Thermal Performance Evaluation of Textile Waste as an Alternative Solution for Heat Transfer Reduction in Buildings

2018 ◽  
Vol 140 (2) ◽  
Author(s):  
Ayoub Gounni ◽  
Mohamed El Wazna ◽  
Mustapha El Alami ◽  
Abdeslam El Bouari ◽  
Omar Cherkaoui ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Surface Temperature ◽  
Thermal Insulation ◽  
Thermal Performance ◽  
Air Permeability ◽  
Heat Fluxes ◽  
Insulation Material ◽  
Potential Applicability ◽  
Building Walls ◽  
Wall Surface Temperature

The potential applicability of a developed recycled textile material, based on acrylic spinning waste, as thermal insulation is conducted. The prepared acrylic spinning waste (AS) is thermo-physically characterized in terms of density, air permeability, and thermal conductivity. The results show that the density and air permeability are 10.583 kg/m3 and 1100 L/m2/s, respectively. In addition, the thermal conductivity is found to be 38.27 mW/(m K). The developed thermal insulator is then tested in a thermally controlled reduced scale cavity. Two walls of the cavity are outfitted with AS at two different locations and compared to the walls without AS. The comparison is made based on the wall surface temperature and heat flux. A reduction in surface temperature is observed in the walls outfitted with AS, compared to wall without AS. Indeed, compared to a control wall, the peak heat fluxes are reduced by 27.23% and 18.67%, respectively, related to the walls with AS at location 1 and location 2. The obtained results show that the AS is a competitive thermal insulation material and can increase the thermal performance of the building walls.

Analysis of Thermal Performance of a New Regenerated Glass Pumice External Wall Insulation System in Hot Summer and Cold Winter Zone

2013 ◽  
Vol 671-674 ◽  
pp. 1791-1795
Author(s):  
Qian Gu ◽  
Sheng Ren ◽  
Yue Wang ◽  
Hao Luo
Keyword(s):  
Thermal Insulation ◽  
Thermal Performance ◽  
Insulation Material ◽  
Cold Winter ◽  
Insulation System ◽  
External Wall ◽  
Finite Element Software ◽  
Building Walls ◽  
Insulation Performance ◽  
The Heat Transfer Coefficient

The thermal performance of a new regenerated glass pumice board as external wall thermal insulation material was analyzed in this paper. Considering the roles of solar radiation and air convection, and selecting Wuhan city as an example of the hot summer and cold winter zones, the temperature field distributions of the external building walls in different orientations in summer and winter seasons were numerically simulated by using the finite element software ANSYS. The thermal performance of regenerated glass pumice exterior wall external insulation system including the heat transfer coefficient and the temperature distribution was evaluated. The simulation results demonstrate the good thermal insulation performance of the regenerated glass pumice as a new kind of external wall materials, and the feasibility of the application of this environmentally friendly material to the wall insulation system in energy conservation building is also promoted.

Development, characterization and thermal performance of insulating nonwoven fabrics made from textile waste

2018 ◽  
Vol 48 (7) ◽  
pp. 1167-1183 ◽  
Author(s):  
Mohamed EL Wazna ◽  
Ayoub Gounni ◽  
Abdeslam EL Bouari ◽  
Mustapha EL Alami ◽  
Omar Cherkaoui
Keyword(s):  
Thermal Conductivity ◽  
Surface Temperature ◽  
Thermal Performance ◽  
Textile Waste ◽  
Insulation Materials ◽  
Nonwoven Fabrics ◽  
Building Insulation ◽  
Needle Punching ◽  
Potential Applicability ◽  
Insulation Performance

This paper reports a study on potential applicability of nonwoven samples made from textiles waste in building industries. Four nonwoven fabrics based on acrylic and wool waste were made using the needle punching technique, and tested in terms of thermo-physical properties. Results show that all developed nonwovens have an excellent insulation performance, the thermal conductivity is in the range of 0.03476–0.04877 W/(m·K); these values are comparable with that of conventional insulation materials. The lowest value of the thermal conductivity is observed for the nonwoven made from washed wool Wr (0.03476 W/m.K). In order to evaluate the thermal performance of manufactured nonwoven, a reduced-scale thermally controlled cavity was used; each wall of the cavity is outfitted with one nonwoven. The comparison is based on the outside surface temperature walls. The fixed inside surface temperature was 36 ℃; however, the outside surface temperature was less than 19 ℃. This result is in accordance with the obtained thermal conductivity values and confirms that materials based on textile waste have competitive thermal properties and could be used in building insulation materials.

Cryogenic thermal insulating and mechanical properties of rigid polyurethane foams blown with hydrofluoroolefin: Effect of perfluoroalkane

2021 ◽  
pp. 0021955X2110626
Author(s):  
Tae Seok Kim ◽  
Yeongbeom Lee ◽  
Chul Hyun Hwang ◽  
Kwang Ho Song ◽  
Woo Nyon Kim
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Thermal Stability ◽  
Cell Size ◽  
Thermal Insulation ◽  
Coefficient Of Thermal Expansion ◽  
Lower Surface ◽  
Polyurethane Foams ◽  
Insulation Material ◽  
Pu Foams

The effect of perfluoroalkane (PFA) on the morphology, thermal conductivity, mechanical properties and thermal stability of rigid polyurethane (PU) foams was investigated under ambient and cryogenic conditions. The PU foams were blown with hydrofluorolefin. Morphological results showed that the minimum cell size (153 μm) was observed when the PFA content was 1.0 part per hundred polyols by weight (php). This was due to the lower surface tension of the mixed polyol solution when the PFA content was 1.0 php. The thermal conductivity of PU foams measured under ambient (0.0215 W/mK) and cryogenic (0.0179 W/mK at −100°C) conditions reached a minimum when the PFA content was 1.0 php. The low value of thermal conductivity was a result of the small cell size of the foams. The above results suggest that PFA acted as a nucleating agent to enhanced the thermal insulation properties of PU foams. The compressive and shear strengths of the PU foams did not appreciably change with PFA content at either −170°C or 20°C. However, it shows that the mechanical strengths at −170°C and 20°C for the PU foams meet the specification. Coefficient of thermal expansion, and thermal shock tests of the PU foams showed enough thermal stability for the LNG carrier’s operation temperature. Therefore, it is suggested that the PU foams blown by HFO with the PFA addition can be used as a thermal insulation material for a conventional LNG carrier.

scholarly journals Thermal Performance of Oil Palm Fibre and Paper Pulp as the Insulation Materials

2014 ◽  
Vol 5 (2) ◽  
pp. 22-28
Author(s):  
S.H. Ibrahim ◽  
Sia W.K. ◽  
A. Baharun ◽  
M.N.M. Nawi ◽  
R. Affandi
Keyword(s):  
Thermal Conductivity ◽  
Thermal Performance ◽  
Oil Palm ◽  
Total Density ◽  
Insulation Material ◽  
Paper Pulp ◽  
Particle Board ◽  
Environment Impact ◽  
Palm Fiber ◽  
Insulation Materials

 Energy consumption for residential use in Malaysia is keep increasing yearly in order to maintain the internal thermal comfort of the building. Roof insulation material plays a vital role in improving the thermal comforts of the building while reduce the cooling load of the building. Oil palm industry in Malaysia had grown aggressively over the past few decades. Tons of oil palm waste had produced during the process such as empty fruit bunch fiber. Another waste material that available and easy to obtain is paper. Paper is a valuable material that can be recycled. Waste paper comes from different sources such as newspaper, office and printing papers. This study will take advantage of the available resources which could contribute to reduce the environment impact. The aim of this study is to investigate the thermal performance of roof insulation materials using mixture of oil palm fiber and paper pulp with different ratio and thickness. This study found that the thermal performance of the paper pulp is slightly better compare to the oil palm fiber. Thermal conductivity of the particle board reduces around 4.1% by adding the 10% of paper pulp into the total density of the particle board. By adding 75% of paper pulp, the thermal conductivity of the particle board could be reduced to 24.6% compare to the oil palm fiber board under the similar condition. Therefore, from this study, it could be concluded that paper pulp has high potential to be used as a building insulation material.

Unused Plant Waste and Thermal Insulation Composition Boards on their Basis

2021 ◽  
Vol 887 ◽  
pp. 480-486
Author(s):  
T.N. Vachnina ◽  
I.V. Susoeva ◽  
A.A. Titunin ◽  
S.V. Tsybakin
Keyword(s):  
Thermal Conductivity ◽  
Thermal Insulation ◽  
Wood Fiber ◽  
Mineral Wool ◽  
Wood Waste ◽  
Insulation Material ◽  
Plant Fibers ◽  
Coefficient Of Thermal Conductivity ◽  
Plant Waste ◽  
Technology Of Production

Many plant wastes are not currently used in production, they are disposed of in landfills or incinerated. The aim of this study is to develop a composite thermal insulation material from unused spinning waste of flax and cotton fibers and soft wood waste. Samples of thermal insulation materials from plant waste were made by drying using the technology of production of soft wood fiber boards. For composite board defined physico-mechanical characteristics and thermal conductivity. The experiment was carried out according to a second-order plan, regression models of the dependences of the material indicators on the proportion of the binder additive, drying temperature and the proportion of wood waste additives were developed. The study showed that composites from unused spinning waste of plant fibers and soft wood waste have the necessary strength under static bending, the swelling in thickness after staying in water is much lower in comparison with the performance of boards from other plant fillers. The coefficient of thermal conductivity of the boards is comparable with the indicator for mineral wool boards.

The Development and Application of Non-Shrinking Composite Silicate Insulation Material

2013 ◽  
Vol 772 ◽  
pp. 178-181
Author(s):  
Yong Liang Zhan ◽  
Hai Yang Chen ◽  
Xing Hua Hou ◽  
Fei He
Keyword(s):  
Thermal Conductivity ◽  
High Temperature ◽  
Production Process ◽  
Thermal Insulation ◽  
Raw Materials ◽  
Drying Shrinkage ◽  
Structural Member ◽  
Insulation Material ◽  
Technical Performance

Non-shrinking composite silicate insulation material has advantages of low drying shrinkage, density, thermal conductivity and good thermal insulation which withstands high temperature and militates in favor of specially shaped structural member construction, etc. This article describes raw materials and the production process of the above material, discusses thermal insulation characteristics, technical performance and the features of use and particularizes the application effect in the project.

Study and Application of Plastic Construction Materials

2011 ◽  
Vol 99-100 ◽  
pp. 1117-1120 ◽  
Author(s):  
Mao Quan Xue
Keyword(s):  
Thermal Conductivity ◽  
Corrosion Resistance ◽  
Energy Saving ◽  
Thermal Insulation ◽  
Flame Retardancy ◽  
Building Materials ◽  
Construction Materials ◽  
Low Thermal Conductivity ◽  
Building Walls

As new building materials, plastic has light weigh, corrosion resistance, low thermal conductivity, thermal insulation, waterproof, energy-saving, molding convenient, high recycling characteristic, widely used in building materials. According to the research of improving its flame retardancy, strength, thermal insulation, waterproof properties, the application of plastic use in doors and windows, pipeline, building walls and roofs of buildings, etc. were reviewed, and the developing direction was discussed.

Effect of Operating Temperatures on Thermal Conductivity of Polystyrene Insulation Material: Impact on Envelope-Induced Cooling Load

2014 ◽  
Vol 564 ◽  
pp. 315-320 ◽  
Author(s):  
Maatouk Khoukhi ◽  
Mahmoud Tahat
Keyword(s):  
Thermal Conductivity ◽  
Thermal Insulation ◽  
Energy Performance ◽  
Building Envelope ◽  
Insulation Material ◽  
Cooling Load ◽  
Thermal Insulation Material ◽  
Insulation Materials ◽  
Energy Performance Of Buildings ◽  
The Impact

The impact of the thermal conductivity (k-value) change of polystyrene insulation material in building envelope due to changes in temperature on the thermal and energy performance of a typical residential building under hot climate is investigated. Indeed, the thermal and energy performance of buildings depends on the thermal characteristics of the building envelope, and particularly on the thermal resistance of the insulation material used. The thermal insulation material which is determined by its thermal conductivity, which describes the ability of heat to flow cross the material in presence of a gradient of temperature, is the main key to assess the performance of the thermal insulation material. When performing the energy analysis or calculating the cooling load for buildings, we use published values of thermal conductivity of insulation materials, which are normally evaluated at 24°C according to the ASTM standards. In reality, thermal insulation in building is exposed to significant and continuous temperature variations, due essentially to the change of outdoor air temperature and solar radiation. Many types of insulation materials are produced and used in Oman, but not enough information is available to evaluate their performance under the prevailing climatic condition. The main objective of this study is to investigate the relationship between the temperature and thermal conductivity of various densities of polystyrene, which is widely used as building insulation material in Oman. Moreover, the impact of thermal conductivity variation with temperature on the envelope-induced cooling load for a simple building model is discussed. This work will serve as a platform to investigate the effect of the operating temperature on thermal conductivity of other building material insulations, and leads to more accurate assessment of the thermal and energy performance of buildings in Oman.

A Novel Building Thermal Insulation Material: Expanded Perlite Modified by Aerogel

2011 ◽  
Vol 250-253 ◽  
pp. 507-512
Author(s):  
Zi Sheng Wang ◽  
Hao Chi Tu ◽  
Jin Xiu Gao ◽  
Guo Dong Qian ◽  
Xian Ping Fan ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Mechanical Property ◽  
Thermal Insulation ◽  
Production Cost ◽  
Building Materials ◽  
Low Cost ◽  
Insulation Material ◽  
Expanded Perlite ◽  
Thermal Insulation Material ◽  
Supercritical Fluid Drying

Aerogel is regarded as one kind of super thermal insulation materials which could be large-scalely used as building materials. However, the aerogel’s production cost and poor mechanical property limit the its applications. In this paper, we put forward a new low cost way to produce a novel building thermal insulation material: synthesized the aerogel within the expanded perlite’s pores, and using sodium silicate as precursor without adopting supercritical fluid drying and surface modification. The thermal conductivity of expanded perlite was successfully decreased after modified by aerogel.

scholarly journals Rigid Polyurethane Foam Thermal Insulation Protected with Mineral Intumescent Mat

2014 ◽  
Vol 14 (4) ◽  
pp. 259-269 ◽  
Author(s):  
Mikelis Kirpluks ◽  
Ugis Cabulis ◽  
Viesturs Zeltins ◽  
Laura Stiebra ◽  
Andris Avots
Keyword(s):  
Thermal Conductivity ◽  
Thermal Insulation ◽  
Flame Retardants ◽  
Health Hazard ◽  
Expandable Graphite ◽  
Main Concern ◽  
Insulation Material ◽  
Pu Foam ◽  
Fibre Products ◽  
Pu Foams

Abstract One of the biggest disadvantages of rigid polyurethane (PU) foams is its low thermal resistance, high flammability and high smoke production. Greatest advantage of this thermal insulation material is its low thermal conductivity (λ), which at 18-28 mW/(m•K) is superior to other materials. To lower the flammability of PU foams, different flame retardants (FR) are used. Usually, industrially viable are halogenated liquid FRs but recent trends in EU regulations show that they are not desirable any more. Main concern is toxicity of smoke and health hazard form volatiles in PU foam materials. Development of intumescent passive fire protection for foam materials would answer problems with flammability without using halogenated FRs. It is possible to add expandable graphite (EG) into PU foam structure but this increases the thermal conductivity greatly. Thus, the main advantage of PU foam is lost. To decrease the flammability of PU foams, three different contents 3%; 9% and 15% of EG were added to PU foam formulation. Sample with 15% of EG increased λ of PU foam from 24.0 to 30.0 mW/(m•K). This paper describes the study where PU foam developed from renewable resources is protected with thermally expandable intumescent mat from Technical Fibre Products Ltd. (TFP) as an alternative to EG added into PU material. TFP produces range of mineral fibre mats with EG that produce passive fire barrier. Two type mats were used to develop sandwich-type PU foams. Also, synergy effect of non-halogenated FR, dimethyl propyl phosphate and EG was studied. Flammability of developed materials was assessed using Cone Calorimeter equipment. Density, thermal conductivity, compression strength and modulus of elasticity were tested for developed PU foams. PU foam morphology was assessed from scanning electron microscopy images.

Sign in / Sign up

Export Citation Format

Share Document