) and its human usage.

scholarly journals Testing of a MEMS Dynamic Inclinometer Using the Stewart Platform

Sensors ◽  
2019 ◽  
Vol 19 (19) ◽  
pp. 4233 ◽  
Author(s):  
Zhihua Liu ◽  
Chenguang Cai ◽  
Ming Yang ◽  
Ying Zhang
Keyword(s):  
Mechanical System ◽  
Real Time ◽  
Degrees Of Freedom ◽  
Cross Coupling ◽  
Micro Electro Mechanical System ◽  
Stewart Platform ◽  
Forward Kinematics ◽  
Six Degrees Of Freedom ◽  
Position And Orientation ◽  
The Cross

The micro-electro-mechanical system (MEMS) dynamic inclinometer integrates a tri-axis gyroscope and a tri-axis accelerometer for real-time tilt measurement. The Stewart platform has the ability to generate six degrees of freedom of spatial orbits. The method of applying spatial orbits to the testing of MEMS inclinometers is investigated. Inverse and forward kinematics are analyzed for controlling and measuring the position and orientation of the Stewart platform. The Stewart platform is controlled to generate a conical motion, based on which the sensitivities of the gyroscope, accelerometer, and tilt sensing are determined. Spatial positional orbits are also generated in order to obtain the tilt angles caused by the cross-coupling influence. The experiment is conducted to show that the tested amplitude frequency deviations of the gyroscope and tilt sensing sensitivities between the Stewart platform and the traditional rotator are less than 0.2 dB and 0.1 dB, respectively.

Alternative Inverse Kinematic Equations for General RRP and RRR Regional Structures of Manipulators

1996 ◽  
Author(s):  
Peregrine E. J. Riley
Keyword(s):  
Degrees Of Freedom ◽  
Joint Angle ◽  
Inverse Kinematic ◽  
Intersection Point ◽  
Degree Polynomial ◽  
Six Degrees Of Freedom ◽  
Common Intersection ◽  
Position And Orientation ◽  
Spatial Positioning ◽  
Orientational Structure

Abstract Many manipulators with six degrees of freedom are constructed with two distinct sections, a regional structure for spatial positioning, and an orientational structure having a common intersection point for the joint axes. With this arrangement, inverse kinematic solutions for position and orientation may be found separately. While solutions for general three link manipulators have been available since the work of Pieper in 1969, this paper presents new forms of the inverse kinematic equations for general RRP and RRR regional structures. Cartesian coordinates of the F-surface (generated by movement of the outer two joints) together with the outer joint angle are used as the equation variables. In addition, a second degree polynomial approxiamation of the equation may be used for quick iteration to a solution. It is hoped that these new equations will be useful by themselves and in workspace regions where solutions using equations in terms of the joint variables are numerically inaccurate or impossible.

Validation of a Novel 3D-Printed Instrumented Spatial Linkage That Measures Changes in the Rotational Axes of the Tibiofemoral Joint

2013 ◽  
Author(s):  
Daniel P. Bonny ◽  
S. M. Howell ◽  
M. L. Hull
Keyword(s):  
Degrees Of Freedom ◽  
Rigid Bodies ◽  
Anatomic Landmarks ◽  
Tibiofemoral Joint ◽  
Six Degrees Of Freedom ◽  
Revolute Joints ◽  
Flexion Extension ◽  
3D Printed ◽  
Total Knee ◽  
Position And Orientation

The two kinematic axes of the tibiofemoral joint, the flexion-extension (F-E) and longitudinal rotation (LR) axes [1], are unrelated to the anatomic landmarks often used to align prostheses during total knee arthroplasty (TKA) [1, 2]. As a result, conventional TKA changes the position and orientation of the joint line, thus changing the position and orientation of the F-E and LR axes and consequently the kinematics of the knee. However, the extent to which TKA changes these axes is unknown. An instrument that can measure the locations of and any changes to these axes is an instrumented spatial linkage (ISL), a series of six instrumented revolute joints that can measure the six degrees of freedom of motion (DOF) between two rigid bodies without constraining motion. Previously, we computationally determined how best to design and use an ISL such that rotational and translational errors in locating the F-E and LR axes were minimized [3]. However, this ISL was not constructed and therefore its ability to measure changes in the axes has not been validated. Therefore the objective was to construct the ISL and quantify the errors in measuring changes in position and orientation of the F-E axis.

Sensitivity analysis of a six degrees of freedom displacement measuring device

2013 ◽  
Vol 228 (1) ◽  
pp. 158-168 ◽  
Author(s):  
Andrea Mura
Keyword(s):  
Sensitivity Analysis ◽  
Performance Analysis ◽  
Degrees Of Freedom ◽  
Stewart Platform ◽  
Inverse Kinematic ◽  
Measuring Device ◽  
Six Degrees Of Freedom ◽  
Geometrical Characteristics

Object of this paper is the performance analysis of a six degrees of freedom measuring device based on a modified Stewart platform structure. Because of the device studied in this work represents a novel application of a Stewart like platform, an investigation about its performance has been done, in order to evaluate both behaviour and characteristics of this device in different geometrical configurations. In particular, sensitivity analysis has been carried on about geometrical characteristics and displacements amplitude. To calculate the sensitivity, the inverse kinematic equations of the device have been obtained.

scholarly journals Trueness of full-arch IO scans estimated based on 3D translational and rotational deviations of single teeth—an in vitro study

2021 ◽  
Author(s):  
Johanna Radeke ◽  
Annike B. Vogel ◽  
Falko Schmidt ◽  
Fatih Kilic ◽  
Stefan Repky ◽  
...  
Keyword(s):  
Degrees Of Freedom ◽  
In Vitro Study ◽  
Confocal Laser ◽  
Anterior Crowding ◽  
Six Degrees Of Freedom ◽  
Staff Members ◽  
Total Displacement ◽  
Dental Staff ◽  
Novel Method

Abstract Objectives To three-dimensionally evaluate deviations of full-arch intraoral (IO) scans from reference desktop scans in terms of translations and rotations of individual teeth and different types of (mal)occlusion. Materials and methods Three resin model pairs reflecting different tooth (mal)positions were mounted in the phantom head of a dental simulation unit and scanned by three dentists and three non-graduate investigators using a confocal laser IO scanner (Trios 3®). The tooth-crown surfaces of the IO scans and reference scans were superimposed by means of best-fit alignment. A novel method comprising the measurement of individual tooth positions was used to determine the deviations of each tooth in the six degrees of freedom, i.e., in terms of 3D translation and rotation. Deviations between IO and reference scans, among tooth-(mal)position models, and between dentists and non-graduate investigators were analyzed using linear mixed-effects models. Results The overall translational deviations of individual teeth on the IO scans were 76, 32, and 58 µm in the lingual, mesial, and intrusive directions, respectively, resulting in a total displacement of 114 µm. Corresponding rotational deviations were 0.58° buccal tipping, 0.04° mesial tipping, and 0.14° distorotation leading to a combined rotation of 0.78°. These deviations were the smallest for the dental arches with anterior crowding, followed by those with spacing and those with good alignment (p < 0.05). Results were independent of the operator’s level of education. Conclusions Compared to reference desktop scans, individual teeth on full-arch IO scans showed high trueness with total translational and rotational deviations < 115 µm and < 0.80°, respectively. Clinical relevance Available confocal laser IO scanners appear sufficiently accurate for diagnostic and therapeutic orthodontic applications. Results indicate that full-arch IO scanning can be delegated to non-graduate dental staff members.

Use of 1DOF Haptic Device for Remote-Controlled 6DOF Assembly

2014 ◽  
Vol 8 (3) ◽  
pp. 452-459 ◽  
Author(s):  
Ryoya Kamata ◽  
◽  
Ryosuke Tamura ◽  
Satoshi Niitsu ◽  
Hiroshi Kawaharada ◽  
...  
Keyword(s):  
Degrees Of Freedom ◽  
Force Feedback ◽  
Haptic Device ◽  
Prototype System ◽  
Assembly Operation ◽  
Six Degrees Of Freedom ◽  
Controlled Assembly ◽  
Sense Of Reality ◽  
Position And Orientation ◽  
Assembly Operations

This paper describes a remote controlled assembly using a haptic device. Most haptic devices have six Degrees Of Freedom (DOFs) for a higher sense of reality. However, for assembly operation, the simultaneous motion of parts with only one or two DOFs is required, and force feedback to operators is used only to maintain contact and detect collisions among parts. This leads to the possibility of assembly operations using a haptic device with a small number of DOFs. In this paper, we propose virtual planes to perform remote control of a 6DOF assembly by way of 1DOF user operations. Virtual planes separate the DOFs for user operation and for automatically generated motions that complement the user operation DOF in each assembly operation. A prototype system was developed with a 6DOF manipulator and camera. The system allows an operator to place virtual planes in any position and orientation using a camera image of the workspace. The experiment results showed the effectiveness of the method for remote controlled assembly without geometry information on the parts.

Modeling and Control of Four-bar Mechanism with Series Elastic Actuators

2020 ◽  
Author(s):  
Felipe R. Lopes ◽  
Marco A. Meggiolaro
Keyword(s):  
Human Interaction ◽  
Robotic Manipulation ◽  
Modeling And Control ◽  
Lqr Control ◽  
In Series ◽  
Flexible Behavior ◽  
Series Elastic Actuators ◽  
New Generation ◽  
And Control ◽  
Series Elastic

A new generation of robots that work in cooperation with humans (called collaborative robots) needs some flexibility to adapt to the environment and activities with people. That is why the Series Elastic Actuator (SEA) has been a breakthrough in actuator technologies. The idea of inserting an elastic element in series with a motor allows a lower output impedance, consequently a flexible behavior in the manipulator, in addition to providing torque feedback to better compensate disturbances caused e.g. by friction losses. This article presents a four-bar mechanism with SEA for the purpose of robotic manipulation. Its kinematics and dynamicsare studied, as well as its regulation and trajectory control. The behavior of the decoupled four-bar mechanism and the characteristics of the SEA are also analyzed. Then the regulation control of the complete system is carried out using LQR control. Finally, a circular trajectory is controlled in a simulation to validate the proposed control strategy. The simulation results show the effectiveness of the proposed controller for the mechanism in the presence of SEAs estimating torque and providing the desired compliance for human interaction.

Kinematic model to control the end-effector of a continuum robot for multi-axis processing

Robotica ◽  
2015 ◽  
Vol 35 (1) ◽  
pp. 224-240 ◽  
Author(s):  
Salvador Cobos-Guzman ◽  
David Palmer ◽  
Dragos Axinte
Keyword(s):  
Degrees Of Freedom ◽  
Kinematic Model ◽  
Euler Angle ◽  
Inverse Kinematic ◽  
End Effector ◽  
Six Degrees Of Freedom ◽  
Hazardous Environments ◽  
Continuum Robot ◽  
Novel Method ◽  
Six Dof

SUMMARYThis paper presents a novel kinematic approach for controlling the end-effector of a continuum robot for in-situ repair/inspection in restricted and hazardous environments. Forward and inverse kinematic (IK) models have been developed to control the last segment of the continuum robot for performing multi-axis processing tasks using the last six Degrees of Freedom (DoF). The forward kinematics (FK) is proposed using a combination of Euler angle representation and homogeneous matrices. Due to the redundancy of the system, different constraints are proposed to solve the IK for different cases; therefore, the IK model is solved for bending and direction angles between (−π/2 to +π/2) radians. In addition, a novel method to calculate the Jacobian matrix is proposed for this type of hyper-redundant kinematics. The error between the results calculated using the proposed Jacobian algorithm and using the partial derivative equations of the FK map (with respect to linear and angular velocity) is evaluated. The error between the two models is found to be insignificant, thus, the Jacobian is validated as a method of calculating the IK for six DoF.

Sign in / Sign up

Export Citation Format

Share Document