Free Vibration Analysis of Functionally Graded Plates on Two-Parameter Elastic Supports and in Contact With Stationary Fluid

2017 ◽  
Vol 140 (2) ◽  
Author(s):  
Arash Shahbaztabar ◽  
Ahmad Rahbar Ranji
Keyword(s):  
Free Vibration ◽  
Vibration Analysis ◽  
Volume Fraction ◽  
Free Vibration Analysis ◽  
Functionally Graded ◽  
Rectangular Plates ◽  
Power Law Distribution ◽  
Fg Plates ◽  
The Impact ◽  
Two Parameter

Free vibration analysis of functionally graded (FG) rectangular plates on two-parameter elastic foundation and vertically coupled with fluid is the objective of this work. The fluid domain is considered to be infinite in length, but it is bounded in depth and width directions, and the effects of hydrostatic pressure and free surface waves are not taken into account. The mechanical properties of the FG plates are assumed to vary continuously through the thickness direction according to a power-law distribution of the volume fraction of the constituents. The accuracy and applicability of the formulation is illustrated by comparison studies with those reported in the open literature. At the end, parametric studies are carried out to examine the impact of different parameters on the natural frequencies.

Free Vibration Analysis of Composite Material Plates "Case of a Typical Functionally Graded FG Plates Ceramic/Metal" with Porosities

2019 ◽  
Vol 25 ◽  
pp. 69-83 ◽  
Author(s):  
Slimane Merdaci
Keyword(s):  
Free Vibration ◽  
Shear Deformation ◽  
Vibration Analysis ◽  
Equations Of Motion ◽  
Porous Plate ◽  
Shear Deformation Theory ◽  
Free Vibration Analysis ◽  
Functionally Graded ◽  
Simply Supported ◽  
Fg Plates

This article presents the free vibration analysis of simply supported plate FG porous using a high order shear deformation theory. In is work the material properties of the porous plate FG vary across the thickness. The proposed theory contains four unknowns unlike the other theories which contain five unknowns. This theory has a parabolic shear deformation distribution across the thickness. So it is useless to use the shear correction factors. The Hamilton's principle will be used herein to determine the equations of motion. Since, the plate are simply supported the Navier procedure will be retained. To show the precision of this model, several comparisons have been made between the present results and those of existing theories in the literature for non-porous plates. Effects of the exponent graded and porosity factors are investigated.

Bending, Buckling and Free Vibration Analysis of Size-Dependent Nanoscale FG Beams Using Refined Models and Eringen’s Nonlocal Theory

2020 ◽  
Vol 12 (01) ◽  
pp. 2050007 ◽  
Author(s):  
Atteshamuddin S. Sayyad ◽  
Yuwaraj M. Ghugal
Keyword(s):  
Free Vibration ◽  
Vibration Analysis ◽  
Volume Fraction ◽  
Constitutive Relations ◽  
Free Vibration Analysis ◽  
Functionally Graded ◽  
Bottom Surface ◽  
Solution Technique ◽  
Small Scale ◽  
Nonlocal Beam

In this study, a theoretical unification of twenty-one nonlocal beam theories are presented by using a unified nonlocal beam theory. The small-scale effect is considered based on the nonlocal differential constitutive relations of Eringen. The present unified theory satisfies traction free boundary conditions at the top and bottom surface of the nanobeam and hence avoids the need of shearing correction factor. Hamilton’s principle is employed to derive the equations of motion. The present unified nonlocal formulation is applied for the bending, buckling and free vibration analysis of functionally graded (FG) nanobeams. The elastic properties of FG material vary continuously by gradually changing the volume fraction of the constituent materials in the thickness direction. Closed-form analytical solutions are obtained by using Navier’s solution technique. Non-dimensional displacements, stresses, natural frequencies and critical buckling loads for FG nanobeams are presented. The numerical results presented in this study can be served as a benchmark for future research.

FREE VIBRATION OF FUNCTIONALLY GRADED PLATES WITH A HIGHER-ORDER SHEAR AND NORMAL DEFORMATION THEORY

2013 ◽  
Vol 13 (01) ◽  
pp. 1350004 ◽  
Author(s):  
D. K. JHA ◽  
TARUN KANT ◽  
R. K. SINGH
Keyword(s):  
Free Vibration ◽  
Material Properties ◽  
Deformation Theory ◽  
Numerical Solutions ◽  
Volume Fraction ◽  
Free Vibration Analysis ◽  
Higher Order ◽  
Functionally Graded ◽  
Normal Deformation ◽  
Fg Plates

Free vibration analysis of functionally graded elastic, rectangular, and simply supported (diaphragm) plates is presented based on a higher-order shear and normal deformation theory (HOSNT). Although functionally graded materials (FGMs) are highly heterogeneous in nature, they are generally idealized as continua with mechanical properties changing smoothly with respect to the spatial coordinates. The material properties of functionally graded (FG) plates are assumed here to be varying through the thickness of the plate in a continuous manner. The Poisson ratios of the FG plates are assumed to be constant, but their Young's modulii and densities vary continuously in the thickness direction according to the volume fraction of constituents which is mathematically modeled as a power law function. The equations of motion are derived using Hamilton's principle for the FG plates on the basis of a HOSNT assuming varying material properties. Numerical solutions are obtained by the use of Navier solution method. The accuracy of the numerical solutions is first established through comparison with the exact three-dimensional (3D) elasticity solutions and the present solutions are then compared with available solutions of other models.

3-D Free Vibration Analysis of Functionally Graded Thick Circular and Annular Plates on Elastic Foundation

2010 ◽  
Author(s):  
Vahid Tajeddini ◽  
Abdolreza Ohadi ◽  
Mojtaba Sadighi
Keyword(s):  
Free Vibration ◽  
Boundary Conditions ◽  
Vibration Analysis ◽  
Ritz Method ◽  
Three Dimensional ◽  
Free Vibration Analysis ◽  
Small Strain ◽  
Functionally Graded ◽  
Different Boundary Conditions ◽  
Fg Plates

This paper describes a study of three-dimensional free vibration analysis of thick circular and annular functionally graded (FG) plates resting on Pasternak foundation. The formulation is based on the linear, small strain and exact elasticity theory. Plates with different boundary conditions are considered and the material properties of the FG plate are assumed to vary continuously through the thickness according to power law. The kinematic and the potential energy of the plate-foundation system are formulated and the polynomial-Ritz method is used to solve the eigenvalue problem. Convergence and comparison studies are done to demonstrate the correctness and accuracy of the present method. With respect to geometric parameters, elastic coefficients of foundation and different boundary conditions some new results are reported which maybe used as a benchmark solution for future researches.

Free vibration analysis of rotating functionally graded material plate under nonlinear thermal environment using higher order shear deformation theory

2018 ◽  
Vol 233 (6) ◽  
pp. 2056-2073 ◽  
Author(s):  
S Parida ◽  
SC Mohanty
Keyword(s):  
Free Vibration ◽  
Functionally Graded Material ◽  
Vibration Analysis ◽  
Deformation Theory ◽  
Volume Fraction ◽  
Thermal Environment ◽  
Shear Deformation Theory ◽  
Free Vibration Analysis ◽  
Functionally Graded ◽  
Graded Material

In the present article, a higher order shear deformation theory is used to develop a finite element model for the free vibration analysis of a rotating functionally graded material plate in the thermal environment. The model is based on an eight-noded isoparametric element with seven degrees-of-freedom per node. The material properties are temperature dependent and graded along its thickness according to a simple power law distribution in terms of volume fraction of the constituents. The general displacement equation provides C0 continuity, and the transverse shear strain undergoes parabolic variation through the thickness of the plate. Therefore, the shear correction factor is not used in this theory. The obtained results are compared with the published results in the literature to determine the accuracy of the method. The effects of various parameters like hub radius, rotation speed, aspect ratio, thickness ratio, volume fraction index, and temperature on the frequency of rotating plate are investigated.

Sign in / Sign up

Export Citation Format

Share Document